#RememberShafilea: Honor Killing Victim Shafilea Ahmed Remembered Through 3D Printed Sculpture Linked to Tweets

3DPrint.com

Back in September of 2003, a young woman by the name of Shafilea Ahmed was murdered by her parents, Iftikhar and Farzana Ahmed, for the mere fact that she refused to marry a man... View the entire article via our website. 3D Design 3D Printing #remembershafilea honor killings karma nirvana remember shafilea shafilea ahmed tweets twitter

Aero Kinetics & SLM Solutions Bring 3D Metal Printing to Commercial Unmanned Aircraft

3DPrint.com

Hulsey Smith in 2003, and they’re now... View the entire article via our website. 3D Design 3D Printing 3D Printing Materials Business 3d printed aerospace applications 3d printed drones 3d printed UAS Aero Kinetics James Fendrick SLM Solutions 3d metal printing W. Aero Kinetics is an Aerospace and Defense firm, and one of their key business units is focused on Unmanned Aircraft Systems. The company was founded by W.

SLM 87

Trending Sources

T3D's Mobile Phone-Activated SLA 3D Printer is Only $169 on Kickstarter

3DPrint.com

In 2008 (priority in 2003), NTUST granted a US7320946B2 patent to use DLP for SLA 3D printer. 3D Printers 3D Printing Sponsored 3d printer kickstarter 3d printing crowdfunding kickstarter mobile phone National Taiwan University sla 3d printer T3DT3D is a startup spin-off from National Taiwan University of Science and Technology (NTUST). Since 2012, View the entire article via our website.

Founders of Arduino Take Back Their Company, Musto Replaced as CEO

3DPrint.com

Whether you dabble in 3D printed electronics or are passionate about numerous, intricate projects, you are likely familiar with Arduino. Begun as a project in 2003 for Italian students, the. 3D Printing Business 3D printing and electronics adafruit Arduino Arduino electronics boards Arduino Mega Arduino microprocessors DIY 3D printing industry news open-source electronics

‘3D Printing the Future’ Exhibit Opens at Museum of Design Atlanta

3DPrint.com

The museum once known as the Atlanta International Museum of Art & Design changed its name in 2003 to the Museum of Design Atlanta, allowing itself the clever acronym of MODA (which means ‘fashion’... View the entire article via our website.

Exclusive: CIPRES Brings Color to All SLS with New Sm@rt E-coloring Solution

3D Printing Industry

A few weeks ago, after covering a story about EOS getting directly involved with the SLS coloring business, I was contacted by Carlos Prestien from CIPRES Technology Solutions, one of the leading rapid prototyping and 3D printing services in Germany, active since 2003. By Davide Sher.

EOS 114

Using 3D Printing to Create Artisan Jewelry

i.materialise

One of the co-designers at Maria Piana, Constantino Papaconstantinou, walked us through the brand’s creative and technical processes to design and create 3D printed jewelry. This has allowed Constantino to design and print more complex pieces. From a paper concept to a printed reality.

Toyze Hits One Million 3D Printable Models. The Game Is On.

3D Printing Industry

While it only took Apple’s iTunes one week to reach one million downloadable songs sold in 2003, that was a large venture by an already huge company entering the already mass market segment of music. appeared first on 3D Printing Industry. By Davide Sher.

David 113

USF and nScrypt Show How 3D Printed Circuit Structures Can Replace PCBs

Additive Manufacturing

Combining 3D printing and printed electronics, the team designed a unique structural build with printed electronics materials as part of the structure, or housing. Specifically, the IFA was printed in the XZ plane, not the XY plane.

Olivetti to Sell 3D Printers in Europe

3D Printing Industry

Olivetti, which has been part of the giant Telecom Italia Group since 2003, was one of the companies leading technological innovation and automation in Italy throughout the 70’s and 80’s.… … The original post Olivetti to Sell 3D Printers in Europe appeared first on 3D Printing Industry. 3D Printers 3D Printing Business Europe FDM/FFF News RetailBy Davide Sher.

You Can Now Buy Your Own Piece of Design History: The Lily.MGX Pushed 3D Printing from Prototyping to Design

i.materialise

In 2003, Finnish digital sculptor Janne Kyttanen presented a 3D print unlike any other to the audience of Milan Design Week. Until then, 3D printing was considered more of a prototyping technology. Furthermore, it had all the benefits of a 3D printed product.

NASA Models You Can Print

PrintSpace

For the space-enthusiast, this provides 21 new things to print for fun from the authority on space exploration. In 2003, we lost radio contact with it. Share This: The post NASA Models You Can Print appeared first on PrintSpace.

Popularity of FDM

Wohlers Talk

Since the early 2000s, fused deposition modeling (FDM), more formally referred to as material extrusion by ASTM and ISO, has been the most popular additive manufacturing and 3D printing process worldwide. 3D printing Additive Manufacturing Future

RepRap 184

3D Printing and Intelligent Mobility Partner to bring Innovations to the Railway

Stratasys Blog for a 3D World

When they partnered with SWU Verkehr GmbH in 2003, they had one main goal, and that was to keep vehicle availability as high as possible. The 3D printing process allows for parts customization, design freedom and easier integration of the newly produced parts.

CNBC Report: 3D Printing Patent “Gold Rush”

Law in the Making

My colleague, patent agent Matthew Powell , pointed me to a new article from CNBC ‘s Heesun Wee which sheds light on the flood of 3D printing-related patent applications being filed: From utilitarian processes to the final appearance of designed objects ranging from jewelry to spare machine parts, get ready for a patent land grab of 3-D intellectual property. Since 2003, the office has granted 3,500 patents related to 3-D printing.

Xida dives into 3D Printing

Sculpteo

XIDA, developers of Windows and mobile applications, recently extends their services into the 3D printing world. Since 2003, XIDA has been offering solutions for windows and mobile applications. Kobjolke explained that 3D printing offered a solution like none other for their project.

New to 3D Printing?: 8 Basic Facts

i.materialise

In honor of our upcoming “October 2014 3D Print Meet-up” in Belgium , we’ve compiled a list of beginner-friendly, interesting facts about 3D printing! This non-computer technique preceeded 3D printing. 3D Printing Started in the ‘80s.

Visit 3T at APS Meetings in Lyon, France

Rapid Prototyping News UK

3T RPD will be attending the APS Meetings event on Tuesday 20 and Wednesday 21 March at the Espace Tête d’Or in Lyon, France – the first and only business convention for AM (Additive Manufacturing), 3D Printing, Rapid Prototyping and New Product Development. We proudly hold AS 9100 Rev C for the production of metal parts using AM, as well as ISO 9001:2008 and ISO 13485:2003 Medical Devices accreditations. Come and see us on stand 23 at this years’ APS Meeting in Lyon, France.

An Intro to (our) 3D Printing Technologies: Fused Deposition Modeling

i.materialise

Contrary to popular belief, there’s not a one-size-fits-all approach to 3D printing. In general, 3D printing technologies can be split up into 2 groups: direct and indirect 3D printing. Printing Sizes. The Printing Size of ABS.

A Short History of 3T RPD

Rapid Prototyping News UK

Since its establishment in 1999 3T RPD has been at the forefront of Additive Manufacturing (AM), which is also sometimes known as 3D printing. 2003 – The company opens its in-house spray shop which is the forerunner of our extensive metals and plastics finishing capabilities today.

EOS 69

nScrypt Launches First and Only Ruggedized Precision 3D Printer/Bioprinter

Additive Manufacturing

nScrypt is now launching the nRugged , the first and only precision 3D printing/bioprinting platform for harsh environments. The bioprinter configuration can print both biologics and non-biologics. Roll it into position, remove the top, plug it together, and start printing.

Oventus Launches Cutting-Edge 3D Printing Facility

Additive Manufacturing

Brisbane based medical device company, Oventus Medical launched their new Victorian 3D printing facility at CSIRO on 8 December. The Minister for Innovation, Industry and Science, the Hon Greg Hunt released a video message to applaud the opening of the Oventus 3D titantium printing facility.

Executive Insights @Disruptive: Avi Reichental, President and CEO, 3D Systems

3D Systems

Executive Insights @Disruptive: Avi Reichental, President and CEO, 3D Systems Thursday, May 7, 2015 - 13:13 The following is a guest blog authored by Avi Reichental, President and CEO, 3D Systems that appeared in Disruptive Magazine’s blog on the future of 3D printing.

Engaget Expand: 3D Printing Goes Mainstream

Tales of a 3D Printer

There were many wonderful things to see there, but I was most excited to see the presentation, " 3D Printing Goes Mainstream " with Hod Lipson, Professor of Engineering at Cornell University, Max Lobovsky, Co-Founder, FormLabs, and Avi Reichental, President & CEO of 3D Systems.

Aero Kinetics Joins with SLM Solutions to Bring 3D Metal Printing to Commercial Unmanned Aircraft

Additive Manufacturing

Incorporating Additive Metal Manufacturing for Aluminum and Titanium 3D Printed Parts. SLM and their technology help us deliver unmanned aircraft to our clients with the most advanced 3D printing technology.”.

SLM 80

Four Key Takeaways from the Wohlers Report 2015

Stratasys

It’s not easy to summarize a 300+ page report in the span of a blog post, especially one as thorough and educationally deep as Wohlers Report 2015 on the state of the 3D printing industry. More than twenty 3D printed implant products have achieved FDA clearance for use.

Digicom Electronics Brings Nitrogen into Soldering and…

Design 2 Part News

The addition of nitrogen, part of Digicom’s Diamond Track Manufacturing Processes, is said to minimize device failure and ensure printed circuit board integrity, especially for mission critical products for the medical, military and aerospace, industrial, and RF wireless industries.

Blueberries: 3D-Printed Jewelry that goes to Infinity and Beyond

i.materialise

In 2017, they launched their new collection, Infinity , and we wanted to know all about it, as well as the source of their inspiration and their passion for 3D printing. Warning: this interview can seriously inspire your 3D printing imagination! 3D Printing Jewelry

Beyond BIM Symposium – Innovations in Geometry and Collaboration

3D Perspectives

In 2003 with a colleague Fulcro Engineering services was established, and is now a leader in de-risking projects through use of collaborative process and digital design development and detailing, to enable risk-free assembly and construction. In the last decade, he has been at the forefront of large scale 3D printing and has worked with both ESA and NASA on 3D printed Moon and Mars habitats.

Felix 60

Wohlers Associates, Inc.-Production of Parts for Final Products is Now 34.7% of the Market for Additive Manufacturing

Additive Manufacturing

of the entire market for additive manufacturing (AM) and 3D printing—terms that are used interchangeably. Since 2003, this market segment has gone from less than 4% to more than one-third of total revenues from AM products and services worldwide.

Nano Dimension Appoints Avi Reichental to Board of Directors

Additive Manufacturing

a leader in the field of 3D printed electronics (NASDAQ, TASE: NNDM ) , announced today that Avi Reichental has joined its board of directors. Company Announces Additional Changes to Management. NESS ZIONA, Israel- April 24, 2017 – Nano Dimension Ltd.,

TCT Launch: new materials, machines and R&D team

Rapid Prototyping News UK

And we do this whilst pursuing the highest standards of excellence in our customer service and delivery, recognised by the quality standards we have been awarded; we were the first AM company in the UK to hold all three quality standards AS 9100 Rev C, ISO 9001:2008 and ISO 13485:2003. And our technical experts will be on our stand to answer all your questions about metal and plastic Additive Manufacturing/3D Printing

Bringing jobs back to America: Rebuilding manufacturing…

Design 2 Part News

In 1903, the Hershey plant was the largest manufacturing facility in the world and by 2003, more than 3,000 jobs were moved to Mexico. Other American brands followed that same trend: La-Z-Boy had moved their manufacturing sites to China and Mexico in 2001, by 2003 Levy Strauss had no plants in the U.S., 3D printing, automation, and CAD-CAM are just some of the ways that manufacturing technology is changing.

Manufacturing in the USA: The same story told from…

Design 2 Part News

Net annual job loss to offshoring went from around 200,000 in 2003 to zero today,” claims Reshoring Initiative in an infographic the organisation has produced. Automation / technology (including 3D printing ). “Manufacturing in the USA: The same story told from many angles” By David Edwards, Robotics & Automation News.

First FDA Approved Medicine Manufactured Using 3D Printing Technology Now Available

Additive Manufacturing

Food and Drug Administration (FDA) that is manufactured using 3D printing technology. SPRITAM is formulated with Aprecia’s proprietary ZipDose® Technology , which combines the precision of 3D printing and formulation science to produce rapidly disintegrating formulations of medications.

Designer Spotlight: Robert Krawczyk

Shapeways Blog

What brought you to 3D printing with Shapeways? If you weren’t limited by current technologies, what would you want to make using 3D printing? This week, in honor of the Back to School season, we are highlighting one of many professor/designer talents, Robert Krawczyk.

Turn 3D Scanning Into a Business

Shapeways Blog

She has been working with 3d laser scanners and printers since 2003. She has an MFA in Art & Technology studies from the School of the Art Institute of Chicago, and has experience in preparing prints for almost any 3D printing technology that you can think of.