RepRap: Blog: Big RepRap Refereed Journal Article

RepRap Blog

It is, of course, a scholarly engineering article intended for academics. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Thursday, April 14, 2011. Big RepRap Refereed Journal Article. We have just published a paper in the journal Robotica about how RepRap started, its development, and how it has got to where it is now. But it is - we hope - also a good read for everyone.

RepRap: Blog: Join us at 2014 Midwest RepRap Festival (MRRF.

RepRap Blog

3D PRINTING CHALLENGES See some of the most difficult prints take shape over the course of the weekend, and some fun printing challenges too, like the hand-fed extruder print challenge. RepRap: Blog.

RepRap: Blog: RS Components distributing RepRaps

RepRap Blog

For more details see RSs blog post here , and, of course, their catalogue here. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, December 02, 2013. RS Components distributing RepRaps.

RepRap: Blog: Rewriting history

RepRap Blog

Erik, of course, has done a superb job of estimating the World population of RepRaps together with RepRap-derived machines like MakerBots and 3D-Systems/BfBs. I, of course, replied that - like the other 7 billion of you - I didnt have a clue. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, April 18, 2011. Rewriting history.

RepRap: Blog: Reprap Prusa Iteration 2 Build Event in Cologne.

RepRap Blog

Signup by email, kliment.yanev @ gmail.com Included in the course price are all the parts as well as some plastic print material. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, November 27, 2011.

RepRap: Blog: Quality - Open Source for the Win (Part Deux)

RepRap Blog

It took a while under those conditions, of course - 5 hours. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, November 29, 2011. Quality - Open Source for the Win (Part Deux).

RepRap: Blog: A Tipping Point of Print Quality (Open Source for the.

RepRap Blog

Of course we have always had some people who had epic build quality for years now ( See Nophead ), the big change is that the barriers to entry have dropped significantly: Thanks the the new Volumetric Skeinforge (Skeinforge 41), and the fork of Skeinforge called SFact by Action68 (Ahmet Cem TURAN ) even makes the slicing of the models straight forward. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer.

RepRap: Blog: Announcing AMRI: Advanced Manufacturing.

RepRap Blog

As part of the mission of AMRI Rice, the Fellows will also take part in a 4-day Advances in Tissue Engineering Short Course where they will receive a 32-hr crash-course in all the very latest in tissue engineering research from thought leaders from around the world. RepRap: Blog.

RepRap: Blog: Surface-Oriented CAD, Math, & Telescopes

RepRap Blog

Some people may be most interested in the final section, in which I discuss my attempts to 3D print a telescope (designed with surfcad, of course) and the problems Im running into. RepRap: Blog.

RepRap: Blog: UK RepRap Master Class

RepRap Blog

For a fee of £575, participants will be provided with all of the hardware and software, along with expert guidance, over the course of the weekend, to build and commission their RepRap 3D printer. RepRap: Blog.

RepRap: Blog: Why is 3D printing such a powerful way to make solid.

RepRap Blog

You are absolutely right - rate of volume deposition is another dimension that needs to be controlled, as of course, are time and one or two temperatures. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer.

RepRap 113

SOLIDWORKS in Rwanda – Part Three: Genocide History

The Solidworks Blog

They were looked upon as elite, and the colonizers helped to propagate the myth that the Tutsi were the superior ethnicity, which of course created ill-will and division. Part One. Part Two. Just about everyone knows that Rwanda suffered a horrible genocide in 1994.

A Musical Week in the 3D Printing World

3D Printer

Being a huge Fab Lab fan, I’ve always loved the concept behind Adafruit , an online learning space for making fun things using electronics.  Founded in 2005 by MIT engineer, Limor “Ladyada” Fried, the New York City based company this week released a new DIY MIDI drum box. For

RepRap: Blog: Balitmore RepRap Master Class

RepRap Blog

For a fee of $850, participants will be provided with all of the hardware and software, along with expert guidance, over the course of the weekend, to build and commission their RepRap 3D printer. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, May 22, 2011. Balitmore RepRap Master Class. If you’re thinking of getting into 3D printing and don’t know where to start, then we have just the ticket for you.

RepRap: Blog: Vapor Treating ABS RP parts

RepRap Blog

ideal of course is 2 one way valves of some form. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 26, 2013. Vapor Treating ABS RP parts.

RepRap 114

RepRap: Blog: Impartial reivew of the Clonedel Cast parts by Metrix.

RepRap Blog

And of course, while those look like they're plenty strong (with the flexibility, they might even be better than ABS), the cast parts only really need to last long enough to get the machine printing well enough to make its own spares. RepRap: Blog.

RepRap: Blog: New Extruder Design

RepRap Blog

Machined parts can take higher temperatures, of course. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Friday, April 22, 2011. New Extruder Design.

RepRap: Blog: Around the RepRap Community 11/28/2011

RepRap Blog

Of course this is the open source board upload by Jos to the RepRap Wiki. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, November 28, 2011. Around the RepRap Community 11/28/2011. Credit Photo Tomcee. Hall-O effect Endstops.

RepRap: Blog: 0.01 Layer Height on a Prusa Mendel

RepRap Blog

After the failure of the Yoda I needed to find a model that looked nice in fine printing, and had no bridging, of course my mind went straight from Yoda to the naked female form. RepRap: Blog.

RepRap: Blog: Print any colour you like.

RepRap Blog

Of course, molten polymer has a very high viscosity, so the Reynolds number of the flow in the nozzle is very low (and hence highly reversible). RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 21, 2012.

XJet to Display Unrivaled Metal and Ceramic 3D Printing Expertise at RAPID + TCT 2017 Event

Additive Manufacturing

Over the course of the event, XJet will share information about its metal and ceramic 3D printing expertise, as well as display sample 3D printed parts, at Booth #2236. was founded in 2005 by Hanan Gothait, an innovator and veteran of the inkjet printing industry.

RepRap: Blog: Say goodby to thermistor table misery.

RepRap Blog

This code has to do some FP calculations of course (including logs and exponentials). RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Saturday, June 02, 2012. Say goodby to thermistor table misery. Tired of trying to remember which thermistor table to activate in your firmware? Heres some code that calculates temperatures analytically in exactly the way that Nopheads really useful createTemperatureLookup.py

RepRap: Blog: Around the RepRap Community 03/12/12

RepRap Blog

His software is of course free like speech, but he takes donations :). RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, March 12, 2012. Around the RepRap Community 03/12/12. Marlin 1.0.

RepRap: Blog: 3D/DC

RepRap Blog

Unfortunately, despite almost year of reliable service, my extruder (a Wades Extruder of course, something Im fairly proud of) chose that moment to jam up. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer.

RepRap: Blog: Automatic documentation and project evolution

RepRap Blog

Of course it can’t be fully automatic, but you will have at least hyperlocal assembly instructions, which would be structured and more easily recognized. You'll have dev access of course. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, March 16, 2011. Automatic documentation and project evolution. While designing my Mendel, I found out that I really hate to write documentation.

Life As a Professional 3D Designer: Meet 3D Arist Pekka Salokannel

i.materialise

It was probably around 2005 when I first saw a 3D printed product online, I believe it was one of Janne Kyttänen’s designs. Of course we know that almost never happens. Pekka Salokannel lives the 3D printed dream.

RepRap: Blog: Conducting Plastic Experiments

RepRap Blog

filament, for which we dont care whether the particles touch or not, of course. My name is Amy and I'm a Materials Science Student from Univ of Pennsylvania and working with a group of 4 other students on a project where we're trying to print conductive materials from a Makerbot So far, we've had limited success testing conductive inks, paints, solders and we really could use your help in continuing with our best course of action. RepRap: Blog.

RepRap: Blog: Around the Community 03/25/12

RepRap Blog

Of course getting people to properly calibrate before using their magic machine is like pulling teeth! RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, March 25, 2012. Around the Community 03/25/12. Printrboard is now available ($130, $145 shipped to the US ). Printrbot has created their own all on board branch of the Teensylu.

New Considerations When Upgrading to EPDM 2015

Fisher/Unitech

Additionally, SQL Server 2005 and 2008 are no longer supported , but EPDM media kits will be shipping with SQL Server 2014 this year. Enterprise PDM 2015 has brought with it some important changes that will affect your upgrade.

Designer Spotlight: Robert Krawczyk

Shapeways Blog

During my 31 years at IIT, I have developed and taught a series of computer-aided design and digital design courses covering 2D and 3D CAD, image composition, animation, and form generation methods.

Welcome to SOLIDWORKS World Japan 2016

The Solidworks Blog

His time spent in preparing for the CSWP exam before and ultimately passing the course refined his SOLIDWORKS skills and boosted his productivity in the workplace. The journey began in earnest in 2005 and demonstrates a passion for problem solving and playing the long game through to the end.

Japan 100

SOLIDWORKS Women in Engineering Series: Lauren Lee

The Solidworks Blog

I’ve also always enjoyed art and design, since my parents are both artists, so I took a hand-drafting course in the KU art department. I started in college so since 2005.

Transforming Orthotics with 3D Printing and Industry 4.0

Stratasys Blog for a 3D World

Of course, no one person can properly execute all of the required knowledge to operate the current workflow needed to achieve this cyber-physical system. From 2005 to 2009, the annual VA spending on O&P related items has increased almost 80%, from $907M to $1.6B.

10 Top RC Brands and Best-Selling Products

3D Printing Hub

ARRMA SENTON 4×4 MEGA Short Course SC Truck. The Arrma SENTON 4×4 MEGA is a fast, mud-blasting dirt-stirring short course (SC) truck. Traxxas 68086-4 Slash 4X4 Short Course Truck. Redcat Racing has been around since 2005.

Transforming Orthotics with 3D Printing and Industry 4.0

Stratasys Blog for a 3D World

Of course, no one person can properly execute all of the required knowledge to operate the current workflow needed to achieve this cyber-physical system. From 2005 to 2009, the annual VA spending on O&P related items has increased almost 80%, from $907M to $1.6B.

Concept Laser Has Helped Shape “Additive Manufacturing” for 15 Years

Additive Manufacturing

In 2005, the company began developing parallel and surface cooling. Frank Herzog: Technological development, the improved quality of components and, of course, the differences to classic methods when it comes to economic and technological options.