New Products at EuroMold

Wohlers Talk

EuroMold 2006 was heldlast weekin Frankfurt, Germany. The large trade fair consisted of nearly1,700 exhibitors from 45 countries spread across six exhibit halls. More than 60,000 people from 72 countries attended. Several new products were introduced. EOS unveiled its 150,000 FORMIGA P 100 laser sintering system, as well as its new EOSINT P 730 and EOSINT P 390 systems. Envisiontec introduced its Perfactory Desktop system for 30,000.

Travel Tips

Wohlers Talk

This is the time of year when many are traveling. So, I want to pass along a few air travel tips that may help improve your travel experience.. Pack light. Whether Im going on a two-day or two-week trip, I take two bags: a carry-on for my computer, papers, etc., and a roll-aboard. I almost always carry both onto the plane. In more than 25 years of travel, the airlines have never lost or misplaced one of my bags because I dont give them the chance..

The Terminology Challenge

Wohlers Talk

Rapid prototyping has served well as an umbrella term for a long time. In recent years, the application of additive technology has expanded beyond prototyping. Many companies are using it for visualizationnot as prototypesand for custom products and series production. It becomes awkward, even misleading, to say that youre using rapid prototyping (RP) for the direct manufacture of products. Whats more, it is confusing to those who are new to the technology and industry.

3D Printing Matures at CES

3D Printing Review

3D Printing Articles News Article 3d printer 3d printing technology 3d printing market 3d prints 3d pritned 3d prirnting 3d pritners 3D printing CES 2006 3D printing CESI’ve popped vitamins, ate right, and got plenty of sleep over the last week.

RepRap: Blog: Refighting the String Wars

RepRap Blog

In which your narrator applies the cabling approach to raising and lowering the print table of his redesigned Darwin pioneered by eD at Bath University in the ARNIE Reprap printer in 2006. RepRap: Blog.

CATI Tech Notes: Stratasys 3D Printing Helps Thermos Be an.

CATI Tech Notes

 That's why since 2006 Thermos' state of the art research facility in Japan has been home to two Stratasys 3D Printing Technologies. CATI Tech Notes. Archives. Subscribe. CATI Search. Subscribe to CATI TechLink Newsletter. Recent Comments.

Facing Bankruptcy, TechShop (Sadly) Closes All 14 Locations

Fabbaloo

When they hit the scene back in 2006, the TechShop business model had. Makers at TechShop. Read the whole entry. » » corporate

RepRap: Blog: RepRap Morgan by Quentin Harley wins the Gada.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Thursday, July 04, 2013. RepRap Morgan by Quentin Harley wins the Gada Prize!

RepRap: Blog: Your 3D print in the London Science Museum

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, July 08, 2013. Your 3D print in the London Science Museum. The Science Museum in London is producing an exhibition on 3D printing.

RepRap: Blog: Colour Mixing

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Friday, July 06, 2012. Colour Mixing. Myles Corbetts report on his colour mixing nozzle is now available on the RepRap Wiki here. posted by Adrian Bowyer @ 1:17 PM.

ACH Calgary launches medical 3D printing project, invites contributions

3D Printing Industry

ACH was opened in September 2006 and became the first free-standing pediatric facility […]. It has been reported that the Alberta Children’s Hospital (ACH) in Calgary has initiated a new project called kidSIM 3D Printing Challenge. The hospital has invited the public to share various ideas for using 3D printing to benefit their patients’ healthcare experience.

RepRap: Blog: 3D Printing Where It Needs To Be

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, May 13, 2013. 3D Printing Where It Needs To Be. Here is a remarkable achievement Follow this link for details. To quote Vik Olliver: "3D Printing Where It Needs To Be.".

First look at Poland’s SondaSys new SLS 3D printer

3D Printing Industry

It is made by a company of the same name, and produced/developed by various strands of Solveere, a specialist rapid prototyping business first launched in 2006. SondaSys is an industrial selective laser sintering (SLS) 3D printer set to launch at formnext in Frankfurt 14th to 17th November 2017. Based in Poland, SondaSys joins the ranks […]. 3D Printers Exceltec Formnext Industrial SLS polymer polymers selective laser sintering SLS Solveere SondaSys

RepRap: Blog: Join us at 2014 Midwest RepRap Festival (MRRF.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Friday, February 14, 2014. Join us at 2014 Midwest RepRap Festival (MRRF), Goshen, Indiana, USA. Im really looking forward to this!! link].

RepRap: Blog: Solving a nagging question about print adhension

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Saturday, December 17, 2011. Solving a nagging question about print adhension.

RepRap: Blog: BotQueue v0.3 - Now with Webcams, Pausing, and.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, April 24, 2013. BotQueue v0.3 - Now with Webcams, Pausing, and More! Coming quickly on the heels of the last release, the latest v0.3

RepRap: Blog: Stepping into firmware

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, May 29, 2011. Stepping into firmware. In which your narrator begins to build the PIC32 firmware for the Darwin/Rapman-derivative Sampo 3D printer.

RepRap: Blog: Open Source is a Philosophy, Not a Checkbox

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, October 29, 2012. Open Source is a Philosophy, Not a Checkbox. TL;DR : open source is a philosophy, not a checkbox. Find more collaborators, not customers.

RepRap: Blog: Heated Piezo for Jetting Wax (and other stuff)

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, September 18, 2013. Heated Piezo for Jetting Wax (and other stuff).

RepRap: Blog: Unreasonable Rocket's 3d Printed Rocket Engine.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, June 05, 2011. Unreasonable Rockets 3d Printed Rocket Engine Takes Flight! My two passions are Rocketry and 3d Printing.

RepRap 108

RepRap: Blog: Sampo: The return of Darwin.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, April 27, 2011. Sampo: The return of Darwin. In which your narrator decides to go retro and have another look at Darwin. Do you want to read more?

EDEM and Barnes Group Advisors Partner to Simplify 3D Printing Through Simulation

3DPrint.com

EDEM is a specialist and market leader in Discrete Element Method (DEM) software, going back to its founding in 2006. The company’s software is used for virtual testing of equipment that. View the entire article via our website. 3D Printing 3D Software Business 3d printing partnerships 3d printing simulation software 3d simulation Barnes Group Advisors discrete element method EDEM industry partnerships simulation

RepRap: Blog: RS Components distributing RepRaps

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, December 02, 2013. RS Components distributing RepRaps.

RepRap: Blog: A "string wars" approach to the y-axis

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, June 15, 2011. A "string wars" approach to the y-axis.

RepRap: Blog: Inside 3D Printing Event

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 05, 2013. Inside 3D Printing Event. Come to the Inside 3D Printing event in New York City ! The event runs from April 22-23 2013.

RepRap: Blog: Solid prints

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, May 10, 2011. Solid prints. In which your narrator attempt to print a large, complicated part in solid ABS without support or warping. Do you want to read more?

RepRap: Blog: Development board arrived

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Friday, March 11, 2011. Development board arrived. In which your narrators quest for a next generation printer continues. Do you want to read more? >.

Growth of Metal AM Systems

Wohlers Talk

The chart shows continued growth through 2006, followed by a multi-year slump. Note: The following was excerpted from Part 4: Industry Growth in Wohlers Report 2014.

System 239

YouTuber James Bruton Makes Record Books with World's Tallest 3D Printed Sculpture

3DPrint.com

James Bruton began his YouTube channel in 2006 to share videos he made regarding robotics and other hands-on projects. After making a commitment to himself to upload a new video once a week, he has. View the entire article via our website. 3D Design 3D Printing 3dfilaprint guinness world record human sculpture James Bruton lulzbot plymouth university Portsmouth University Creative and Cultural Industries science & stuff sculpture tallest human sculpture world record youtube

3D Print This Case For Your Raspberry Pi 2

3DPrint.com

It was originally conceived back in 2006 as a tiny – and very affordable – computer for kids. When Eben Upton, Rob Mullins, Jack Lang and Alan Mycroft took on the task of building... View the entire article via our website. 3D Design 3D Printing 3d print raspberry pi 3d printed cases adafruit raspberry pi raspberry pi 2 raspberry pi 3d printing thingiverse

RepRap: Blog: London RepRap User Group

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, April 10, 2012. London RepRap User Group. There will be an inaugural meeting of the London RepRap User Group at 7 p.m. on Monday 16 April at the London Hackspace. Details: [link]. posted by Adrian Bowyer @ 4:01 PM. Comments: Post a Comment. << << Home. Contributors. prusajr. Erik de Bruijn. Christopher Olah. Ian Adkins. Simon McAuliffe. Wizard23.

SOLIDWORKS 2016 – A Power User’s Perspective Part I

Jeff's Tool Shed

I’ve been writing this blog since 2006 […]. Introduction I suppose you could call me a power user, anyway. I’ve been using SolidWorks for 18 years, I’m a CSWE and I use it day in and day out.

RepRap: Blog: Open call for AMRI 2014 Summer Fellowships

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sunday, April 27, 2014. Open call for AMRI 2014 Summer Fellowships. We are thrilled to announce an open call for Summer 2014 Fellowships at Advanced Manufacturing Research Institute (AMRI), hosted at Rice University in the department of Bioengineering. This year there is an open call for applications for the following projects: Project 1: e-NABLE 3D Printed Prosthetic Devices.

RepRap: Blog: Hear Adrian Bowyer on BBC Radio

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Saturday, October 01, 2011. Hear Adrian Bowyer on BBC Radio. Adrian is interviewed by Shaun Ley about RepRap on Sunday 2 October on the BBC Radio 4 news programme The World This Weekend. The interview will be transmitted sometime between 13:00 and 13:30 UK time. You can listen on air or on line. The programme link is here: The World This Weekend.

RepRap: Blog: Mendel's Birthday

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, July 20, 2011. Mendels Birthday. This is Gregor Mendels 185th birthday: [link]. posted by Vik Olliver @ 11:24 AM. Comments: :-).

RepRap: Blog: RepRap Interviews: Sound / Slic3r

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, September 05, 2012. RepRap Interviews: Sound / Slic3r.

Folding transformation chair 3d printed in Polyamide

DIY 3D Printing

The stool was designed by Patrick Jouin in 2006 and acquired into the Cooper Hewitt Museum''s collection in 2008. From video description: This folding stool, called "One__Shot.MGX", was manufactured using a 3D printing process known as selective laser sintering.