SolidWorks 2011 – A Training Manual

Jeff's Tool Shed

This one is called “Beginning to Advanced SolidWorks 2011 Modeling, Assemblies and Drafting from Machined Parts to Blobjects” Quite the mouthful. The post SolidWorks 2011 – A Training Manual appeared first on Jeff's Tool Shed. Book Review SolidWorks SolidWorks 2011 Training A couple of months ago I got the opportunity to review a new SolidWorks training manual.

SolidWorks World 2011 Wrapup

Jeff's Tool Shed

The post SolidWorks World 2011 Wrapup appeared first on Jeff's Tool Shed. SolidWorks Community Kevin Bacon San Antonio SolidWorks SolidWorks World 2011 SWW Where to begin? Let’s rewind to last night and the “special event” at The Cowboy Dance Hall. I use quotation marks because it really should be called what it is, a bash. Party is too tame of a word. The bash was simply incredible. Kerri Dunne, and her team, hit a grand slam with this […].

RepRap: Blog: Reprap at the NextGen Science Fair 2011 in San.

RepRap Blog

Tuesday, June 21, 2011. Reprap at the NextGen Science Fair 2011 in San Francisco. After many misgivings about the direction of the event {it was the Cable TV channel TasteTVs first such event}, the NextGen Science Fair 2011 came off very well. RepRap: Blog.

SolidWorks World 2011

Jeff's Tool Shed

Currently, I’m in a plane 37,000 feet above the ground on my way to SolidWorks World 2011. The post SolidWorks World 2011 appeared first on Jeff's Tool Shed. This will be my 6th time attending SWW, and I’m just as excited for this one as I was my first one in 2006. For me, it’s a reunion, a learning experience and a vacation all rolled up […]. SolidWorks Community Phoenix San Antonio SolidWorks World SWW2011

SolidWorks World 2011 Day Deux

Jeff's Tool Shed

The post SolidWorks World 2011 Day Deux appeared first on Jeff's Tool Shed. Day two started early for me. Five-fricken-thirty in the morning early, and I dont know why. Both mornings here Ive woken up at 5:30 and, admittedly, that completely sucks. Im getting off track though. After a breakfast that consisted of a triple 20 ounce mocha from Starbucks, some cold French toast and cantaloupe, I made […].

Tools 44

RepRap: Blog: Unreasonable Rocket's 3d Printed Rocket Engine.

RepRap Blog

Sunday, June 05, 2011. posted by Kraig : June 06, 2011 12:54 AM. posted by Clive : June 06, 2011 4:03 AM. posted by Forrest Higgs : June 06, 2011 2:09 PM. posted by Inanna : June 06, 2011 5:01 PM. RepRap: Blog.

RepRap 108

RepRap: Blog: Sourcing a 3d Printer

RepRap Blog

Sunday, April 10, 2011. posted by Anthong RootBeard : April 10, 2011 7:45 PM. posted by madscifi : April 10, 2011 8:14 PM. posted by Neil Underwood : April 10, 2011 8:22 PM. posted by Forrest Higgs : April 10, 2011 10:35 PM. posted by LD : April 11, 2011 5:44 PM.

RepRap 111

RepRap: Blog: Mendel's Birthday

RepRap Blog

Wednesday, July 20, 2011. posted by Forrest Higgs : July 20, 2011 2:45 PM. posted by graphmastur : July 20, 2011 3:43 PM. posted by AKA47 : July 24, 2011 10:36 PM. RepRap: Blog.

RepRap: Blog: Quality - Open Source for the Win (Part Deux)

RepRap Blog

Tuesday, November 29, 2011. posted by DGM : November 30, 2011 1:23 AM. posted by Adrian Bowyer : November 30, 2011 1:41 AM. posted by mlagana : November 30, 2011 11:27 AM. posted by Jeff Keegan : November 30, 2011 8:24 PM. RepRap: Blog.

RepRap: Blog: Say goodbye to unsightly STL triangle misery! Forever!

RepRap Blog

Wednesday, October 19, 2011. posted by Marcus Wolschon : October 19, 2011 2:26 PM. posted by Adrian Bowyer : October 19, 2011 3:20 PM. posted by RichRap : October 19, 2011 3:30 PM. posted by ITDaniher : October 19, 2011 3:48 PM. RepRap: Blog.

RepRap: Blog: A new approach to printing metals

RepRap Blog

Friday, June 24, 2011. June 26, 2011 11:18 PM. posted by stan : June 27, 2011 12:25 AM. posted by nophead : June 27, 2011 1:27 AM. posted by Forrest Higgs : June 27, 2011 2:52 AM. posted by Jeff Keegan : June 27, 2011 9:39 PM. RepRap: Blog.

RepRap: Blog: A Tipping Point of Print Quality (Open Source for the.

RepRap Blog

Friday, September 09, 2011. posted by nophead : September 09, 2011 7:04 PM. posted by prusajr : September 09, 2011 7:12 PM. September 10, 2011 2:27 AM. posted by Andrew : September 12, 2011 4:53 AM. posted by bc : September 12, 2011 10:50 PM. posted by alan h : September 20, 2011 1:50 PM. posted by prusajr : September 27, 2011 5:33 AM. posted by bkubiat : October 01, 2011 3:02 PM. posted by bkubiat : October 03, 2011 10:24 AM.

RepRap: Blog: Prusa Iteration 2

RepRap Blog

Friday, November 11, 2011. November 11, 2011 11:43 PM. posted by Brad Pitcher : November 12, 2011 1:31 AM. posted by Brad Pitcher : November 12, 2011 1:32 AM. posted by Brad Pitcher : November 12, 2011 5:17 AM. posted by Gary : November 12, 2011 3:22 PM.

RepRap: Blog: Getting Rid of Mendel's Nuts

RepRap Blog

Sunday, June 12, 2011. posted by Nudel : June 12, 2011 12:08 PM. posted by Emmanuel Gilloz - Wat : June 12, 2011 2:45 PM. posted by RichRap : June 12, 2011 5:13 PM. posted by Forrest Higgs : June 12, 2011 7:16 PM. posted by Marcus Wolschon : June 13, 2011 12:40 PM.

RepRap: Blog: Still Extruding: RepRap Price Points

RepRap Blog

Wednesday, August 24, 2011. posted by Wizarth : August 24, 2011 5:18 AM. posted by Mathias Kuse : August 24, 2011 8:33 AM. posted by Forrest Higgs : August 25, 2011 12:44 AM. posted by ambiguousphoton : September 05, 2011 6:55 PM. RepRap: Blog.

RepRap: Blog: Founder's Forum

RepRap Blog

Saturday, June 11, 2011. My daughter, Sally, and I took one of our RepRaps to The Founders Forum 2011 , where I also gave a talk. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Founders Forum.

Mendel90

HydraRaptor

I never understood why Mendel has a triangular prism frame. The way I see it, the frame only has two functions: - To hold the Y bars in a flat plane and to support the tops of the Z bars.

RepRap: Blog: Michael S. Hart, e-book inventor and Project.

RepRap Blog

Thursday, September 08, 2011. posted by Forrest Higgs : September 09, 2011 12:30 AM. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Michael S. Hart, e-book inventor and Project Gutenberg founder, dies at 64.

eMaker Reprap Master Class event in Bath (UK) 1st-3rd July 2011

RichRap

RepRap: Blog: Being in a 3D world, with a 3D printer? what do I.

RepRap Blog

Thursday, September 08, 2011. posted by GDay : September 22, 2011 11:21 AM. Check out the "David Scanner" # posted by GDay : September 22, 2011 11:22 AM. RepRap: Blog.

RepRap: Blog: UK RepRap Master Class

RepRap Blog

Wednesday, April 27, 2011. eMAKERshop have teamed up with the Bath University RepRap research team to bring you our first UK RepRap Master Class over the weekend of 1/2/3 July 2011. posted by Forrest Higgs : April 28, 2011 1:12 AM. posted by chet : April 28, 2011 5:56 AM.

RepRap: Blog: 0.01 Layer Height on a Prusa Mendel

RepRap Blog

Tuesday, December 27, 2011. posted by Jay Kominek : December 27, 2011 6:20 PM. December 27, 2011 6:51 PM. December 27, 2011 11:02 PM. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer.

Resistor Photo ID

Nothing Labs

I shipped a new iPhone app a few weeks ago - "Resistor Photo ID" It uses your iPhone''s camera to help identify resistor values.

83

RepRap: Blog: Prusa Felt branch and ThingDOC

RepRap Blog

Wednesday, June 08, 2011. posted by Forrest Higgs : June 10, 2011 4:05 PM. posted by nophead : July 04, 2011 5:13 PM. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Prusa Felt branch and ThingDOC.

SolidWorks World Day 1

Jeff's Tool Shed

SolidWorks Community Apollo 13 Bertrand Sicot Gene Kranz Jeff Ray Jim Lovell SolidWorks SolidWorks World 2011 I don’t know that I can say anything more intelligent than that. It’s been a pretty incredible day today. I woke up way too early to start with. How early?

Why is change so hard?

Thornburg Thoughts

One of my favorite paintings was created in the mid-1300’s by Laurentius de Voltolina. It It depicts a classroom at the University of Bologna. University of Bologna, c.

A Visit to Z Corporation

Jeff's Tool Shed

This past Friday, I spent the day at Z Corporation and SolidWorks. It was my first time actually visiting Z Corp, and I was excited for it. So much so, that I got my days messed up and actually went down Thursday.

Tools 83

Polyholes

HydraRaptor

When Reprap machines print holes they tend to come out undersized, even if the linear dimensions of an object are spot on.

RepRap: Blog: Reprap Prusa Iteration 2 Build Event in Cologne.

RepRap Blog

Sunday, November 27, 2011. Here is a video of an earlier workshop organized by the same team: Workshop data: Time: 3rd and 4th of December 2011, from 10.00h to 19.00h on both days. RepRap: Blog.

RepRap: Blog: Aha! RepRap appears do be doing MakerFaire!

RepRap Blog

Friday, March 11, 2011. Maker Faire UK 12-13 March 2011 is part of Newcastle Science Faire 2011 Weve got a number of different folk doing up a number of different booths for a number of different Makerfaires. posted by Luis : March 11, 2011 6:14 PM. posted by Sebastien Bailard : March 12, 2011 3:04 PM. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. RepRap appears do be doing MakerFaire!

RepRap: Blog: Solving a nagging question about print adhension

RepRap Blog

Saturday, December 17, 2011. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Solving a nagging question about print adhension.

RepRap: Blog: Stepping into firmware

RepRap Blog

Sunday, May 29, 2011. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Stepping into firmware. In which your narrator begins to build the PIC32 firmware for the Darwin/Rapman-derivative Sampo 3D printer.

RepRap: Blog: Hear Adrian Bowyer on BBC Radio

RepRap Blog

Saturday, October 01, 2011. posted by Bruulstraat 2C, 3360 Lovenjoel : October 01, 2011 7:11 PM. posted by SallyRepRapLtd : October 01, 2011 8:31 PM. posted by lob : October 02, 2011 9:45 PM. posted by lob : October 02, 2011 10:30 PM. posted by Forrest Higgs : October 03, 2011 4:04 PM. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Hear Adrian Bowyer on BBC Radio.

RepRap: Blog: Impartial reivew of the Clonedel Cast parts by Metrix.

RepRap Blog

Tuesday, March 08, 2011. posted by RichRap : March 08, 2011 9:36 PM. March 08, 2011 9:58 PM. posted by Tian Chang : March 09, 2011 2:01 AM. posted by Kevin : March 09, 2011 3:32 AM. posted by M : March 09, 2011 7:17 AM. RepRap: Blog.

RepRap: Blog: Around the RepRap Community 08/06/2011

RepRap Blog

Sunday, August 07, 2011. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Around the RepRap Community 08/06/2011. RepRap Cousins in Zero G!

RepRap: Blog: New Extruder Design

RepRap Blog

Friday, April 22, 2011. posted by BodgeIt : April 22, 2011 8:35 PM. posted by Adrian Bowyer : April 22, 2011 10:16 PM. posted by BodgeIt : April 22, 2011 10:29 PM. posted by Grogyan : April 23, 2011 9:59 PM. posted by Adrian Bowyer : April 23, 2011 11:22 PM.

RepRap: Blog: 3D Systems Print Quality Mixup

RepRap Blog

Thursday, October 06, 2011. posted by georgep : October 06, 2011 9:26 PM. posted by Dan : October 07, 2011 4:55 PM. posted by Carmi : October 08, 2011 11:50 AM. posted by KL : October 15, 2011 2:44 PM. posted by prusajr : December 08, 2011 12:11 AM.

RepRap: Blog: Sampo: The return of Darwin.

RepRap Blog

Wednesday, April 27, 2011. RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Sampo: The return of Darwin. In which your narrator decides to go retro and have another look at Darwin. Do you want to read more?

Economic recovery

Thornburg Thoughts

I’m watching something emerge here in Brazil that could bounce the US economy back to full recovery pretty fast if we were to implement it as well! Brazil’s educational system is putting hundreds of thousands of tablets in kids’ hands as part of a pilot project, prepping for nationwide roll-out on a grand scale. What makes this interesting is not the technology, not even just the government’s funding of innovative educational programs.

Computing and Kids

Thornburg Thoughts

My friend Gary Stager makes an important point: There are lots of computers in schools, but precious little computing going on. The The real power of personal computing is its ability to let people create and run their own programs. And