The Cube, Celestial Circuits and a Wild Ride

Cubify 3D Printing Fans & Fun

To test the electronics, a warehouse was set up with a simulated moon surface and I would sometimes get to "pilot" the small remote control vehicle that represented the full sized rover. There are more than one type of crazy people in the world.

Video 52

Synaptive Medical Uses Simulation to Unravel the Complexities of the Human Body

The Solidworks Blog

Founded in 2012, Synaptive Medical is a Toronto-based corporation that set out to help top neurosurgeons, radiologists, and healthcare facilities to improve their accuracy and success in the medical field. SOLIDWORKS SOLIDWORKS Professional solidworks simulation professional Synaptive Medica

Trending Sources

What is SLA and Why USE it? ProJET 6000

3D Rapid Pro

Stereolithography models can also be used as master models, when it comes time for multiple prototypes to be produced through secondary tooling. The SLA model is built, the pattern finished and then the silicone rubber is poured around the SLA model to produce a tool that will yield 30+ urethane castings. You may select from a range of urethane materials with properties that simulate the thermoplastic materials often used in production.

InSilixa Uses Advanced FEA to Study Real-World Gasket Behavior

The Solidworks Blog

In 2018, we invited some SOLIDWORKS Simulation Premium users to try our newest simulation offering: SIMULIA Structural Simulation Engineer (SSE), a powerful and realistic cloud-based structural simulation solution.

Study 97

SOLIDWORKS Skills Help Eric Spendlove Make Entertainment Spectacles Come to Life

The Solidworks Blog

in 2012 and his decision to learn as many ways to use SOLIDWORKS software as possible, his career has taken off, enabling him to leave Cirque du Soleil as an employee but continue working with the group as a consultant. The Man behind the Magic.

SOLIDWORKS World 2018 General Session Recap: Day Three

The Solidworks Blog

To mark its 20th anniversary, the CSWP exam has been redesigned with new content, new models and new challenges. He admits that when he first started designing, his initial sketches were not great, which made explaining his ideas difficult and clay modeling was too time-consuming.

They couldn’t buy it. So they created it.

Shapeways Blog

But an out-of-the-box RC model by Tamiya was only two-wheel-drive. Martin made his first foray into 3D design for printing in 2012, when he used Shapeways to turn custom maps he’d developed for flight simulators into 3D prints.

Pittsburgh’s Swanson School of Engineering – On Board with New Metallic Alloy Compositions for Additive Manufacturing (AM)

Additive Manufacturing

Since we have a limited budget and a short time period to conduct our research, we need to develop good models, perform rigorous experiments and calibrate our model-predictions accordingly, using as few iterations as possible.

Reflecting on SOLIDWORKS Worlds over the Years

The Solidworks Blog

Three of my favorite things about SWW are Model Mania, the “What’s New” skit, and the CSWE event. Model Mania. After modeling the part, they need to answer some questions about mass and then make some edits to the part and run a simulation to determine the factor of safety.

SOLIDWORKS xDesign Tackles Moving in a Sustainable World

The Solidworks Blog

I have been a SOLIDWORKS user since 2012 and got certified as a CSWE in January, 2018. SOLIDWORKS xDesign was used to model the various components of the device. While we were in Milan, I had an opportunity to talk to the contestants who participated in the SOLIDWORKS xDesign hackathon.

SOLIDWORKS World 2017 Product Showcase Preview: See Education Users in Action

The Solidworks Blog

It’s used to model almost every part of each year’s vehicle. SOLIDWORKS assembly is used to model the integration of all the subsystem parts of the vehicle. SOLIDWORKS Simulation add-on is used to simulate expected stresses in every critical part of the vehicle.

The Case for Industrialization of the Construction Industry

3D Perspectives

Modeling and Simulation. Whilst the cost of an automobile has gone from 140% in 1910 of the average national per capita income in the United States down to 33% in 2012, the cost of an average dwelling has gone up from 333% to 619% of per capita income during the same period.

Virtual Cities: Let’s Rethink the Way We Live

3D Perspectives

Singapore is a pioneer in creating a comprehensive virtual model of itself: a virtual city. During her tenure, Surabaya has won a number of awards including the ASEAN Environmentally Sustainable City Award 2012 and the Adipura Kencana, the highest environmental awards in Indonesia.

RepRap: Blog: New open source slicer: CuraEngine!

RepRap Blog

But on the back-end, the engine that generates the toolpath from the mesh-surface model (e.g. On-the-fly model preparation There is no slicing button anymore because it starts processing right-away. Model fixing The engine can fix major problem in a model. RepRap: Blog.

DSM Adds 3D-Printing Grades to Digimat to Accelerate Adoption of Polymer Additive Manufacturing

Additive Manufacturing

The combination of DSM’s high-performance AM grades with e-Xstream’s accurate printing process simulation solution will allow manufacturers and end-users to identify manufacturing issues before printing their material using DSM 3D printing thermoplastic grades.

SolidWorks World 2013 – Monday General Session

CAD Fanatic

According to Sicot, SolidWorks’ 2012 customer satisfaction rating is 94%, up one point from 2011. This software looks very intuitive to use for generating conceptual models, and has tools for easily connecting to other coworkers/users worldwide for collaboration and design.

Felix 68

Farnborough Q&A with David Ziegler

3D Perspectives

See a virtual and scaled model to learn how they developed the Thrust Reverser Unit (TRU) prototype and exceeded their expectations. Electromagnetic Simulation – It is now more important than ever for aerospace engineers to understand how an aircraft behaves during a lightning strike. Physical testing with a full-sized prototype is difficult, while scaled-down models don’t accurately capture how lightning behaves.

David 47

Prototyping large tanks for space industry with 3d printing by RedEye

DIY 3D Printing

From source post: Validation of design In early 2012, Lockheed Martin SSC began looking at ways to improve and add value to their satellite design. It would require testing many assembly configurations and producing several simulators and prototypes to validate design changes.

Sustainability Series blog post: A Decade of Evolution in Sustainability — Q&A

3D Perspectives

This has since changed, yet there is still progress to be made, as it is rare to find an enterprise that has defined an end-to-end sustainability model. Now we definitely need to accelerate and develop new business models to decouple economic growth from carbon emissions and resources use.

SOLIDWORKS Support Monthly News ??? July 2014

The Solidworks Blog

How can a SOLIDWORKS Simulation mesh be made as symmetric and uniform as possible? Is there an example illustrating how to use the SOLIDWORKS Plastics Model Manager to duplicate and copy studies / projects (without having to create additional copies of the CAD files)?

Life-Threatening Heart Condition of 5-Year-Old Mia Gonzalez…

Design 2 Part News

Miami’s Nicklaus Children’s Hospital Used 3D Printed, Life-Like Anatomical Heart Model to Study Complexity, Set Strategy for Repair. A 3D printed model of Mia’s heart enhanced the planning phase so the surgical team could optimally visualize Mia’s specific heart structure, shown in this video. With a 3D printed model, we were able to figure out which part of her arch should be divided to achieve the best physiological result. ”. –Dr. A 3D Printed Heart Model.

Miami 54

DIMENSIONEXT: 3D Printing Vascular Structures

Dimensionext

Our biomolecule-based variants provide the cells with a natural environment instead, and therefore can promote the self-organising behaviour of the printed cells to form a functional tissue model.” c)2012 DIMENSIONEXT. Pages. SECTOR NEWS. REPORTS. REVIEWS. SEARCH. PRINTEREST.

Life-Threatening Heart Condition of 5-Year-Old Mia Gonzalez Carried a Grim Prognosis – 3D Printing from Stratasys Changed Her Life

Additive Manufacturing

Miami’s Nicklaus Children’s Hospital Used 3D Printed, Life-Like Anatomical Heart Model to Study Complexity, Set Strategy for Repair. A 3D printed model of Mia’s heart enhanced the planning phase so the surgical team could optimally visualize Mia’s specific heart structure.

EOS-New Balance Uses EOS Industrial 3D-Printing Technology to Additively Manufacture

Additive Manufacturing

However, the extent to which most running shoe models vary is rather limited in comparison. These molds will run thousands of plates before being retired or replaced, often annually, by a new mold indicating a new model. No two runners are the same.

EOS 106

Nano Dimension Puts 3D Printed Electronics in the Spotlight at SOLIDWORKS World 2016

Additive Manufacturing

Nano Dimension, founded in 2012, focuses on the development of advanced 3D printed electronics systems. 3D Design Software from Dassault Systèmes’ SOLIDWORKS Helped Develop the DragonFly 2020 3D Printer for Next-Generation Electronics – in all Shapes and Sizes Imaginable.

Medical Machining Tightens Up

Design 2 Part News

The new Vertex 55X II model series, comprising six distinct models, was announced in February 2015. The ST-38 model from Star CNC is popular with the company’s medical customers, according to Bursac. Model-Based Definition. Tight Simulations.

Shoes, Perfectly Balanced

Design 2 Part News

However, the extent to which most running shoe models vary is rather limited in comparison. These molds will run thousands of plates before being retired or replaced, often annually, by a new mold indicating a new model. Contributed by EOS, Design-2-Part Magazine.

RESHORING: THE TREND FROM GLOBALIZATION TO…

Design 2 Part News

The emergence of localization and regionalization as a preferred business model is good news for the reshoring trend. Simulation. Largely due to the success of the Reshoring Initiative, Harry was inducted into the Industry Week Manufacturing Hall of Fame 2010 and was named Quality Magazine’s 2012 Quality Professional of the year. “RESHORING: THE TREND FROM GLOBALIZATION TO LOCALIZATION” By Harry Moser, president at Reshoring Initiative, Industry Today.

Assembly Automation Takes Off in Aerospace Industry

Design 2 Part News

For instance, Boeing Commercial Airplanes built 723 airliners in 2014 vs. 648 in 2013 and 601 in 2012. New skills in simulation, sensors, data, computers, integration and robotics will be required to transform our factories for the future.”. By Austin Weber, Assembly Magazine.

3D Metal Printing Improves Craniomaxillofacial Surgery

Additive Manufacturing

In addition to the patient-specific implants, anatomical models for optimum presurgical planning can also be requested on this site. In addition to the patient-specific implants, anatomical models for optimum presurgical planning can also be requested on this site.

Metal 63