CubeX Wins CES 2013 Emerging Technology Award!

3D Printer Users

It was a lot of fun watching the C/Net Best of CES 2013 Awards ceremony live feed. Best of CES 2013 Award for Emerging Tech category! And, since 3D Systems in located in a variety of locations, I have no idea where I might have to travel to be able to take a look at the CubeX and print some test objects. Award Best of Show CES 2013 CubeX CubeX 3D Printer That was especially true when I saw that the CubeX won the.

CubeX 109

2013: A New Year and a New Focus

3D Printer Users

From the start, my interest has been on seeing the realization of low cost 3D printing beyond the realm of the hobbyists looking for the "build experience". It represented the introduction of the 3D printer as a true consumer product. Beginning with this post, the focus of this blog will be directed to pre-built 3D printers aimed at prototyping and light manufacturing. I am most interested in moving the state of the art of 3D printing forward.

Trending Sources

New CubeX 3 Printjet 3D Printer

3D Printer Users

Little did I know, when I posted that I wanted to change the focus of this blog to pre-built business 3D printers that the first printer that I would talking about would be a bigger sibling of the consumer Cube 3D printer!

CubeX 153

TCTShow 2013 RepRap 3D printing - Community Hub and Show review

RichRap

One rather stunning project I talked about was nothing to do with 3D printing but is another amazing example of what makers and inventors get up to in their spare time, that was the Fusioneer project by Dr. Jonathan Howard - this is basically a self made fusion reactor!

RepRap: Blog: 2013 AMRI Fellowships Wrap-Up and Final.

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Wednesday, September 04, 2013. 2013 AMRI Fellowships Wrap-Up and Final Presentations. RepRap: Blog.

Putting a CubeX 3D printer through its paces

3D Printed Education

Coming up soon I will be running a training day together with the Iain from 3D Systems, showing the guys from TeachDesign how to set up and use the Cube and CubeX 3D printers. Uncategorized 3D Printing CubeX hardware

CubeX 140

DfE report… 3D printers in schools: uses in the curriculum

3D Printed Education

The Department for Education in England has published a report on 3D printing in schools to enrich STEM and design subjects. The document looks at the experiences of 21 schools using 3D printers for the first time in Science, Maths and D&T. A write up on the Telegraph newspaper goes on to say thet 500K will be invested to allow 60 teaching schools to buy printers and train teachers to use them effectively. Uncategorized 3D Printing article Education media news

Report 118

Excellent 3D Printer Overveiw at DE Magazine

3D Printer Users

I''ve been a longtime subscriber to Desktop Engineering and it has been my go-to magazine when it comes to keeping up with not only 3D printing; but, fabrication of all types and, in particular, the software to drive it. 3D Printing On the Cheap by Pamela J. Not only is the article an excellent overview of the low cost 3D printers coming into the market.

@Teach_Design @3DSystemscorp @Cubify and #3DPrinting

3D Printed Education

One of the Teach Design partners is 3D Systems who manufacture the Cube and CubeX 3D Printers and as you may realise I have worked closely with 3D Systems for some considerable time. Uncategorized 3D Printing Cube CubeX D&T Teaching and Learning

Cubify 165

A CubeX Review from TheVerge.com

3D Printer Users

A big printer, printing big objects, requires lots of filament. If the "14hr" is any indicaton, this is a good sized iPad Holder! :) When you have multiple choices, it''s helpful to develop a naming convention that helps you know exactly how to set up the printer. This is something that I will definitely ask about when I see the 3D Systems people later this month at Hagley Museum. Hopefully, this is something that will be completely gone in the production printers.

CubeX 109

Makerbot and Afinia at CES

3D Printer Users

It''s because I have had a hard time trying to figure out how to cover their printers without saying something VERY negative about their claims being more than a little annoying. Last year, 12 minutes and 30 seconds into a C/Net video , the claim was made that " With the Makerbot you can make another 3D printer. A few plastic components does NOT "make another 3D printer." But, even the little Cube printer, which is clearly aimed at the docile consumer market.

Work in Progress and RepRap Community Hub event - September 2013

RichRap

using some exciting new printers) Nylon 645 Printing Taulman Nylon 645 (both colour and natural printing - it''s a more clear material so very nice for light pipes!) We can share our passions and developments, 3D printing experiences and ideas with each other and visitors to the show.

Building on Making Learning Irresistible -in D&T

3D Printed Education

The second part was “hands on” with some of the newer technologies, 3D Printing, Robotics and programming, and CAD/CAM. 3D Systems for providing the Cube 3D printer, Roland DG for providing the vinyl cutters, VEX Robotics for the loan of the VEX IQ Clawbot.

Roland 145

Ceramics 3D Printing - Original Motivation

3D Printer Users

If you go back to the origins of this blog and my interest in 3D printing, it came directly out of my daughter''s career as a ceramics sculptor. This is when I stumbled on to the potential of 3D printing. Unfold, a Belgian Design Studio, has been experimenting with 3D printing ceramics.

@3DSystemscorp Partners With @Teach_Design For UK Education Initiative

3D Printed Education

Great news announced today… Check out the 3D Systems press release. November 20, 2013: Leading 3D printing manufacturer 3D Systems (NYSE:DDD) today announced an innovative partnership with Teach Design, a not-for-profit organisation set up to provide very low cost training to UK Design Technology teachers. The machines will also be made available to STEMNET ambassadors to promote 3D printing in their voluntary work with children.

CubeX 121

A Bit More Detail About the CubeX

3D Printer Users

Obviously, the 3D Touch is a part of the lineage of the CubeX. But, this blog seeks to serve those that need a 3D printer to get a job done for income. Remember, I now have two 3D printers. For me, the result is a better multiuser platform where several designers and fabricators need to use the same printer. 3 head printer 3D Touch CubeX dual print heads Multi head 3D Printer triple print heads

CubeX 126

DIMENSIONEXT: Home Metal 3D Printer: Newton 3D

Dimensionext

Home Metal 3D Printer: Newton 3D. Home Metal 3D Printer: Newton 3D. 3D Printing at home with metals is now truly an emergent trend. Now, Esteban Schunemann, PhD student at Brunel University in London has announced the Newton 3D Home Metal Printer.

DeltaMaker Passes First Hurdle

3D Printer Users

While I have nothing against lone inventors, it takes a lot of different skills to pull off designing and producing a successful product as complex as a 3D printer. It''s hard to believe it now; but, I''m absolutely certain that back in 1990, when the Kuerig was first organized, that the idea of a single cup coffee maker in homes and offices seemed as strange as the idea of a 3D printer does today.

3D printing with flexible materials – FlexPLA tests

Algorithmic Art

FlexPLA, this new experimental stuff for your FDM 3D printer is a revolutionary new rubber-like 3D printer filament which allows you to 3D print flexible objects, such as rubber machine parts, soft toys, flip-flops, and other rubbery items like silicone parts.

3D printing with various materials

Algorithmic Art

It is the first post on this new blog of mine, it will be about my newest 3D printing experiences and experiments with new materials. Technically, we could 3D print with an material which melts and can be extruded through a nozzle. Have you ever pictured yourself to 3D print with wood?

RepRap: Blog: Why is 3D printing such a powerful way to make solid.

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, June 11, 2013. Why is 3D printing such a powerful way to make solid objects? Journalists often ask me what is special about 3D printing.

RepRap 113

RepRap: Blog: Vapor Treating ABS RP parts

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 26, 2013. posted by p0t0 : February 26, 2013 6:29 PM. posted by Snowcamo : February 26, 2013 9:59 PM. February 27, 2013 12:08 PM.

RepRap 114

RepRap: Blog: RepRap Morgan by Quentin Harley wins the Gada.

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Thursday, July 04, 2013. Great to see some giant leaps in the evolution of opensource 3D printing via some genuinely ingenious ingenuity! RepRap: Blog.

3D printing buildings and entire streets – will additive manufacturing revolutionize the building industry as well?

Algorithmic Art

The advantages of using 3D printing technology in building industry would be quicker construction, lower labor costs, and less waste produced. That scale fits for the most 3D printed projects in almost every scene, such as jewelry, shoes, furniture, and 3D printed art work.

3D Print at Personalize TCT Show Birmingham

Algorithmic Art

The UK’s definitive and leading additive m anufacturing, 3D printing, rapid prototyping and product development technology has been an awesome experience for visitors of every level of interest from hackerspace to aerospace.

MCOR 86

Rostock Delta 3D printer build

RichRap

Hello and welcome to the Rostock build, it''s take a while to get this one documented, I blame that on having way too much fun with my printers and development at the moment, I''ll try to be a little quicker on future projects. The Rostock 3D printer was originally develope d by Johann C.

Why the uPrint is one of the world’s top-selling 3D printers

3D Printing for Business 101

uPrint 3D Printer. . There’s a reason that the uPrint is one of Stratasys’ top-selling 3D printers… It’s affordable and it’s a workhorse. It’s the 3D printer that UPS Stores chose to put into its stores to print parts for the public.

Ohio 65

RepRap: Blog: Announcing AMRI: Advanced Manufacturing.

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Thursday, August 08, 2013. For Laser-sintering the focus is on 3D printed carbohydrate glass for vascularized living engineered tissues. RepRap: Blog.

RepRap: Blog: Your 3D print in the London Science Museum

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, July 08, 2013. Your 3D print in the London Science Museum. The Science Museum in London is producing an exhibition on 3D printing. RepRap: Blog.

chopmeister's 3d printing stuff: We've got movement!

Chopmeister's 3D Printing Stuff

chopmeisters 3d printing stuff. A blog about my 3d printer related projects. Thursday, November 14, 2013. ▼ 2013. (8). WhateverBots and the 3d printing vaporware. And possibly other stuff. Pages. Links. About / Contact. Weve got movement!

chopmeister's 3d printing stuff: More bearing blocks.

Chopmeister's 3D Printing Stuff

chopmeisters 3d printing stuff. A blog about my 3d printer related projects. Saturday, December 21, 2013. Since my biggest 3d printing related projects are the NanoBlock (non-bowden) and H4 (bowden) extruders, I constantly seem to need to change the printhead.

2b3d Budapest 3D Printing Days

Algorithmic Art

Did you know, that there was 3D print show in Hungary in June? My 3D printing passion is getting greater, and the best thing is that many people are getting interested in my 3D printed designs as well! © @andreashepherd on Instagram. Hi there!

Chris Crowly - 3D Printing Changed My Workflow

3D Printer Users

Editor''s Note: I met Chris Crowley because he and his Cube 3D printer had a rocky first meeting. Obviously, those initial problems were resolved and, as you can see, Chris is clearly a 3D printer fan! And, he is using his 3D printer in precisely the kinds of applications that are the focus of this blog. All of my clients are extremely impressed by the fact that they get free access to a 3D printer when they hire me for mechanical engineering.

chopmeister's 3d printing stuff: Ultimaker to HBot? Enter Haddon.

Chopmeister's 3D Printing Stuff

chopmeisters 3d printing stuff. A blog about my 3d printer related projects. Monday, November 11, 2013. Labels: 3d printer , add-on , H-bot , hbot , Ultimaker , upgrade. ▼ 2013. (8). WhateverBots and the 3d printing vaporware.

Road to a fanless printhead - DIY radial blower cooling

Chopmeister's 3D Printing Stuff

chopmeisters 3d printing stuff. A blog about my 3d printer related projects. Monday, November 25, 2013. ▼ 2013. (8). WhateverBots and the 3d printing vaporware. And possibly other stuff. Pages. Links. About / Contact.

DC 130

chopmeister's 3d printing stuff: TwisterBlocks installed (with.

Chopmeister's 3D Printing Stuff

chopmeisters 3d printing stuff. A blog about my 3d printer related projects. Monday, December 23, 2013. With the TwisterBlocks my printer seems to be much quieter, and the sound of it moving is really smooth. ▼ 2013. (8).

Haddon out - new bearing blocks and belt tensioners in

Chopmeister's 3D Printing Stuff

chopmeisters 3d printing stuff. A blog about my 3d printer related projects. Tuesday, December 17, 2013. ▼ 2013. (8). And possibly other stuff. Pages. Links. About / Contact. Haddon out - new bearing blocks and belt tensioners in.

RepRap: Blog: Inside 3D Printing Event

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Tuesday, February 05, 2013. Inside 3D Printing Event. Come to the Inside 3D Printing event in New York City ! The event runs from April 22-23 2013.

RepRap: Blog: New open source slicer: CuraEngine!

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Friday, August 02, 2013. Besides a divine figure, its a 3D printing solution that is meant to be useful and usable to both beginning and advanced 3D printer users.

DIMENSIONEXT: The Third Way: A 'Snap Together' 3D Printer

Dimensionext

The Third Way: A Snap Together 3D Printer. The Third Way: A Snap Together 3D Printer. Putting a self-assembly 3D printer together is possibly not something most people will be doing outside of education: its not easy. Monday, December 16, 2013. Pages.

RepRap: Blog: RS Components distributing RepRaps

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, December 02, 2013. posted by Emmanuel Gilloz : December 04, 2013 9:29 AM. posted by Serge Vi : December 08, 2013 1:07 PM. RepRap: Blog.

RepRap: Blog: ShopBot Desktop as a 3D Printer for Sugar Glass

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Thursday, July 25, 2013. ShopBot Desktop as a 3D Printer for Sugar Glass. posted by JDM929 : July 25, 2013 6:00 PM. RepRap: Blog.

Glass 62

RepRap: Blog: 3D Printing Where It Needs To Be

RepRap Blog

Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Monday, May 13, 2013. 3D Printing Where It Needs To Be. To quote Vik Olliver: "3D Printing Where It Needs To Be.". May 18, 2013 11:50 PM. RepRap: Blog.