Bioprinting presentation at MRRF 2014

DIY 3D Printing

Jordan Miller, Andy Ta, and Steve Kelly talk 3D bioprinting at the 2014 Midwest RepRap Festival. 2014 AMRI biohacking bioprinter cell diy science mrrf Take a look at other stories about bioprinting: [link] Source: Hackaday https://www.youtube.com/watch?v=6UTAre6tvgE. v=6UTAre6tvgE.

3D Systems video from EuroMold 2014

DIY 3D Printing

3d Systems shows their product line on EuroMold 2014. 3d systems euromold 2014 europe It is presented by the CEO Ari Reichental. Nice job Ari!

Video 173

Trending Sources

AIRTEC 2014

Wohlers Talk

AIRTEC 2014 took place October 28–30. Note: The following was authored by Tim Caffrey, senior consultant at Wohlers Associates. DEMAT produces the highly-regarded EuroMold exhibition in Frankfurt, Germany year after year. The company also organizes AIRTEC, the international aerospace supply fair. Like EuroMold, AIRTEC is held in Frankfurt’s sprawling Messe Exhibition Centre. This year’s AIRTEC was the ninth, and the largest and most successful ever.

3D Printshow London 2014 video compilation

DIY 3D Printing

Here are some videos from it: [link] There were some big machines there: 2014 3d printshow europe london UK video I wish I was able to go there. maybe one day. I''ll look for sponsors next year.

Video 173

EduTECH 2014

3D Printing Systems

Edutech 2014 had lots of conversation around education with some of Australia’s best teachers calling for the end to exams. Education is changing faster than ever. As technology marches forward, Australian educators are keeping ahead of the game.

How to learn SolidWorks 2014

cadcamstuff.com

Infinite Skills: Learning SolidWorks 2014. Quick look… It is obvious that the content of Learning SolidWorks 2014 will give you a solid start modeling using SolidWorks. So to recap with Infinite Skills, Learning SolidWorks 2014 you get: * A Ph.D

How To 198

Gartner's 2014 Hype Cycle and 3d printing technologies (just moving down the curve)

DIY 3D Printing

Gartner''s 2014 Hype Cycle is out? 2014 Future gartner So where is 3d printing? It is moving slowly down the curve. All technologies are advancing in small steps.

3D Printing Showcase 2014

3D Printing Systems

3D Printing Showcase 2014 will see crowds gathering, eager to learn about the many capabilities of 3D Printing. Day one will focus on Research & Education (How can 3D Printing integrate with your research/curriculum? What are the latest innovations?).

3Dprintshow 2014 rocks London once again.

Philip Cotton

Like my first ever blog about the 2013 3dprintshow I could go on for ever describing the event, however I will let the photos do the talking…… 3dprinting 2014 3dprintshow 3dprintshow global awards awards billingsgate global London old philip cotton

National Manufacturing Week Sydney 2014

3D Printing Systems

National Manufacturing Week in Sydney, Australia was a busy one. It It was great to see everyone who visited our stand over the 4 day event. If you missed seeing us in Sydney, check out our events page here to find out when we will be in your neck of the woods. On display we had [.].

Top 3 CES 2014 3d printing technologies by Too Smart Guys

DIY 3D Printing

3d printed food ces 2014 food geeks video Just a nice video overview of CES2014 3d printing by some geeks. Source: https://www.youtube.com/user/pox98?feature=watch. feature=watch. and a bonus video, 3d printed pizza!!!

2014 - projects, plans, updates.

Chopmeister's 3D Printing Stuff

All in all, 2014 looks promising. Hi all. January is almost behind us, so I thought it was past time I write something new here. I'll go through some of the stuff I'm working on and some I plan to work on this year.

3d Systems on CES 2014: they came, they presented and they won

DIY 3D Printing

I was never fan of 3D Systems corporate style of marketing, but they DOMINATED the CES 2014 with technology! Both are expected to ship in the second quarter of 2014. It is expected to ship in the second half of 2014. It is expected to ship in the second quarter of 2014.

System 177

EuroMold 2014 in Review

Additively Blog

The team of Additively.com has spent the last week in Frankfurt, Germany to attend and display at EuroMold 2014. EuroMold is one of the biggest exhibition focusing on bringing a product from design to manufacturing

Bre Pettis talks about new MakerBot 3d printers at CES 2014

DIY 3D Printing

link] [link] [link] Longer interview by Engadget: Bre Pettis ces 2014 make makerbot replicator video MakerBot''s CEO Bre Pettis chats with MAKE Digital Fabrication Editor Anna Kaziunas France about the Replicator Mini, Replicator, and the Replicator Z18 3D printers.

3Doodler 3d drawing pen updates from CES 2014 are swappable nozzles and DoodleStand

DIY 3D Printing

Here is the DoodleStand in action: 3doodler ces 2014 pen upgrade video They have several swappable nozzles for it now and a stand for it that serves as sort of mouse with buttons that gives you extra control and precision. link] Update (11.8.2014.):

Video 154

Deezmaker Bukito and Leopoly integration presented on CES 2014 by Hak5

DIY 3D Printing

bukito ces 2014 deezmaker software video The maker of the Bukobot shows off their new portable 3D printer - the Bukito. link] Deezmaker has integrated with Leopoly, a site that brings 3D models available to everyone. link]. Here are some previous post about Bukito: [link] [link].

Makers 154

Quant 3D Adds Q1000 Industrial 3D Printer to Their Lineup, Unveiled at EuroMold 2014

3DPrint.com

As EuroMold 2014 is in full swing in Frankfurt, Germany this week, we are getting the first look at a wide array of innovations being rolled out. 3D Printers 3D Printing euromold 2014 ok international q1000 Quant 3D quant3d

Prodways to Unveil 9 New 3D Printers, Full Range of Materials at EuroMold 2014

3DPrint.com

EuroMold 2014 begins tomorrow, and the exciting announcements keep piling up! 3D Printers 3D Printing dlp euromold euromold 2014 Groupe Gorge MOVINGLight PLASTCure Prodways ProMaker

Stratasys to Display 3D Printed StreetScooter C16 Electric Car at EuroMold 2014

3DPrint.com

It’s not only 3D printed — it’s electric — and you can check it out later this month at EuroMold 2014. 3D Design 3D Printing 3d printed car 3d printed electric car Aachen University euromold 2014 germany Objet1000 stratasys StreetScooter Here comes your new car!

Chris Crowley's CES 2014 Report

Cubify 3D Printing Fans & Fun

3D Systems CES 2014 ChefJet Cube3 CubePro Sense Scanner Editor''s Note: Chris is a 1st Gen Cube owner and excellent CubifyFans contributor. When I heard that he had traveled to CES, I knew that we HAD to have an eye-witness report from him.

3D Systems Announces Several New 3D Printers and Materials for Unveiling at EuroMold 2014

3DPrint.com

3D Printers 3D Printing Business 3d systems 3ds euromold euromold 2014 germany hp new 3d printers ProX 400 Direct Metal Printer ProX 500 plus ProX 800 3D printer stratasys

System 112

Euromold 2014 — A Review of Day 1

3D Printing Industry

… The original post Euromold 2014 — A Review of Day 1 appeared first on 3D Printing Industry. By Rachel Park. When it comes to the first day of Euromold, manic doesn’t quite cover it.

Ready, Set, GO! Slot Car Racing at Euromold 2014

Materialise

Over the course of 2014, Materialise organized a series of slot car races where participants could let their imagination run wild and 3D print their slot cars which they made with a whole range of Additive Manufacturing technologies. 3D Printing Slot Car Championship 2014

Infor PLM Vision 2014+

Tech Clarity

What does Infor have planned for PLM? Infor has a multi-pronged PLM strategy based on industry. They have strong PLM capabilities for the formulated industries and recently beefed up their offering for the discrete manufacturing world.

DyRoS, the 3D Printed Humanoid Robot, Presented at ‘Humanoids 2014?

3DPrint.com

3D Design 3D Printing 3d printed robot 3d printed robots Advanced Institutes of Convergence Technology Dynamic Robotic Sysstems Lab DyRoS Humanoids 2014 south korea The Digital Human Research Center He’s upright. He’s functional. He even dances. This is the 3D printed, humanoid robot design, also known as DyRoS. And he is the culmination of an ongoing project by The Digital Human Research Center, funded by... View the entire article via our website.

Best Products of 2014

Wohlers Talk

HP Officejet Pro 8600 – We purchased this all-in-one printer/copier/scanner in June 2014 for $128. (I Lenovo Thinkpad X1 Carbon Touch laptop – I purchased it in May 2014 for $1,720.

3DPI Editorial Round-Up: October 2014

3D Printing Industry

… The original post 3DPI Editorial Round-Up: October 2014 appeared first on 3D Printing Industry. By Rachel Park. It has long fascinated me how the language of the 3D printing industry evolves along side the technology and the companies operating within it.

Rachel Park’s Top 5 3D Printing Applications for 2014

3D Printing Industry

2014 has certainly been a wild ride — the 3D printing industry is maturing. I’m not including any of the nonsense stories in my 2014 top picks, but there is one self-indulgent story.… By Rachel Park.

The 2014 Geekie Awards

3D Systems

The 2014 Geekie Awards Thursday, August 21, 2014 - 14:52 . HOLLYWOOD, CA -- This past weekend, 3D Systems joined in at the Geekie Awards®, the second annual award show by geeks for geeks™.

Ping Pong Championship 2014

Materialise

Ping Pong Championship 2014. The team’s poured their heart and soul into this last game to be the champions for 2014. Since January, Materialise employees have been competing, pouring out their sweat and blood to win the coveted “Ping Pong Champion” title.

National Manufacturing Day 2014

Purple Platypus

Blog #mfgday14 additive manufacturing mfgday national manufacturing day 2014 subtractive manufacturing Modern manufacturing environments are commonly thought of as dark, dangerous factories designed for low-skilled workers.

Top 3D Printing Highlights from 2014

Stratasys

The post Top 3D Printing Highlights from 2014 appeared first on Solid Concepts Blog. Evolution 2014 highlights 3d printing additive manufacturing drones quadcopters solid concepts stratasys together top stories 2014 We’ve had quite the exciting year.

Shane Taylor’s Top 5 3D Printing Applications for 2014

3D Printing Industry

2014 has been a very busy year in both desktop prosumer 3D printing and industrial additive manufacturing. … The original post Shane Taylor’s Top 5 3D Printing Applications for 2014 appeared first on 3D Printing Industry. By Shane Taylor.

Stratasys Presents a 3D Printed Aircraft Interior at EuroMold 2014

Stratasys Blog for a 3D World

The presentation was filmed at Stratasys’ aerospace-themed booth at EuroMold 2014 in Frankfurt. Join Fred Fisher, Director of PolyJet and FDM Applications at Stratasys, as he presents a real aircraft interior 3D printed using a unique combination additive manufacturing technologies.

SolidWorks Vision 2014+

Tech Clarity

SolidWorks is a 3D CAD product offered by Dassault Systmes, targeted especially forsmall and medium sized businesses. The 3D design tool and supporting suite has the ability to create, simulate, publish, and manage engineering and product related data.

Robox Printer Makes Yahoo Best Tech Gifts 2014

3D Printing Industry

Christmas Gift Guide 2014: Best Tech Gifts also lists the CEL Robox 3D Printer. … The original post Robox Printer Makes Yahoo Best Tech Gifts 2014 appeared first on 3D Printing Industry. By Shane Taylor.

Econolyst launches 2014 Big 3D printing survey

Capturing the Value

Our friends at Econolyst have just launched their 2014 Big 3D printing survey. This is the second annual survey that they’ve run. Last year they had over 3,000 responses and were able to get some great insights from that data. So if you’re a current user of 3D printers or 3D printing services then they’d like you to help make this year’s survey even better. Big 3D Printing Survey. 3d printing Econolyst survey 3D printing

Survey 100

Scott Grunewald’s Top 5 3D Printing Applications for 2014

3D Printing Industry

But in 2014 it finally started to build up some steam. … The original post Scott Grunewald’s Top 5 3D Printing Applications for 2014 appeared first on 3D Printing Industry. By Scott J Grunewald. 5: China warming up to 3D printing.

China 113

Danielle Matich’s Top 5 3D Printing Applications for 2014

3D Printing Industry

This really puts a damper on things for me, seeing as how, occasionally, I like to pretend that I’min touch with what’s happening in the real world.Which brings me to my list of the top five3D printing applications of 2014!… By Danielle Matich.

chopmeister's 3d printing stuff: 2014 - projects, plans, updates.

Chopmeister's 3D Printing Stuff

Monday, February 3, 2014. 2014 - projects, plans, updates. All in all, 2014 looks promising. ▼ 2014. (6). 2014 - projects, plans, updates. chopmeisters 3d printing stuff. A blog about my 3d printer related projects. And possibly other stuff. Pages. Links.

Deloitte’s 2014 Fast 500 Rankings: 3D Systems Makes the List as Highest Ranking 3D Printing Company

3DPrint.com

3D Printing Business 2014 technology fast 500 3d systems 3ds Deloitte''s 2014 Fast 500 It’s not enough to be lauded as the inventors of 3D printing. 3D Systems just keeps receiving one accolade after another as well, as they continue to forge ahead with seeking new challenges, making... View the entire article via our website.

World Maker Faire 2014

3D Systems

World Maker Faire 2014 Wednesday, September 17, 2014 - 17:31. 2014’s “World Maker Faire” will be held on September 20 th and 21 st at the New York Hall of Science in Queens. If you’re in the NYC area this weekend, come discover 3D Systems and be amazed by the innovation of 2014.