How to learn SolidWorks 2014

cadcamstuff.com

You are dealing with “best” practices and modeling techniques, hundreds of functions that all could be a productivity gainer in the right application. Infinite Skills: Learning SolidWorks 2014. As seen above the course is broken down into very manageable steps.

How To 198

Ready, Set, GO! Slot Car Racing at Euromold 2014

Materialise

Over the course of 2014, Materialise organized a series of slot car races where participants could let their imagination run wild and 3D print their slot cars which they made with a whole range of Additive Manufacturing technologies. 3D Printing Slot Car Championship 2014

Trending Sources

World Maker Faire 2014

3D Systems

World Maker Faire 2014 Wednesday, September 17, 2014 - 17:31. 2014’s “World Maker Faire” will be held on September 20 th and 21 st at the New York Hall of Science in Queens. If you’re in the NYC area this weekend, come discover 3D Systems and be amazed by the innovation of 2014.

Top 10 Applications for 3D Printing in 2014

3D Systems

Top 10 Applications for 3D Printing in 2014 Tuesday, December 30, 2014 - 10:49 At this point, it’s fairly safe to assume you’ve heard of 3D printing. Because of course it was! Our Top 10 applications for 3D printing in 2014 are: 10.

Food 98

Highlights from San Diego Comic Con 2014

3D Systems

Highlights from San Diego Comic Con 2014 Thursday, July 31, 2014 - 11:43 Swarms of costumed enthusiasts descended on the 2014 San Diego Comic Con last week, and 3D Systems and our entertainment division, Gentle Giant Studios, were proudly among them.

UMBC Students 3D Scan Campus for Micro 3D Printed Map

3D Printer

Students at the University of Maryland, Baltimore County have used an octocopter to 3D Scan the school’s campus which was then rendered a digital model by Potomac Photonics via 3D Printing. So Scientific experiments can now be devised using the information gained in the model.

Ball State University Students Recreate 3D Model of Demolished Landmark with 3D Printing Technology

3DPrint.com

Whether it is a high school biology class, a computer graphics course, or a university architecture project,... View the entire article via our website.

Online Dating Goes 3D: Match.com tries out 3D printed, life-sized models of two eligible bachelors

3DPrint.com

” “They,” of course, would be Match.com in this case, the website that touts itself as being “#1 in dates, relationships,... View the entire article via our website. “It’s okay to look,” they tell you.

The Top 10 Stratasys Blog Posts from 2014: Cars, Monsters and Manufacturing

Stratasys Blog for a 3D World

As we wrap up 2014, it''s time to take a look back at some of the amazing 3D printing stories and videos we''ve had the privilege to feature here on the Stratasys 3D Printing Blog. An artistic rendering of the final car model, in blue. And the top post for 2014… drum roll please….

Dutch Company Tinello Lets You 3D Print Your Future Kitchen — or at Least a Model of it

3DPrint.com

Over the course of the last year and a half we have been trying to envision what our dream home... View the entire article via our website. 3D Design 3D Printing 3d print home model 3d print kitchen 3d systems 3d systems benelux kitchen kitchen model Netherlands tinello Tinello Kitchen & Interior I’m in the process of constructing a custom home with my soon-to-be wife Heidi.

Generative 3d modeling for 3d printing workshop by parametric | art at Budapest 3D Printing Days

Algorithmic Art

Participants will get a bigger view about the methodology of parametric design and algorithmic modeling and its usage in architecture, design, landscape, jewelry, fashion and urban scale. It is intended for professionals and students with a minimum experience in 3D modeling.

Art 90

Dear Scale Model Enthusiasts, Happy Train Day!

i.materialise

It’s exhausting! The answer is of course, Dr. Sheldon Cooper from the Big Bang Theory! And how better to celebrate it than with some 3D Printed retrospective train models! Usually I built my models as scratchbuilding from others but now I construct everything for myself.

3dprinting story run by the3dprintingassociation.com published 8th and 9th December over two days

Philip Cotton

However, there are many free courses available where teachers can learn about the basics of 3DCAD and then pass this onto students and with Autodesk making their software free to all teachers and students this will greatly help with this issue.

K–12 Students Design Miniature Golf Courses for a Creative STEAM Challenge

Shapeways Blog

3D modeling can seem daunting to the uninitiated, but it’s not as inaccessible as you may think. I’ve taught CAD modeling for 3D printing to students of all ages, mainly through a nonprofit after-school STEAM program in New York City, Dimension Learning.

SOLIDWORKS and the Tucker Torpedo Part 2

The Solidworks Blog

I’ll use those measurements to finish the engine 3D model. I already conducted some pre-work modeling the 3.6L So the need for a 3D model of the engine and transmission is going to be essential so we can work on concepts on how the engine, transmissions, exhaust, electronics, etc.

NY MakerCon Shows Next Industrial Revolution is Here

3D Printer

And of course, that doesn’t count the other available platforms. He estimates that their MicroFactory model, pulling from crowdsourcing concepts, is 5x faster than a traditional factory and needs 100x less capital. Local Motors is so successful in this new manufacturing model, GE approached them to collaborate on FirstBuild, a new approach for making big appliances for the home. I love Maker Faires!

DIY 3D Printing: How to heat form 3d printed PLA parts to perfectly fit.

DIY 3D Printing

Aug 4, 2014. The PLA will gradually stiffen over the course of a minute or so after it has been removed from its heat source, so you will have a reasonable window in which to form the gauntlet. ▼ 2014. New Disney technology will make your 3d models hav.

How To 200

Sifting through the features or "The Guide to Not Buying a 3D Printer"

Chopmeister's 3D Printing Stuff

Well, a person looking to buy a 3d printer nowadays will have a larger choice than ever of manufacturers and models. A model of nice behavior there. Do note that of course, vice-versa is also true - quality parts do not make a good printer by themselves. The problem.

GRRF 285

Students Break Architectural Design Barriers Using 3D Printing Robots at Bartlett School of Architecture’s RC4

3DPrint.com

In London, Bartlett School of Architecture’s RC4 offers masters-level courses, and is composed of a research cluster which is taking on the challenges of architectural design in 3D printing through the use of 3D... View the entire article via our website.

printrbot GO – i take back all the nasty things I said about Oldham couplers

ei8htohms

” Of course this makes sense. Here’s a short video I took of them in action when printing a spiral vase sliced model. Nice, straight walls (the right side of this model tells the tale). Oldham couplers, if you’re reading this, it wasn’t your fault.

BuildTak Review – The Ideal 3D Printing Surface?

3D Printing for Beginners

This does of course go somewhat against the concept of BuildTak since it is supposed to help you get rid of all makeshift adhesion aids. Upon removal of the model, it left its footprint engraved into the BuildTak sheet rendering that area completely useless.

Review of the Pirx 3D Printer – A Great Value for Money Option

3D Printing for Beginners

We had never heard of these guys before and upon closer inspection we learned that Pirx is a Polish start-up who have brought their 1st 3D printer on the market only in January 2014. Here is how the Pirx performed on these models: Dimensional Accuracy.

STEM Tutorial: Junior Solar Car

The Solidworks Blog

Partners Technology Student Association (TSA) and Army Education Outreach Program (AEOP) bring the JSS model solar car competition to many schools. Workshops for Warriors  Train, Certify and Place Vets into Advanced Manufacturing Careers - August 12, 2014.

How to Make Scary glow-in-the-dark Ghost Fridge Magnets for Halloween

3D Printing for Beginners

Of course, more experienced users are welcome to try it out too. The model of 3D printer is not relevant – you may use any model that you may have access to. But you may want to check out others, so feel free to use our listing of 3D model repositories.

How To 218

ASTERID 1100 3d printer by Plastic Scribbler

DIY 3D Printing

From company page: The Asterid 1100 takes our base model and adds a Smart controller LCD graphics display with SD card reader, it replaces the power resistor in the hot end with a heater cartridge and it adds a PCB heated bed.

3D Printing Invites You to Join the Avengers

3D Printing Review

SUPER AWESOME ME 3D printed iron man action figure with Hasbro Disney and Walmart to coincide with Disney’s Marvel Super Hero September, fans will get a chance to participate in in-store 3D scanning, in which their faces will be rendered as strikingly realistic 3D models to be placed on Captain America or Iron Man figurines to be 3D printed at 12? The print can either be picked up at the store or shipped to them in the course of four weeks. Hasbro, Inc.

3D printers shipments to double each year until 2018’s $13.4bn market

3D Printing Review

The hype around 3D printing is being borne out by rising shipments, which are forecast to almost double from last year’s 56,000 units to to 108,151 in 2014. percent of sales in 2014, but are expected to grow to 28 percent by of the sub-$2,500 market by 2018.

You Can Clean Up with 3D Views in SOLIDWORKS 2015

The Solidworks Blog

Otherwise, a fully annotated 3D model could look like a messy fur ball. I will use this a lot when highlighting and capturing parts of the model for design changes from review meetings.”. That being said, of course, 3D Views are visual.

The World’s Smallest 3D Printer Costs Less Than $300

3D Printing Review

Instead of the plastic microfilament that most consumer-level 3D printers melt and extrude to slowly build up a model, the iBox Nano uses a small pool of liquid resin that’s hardened, layer by layer, using ultra-violet LEDs.

Repair Your 3D Models with trinckle

Fabbaloo

It seems there are even more ways to repair broken 3D models. German-based trickle is a 3D print service that can accept your 3D models and print them. But a common scenario they encounter is bad 3D models submitted by their clients.

United Nudes joins the 3D printing fashion revolution with new line of Float shoes

Top 4 3D Printing

The Cube3 is, of course, one of 3D Systems flagship consumer models and the company is very much on board with United Nudes latest product. Another week, another big name clothing brand declaring its love for all things 3D printing.

Stratasys Introduces New 3D Printing Curriculum for Educators

3D Printing Review

The full-semester, 14-week course is aimed at helping prepare secondary and post-secondary students worldwide for careers being transformed by 3D printing. Learning materials are free to educators and include a curriculum guide, supporting presentations, 3D models (STL files) and grading tools. While Stratasys recommends FDM and PolyJet s 3D printing technologies for this course, any technology platform and any CAD software with STL support may be used.

HP’s bold plan to become the first mainstream 3D printing company

3D Printing Review

You can either let someone else disrupt you, or you can disrupt your own business model. Of course, critics will contend that HP is doomed to become the next Kodak, a once-great company that never recovered when its core market — analog photography — got disrupted.

3D printing: the shape of things to come?

Capturing the Value

If you ask the proverbial man or women in the street what they understand by the terms stereolithography, selective laser sintering and fused deposition modeling, youre likely to be met with a blank expression. Two of the leading 3D printing companies, 3D Systems and Stratasys, were founded in that decade based on innovative stereolithography (SLA) and fused deposition modelling (FDM) technologies.

Finish Off Your Guardians of the Galaxy Star Lord Costume by 3D Printing his Element Guns

3D Printing Industry

If you have a 3D printer of course! I was certain that they were made from existing 3D models or official files but after a quick email it turns out that was not the case.… By Scott J Grunewald. Why should you dress up as Star Lord this year for Halloween?

Anglia Ruskin University — Government Funding for New 3D Printing Course

Additive Manufacturing

May 31, 2016 — Anglia Ruskin University ’s new MSc in Additive Manufacturing has received funding from HEFCE (the Higher Education Funding Council for England) under a pilot scheme to promote engineering and computer science conversion courses. 12 of our research areas across our five faculties were classed as world-leading by the Research Excellence Framework (REF) 2014. Anglia Ruskin’s masters degree is also open to non-engineers under pilot scheme.

Spotlight on Dr. David Gerber: Building a Storied Career Around Easing Design Complexity

3D Perspectives

“Paradigms in Computing: Making, Machines, and Models for Design Agency in Architecture” by David Jason Gerber and Mariana Ibanez. Of course, there is room for more innovation in this new approach toward integrating project expertise. 3DEXPERIENCE Forum 2014.

David 105