Rapid.Tech 2016 im Videozwischenrückblick

Additively Blog

Erleben Sie die Rapid.Tech 2016 in Erfurt mit dem Videozwischenrückblick von Harry Flint/GBN Systems

System 141

Rapid.Tech 2016 in Erfurt

Additively Blog

Von heute Dienstag bis und mit Donnerstag findet in Erfurt die Rapid.Tech 2016 statt. Die Fachmesse zum Thema Rapid Prototyping, 3D-Druck und additive Fertigung wird begleitet von einem Fachkongress und der FabCon 3D

SME’s RAPID 2016

Wohlers Talk

I attended this week’s RAPID 2016 in Orlando, Florida. As always, the conference and exposition were excellent. An estimated 5,190 attended the event, compared to 4,512 last year. Exhibit space increased to 4,153 sq meters (44,700 sq ft), up from 2,903 sq meters (31,250 sq ft) last year.

Congratulations to the winner at EMEX 2016!

3D Printing Systems

First of all, thank you all for attending EMEX 2016, held at the ASB Showgrounds, Auckland, New Zealand. Thank you for dropping by our stand and for chatting with us; we hope you have enjoyed the event and that it was a rewarding one.

SOLIDWORKS World 2016 Update

DASI Solutions

I’m Darin @ DASI, Your SOLIDWORKS Guy, and I’m here fresh off of SOLIDWORKS World 2016 in Dallas, Texas. Written by Darin J. Grosser, CSWE Hi There.

IMTS 2016: 3D Printing in Photos


While the conference is in fact still going on, I spent only Monday and Tuesday at Chicago’s McCormick Place, attending this year’s International Manufacturing Technology Show (IMTS). View the entire article via our website.

Our Community in 2016

Shapeways Blog

While the world got a little crazy in 2016, the Shapeways community grew and thrived. Here’s a look back on some of the ways you, our community, made 2016 our best year yet. We had an incredible time in 2016, and we’re looking forward to seeing you all in 2017!

It’s Finally Here: The Shapeways 2016 Holiday Gift Guide!

Shapeways Blog

It’s the most exciting time of the year for us to share all of our independent designers’ amazing work from around the globe — in the 2016 Holiday Gift Guide ! 3D Printed Gifts Holiday 2016 Video 3d printed gifts 3d printed holiday gifts holiday 2016 shapeways gift guide shapeways gifts

Robot Building Competition 2016 – Hosted by SMEE

3D Printing Systems

After the success of the 2015 competition, the Robot Building Competition run by SMEE (Society of Monash Electrical Engineers), MECC (Mechatronics Engineering Clayton Club), Robogals and MAMEC (Monash Aerospace and Mechanical Engineering Club) is back for another year in 2016. We are proud to announce as one of the sponsors of the 2016 Robot Building Competition, it is our pleasure to be involved in the competition which.

Push Rewind: The Best Webinars of 2016

The Solidworks Blog

Without further ado, let’s see what topped the list of the most popular SOLIDWORKS 22-Minute webinars in 2016. The post Push Rewind: The Best Webinars of 2016 appeared first on The SOLIDWORKS Blog.

Dassault Systèmes Vision 2016+

Tech Clarity

The post Dassault Systèmes Vision 2016+ appeared first on Tech-Clarity. Dassault Systèmes is successfully transforming their business beyond PLM to become a platform provider. To be more precise, they are becoming a “business innovation platform company.”

Welcome to SOLIDWORKS World Japan 2016

The Solidworks Blog

Twitter Facebook The post Welcome to SOLIDWORKS World Japan 2016 appeared first on The SOLIDWORKS Blog. SOLIDWORKS SOLIDWORKS World Japan 2016For generations Japan has been renowned as a global leader in technology.

Japan 88

Inside 3D Printing—Dec 2016

Studio Fathom

The post Inside 3D Printing—Dec 2016 appeared first on FATHOM // 3D Printer Sales, Advanced Prototype Fabrication, Bridge-To-Production Low Volume Manufacturing.

What’s New in 3D Printing Lately – July 2016

3D Printing for Beginners

We pride ourselves on this blog not being a 3D printing news type of blog. We feel that a lot of news sites fuel the hype and over-inflated expectations around 3D printing while often blurring the lines between consumer and industrial 3D printing. […].

Around the World in 3D Printing: 2016 in Review


Throughout the last 12 months, we’ve been following growth in every aspect of the 3D printing industry, from hardware introductions to software developments to new materials set to bring new. View the entire article via our website.

August 2016: 3D printing prosthetics, Zika & DARPA

3D Printing Industry

August 2016 was a good month for 3D printed medical applications. There was a trend for bespoke prosthetics, both in businesses and at home and, 3D Printing 2016 3d printed prosthetics arm August 2016 calramon mabalot Chris Lin DARPA hand Inside 3D Printing Malaria MatterHackers mick maher Phantom Limb Project RLCAM Sophie de Oliveira Barata tiFAB UCI University of California Irvine Zika

3D Inspiration at Dutch Design Week 2016

Shapeways Blog

Community Design Education Dutch Design Week Dutch Design Week 2016 inspirationWe’ve just closed out the 15th annual Dutch Design Week in Eindhoven, The Netherlands!

formnext 2016: Day One in Photos


I’m here in beautiful Frankfurt, already half-dead on my feet following the first of the nearly full-week formnext 2016. 3D Printers 3D Printing 3d systems 3devo 3devo advanced filament extruder 3YOURMIND Alon Ziv Bigrep bigrep 3d printer bigrep one BigRep Studio BigRep Tech formnext formnext 2016 ge GE Additive ge additive manufacturing Kühling&Kühling materialise Nano Dimension Phillipp Stelzer polymaker René Gurka Stefaan Motte Tim Wesselink Xjet

RSNA 2016: Materialise to Offer Presentations on 3D Printing, Workshops on Mimics Software


3D Printing Medical 3D Printing 2016 Mimics Innovation Awards 3d printed anatomical models 3d printed medical models AnatomyPrint materialise medical 3d printing Mimics inPrint software RSNA 2016 The Radiological Society of North AmericaEach year The Radiological Society of North America hosts a global forum, drawing tens of thousands to their event in Chicago. Along with radiologists from 136 countries, medical physicists and a. View the entire article via our website.

What’s New in 3D Printing Lately – August 2016

3D Printing for Beginners

As the month is drawing to a close, it is time to look at the best 3D printing content published in August. As usual there is quite some stuff to sift through, here is what caught my eye. […].

Hacking Arts Conference 2016

Shapeways Blog

A video posted by Andrew Thomas (@andrew.s.thomas) on Nov 19, 2016 at 8:40am PST. Last week, Shapeways sponsored the Hacking Arts Conference at MIT in Cambridge, Massachusetts.

Art 72

TCT Show 2016: Day Two in Photos


3D Design 3D Printers 3D Printing 3D Printing Materials tct show TCT Show Birmingham TCT Show Birmingham 2016Birmingham has been bustling the past few days with a unique energy of the sort found only at a gathering of the minds. This week’s TCT Show has been filled with excitement and some truly. View the entire article via our website.

Autodesk PLM Vision 2016+

Tech Clarity

The post Autodesk PLM Vision 2016+ appeared first on Tech-Clarity. Autodesk continues to grow their capabilities and presence in the PLM market.

3D Printing: The Stories We Missed This Week — October 22, 2016


Featured Stories 2016 Jingdezhen Ceramic Fair 3d guns australia 3d printed ceramics 3d printed guns 3d printed porcelain 3D printing waste Airbus APWorks altair australia gun laws australia laws 3d printed guns Australian Criminal Intelligence Commission Bill Nye cellink distribution partnership Eunomia Research & Consulting Ltd formlabs formnext 2016 HBM nCode HyperWorks Novabeans organovo ruag space Sam Taylor solidThinking stock market tct tct show voxeljet

CES 2016 3D printer wrap-up: New models, new tech, new markets

3D Printing Review

3D Printing Articles News Article 3d printed 3d printer 3d printer industry 3d printing 3D printing CES 2016 3D printing future 3D printing industry 3d prints MakerBot 3D printer Robo 3D printer XYZ 3D printer

MCOR 130

Introducing the SOLIDWORKS World 2016 Keynote Speakers

The Solidworks Blog

The keynote lineup for SOLIDWORKS World 2016 includes a list of visionaries ready to provide you with new perspectives that will inspire your approach to design. Check out the #SWW16 keynote speakers and register today for SOLIDWORKS World 2016 in Dallas, Texas, January 31 – February 3, 2016.

6 Fashion Trends to Design for in 2016

Shapeways Blog

3D Printed 3D Printing Materials Curation Fashion Gifts Inspiration Jewelry Trends 2016 trends 3D design 3d modeling 3D printed 3D printing fashion trends septum ring Shapeways trends twisted earring

2016 3D Printer Buying Guide


So you want to buy a 3D printer, but you don’t know where to start. I don’t blame you, there are a lot of 3D printers out there from a lot of manufacturers with names that you’ve never heard of, it. View the entire article via our website.


Axis CAD Solutions

SOLIDWORKS World 2016 is less than two weeks away and I find myself scrambling to be ready. To be more specific, SOLIDWORKS World 2016 will be held January 31 – February 3 in Dallas, Texas. The post SOLIDWORKS World 2016 appeared first on Axis Cad Solutions.

US Election 2016: The Washington Post to 3D Print Results Live


Whatever your feelings toward the 2016 US presidential campaigning has been, there’s finally something we can agree about: it ends tonight. Election Day 2016 has been fraught with tension built. View the entire article via our website.

TCT Show 2016: Day One In Photos


3D Printers 3D Printing 3D Printing Materials 3D Platform concept laser Envisiontec eos James Bruton lulzbot makerbot polaroid tct show TCT Show Birmingham TCT Show Birmingham 2016 XRobots Xrobots.co.ukI’m here in Birmingham, UK this week for the bustling, announcement-heavy TCT Show. While the show may not be in the biggest hall here at Birmingham’s NEC (“the UK’s most. View the entire article via our website.

Boost Your Productivity with DraftSight 2016

The Solidworks Blog

What’s new in DraftSight 2016? DraftSight 2016 features faster performance, advanced customization and annotation capabilities to increase your productivity. Do more with DraftSight Professional 2016. Get more with DraftSight Enterprise 2016. DraftSight DraftSight 2016

SolidWorks Vision 2016+

Tech Clarity

SolidWorks World 2016 was held in Dallas, TX earlier this year. This post outlines 5 takeaways about SolidWorks’s strategy for 2016 and beyond. The post SolidWorks Vision 2016+ appeared first on Tech-Clarity.

formnext 2016: Day Two in Photos


3D Printers 3D Printing 3D Software Business formnext formnext 2016 hp MJF roboze roboze one+ 400 Siemens stratasys Voxel VisionToday at formnext was an early start for a group of interested and enthusiastic journalists, as we gathered together for a press conference put on by Stratasys to detail their recently announced. View the entire article via our website.

The state of 3D printing 2015 vs 2016


Welcome to our prediction of the “State of 3D Printing 2016” survey results. The post The state of 3D printing 2015 vs 2016 appeared first on Sculpteo Blog. & More 2015 2016 3D Printing 3D printing 2016 of Report State survey

SOLIDWORKS PDM 2016 Set Revision

Javelin Tech Tips

These workflows aren’t necessary anymore with the new Set Revision function in SOLIDWORKS PDM 2016. The post SOLIDWORKS PDM 2016 Set Revision appeared first on SOLIDWORKS Tech Tips, Videos & Tutorials from Javelin. Do you have a special workflow for migrated data?

June 2016: Brexit, AMShow Amsterdam, 3D printed glass-metals

3D Printing Industry

While America awaited their official nominees for the presidential election, June 2016 saw Britain vote to exit the European Union dividing the nation and sending. 3D Printers bodyTop 2016 3D printed glass-metals airbus AM Show amorphous metals AMShow Amsterdam Brexit EU European Union Exmet Heraeus Innovate UK June 2016 Renishaw

Glass 84