Offshore Wind Energy Market is Projected to Grow at 21% from 2018 to 2023

BIS Research

million by 2023 at a CAGR of 15.5% from 2018 to 2023. The global offshore wind energy market in terms of installed capacity registered 18,221MW in 2017 and is expected to reach 55,835MW by 2023 growing at a CAGR 0f 21.0% from 2018 to 2023.

GM to Produce 20 New Electric Cars by 2023

Design 2 Part News

General Motors raised the stakes in the auto industry’s ongoing competition to build more affordable, long-range electric cars this week, announcing it would roll out two more all-new EVs in the next 18 months, and 20 more by 2023. By Charles Murray, DesignNews.

MakerGirl 3D Printing and Technology Organization On Track to Impact 10,000 Young Girls By 2023

3DPrint.com

While there are plenty of initiatives around the world aimed at getting girls and young women interested in and comfortable using STEAM technology like 3D printing, coding, and robotics, I think my. View the entire article via our website. 3D Printing Education 3D printing initiative CEO girls in 3D printing girls in technology MakerGirl non-profit Northwestern University STEM education university of illinois University of Illinois Urbana Champaign women and 3D printing

NASA test fires largest 3D printed part to date for future trip to Mars

3D Printing Industry

NASA’s Space Launch System (SLS) project, scheduled for launch between 2022 and 2023, is on track to be the most 3D printing inclusive rocket to date. With the help of Aerojet Rocketdyne, a company that has applied 3D printing to the fabrication of 16 shuttle engines, the agency has been reducing the weight of components in […].

Inductive Charging Technology Dominates the Global Wireless Charging Market

BIS Research

billion by 2023, registering a CAGR of 40.97%, during the forecast period from 2018 to 2023. billion by 2023, registering a CAGR of 37.34% during the forecast period. Resonant technology and RF technology are expected to grow somewhere in the year 2023.

Emerging Economies Offer Immense Opportunities for the IoT in Oil & Gas Market to Grow

BIS Research

According to a recent market intelligence report published by BIS Research, titled ‘ Global IoT in Oil and Gas Market – Analysis and Focus (2018 – 2023) ’, the market is estimated at $13.35 billion by 2023. The market is expected to grow at a CAGR of 24.17%, during the forecast period from 2018 to 2023. The sub-segment that dominated the market in 2018 is the sensing sub-segment and it is expected to contribute the maximum revenue in 2023 as well.

Healthcare Robotics Market – Exploring the Untapped Opportunities for Key Players in the Market

BIS Research

According to a recent market intelligence report, titled ‘ Global Healthcare Robotics Market – Analysis and Forecast (2018 – 2023) ’, in 2017 the market was estimated at $5.40 billion by 2023. Incidences of adverse effects of medical treatment are on the rise globally.

Next Generation Refrigerants – A Step Toward Zero Ozone Depletion and Carbon Footprint Reduction!

BIS Research

kilotons by 2023, in terms of value and volume. The market is expected to grow at a CAGR of 8.11% and 10.52% in terms of value and volume respectively, during the forecast period from 2018 to 2023.

Creating a happy and safe smile with 3DEXPERIENCE

3D Perspectives

Osstem Implant , a Korean dental medical device manufacturer, has set a goal to become the world’s number one implant provider by 2023.

3D Printing Technology Transforming the Automotive and Aerospace Industry

BIS Research

billion by 2023. With the first attempt at developing a rapid prototyping technique in 1980, 3D printing technology has come a long way. 3D printing is a tool for designing and creating innovative and unique prototypes of objects in a shorter span of time.

Artificial Organs for Transplantation – A Ray of Hope for the Patients with Damaged Organs!

BIS Research

As per a new market intelligence report published by BIS Research, titled Global Artificial Organs Market – Analysis and Forecast (2018 – 2023), the artificial organs market was valued at $1.6

Machine to Machine (M2M) & Internet of Things (IoT) Technology Offers End-to-End Solutions Across Applications

BIS Research

billion by 2023, witnessing a CAGR of 32.58% from 2018 to 2023. Machine to Machine or commonly known as M2M and Internet of Things (IoT) are two associated technologies which emerged with the increased use of advanced technologies to establish a secure connection with remote devices and reduce manual intervention. M2M and IoT technology further enable the acquisition of information from a number of scattered satellites and other technologies connected to these remote devices.

Blockchain Technology Transforming the Agriculture and Food Supply Chain

BIS Research

Initially, in the next five years until 2023, the blockchain for agriculture is expected to be dominated by pilot projects from various start-ups and global blockchain technology companies. Post 2023, blockchain in agriculture and food is expected to witness a robust growth.

Food 52

Introducing the Industrialization of Additive Manufacturing

Design 2 Part News

Industrial giant Siemens, for example, has published a research forecast , which predicts metal additive manufacturing will become 50 percent cheaper and 400 percent faster over the five-year period ending in 2023. By Phil Schultz, executive vice president of Operations at 3D Systems.

The center of the tech revolution in finance couldn’t be further from Silicon Valley

3D Perspectives

By 2023, 17%, or $1.2 By: Ian Kar. Silicon Valley is on a mission to disrupt finance. Even Jamie Dimon is worried about it. US venture capital funding for fintech startups reached $7.4 billion in 2015 , up from $4.3 billion in 2014. But while the money’s flowing, the real action is in China.

China 52

Reshoring: Why America Needs to Rethink Its Imports

Design 2 Part News

Walmart is the driving force via its commitment to increase purchases of Made in USA products by $50 billion per year by January 2023. By Harry Moser, Founder and President, Reshoring Initiative, Media Planet.

Manufacturing Jobs ‘Roaring Back’?

Design 2 Part News

At last year’s growth rate, it would take until nearly 2023 just to recover the jobs lost during the recession. By Eugene Kiely, FactCheck.org. Vice President Mike Pence touted the latest jobs report as proof that “manufacturing is roaring back.”

Reshoring Initiative and Wal-Mart launch effort to help…

Design 2 Part News

purchases by $50 billion annually by January 2023. “Reshoring Initiative and Wal-Mart launch effort to help suppliers reshore” By Clare Goldsberry, Plastics Today. The Reshoring Initiative has announced a program in partnership with Wal-Mart to help companies manufacture more consumer products in the United States. This is in response to Wal-Mart’s commitment to increase its U.S.

The long, rough ride ahead for ‘Made in America’

Design 2 Part News

companies in a drive to increase spending on American-made goods by $250 billion by 2023 in response to consumer demand for American-made goods. By Nick Carey, Reuters. Mini motorcycle and go-kart maker Monster Moto made a big bet on U.S. manufacturing by moving assembly to this Louisiana town in 2016 from China. But it will be a long ride before it can stamp its products “Made in USA.” ” The loss of nearly one out four U.S.

Manufacturers bringing the most jobs back to America

Design 2 Part News

Walmart, the world’s largest company, announced in early 2013 a “Made in USA” program in which it pledged to purchase $250 billion of American-made products for its stores by 2023. By Michael B. Sauter and Samuel Stebbins, USA Today.

Disruptive Technologies Are Changing Automakers’ Needs…

Design 2 Part News

Ford said in November that it expects to invest $4 billion in autonomous vehicle development through 2023. “Disruptive Technologies Are Changing Automakers’ Needs, Creating Opportunities for Suppliers” Autonomous, electric, and connected vehicles require new designs, new suppliers.

Personalized Care Drives Innovation in Medical Product…

Design 2 Part News

billion in 2023. “Personalized Care Drives Innovation in Medical Product Design and Manufacturing” By Mark Shortt, Design-2-Part Magazine.

Concept Laser Has Helped Shape “Additive Manufacturing” for 15 Years

Additive Manufacturing

Just looking at build rates, Roland Berger predicts that these will increase by 800% between 2013 and 2023. Or take the price per volume of a component: a volume price of 3.14/cm³ euros today should be reduced by almost a third, to 1.10/cm³ by 2023, again according to Roland Berger.