Time for a Re-Revolution as Precious Metal 3D Printing Set to Grow to $4.1 Billion by 2024

3D Printing Industry

Considering that the market for 3D printed parts made with precious metal powders has just recently come into existence, the new report recently compiled by SmarTech’s Scott Dunham draws quite a glittery picture. Billion by 2024 appeared first on 3D Printing Industry.

David 114

Research Report Predicts Market for 3D Printed Precious Metals Components Will Reach $4.1 Billion by 2024


SmarTech Markets Publishing provides market research and industry analysis in the 3D printing and additive manufacturing sectors, and a recent report from the company says they expect the market for 3D printed precious metals... View the entire article via our website.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

NASA grants millions to 3D printing projects helping 2024 Moon landing

3D Printing Industry

American space agency NASA has just secured funding for approximately 18 early-stage 3D printing projects developing technologies to help on its next mission to the Moon. As part of the agency’s 2019 Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) seed programs, the projects are among 363 proposals that have collectively received over $43 million […].

ExOne 87

Tuskegee set to help develop NASA’s Artemis lunar lander using 3D printing

3D Printing Industry

To achieve this by 2024, the U.S. NASA’s ambitious Artemis program will see two astronauts returning to the surface of the moon for the first time since Apollo 17 touched down in December of 1972.

3D Hubs 3D Printing Trends Report forecasts 24% growth in 3D printing industry over 5 years

3D Printing Industry

Over the next five years, analysts expect the 3D printing market to grow on average at 24%, reaching $35 billion by 2024, according to 3D Hubs’ 2020 3D Printing Trends Report. billion was raised by 3D printing start-ups […].

3D printed molds are helping NASA to insulate its newest deep space rocket

3D Printing Industry

NASA engineers are using 3D printing to help insulate vulnerable parts of its new deep space rocket that will take astronauts to the moon in 2024. Aerospace 3d printed rocket component 3D printing aerospace Auburn University Boeing deep space Nasa NASA 3D printing NCAME Orion Space Launch System Thermal Protection System

NTU selects Optomec LENS 3D printing for bi-metallic NASA project

3D Printing Industry

Optomec, the New Mexico-based developers of Directed Energy Deposition (DED) and Aerosol Jet Printing (AJP) metal 3D printers, has revealed that its Laser Engineered Net Shaping (LENS) 3D printing technology will help NASA reach the moon in 2024.

3D Innovations LLC on Hawaii News Now — Sept. 24th

3D Innovations

President of 3D Innovations LLC, Collin Kobayashi, will sit down with Hawaii News Now to talk about the rapid growth of the 3D printing industry and how this industry is influencing major industries here in Hawaii and worldwide. What is 3D Printing? The Benefits of 3D Printing.

Technology Development—Looking Back, Looking Ahead

3D Innovations

3D printing, AI, VR and robotics made leaps and bounds within the last year and have experienced unprecedented growth within the last decade. Industrial 3D Printing Market Expected to Hit $16 Billion by 2020 [Report] (Thomas Net). billion in 2024.

3D printed electronics for the Internet of Things

Leslie's Blog

The possible result: Printed electronics that make the IoT ubiquitous and put an end to the semiconductor industry as it exits today. Researchers from the Belgian nanotech research center Imec described how they inkjet-printed a 3,381-transistor logic circuit made out of plastic.

3D Printing Industry Outlook (2019 Overview)

3E Rapid Prototyping

As the 3D printing industry grows, new trends are emerging and the overall uses of the technology are evolving. In general the industry is growing, with multiple forecasts showing exponential increases in both spending on 3D printing and usage. billion in 2024.

NASA Urged to Accelerate 3D Printing on Space Station

3D Printing Review

NASA must move quickly to research 3D printing aboard the International Space Station, which likely has just six to 10 years of operational life left, a new report urges. But the use of 3D printing in space requires a strong understanding of materials science to make it work.

Report 130

How 5 Major Automobile Manufacturers Use 3D Printing

3E Rapid Prototyping

3ERP has covered many of the different ways automobile manufacturers are benefiting from the advantages 3D printing brings to the forefront. This article aims to provide insight into the many ways some of the biggest automobile manufacturers in the world use 3D printing in their workflow.

Manufacturing Technologies Growth Trends and Forecasts

3E Rapid Prototyping

Here, we take a look at the growth trends from CNC machining, 3D printing and vacuum casting for 2019 and look onwards for forecasts. 3D Printing. By 2018, 64% of A&D companies are using 3D printing in production, leading all other industries included in the survey.

CNC Milling: Everything You Need to Know

3E Rapid Prototyping

Although most people are more familiar with 3D printing as a way to produce precise physical prints, CNC milling has been around for longer and is still widely used today. CNC Milling vs. 3D Printing. The primary materials used in 3D printing are plastics.

Manufacturing Jobs Outsourced to Space

Design 2 Part News

Although it’s somewhat open for debate, the International Space Station is currently scheduled for retirement somewhere between 2024 and 2028. By Industrial Equipment News. How it’s becoming cheaper and more efficient to manufacture 250 miles above the earth.

DIMENSIONEXT: Scanning On One Planet & 3D Printing On Another.


Scanning On One Planet & 3D Printing On Another. Scanning On One Planet & 3D Printing On Another. has committed to extend its support of the International Space Station until 2024. And 3D printing has its own key place to play in that journey. Google Enter 3D Printing.

AM Medical Creates Timely Forum Where Medicine and Technology Meet to Transform Lives

Additive Manufacturing

ASME announces impressive roster of expert speakers, exhibitors and exclusive tours for first-of-its-kind 3D printing for medical and dental devices event in Minneapolis, May 27-28. billion by 2024, according to a recent report from Global Market Insights.

Nano Dimension successfully BioPrint Stem Cell-Derived Tissues

3D Printing Industry

NASDAQ, TASE: NNDM), a leader in the area of 3D Printed Electronics, today announced it has successfully lab-tested a proof of concept 3D Bioprinter for stem cells. The post Nano Dimension successfully BioPrint Stem Cell-Derived Tissues appeared first on 3D Printing Industry.

Introducing Root, a 3D printed robot that will teach kids coding


This advanced computer literacy will become even more important for the next generation, as by 2024, over 1 million more programming jobs are expected to emerge. 3D Printing Applications