Citizen Life in 2030

3D Perspectives

Citizen Life in 2030 ” is the theme of our booth 4121 in LVCC, North Hall. This is ideal since in 2030, mobility experiences will be very different than they are today. Twitter: @DS_Alyssa The post Citizen Life in 2030 appeared first on 3D PERSPECTIVES.

Industry 2030 releases a vision of future European industry, identifies 3D printing as essential

3D Printing Industry

The Industry 2030 High Level Industrial Roundtable, an expert panel appointed by the European Commission, has identified 3D printing as a key driver of innovation in its latest report ‘A vision for the European industry until 2030’. Business basf Climate change Dochul Choi European Commission fossil fuels Industry 2030 Sami Haddadin Samsung Electronics Saori Dubourg TUM Munich School of Robotics and Machine Intelligence

RWTH Aachen study forecasts the future of 3D printing in 2030

3D Printing Industry

Applications 2030 3D biopritns Additive manufacturing creative commons Delphi forecasting Frank Piller Future localization maker spaces mass customization open source predictions Robin Kleer Ruth Jiang RWTH Aachen UniversityResearchers in the Technology and Innovation Management Group at RWTH Aachen University, Germany have predicted the most probable uses of additive manufacturing in the year.

Ceramics 3D Printing to Hit $4.8B by 2030, Says SmarTech

SmarTech Analysis has put out its most recent report on the ceramics additive manufacturing (AM) market, Ceramics Additive Manufacturing Part Production: 2019-2030. The report suggests that, even. View the entire article via our website.

100 3D printing experts predict the future of 3D printing in 2030

3D Printing Industry

3D Printing Industry asked 100 additive manufacturing leaders to identify how 3D printing will develop during the next ten years. In our article last week, we took a look at the near term trends in 3D printing to watch for 2020.

Felix 113

25% of Dubai Buildings Should Be 3D Printed by 2030, Says Ruler

3D Printer

On Wednesday, he announced that he believes the technology will be widely adopted by 2030. Dubai, a city famous for its breathtaking buildings, dry weather, and one that is often seen as a bastion of modernity in an otherwise undeveloped region.

UAE 163

Half million 3D printers sold in 2017 – on track for 100M sold in 2030

3D Printing Industry

3D Printing Industry research shows, the market for Desktop 3D Printers has experienced an acceleration of growth in 2018, with just under 500K desktop 3D printers sold. Extending and analysing the quarterly data provided by research firm Context, shows an impressive 52% year-on-year growth in 3D printer volume sales. This is a sizeable shift from […]. Industry Insights CONTEXT desktop 3D printers forecast M3D Monoprice myminifactory research Thingiverse xyz

Data 87

Saudi Arabia’s housing ministry and Al Kathiri Holding to develop concrete 3D printing processes

3D Printing Industry

Construction Al Kathiri Holding Alian Industry Co Emmedue Saudi Arabia Ministry of Housing Tadawul Vision 2030 agendaAl Kathiri Holding, a middle eastern building materials company, has received approval from the Saudi Arabia Ministry of Housing to develop and utilize 3D printed concrete for government-based projects. This approval follows a memorandum of understanding (MoU) signed between the company’s subsidiary Alian Industry Co.

KIZAD Polymers Park opens sustainable materials innovation in Abu Dhabi

3D Printing Industry

Materials Abdulaziz Alhajri abu dhabi Abu Dhabi Economic Vision 2030 Abu Dhabi Ports ADNOC Captain Mohamed Juma Al Shamisi Kizad KIZAD Polymers Park Samir ChaturvediKIZAD, the industrial free zone and subsidiary of Abu Dhabi Ports, is now the home of the KIZAD Polymers Park. Catering to a wide variety of markets, including 3D printing and material composites, the park is set to contribute an estimated $500 million to exports from the UAE each year.

UAE 56

Dubai Seeks to 3D Print 25 Percent of Its Buildings by 2030


Sheikh Mohammed bin Rashid Al Maktoum unveiling the Dubai 3D Printing Strategy. The United States launched its. Read the whole entry. » » usage

REJOINT Uses EBM, Sensors & IoT Data for Patient-Specific Knee Surgery

REJOINT is an Italy based medical device company specializing in Total Knee Arthroplasty operations that received 3 million Euro in EU Horizon 2030 funding in 2019.

Italy 60

Biodegradable vs. Recyclable Plastics

3D Printing Progress

In recent years, plastic production has accelerated, with global plastic set production to reach 600 million tonnes by 2030 if production continues at its current rate of growth. Which Is Better for the Environment?

Tech breakthroughs make new Prometheus rocket engine ten times cheaper

3D Printing Industry

The next generation of spacecraft, looking beyond 2030, will be powered by a rocket engine using breakthrough technology. The Prometheus is a liquid oxygen (LOx)-methane engine. Aerospace airbus airiane 6 Alain Charmeau ariane Ariane 5 ArianeGroup Avi ESA european space agency GE Liquid oxygen Lox Prometheus rocket rockets Safran Space vulcain

These Inventors Just 3D-Printed a House for Less Than $100

3D Printer

Building BigDelta is much more than a dream come true if we consider that, by 2030, international estimates foresee a rapid growth of adequate housing requirements for over 4 billion people living with yearly income below $3,000,” the company writes.

75 million contract signed by ESA for Ariane Group’s 3D printing enabled rocket engine

3D Printing Industry

The contract, signed on December 14th, will see the development of the Prometheus engine, described as “a very low cost engine” and intended for launches from 2030. The Ariane Group has signed a new contract with the European Space Agency for a next generation rocket engine. The economics of space are changing with enterprises such […].

Skyrora propels UK space missions with 3D printed rocket parts

3D Printing Industry

UK government aims to capture 10% of the global space market by 2030, and with a combination of private sector enterprise and advanced manufacturing (including 3D printing), a few companies have begun the countdown towards that target. Skyrora is a privately-funded launch vehicle developer with sites in Edinburgh, London, and the Ukrainian city of Dnipro. It aims […]. Aerospace Ariane 6 Black Arrow Daniel Smith EOS EOS M400 M400 rocket Skyrora Skyrora-1 Skyrora-XL Space

3D printing for a better world: MyMiniFactory announces Hope3D Design Competition winners

3D Printing Industry

In partnership with Snapmaker, Hope3D, a crowdsourcing platform for humanitarian 3D printing projects, integrated the UN Sustainable Development Goals of 2030 to find 3D printable environmental and education solutions. MyMiniFactory, a London-based 3D printable model sharing platform, has announced the winners of the Hope3D Design Competition.

Production of 3D Printed Promethus Rocket Engine Demonstrator Moves Along with New €75M Contract

In 2030, European launcher engines will look quite different than they do today. That’s the goal, anyway, and the development of the Prometheus demonstrator engine is a good start. Prometheus. View the entire article via our website. 3D Printing Aerospace 3D Printing Business 3d printed engine 3d printed rocket engine ArianeGroup CNES demonstrator ESA European Space Agency Prometheus

Bridging the gap

3D Perspectives

Some key stats from their May 2018 paper, “ Skill Shift: Automation and the Future of the Workforce ” include: Advanced IT and programming skills could grow as much as 90 percent between 2016 and 2030.

Study 80

Six Steps for Creating a Future Ready Workforce

3D Perspectives

The recent PwC report entitled Workforce of the Future – competing forces shaping 2030 – states that we are living through a fundamental transformation in the way we work.

A new International Centre for 3D Printing at Dubai Industrial City

3D Printing Industry

After Dubai claiming to be 3D print capital of the world, Dubai Holding has launched the International Centre for 3D Printing in line with the directives of Vice President and Prime Minister and Ruler of Dubai His Highness Sheikh Mohammed bin Rashid Al Maktoum, to make Dubai an International destination for 3D printing by 2030. By Pablo Rovelo.

Dubai now claiming to be world’s 3D print capital

3D Printing Industry

As a part of a “comprehensive strategy to exploit 3D technology to serve humanity,” the ruler of Dubai, Sheikh Mohammed bin Rashid, has declared by 2030, 25 percent of buildings in the city will take advantage of 3D printing […]. By Robert Cicetti. Dubai is back at it again, promising to build the city of the future, today.

Dubai aims to produce artificial limbs at $109

3D Printing Industry

In line with the Dubai 3D Printing Strategy launched in April, Humaid Al Qatami, chairman of the board and director general of DHA, announced that the authority has begun determining the work methodology of making Dubai a global capital of 3D printing technologies by 2030 in medical services. “As

UAE 83

A new, enormous 3D printer whips cheap homes out of mud

3D Printing Review

In a press release, the company points out that “by 2030, international estimates foresee a rapid growth of adequate housing requirements for over 4 billion people living with yearly income below $3,000.”. Yep, it’s that whole thing. Courtesy of World’s Advanced Saving Project).

Italy 130

Lithium Mining and Electric Vehicles: Powering Innovation and a Greener Future

3D Perspectives

million of them by the year 2030 through rebate programs. In India, plans are even more ambitious, with the government aiming to become 100% electric vehicle by 2030.

The next industrial revolution: do more with less

3D Perspectives

billion people in emerging markets poised to join the middle class by 2030 are likely to increase consumption of everything from food to water to energy. To meet global demand forecasts for 2030, we would need to boost gross domestic product per metric ton of materials by 1.3%

Developments in the Metal 3D Printing Segment

3D Innovations

Metal 3D Printing industry expected to be worth as much as $10 billion by 2030 to 2035. Today, 3D printing is a very small part of the metals industry, but it is growing rapidly and this market is expected to be worth as much as $10 billion by 2030 to 2035. As Terry Wohler’s put it best, this is the year of metal 3D printing. At trade shows globally, metal 3D printing has been a main focus for both speakers and attendees.

Glass 48

What does the sustainable economy mean for you?     

3D Perspectives

trillion in economic value by 2030 (according to global studies by Accenture ). We’ve all heard about how our carbon footprint represents the unintended negative consequences of our actions on the environment. But have you heard about our ecological handprint ?

Dubai releases tender for 3D-printed R&D

3D Printing Industry

The Solar Park will generate 1,000 megawatts (MW) by 2020 and 5,000MW by 2030.

UAE 83

Can we achieve sustainability without partnership?

3D Perspectives

trillion in economic value by 2030. Sustainability is at the heart of what Dassault Systèmes does. This is strongly linked to our purpose : provide business and people with 3D EXPERIENCE universes to imagine sustainable innovations capable of harmonizing product, nature, and life.

Harnessing 3D Printing Technology for Business

3D Innovations

The 3D printing metal segment is making great strides towards high volume manufacturing and McKinsey forecasts the industry to be worth as much as $10 billion by 2030 to 2035.

Survey says: personalization done right is a rising trend

3D Perspectives

Last year, we focused on what people expect cities to be like in 2030 – think Hyperloop rail, fully connected smart home systems, mobile payments and personalized preventive health plans. Once again, Dassault Systèmes is kicking off the year at CES in Las Vegas.

Big Data for the Future of Mobility – Insights About Opportunities and Challenges

BIS Research

Developing a deep understanding about the future market penetration level of connected vehicles by 2030 along with its sources and amount of data generation.

Leveraging “Design For Manufacturing” for More Sustainable Buildings

3D Perspectives

namely, California—there are some emissions limitations set by law, but most green building is done in the name of incentives such as LEED or the 2030 Challenge for Sustainability, among other programs.

What the Stakeholders Must Do to Make Electric Vehicles a Reality

BIS Research

Global Automotive Solid-State Battery Market – Analysis and Forecast, 2020 – 2030. Written by BIS Research Analysts Ajeya Saxena.

Analyzing the Growth of the Liquid Biopsy Market for Latin America

BIS Research

According to the Pan American Health Organization, a rise of 67% is expected in the incidences of cancer by 2030 in comparison with 2012, in Latin America.

What’s the status with sustainable manufacturing?

3D Perspectives

The prediction is that 85% of jobs that will exist in 2030 haven’t been invented yet. Most companies today are on a journey towards sustainability.

3DEXPERIENCE FORUM: AEC Industry Track Recap

3D Perspectives

Mobility Services to Gain Quality of Life in 2030: the Modul’Air Experience. AEC leaders gathered in Las Vegas this week to take part in the Dassault Systèmes 3D EXPERIENCE FORUM, a unique event that explores innovation across a number of industries.

The first European Consumer Launch of the QUANT-U Footwear Experience at Le Bon Marché

3D Perspectives

In a recent survey , 81 percent of consumers expect to use digital technologies in stores and 71 percent expect to purchase fully sustainable products by 2030.

Hawaii Doubles Down on Commitment to Innovation

3D Innovations

This past Tuesday (June 7, 2015) Governor David Ige enacted two pieces of legislation aimed at supporting innovative small businesses and manufacturing here in Hawaii.

Making Cities Bigger and Better

3D Perspectives

Meanwhile cities themselves are growing, with the number of megacities —those with populations greater than 10 million—expected to hit 41 by 2030, up from 28 today and just 10 in 1990. By Catherine Bolgar.

Profiting From Unity

3D Perspectives

A PwC–sponsored report entitled “Global Construction 2030,” published by Global Construction Perspectives with Oxford Economics, predicts a compound growth of 85%, to US$15.5 trillion, by 2030. The construction industry is turning to the cloud for improved efficiency and profitability.

Economist: Manufacturing Revives in 2016’s Second Half

Design 2 Part News

Beaulieu is forecasting a relatively mild recession in 2019 and another “Great Recession” in 2030, brought on by governments unable to cope with their debt levels. “In In 2030, the federal government is broke,” he said. “I By Bill Koenig, Manufacturing Engineering. PALM DESERT, CA – The US manufacturing economy will revive in the year’s second half, helped by stabilizing energy prices and reviving demand in China, an economist said today. “We’re

China 40