NRC Canada Partnering with Polycontrols to Scale Up Cold Spray Additive Manufacturing

3DPrint.com

Last year, we learned that Jean-Michel Lamarre and Fabrice Bernier of the National Research Council (NRC) of Canada had started fabricating electric motor magnets using a process called cold spray. 3D Printing 3D Printing Materials 3D printed magnets 3d printing facility Canada cold spray additive manufacturing cold spray technology CSAM metal additive manufacturing metal powder 3d printing National Research Council of Canada partnership Polycontrols

Canada’s Holistic Innovation in Additive Manufacturing Network gains Arcam EBM machine

3D Printing Industry

Canada’s Holistic Innovation in Additive Manufacturing Network (HI-AM) is advancing metal 3D printing for aerospace, automotive and the medical sector. Funded by the Natural Sciences and Engineering Research Council of Canada (NSERC) and the Canada Foundation for Innovation (CFI), the HI-AM was set up in 2018 to address the challenges in metal 3D printing.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Wire-Arc Additive Manufacturing with Nickel Aluminum Bronze Cu-9Al-4Fe-4Ni-1Mn

3DPrint.com

Researchers from Canada and India are delving further into the science of materials in 3D printing, outlining their findings in the recently published ‘Microstructural evolution and mechanical.

Western Canada Announces $5 Million for Additive Manufacturing Hub

3DPrint.com

Additive manufacturing promises to grow into a $6.9 billion industry in the next four years, and as it continues to expand all over the world, Western Canada announces its intentions to join in. 3D Printing 3D Printing Canada Canada Orthopaedic Innovation Centre Stratasys Direct Manufacturing western canada Western Economic Diversification

P&G Canada, Canada Makes, and AMM Team Up to Explore Possibilities and Benefits of Metal Additive Manufacturing

3DPrint.com

To further explore the possibilities and benefits of additively manufacturing new, customized parts, and adding the technology to its supply chain, the Procter & Gamble (P&G) Canada plant in. View the entire article via our website.

Fabricating Better Magnets with Cold Spray Additive Manufacturing

3DPrint.com

3D Printing Science & Technology 3D printed magnets 3D printed permanent magnets Canada cold spray additive manufacturing cold spray technology electric motors magnets National Research Council of CanadaThe high-performance magnets used in electric motors are typically made through processes like powder compaction, for sintered magnets, or injection molding for bonded magnets. These processes. View the entire article via our website.

Industrial 3D Printing Advances in Canada: University of Waterloo Receives $8.9M Government Investment for World-Class Multi-Scale Additive Manufacturing Lab

3DPrint.com

Canada is going all in with 3D printing—if the University of Waterloo has anything to do with it. About to make very good use of a federal grant for $8.9 million from their government, the University. View the entire article via our website.

3D printing business roundup: Canada Makes, HP, Collplant, CRP Group

3D Printing Industry

Building toward some of the biggest events in the 3D printing industry calendar, additive manufacturing companies are announcing their latest business deals including new investments, partnerships and international distribution. In this article, we review recent activity from Canada Makes, EOS, CRP Group, HP, Nano Dimension, Thales Group, A*STAR and CollPlant. Canada Makes partners with 3D design […].

Misconceptions of Metal Additive Manufacturing – Certification

Deelip

In my travels across India I often meet customers interested in metal additive manufacturing. I feel the need to set the record straight and have chosen this topic as the first misconception of metal additive manufacturing that I will address in this series of articles. At the risk of oversimplifying something as complex as metal additive manufacturing, I will say that there are essentially four main components at play: The 3D Printer.

SOLIDWORKS and Additive Manufacturing are a Pairing for Perfection

Javelin Tech Tips

While there were several pod storage options from the machine’s manufacturer and various other vendors, none of them exactly suited our needs. Luckily, we had an office full of SOLIDWORKS design experts and the most robust additive manufacturing lab in Western Canada at our disposal!

Canada Makes announces new partnership with Javelin Technologies

Javelin Tech Tips

Canada Makes, Canada’s leading additive manufacturing organization and network, announced their new partnership with Javelin yesterday! For more information on Canada Makes partnerships, visit www.canadamakes.ca.’

Canada Opens Metal 3D Printing Research Center for Marine and Defense Industries

3DPrint.com

This week, Canada opened its first research center for metal 3D printing for the marine and defense industries. The Marine Additive Manufacturing Centre of Excellence was launched by the University. 3D Printing Business Metal 3D Printing Science & Technology Canada Collège Communautaire du Nouveau-Brunswick Custom Fabricators and Machinists Irving Shipbuilding Inc.

The Impact of 3D Printing on Canada’s Health Care Industry [VIDEO]

Javelin Tech Tips

Spotlight on 3D Printing for Medical Applications. On November 15th 2017, Cogeco TV visited Javelin Technologies’ Oakville headquarters for a tour of the 3D Printing lab. 3D Printing in Health Care. Interested in 3D Printing?

3D Printing News Briefs: February 12, 2020

3DPrint.com

In today’s 3D Printing News Briefs, we’ve got materials news, then some collaborations and an education story to share. First, KRAIBURG TPE is examining if its thermoplastic elastomers. View the entire article via our website.

Groupe Meloche to carry out additive manufacturing projects for big names in aerospace

3D Printing Industry

Canada’s Groupe Meloche, an OEM aircraft and aerostructure component supplier, has signed a 3D printing partnership agreement with French metal additive specialist FusiA Impression 3D Métal. Advancing an initiative “to deliver world-class performance” and cut “manufacturing turnaround times,” the companies will work together to complete additive manufacturing projects for some of the largest global brands in […].

Thanks to a Group Effort, 3D Printed Satellite Bracket Will Soon Go to Space

3DPrint.com

3D printing technology has really changed the face of manufacturing for many applications and sectors, including outer space. Canada’s premier additive manufacturing network, Canada Makes, View the entire article via our website.

Wohlers Associates, Inc. – Design for Additive Manufacturing Course in Cooperation with Airbus and ZAL in Hamburg, Germany

Additive Manufacturing

is taking its internationally acclaimed course on design for additive manufacturing (DfAM) to Hamburg, Germany. Wohlers Associates, publisher of the popular Wohlers Report , has identified DfAM as one of the key barriers to companies adopting AM, more commonly known as 3D printing.

SENVOL: Selecting the Most Cost-Effective Location for Additive Manufacturing (AM) Production

Additive Manufacturing

SENVOL prepared the case study for the Government of Canada. Case Study: Selecting the Most Cost-Effective Location for Additive Manufacturing (AM) Production. As stated by Zach Simkin, “When we talk about lean manufacturing, a 14% cost differential is quite substantial.”.

MySolidWorks Manufacturing Network now available for Canada & International

Javelin Tech Tips

MySolidWorks Manufacturing Network. The MySolidWorks Manufacturing Network let’s SOLIDWORKS users bring their designs to life by easily finding and connecting with reliable manufacturers offering 3D printing , sheet metal , CNC machining , and injection molding services.

Sciaky to Deliver Industry-Leading Electron Beam Additive Manufacturing (EBAM®) System to Burloak Technologies

Additive Manufacturing

EBAM system will 3D print large metal parts for prominent OEMs, making Burloak Technologies the first EBAM Parts Bureau in Canada serving aerospace, defense and other industries . .

3D Printing Industry News SLICED: Rize, 3D Systems, Essentium, Protect3d, Xioneer Systems

3D Printing Industry

In this edition of Sliced, the 3D Printing Industry news digest, we cover the latest partnerships, acquisitions, medical developments and creative applications from across our industry.

Additive Manufacturing: The State of the Industry

Design 2 Part News

By Terry Wohlers, President, Wohlers Assoicates Inc. , Tim Caffrey, Manufacturing Engineering. This article includes highlights from Wohlers Report 2016, the 21st annual worldwide progress report on the 3D printing and additive manufacturing state of the industry.

Researchers Publish Proof of Concept Detailing Inkjet Additive Manufacturing Process for Memory Devices

3DPrint.com

3D Printing 3D Printing Materials Science & Technology 3d inkjet printing 3d printable electronics Canada CB-RAM germany inkjet printing INRS-EMT journal article memory devices Munich University of Applied Sciences proof of concept research paperEvery day, at work, at home, and out in the world, our lives involve the use of low-performance electronic functions that are implemented in computer chips for items like credit cards. These memory.

Additive Manufacturing in the medical and dental industry

3D Printing Industry

In addition, an enhanced wall-fitting tool allows users to accurately extract walls from point clouds without having to scan both sides of the wall. For additional information please visit www.FARO.com. 3D PrintingLAKE MARY, Fla. , May 24, 2016 – FARO Technologies, Inc.

Faro 83

RAPID + TCT – Celebrating 30 Years at the Forefront of Additive Manufacturing and 3D Printing Technologies

Additive Manufacturing

RAPID + TCT is one of the most influential and largest additive manufacturing events in North America, offering a broad range of activities and topics including additive manufacturing, 3D scanning, CAD/CAE, metrology and inspection and much more.

Reduce Manufacturing Costs Events in Western Canada

Javelin Tech Tips

that are proven to reduce manufacturing costs. 1 How to Reduce Manufacturing Costs with SOLIDWORKS Electrical. Learn how many companies have been able to increase their competitive advantage within their electrical/mechanical design and manufacturing businesses.

The Role of Artificial Intelligence in Manufacturing 3D Printing Materials

3DPrint.com

As additive manufacturing technology continues to grow and spread, countries all over the world are working hard to make sure they’re always on top, and even ahead of, the latest innovations. View the entire article via our website.

Canada’s AM metal powder industry gets $8M boost at Equispheres

3D Printing Industry

Canadian additive manufacturing powder producer Equisperes has just received an $8 million investment from early stage and SME financing bank BDC Capital. Headquartered in Ottawa, Ontario, and driving at the green-benefits of metal 3D printing, Equishperes is well-positioned within BDC’s ongoing commitment to high-potential Canadian cleantech firms.

Wohlers Associates and the Québec Industrial Research Centre Partner to Offer Design for Additive Manufacturing Training in Montreal

Additive Manufacturing

has entered into a partnership with Québec Industrial Research Centre ( CRIQ ) to offer, for the first time in Canada, three days of intensive training on design for additive manufacturing (DfAM). Featured News Additive Manufacturing CRIQ Denis Hardy design for additive DfAM Inc.

Canadian researchers in pursuit of artificially intelligent 3D printers

3D Printing Industry

New research from the University of New Brunswick in Canada seeks to pair artificial intelligence with 3D printing technologies for application to manufacturing. Edward Cyr’s research, funded by a McCain postdoctoral fellowship, aims to develop an AI system that will approach a problem and 3D print its solution after considering all the alternatives.

H.C. Starck Announces New AMPERPRINT® Metal Powder Program for Additive Manufacturing

Additive Manufacturing

Starck Surface Technology and Ceramic Powders GmbH , based in Laufenburg and Goslar, is introducing its new AMPERPRINT® range of gas atomized metal powders which is specifically designed for additive manufacturing. Starck’s position in the continuously growing 3D printing market.

3D Printing News Briefs: August 24, 2018

3DPrint.com

We’re sharing some business news in today’s 3D Printing News Briefs, followed by some interesting research and a cool 3D printed statue. Meld was listed as a finalist in the R&D 100. View the entire article via our website.

Wohlers Associates and America Makes Offer Course on Design for Additive Manufacturing for Managers and Executives

Additive Manufacturing

Fort Collins, Colorado, and Youngstown, Ohio, August 28, 2019 — Wohlers Associates and America Makes are partnering to offer a one-day design for additive manufacturing (DfAM) course for managers and executives.

H.C. Starck Expands Additive Manufacturing Business

Additive Manufacturing

Focus on further development and expansion of production technology for spherical metal powders, a key material for additive manufacturing (industrial 3-D printing). Canada, the United Kingdom, Germany, China, Thailand, Vietnam and Japan.

Testing the Mechanical Properties of FDM 3D Printed Shape Memory Polymers

3DPrint.com

University of Alberta thesis student Danesh Zonoobi takes fabrication potential to the next level, exploring the world of 4D in ‘Mechanical Properties of Extrusion-Based Additive Manufacturing of. 3D Printing 3D printed shape memory polymers 4D Canada fdm 3d printing gradient materials mechanical properties shape memory Shape Memory Polymers SMPs soft Ultimaker 3 university of alberta

Pyrogenesis Announces That It Will Produce Specialty Powders for the Additive Manufacturing Industry, Specifically for 3D Printing

Additive Manufacturing

PyroGenesis’ Plasma Atomization Process (PAP) is an enabling technology for 3D Printing as well as other additive manufacturing and powder metallurgy applications. About PyroGenesis Canada Inc. PyroGenesis Canada Inc., Source: PyroGenesis Canada Inc.

Javelin Technologies named one of the fastest growing companies in Canada for second year in a row

Javelin Tech Tips

Canadian Business and PROFIT have named Javelin Technologies , specialists in 3D design and 3D printing , as one of the Fastest-Growing Information Technology Companies on the PROFIT 500 list. Canada − and the world − needs more entrepreneurial success stories like these.”.

Latest report on “Global Industry Study on 3D Printing & Additive Manufacturing in the Aerospace & Defence Market by Application, Type, Manufacturers, and Regions, Forecast up to 2021”.

RPM Tools

This report categorizes the 3D Printing & Additive Manufacturing in the Aerospace & Defence market based on manufacturers, regions, type and 3D Printing & Additive Manufacturing in the Aerospace & Defence market application.

PyroGenesis Announces That First 3D Printable Metal Powder Production System is Complete and "Exceeds Expectations"

3DPrint.com

It seems like every time I turn around, I’m learning of more and more innovative 3D printing news coming from Canada. There’s Ottawa Hospital’s 3D printing program, the 3D. View the entire article via our website.

Metal 58

Eight 3D printed musical instruments coming to Ottawa Symphony Orchestra

3D Printing Industry

The Ottawa Symphony Orchestra’s (OSO) 3D String Theory Project has designed, and will produce, eight functional 3D printed string instruments for a live classical performance at the Canadian Aviation and Space Museum (CASM) later this year. This project is a collaborative effort between the OSO, Canadian violin maker, Charline Dequincey, additive manufacturing network Canada Makes, […].

Sciaky’s Electron Beam Additive Manufacturing (EBAM™) Technology Helps Submarine Manufacturer Save Significant Time and Cost By 3D Printing a Titanium Variable Ballast (VB) Tank

Additive Manufacturing

PSI) , and leading provider of metal 3D printing solutions, announced today that its Electron Beam Additive Manufacturing ( EBAM™ ) technology helped International Submarine Engineering ( ISE ), Ltd. Sciaky is a member of the Michigan Aerospace Manufacturing Association (MAMA).

3D Printing News Briefs: August 1, 2017

3DPrint.com

We’ve got a lot of 3D printing business news to cover in the first August edition of 3D Printing News Briefs, and then we’ll move on to 3D printing materials and some gaming news. Sigma. View the entire article via our website.

Metal 3D printer uses cold spray to make better motors

3D Printing Industry

A new metal 3D printer developed by scientists at the National Research Council of Canada (NRC) has created high-performance magnets using cold spray additive manufacturing. The 3D printed magnets, manufactured by Fabrice Bernier and Jean-Michel Lamarre at the NRC laboratory in Boucherville, Quebec, will be used to enhance the design of electric motors. 3D printing […].