Additive Manufacturing Materials Talent Insight

3DPrint.com

Recently, at AMPM2019 Conference in Phoenix, Additive Manufacturing industry experts identified materials as one of the main challenges of the 3D printing industry and its growth. 3D Printing Sponsored 3D design jobs 3d jobs 3d printing jobs 3d printing jobs site 3d printing recruitment 3D printing war for talent additive manufacturing jobs i-AMdigital recruiting war for talent

Prize winning space-time research expands design for additive manufacturing

3D Printing Industry

Researchers from the Delft University of Technology (TU Delft) in the Netherlands have developed a method to concurrently optimize 3D printed structures and the fabrication sequence that creates them, specifically in the wire arc additive manufacturing process (WAAM). Research Delft University of Technology International Society of Structural and Multidisciplinary Optimization ISSMO tu delft WAAM wire arc additive manufacturing process

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Additive Manufacturing Apprenticeship Now Available

3DPrint.com

While traditional manufacturing jobs may be declining, they’re being replaced by advanced manufacturing positions requiring skills in such things as 3D design and additive manufacturing. 3D Printing Business additive manufacturing apprenticeships america makes apprenticeships Robert C.

Additive manufacturing moves beyond the “cool” phase

Leslie's Blog

The next trend you’ll find with Additive Manufacturing (AM), also known as 3D printing, is the growth of additive services. SMS Research Advisors conducted a survey on additive manufacturing. And 47% said service bureaus offer access to additive expertise.

2020 Additive World Design for Additive Manufacturing Challenge Winners Announced Virtually

3DPrint.com

This week, during the 8th Additive World Conference in Eindhoven, the winners of the Additive World Design for Additive Manufacturing Challenge 2020 were announced virtually by Ultimaker’s.

MIT’s online Additive Manufacturing course returns

3D Printing Industry

After a successful first edition earlier this year, Massachusetts Institute of Technology (MIT) will run a further Additive Manufacturing course, led by Professor A. First held in Spring 2018, enrollment is again open for Additive Manufacturing for Innovative Design and Production.

Additive Manufacturing: Still a Real Need for Design Guidelines in Electron Beam Melting

3DPrint.com

3D Printing 3D printing design guidelines additive manufacturing research ARCAM A2 3D printer Design for Additive Manufacturing (DFAM) EBM 3D printing Ti6Al4VResearchers from King Saud University in Saudi Arabia explore the potential—and the challenges—for industrial users engaged in metal 3D printing via EBM processes. Their findings are outlined in the. View the entire article via our website.

3D Systems’ new focus on additive manufacturing

Leslie's Blog

With a new president and CEO, 3D Systems used the IMTS Show to announce it is taking its 3D printing businesses in a new direction—focusing on additive manufacturing for production.

Additive manufacturing technology moves into production

Leslie's Blog

Is 3D printing /Additive manufacturing shifting out of prototyping? However, the conversation on how to create additive manufacturing (AM) systems for the factory operation is definitely heating up. Parts will need additional finishing after build.

Cambridgeshire bypass bridge designed using additive manufacturing

3D Printing Industry

The English city of Ely in Cambridgeshire has established a 1.7km single carriageway Bypass made with the support of additive manufacturing technologies.

How to Design for Additive Manufacturing

Wohlers Talk

It is critical for organizations to take a number of factors into account when considering the use of 3D printing for part manufacturing. Among the most important is design for additive manufacturing (DfAM).

Markforged launches Additive Manufacturing University to accelerate adoption of 3D printing

3D Printing Industry

Boston-based 3D printer manufacturer Markforged has launched its Additive Manufacturing University program – a new scheme of workshops, learning exercises, on-site trianing and resources.

Iterative design and additive manufacturing

Leslie's Blog

After each race, the engineers tweak one or more prototypes on additive manufacturing (AM) machines back at the shop and install them on the race car. ” The designers never really finish a design. Such an exploration of continuing design improvement would not be possible without additive manufacturing. While selective laser sintering is a common method of additive manufacturing, other metal AM processes are also used.

Additive Manufacturing Takes Flight with Marshall Aerospace

Stratasys Blog for a 3D World

That’s why additive manufacturing is becoming a natural fit for their production processes and they’re now using 3D printed parts from Stratasys that are built-to-fly. Learn how to put the power of Stratasys technology to work in your high-requirement manufacturing environment.

5 Places Additive Manufacturing is Unstoppable

Stratasys

As additive manufacturing technologies have advanced, 3D printed parts have moved decidedly outside the Research and Development arena and onto the production line. These pivotal processes are developing and producing concepts previously unattainable in the manufacturing world.

Additive manufacturing turns design efficiency on its head

Leslie's Blog

Design cost out by increasing part complexity. Tyler Reid, Manufacturing Application Manager, GoEngineer. Engineers are normally introduced to the concept of design for manufacture (DFM) while in school. But the reality is that the majority of engineers don’t actually learn how to design for manufacture until they are on the job. And this can be a hard lesson. The CAD model is only the first step in the long journey from concept to physical part.

Additive Manufacturing for Combat Aircraft

3D Printing Progress

BAE Systems have signed an agreement to work with Renishaw on the development of additive manufacturing capability for the defence and aerospace sector, designed to help improve performance, reduce costs and speed up manufacturing processes on combat aircraft of the future

Job opportunity: Research Assistant/Associate in Design for Additive Manufacturing

Capturing the Value

We’re delighted for our colleague at the IfM, James Moultrie, who recently won EPSRC funding for a new project “ Design for Additive Manufacturing “ Following his success, James is now looking for a researcher to join the project. 3d printing additive manufacturing 3D printing D4AM design for additive manufacturing EPSRC IfM institute for manufacturing James Moultrie job job opportunity University of Cambridge

Additive Manufacturing Could Prove Promising in Development of Hydraulic Pumps

3DPrint.com

Saimaa University of Applied Sciences thesis student, Daniil Levchenko, explores the capabilities of complex 3D printing in ‘Design of a Hydraulic Pump for Construction with Additive Manufacturing. 3D Printing 3D printed hydraulics 3D printed pumps 3D printing hydraulics 3D printing thermoplastics additive manufacturing BCN3D Sigma 3D printer objet30 Prime Stratasys Objet30 study thesis

Accelerated Insertion of Materials for Additive Manufacturing

Additive Manufacturing

PITTSBURGH (November 1, 2018) … Additive manufacturing (AM), or 3D printing, presents a game-changing opportunity for the space industry to produce complex components with greater efficiency at a lower cost. By Paul A.

Design for Additive Manufacturing with SOLIDWORKS Simulation Topology Study

Javelin Tech Tips

Additive manufacturing is no longer a bleeding edge technology; this powerful method is being used across countless industries , for applications ranging from rapid prototyping to jigs/fixtures and production end-use parts.

Help shape the future of additive manufacturing in the UK

3D Printing Industry

At the Manufacturing Technology Centre (MTC) in Coventry, Martin Dury, Learning Design Manager, and his team are working to address the manufacturing skills gap, encouraging UK businesses to be agile and adopt new technologies. Currently, Dury is mapping a number of Additive Manufacturing Competency Frameworks for all roles in AM.

MTC calls for contributions to stem additive manufacturing skills shortage

3D Printing Industry

The UK’s Manufacturing Technology Centre (MTC) is where 3D printing and traditional manufacturing converge. Education Advanced Manufacturing Training Centre AMTC apprenticeships automation Design for Additive Manufacturing Loughborough University Manufacturing Technology Centre Martin Dury Metrology MTC National Centre for Additive Manufacturing skills gap training TWI University of Birmingham University of Nottingham

Event: Identifying and Developing Additive Manufacturing Skills for UK Industry

Capturing the Value

The Manufacturing Technology Centre, Coventry ( directions here ). Investment in education and training leading to the provision of the right skillsets at the right time will be key if UK industry is to capture the opportunities afforded by the adoption of Additive Manufacturing technologies. 31st March 2017, 10:00 – 16:00. Register your place.

Link3D launches Material Tracking System to improve additive manufacturing production traceability

3D Printing Industry

Link3D, a New York-based additive manufacturing workflow software company, has announced the launch of a Material Tracking System software module at the Additive Manufacturing Conference in Austin, TX. The new add-on will be integrated into the company’s existing Additive Manufacturing Execution System (MES) workflow Software. Link3D has designed the Material Tracking System module to enable […].

Additive manufacturing–your way

Leslie's Blog

It looks like Stratasys is also working on increasing the efficiency of design to 3D print experience. It has developed a customer-focused Additive Manufacturing Ecosystem designed to help you design and manufacture better products, your way.

State University of New York offers first of its kind Summer Additive Manufacturing Institute

3D Printing Industry

SUNY New Paltz, NY, is to a hold a Summer Additive Manufacturing Institute for professionals July 31 – August 4 2017. The five day course is designed.

Laser Institute’s LAM Workshop Explores State of the Art in Additive Manufacturing

3D Printer

Lasers are an integral part of many 3D Printing processes, making it a natural fit that the Laser Institute of America [LIA] annually produces the Laser Additive Manufacturing [LAM] Workshop. Keynote Describes How GE Is Moving Additive to the Mainstream.

Book of the Week: Design for Additive Manufacturing

Fabbaloo

Design for Additive Manufacturing by Martin Leary [Source: Amazon]. This week’s. Read the whole entry. » » book

Arizona State University opening Additive Manufacturing facility with Concept Laser

3D Printing Industry

Arizona State University (ASU) are opening the 'largest Additive Manufacturing facility in the South West'. Education Additive manufacturing additive manufacturing arizona arizona arizona concept laser Arizona State University ASU Concept Laser Don Godfrey honeywell honeywell aerospace honeywell aviation John Murray PADT Phoenix analysis & design technologies Rey Chu

Here they come—faster additive manufacturing systems

Leslie's Blog

Additive manufacturing (AM) machines and 3D printers have a reputation for being slower than users desire when it comes to building a part. Speed depends on part design, material, and the selected additive build process.

More additive manufacturing systems for production

Leslie's Blog

Some executives believe that the current state of additive manufacturing equipment is too focused on prototyping instead of production. But more companies continue to enter the space of additive manufacturing, especially for metal materials.

DNV GL publishes first class guideline for maritime additive manufacturing

3D Printing Industry

2017 has been a standout year for additive manufacturing in marine and offshore operations. However, it is the rise of metal additive manufacturing that has started to cause a real […]. Transport classification Design for Additive Manufacturing DfAM DNV GL guidelines Knut Ørbeck-Nilssen marine maritime Norheim Marit Norheim offshore oil & gas qualification Ramesh Babu Goindaraj

SME launch ITEAM Consortium to maximize profitability and design for additive manufacturing

3D Printing Industry

SME, co-organizers of the RAPID + TCT event, are collaborating with 3D printing industry experts to produce web-based evaluation for companies looking to utilize additive manufacturing.

Sandia Labs apply design for additive manufacturing to build precision telescope

3D Printing Industry

By leveraging the advantages of design […]. Design Design for Additive Manufacturing DfAM Sandia Sandia National Laboratories SERIIUS Ted Winrow telescope toolingUsing sub-par materials and inaccurate dimensions does not sound like the appropriate start to a precision engineering project.

Mitigating Supply Chain Risk with End-to-End Automated Additive Manufacturing

Javelin Tech Tips

When considering Additive for its speed, flexibility, and efficiency, examine how to extend these benefits through the final step of the process. Mitigating risk within supply chains is a goal that most manufacturers work toward improving incrementally. Where Additive Comes In.

How to improve the design to additive manufacture workflow

Leslie's Blog

With 3DSPRINT we are giving engineers and designers the ultimate streamlined shared cloud and desktop platform experience that makes the design-to-manufacturing workflow faster, simpler and ubiquitously connected.”.

How Universities are Using Additive Manufacturing

Modern Tech

Additive manufacturing continues to be an asset in developing products in many industries due to the quick turnaround for creating prototypes which saves both time and money.

User views on metal additive manufacturing

Leslie's Blog

While many users of metal 3D printing / additive manufacturing want to keep their projects quiet for competitive reasons, the user market is large. Arcam is one the major vendors of metal additive manufacturing (AM) with customers in the aerospace and healthcare industries.

Metal Powder Industries Federation publishes standards for additive manufacturing

3D Printing Industry

The worldwide Metal Powder Industries Federation (MPIF) has published A Collection of Powder Characterization Standards for Metal Additive Manufacturing. A compilation of nine existing test methods relating to metallic powdered feedstock, the document is intended to help “clarify the technology as an aid in conducting business” for designers and manufacturers.

What engineers wanted to know about additive manufacturing in 2017

Leslie's Blog

Readers were looking for information on working with various types of materials in additive manufacturing. And readers were looking for information on reducing additive production cycles. Working with metal materials for additive manufacturing. It’s the end of 2017.

Additive Manufacturing Technologies unveils integrated post-processing Digital Manufacturing System at Formnext 2019

3D Printing Industry

UK-based post-processing specialist Additive Manufacturing Technologies (AMT) has launched its new Digital Manufacturing System (DMS) at Formnext 2019. Namely, the system was designed to address the manual stages between 3D printers […].

Integrating Next-Generation Technology: Additive Manufacturing Overview

The Solidworks Blog

Additive Manufacturing (AM) has been in existence since the 1980’s. Today, however, industrial manufacturers across the globe, from aerospace to education, are adopting AM as a viable means to influence every stage of the product lifecycle.