3D Printing Industry

APRIL 10, 2019

Phillips Corporation, a Maryland-based supplier of industrial machinery solutions, has launched an additive manufacturing training service for federal facilities called MyAM. Marotto has experience in implementing additive manufacturing technologies into the […]. The company, who offers 3D printing systems from EOS and Optomec, recently welcomed Howard Marotto, a U.S. Marine Corps Reserve Colonel, to its Business Development team.

Maryland 74

Maryland Training Additive Manufacturing System 74

3D Printing Industry

FEBRUARY 27, 2018

At the Manufacturing Technology Centre (MTC) in Coventry, Martin Dury, Learning Design Manager, and his team are working to address the manufacturing skills gap, encouraging UK businesses to be agile and adopt new technologies. Currently, Dury is mapping a number of Additive Manufacturing Competency Frameworks for all roles in AM.

Additive Manufacturing 87

Additive Manufacturing Training Design Education 87

3D Printing Industry

AUGUST 21, 2019

The European Federation for Welding, Joining and Cutting (EWF) has launched an international education, training and qualification system for additive manufacturing personnel. Education Additive Manufacturing Qualifications Brunel University London European Federation for Welding EWF Joining and Cutting LZH Laser Akademie GmbH SAM SAM project Sector Skills Strategy in Additive Manufacturing

Additive Manufacturing 76

Additive Manufacturing Training Engineering System 76

3D Printing Industry

FEBRUARY 16, 2018

The UK’s Manufacturing Technology Centre (MTC) is where 3D printing and traditional manufacturing converge. Education Advanced Manufacturing Training Centre AMTC apprenticeships automation Design for Additive Manufacturing Loughborough University Manufacturing Technology Centre Martin Dury Metrology MTC National Centre for Additive Manufacturing skills gap training TWI University of Birmingham University of Nottingham

Additive Manufacturing 87

Additive Manufacturing Research Training Printing 87

3D Printing Industry

NOVEMBER 20, 2019

Siemens has launched its Additive Manufacturing Network, a cloud-based solution fostering collaboration between engineers, and suppliers for the creation of 3D printed parts.

Siemens 65

Siemens Additive Manufacturing Training Company 65

Capturing the Value

MARCH 13, 2017

The Manufacturing Technology Centre, Coventry ( directions here ). Investment in education and training leading to the provision of the right skillsets at the right time will be key if UK industry is to capture the opportunities afforded by the adoption of Additive Manufacturing technologies. 31st March 2017, 10:00 – 16:00. Register your place.

Additive Manufacturing 100

Additive Manufacturing Strategy Training Government 100

3D Printing Industry

JANUARY 23, 2019

Additive manufacturing consultancy firm The Barnes Group Advisors (TBGA) has signed an intellectual property license agreement with Tiziri Advanced Manufacturing Technologies (TiziriTech) headquartered in Pretoria, South Africa. Under this agreement TiziriTech will use TBGA’s resources to provide on-site training to customers in Africa and the Middle East. In recent months, TBGA has signed a number of training agreements […].

South Africa 72

South Africa Africa Groups Training 72

3D Printing Industry

DECEMBER 6, 2019

AdventHealth Nicholson Center, a Florida-based medical training facility, has launched its Prototype Lab to enable the development of medical devices using additive manufacturing technology.

Florida 52

Florida Training Medical Additive Manufacturing 52

3D Printing Industry

APRIL 11, 2019

At the 3rd Additive Manufacturing Forum in Berlin, German railway company Deutsche Bahn (DB), the Austrian Federal Railways (ÖBB), Italian train operator Trenitalia and government-owned Swedish railways company SJ signed a Memorandum of Understanding (MoU) by proxy of seven European railways.

Additive Manufacturing 77

Additive Manufacturing Government Training Company 77

Additive Manufacturing

OCTOBER 17, 2018

Improved program to incorporate more training and hands-on sessions for users. The AMUG Conference, now in its 31st year, is open to owners and operators of industrial additive manufacturing (3D printing) technologies used for professional purposes.

Conference 61

Conference Additive Manufacturing Groups Milwaukee 61

Shapeways Blog

SEPTEMBER 30, 2019

Research shows that the global market for additive manufacturing will reach $23.33 While the two techniques are similar in nature, additive manufacturing and injection molding are not synonyms. We’ll also reveal which one wins out as being the most effective way to meet robust manufacturing requirements. What is Additive Manufacturing? Then, the additive manufacturing machine reads this CAD data and begins the complex layering solution.

Additive Manufacturing 68

Additive Manufacturing Processes Meeting Plastics 68

3DPrint.com

MAY 10, 2017

3D Printing Education 3d printing certification 3d printing certification programs Additive Manufacturing Fundamentals Certification Additive Manufacturing Technician Certification additive manufacturing training america makes Cuyahoga Community College SMEAs the producer of the RAPID + TCT show currently taking place in Pittsburgh, SME is enjoying a week in the spotlight.

Additive Manufacturing 63

Additive Manufacturing Training America Education 63

3DPrint.com

MARCH 16, 2017

3D Printing Business Metal 3D Printing 3D metal printing safety 3d printing safety additive manufacturing training Additive Manufacturing Users Group AMCC AMUG AMUG 2017 AMUG Conference eos industry partnerships ul UL Additive Manufacturing Competency Center underwriters laboratoriesYou’ve probably heard the saying, “A company is only as great as its employees,” or some variation thereof.

EOS 56

EOS Training Additive Manufacturing Course 56

Stratasys Blog for a 3D World

OCTOBER 5, 2017

Those who attend the nonprofit training center have the opportunity to enroll in either machining or welding for a 16-week accelerated course, and both courses lead to nationally recognized credentials accredited by: The American Welding Society (AWS).

Course 79

Course Training Additive Manufacturing Fortus 79

3DPrint.com

FEBRUARY 14, 2018

Our new 3D Printing in Metal: An Overview of Additive Manufacturing with Metals course will be launching in just a few weeks, and from now through February 23, you can sign up for this innovative, View the entire article via our website.

Additive Manufacturing 70

Additive Manufacturing Metal Course Training 70

3D Printing Industry

JUNE 18, 2018

Following the release of the Additive Manufacturing Safety Certification for powder handling, UL, a global safety science company, and Tooling U-SME, a leading provider of manufacturing training solutions, have finalized an agreement to create a single source for training and professional additive manufacturing certification. With this partnership, the Additive Manufacturing Fundamentals program, previously developed by Tooling […].

Training 66

Training Additive Manufacturing Tools Company 66

Stratasys

FEBRUARY 15, 2017

In the decades since its invention, additive manufacturing (AM), aka 3D printing, has proved to have long-term benefits for businesses that incorporated the technology into their business models and operations. Design for Additive Manufacturing.

Additive Manufacturing 80

Additive Manufacturing Los Angeles Modeling How To 80

3DPrint.com

AUGUST 10, 2017

While EOS is certainly well-known by many big name companies for its expertise in additive manufacturing solutions for both metals and polymers, it has also supported academics and researchers for. View the entire article via our website.

EOS 57

EOS Training Additive Manufacturing Laser Sintering 57

Additive Manufacturing

MAY 15, 2015

May 12, 2015 — UL LLC , a global safety science organization, and the University of Louisville are launching a 3D printing training facility called the UL Additive Manufacturing Competency Center ( UL AMCC ). NORTHBROOK, Ill. and LOUISVILLE, Ky.,

Additive Manufacturing 68

Additive Manufacturing Training Kentucky Chemicals 68

Additive Manufacturing

MAY 3, 2017

(CLEVELAND, May 2, 2017) — Additive manufacturing is a rapidly developing market, and the evolution of this technology is outpacing product design and development. Preparation for the Additive Certifications is supported by eight online classes, which are offered by Tooling U-SME.

Cleveland 52

Cleveland Additive Manufacturing Milwaukee Tools 52

Additive Manufacturing

AUGUST 17, 2017

Added Scientific release first swathe of dates for public training sessions in Additive Manufacturing and 3D Printing. Added Scientific are to open their doors to the public for Additive Manufacturing training sessions in the Autumn of 2017.

Course 56

Course Additive Manufacturing Training Education 56

3D Printing Industry

JUNE 25, 2018

The Innovation and Interaction Centre for Additive Manufacturing will now facilitate training, testing, demonstrations, and presentations for a variety of […]. Business Dr. Matthew Holloway Dr. Michael Todd Henkel HP LPW metal powder production facility LPW technology The Innovation and Interaction Centre for Additive ManufacturingTwo new 3D printing facilities were opened today.

Ireland 70

Ireland Chemicals Consumer Goods Additive Manufacturing 70

3DPrint.com

NOVEMBER 20, 2017

International standards organization ASTM International develops and publishes technical standards for a range of materials, products, systems, services, and industries, including additive. View the entire article via our website.

Additive Manufacturing 58

Additive Manufacturing System Materials Industrial 58

Capturing the Value

APRIL 29, 2014

On 28 April the Bit by Bit team travelled to Nottingham to meet members of the Executive Team at the EPSRC Centre for Innovate Manufacturing in Additive Manufacturing , which is hosted by the Additive Manufacturing and 3D Printing Research Group (3DPRG) at the University of Nottingham. Richard Hague , Director of the Centre and Professor of Innovative Manufacturing; Chris Tuck , Deputy Director; Prof.

Additive Manufacturing 100

Additive Manufacturing Groups Training Research 100

3DPrint.com

JANUARY 31, 2017

Chances are, if your business or company ever considered switching from subtractive to additive manufacturing, you’ve probably heard of Senvol…or more likely, you’ve heard of its. View the entire article via our website.

Exercises 57

Exercises Additive Manufacturing America Tools 57

3DPrint.com

MARCH 12, 2019

His job is to guide, help and train his fellow. 3D Printing Exclusive Interviews Metal 3D Printing additive manufacturing book DMLS DMLS metal 3D printer institutional reticence metal printing organizational designDave Dietrich is an Engineering Fellow at Honeywell Aerospace. There he was involved with the systems and defense firm’s 3D printing effort. View the entire article via our website.

Training 73

Training Aerospace Additive Manufacturing System 73

Additive Manufacturing

OCTOBER 9, 2019

The initiative aims to accelerate the broad use of additive manufacturing (AM) in various industries through integrated research and development initiatives. The new Additive Manufacturing Institute is aimed at cross-disciplinary AM research.

Additive Manufacturing 60

Additive Manufacturing Switzerland Germany Arcam 60

Additive Manufacturing

AUGUST 17, 2015

August 17, 2015 – The Additive Manufacturing Users Group ( AMUG ) today announced that its 28 th annual users group conference will be located in St. Everywhere you turn, there is something interesting: artifacts, blueprints, architectural details and historic train cars.

Groups 93

Groups Conference Additive Manufacturing Missouri 93

3DPrint.com

SEPTEMBER 25, 2019

A cross-industry group has come together recently in an effort to upgrade trains with 3D printed parts. Currently, components being fabricated via additive manufacturing technology–rather than. 3D Printing 3D printed train components Fortus 450mc Production 3D printer industrial 3d printing Stratasys FDM 3D printing ULTEM™ 9085 resinView the entire article via our website.

Fortus 72

Fortus Training Groups Additive Manufacturing 72

Additive Manufacturing

JUNE 27, 2019

June 27, 2019 – The Additive Manufacturing Users Group ( AMUG ) will install its 2019-2020 board on July 1, 2019. Jamie Cone of BD will serve a third term as vice-president, and Leslie Frost of GE Additive will serve a second term as secretary. MILWAUKEE, WISC.,

Milwaukee 52

Milwaukee Groups Illinois Additive Manufacturing 52

3D Printing Industry

SEPTEMBER 20, 2018

Design for Additive Manfuacturing (DfAM) training is explored at ETH Zürich. Carbon‘s Continuous Liquid Interface Production (CLIP) 3D printed parts are put to the test. The National Institute of Standards and Technology (NIST) examines the effect of defects on the surface of 3D printed components. And Lawrence Livermore National Laboratory (LLNL) researchers investigate the potential […].

Additive Manufacturing 83

Additive Manufacturing Processes Research Training 83

3D Printing Industry

JUNE 21, 2018

The Conference on Advancing Analysis and Simulation in Engineering (CAASE) took place June 5th-7th with more than 500 industry professionals assembling in Cleveland for technical presentations, workshops, training courses, and an exhibit. The event catered to the broader engineering simulation community with four key themes across physical and biological systems, simulation governance and democratization, business […].

Cleveland 84

Cleveland Software Simulation Additive Manufacturing 84

Additive Manufacturing

JANUARY 17, 2018

Product development supplier buys world’s largest powderbed additive system to expand reach in multiple industries. January 18, 2017) — Today Roush is the first service supplier in North America with the largest metal additive manufacturing system of its kind.

Additive Manufacturing 52

Additive Manufacturing North America Michigan America 52

Additive Manufacturing

APRIL 29, 2019

EASTEC is one of four regional manufacturing trade shows, produced by SME and AMT , in support of industries such as aerospace, medical devices, automotive, industrial equipment and defense on the east coast. Now in its 35th year, this year’s EASTEC will showcase foundational manufacturing to breakthrough technologies associated with artificial intelligence, additive manufacturing, robotics, automation, and Big Data. About Additive Manufacturing Seminar Series.

Additive Manufacturing 61

Additive Manufacturing Case Study Massachusetts Conference 61

Additive Manufacturing

MARCH 31, 2017

March 30, 2017- 15 newly-proposed standards from ASTM International ’s committee on additive manufacturing ( F42 ) will help companies in that industry comply with a new checklist for accreditation by the National Aerospace and Defense Contractors Accreditation Program ( NADCAP ).

Additive Manufacturing 72

Additive Manufacturing Industrial Industry Meeting 72

Additive Manufacturing

MAY 9, 2018

has entered into a partnership with Québec Industrial Research Centre ( CRIQ ) to offer, for the first time in Canada, three days of intensive training on design for additive manufacturing (DfAM). Featured News Additive Manufacturing CRIQ Denis Hardy design for additive DfAM Inc.

Canada 56

Canada Guidelines Course Siemens 56

Design 2 Part News

DECEMBER 20, 2017

“ITAMCO Ramps up Additive Manufacturing with New EOS Printer” Featured in Design-2-Part Magazine. The fast ramp-up is partially due to the experience the ITAMCO team gained while contributing to the development of additive manufacturing software.

EOS 56

EOS Additive Manufacturing Indiana North America 56

3DPrint.com

JULY 6, 2017

Back in May, SME announced the first national Additive Manufacturing Certifications, as its workforce development arm, Tooling U-SME, sought to provide a validation of knowledge in additive. View the entire article via our website.

Additive Manufacturing 62

Additive Manufacturing Tools America Training 62

Stratasys Blog for a 3D World

JUNE 18, 2018

Additive manufacturing has become a useful and important technology across many industries. Unfortunately, there is a widening gap between additive manufacturing (AM) technology and the number of workers who have the necessary skills needed to implement it.

Additive Manufacturing 84

Additive Manufacturing Iowa Education Stratasys 84

Additive Manufacturing

OCTOBER 5, 2017

5, 2018 – The Additive Manufacturing Users Group ( AMUG ) today announced that online registration is now available for its 2018 Education & Training Conference , which will be held in St. About Additive Manufacturing Users Group (AMUG).

St. Louis 52

St. Louis Conference Missouri Additive Manufacturing 52

3D Printing Industry

NOVEMBER 16, 2016

Leading additive manufacturing supplier Optomec are hosting a training class this week at Autodesk University in Las Vegas. 3D Printing 3d print Additive manufacturing autodesk autodesk university dave gleason las vegas optomec rob corddry The venetianThe session is titled "Autodesk is to.

Optomec 86

Optomec Autodesk Las Vegas Training 86

Additive Manufacturing

SEPTEMBER 16, 2019

Stratasys consulting firm unveils “Think Additively” program, going beyond Design for Additive Manufacturing (DfAM) and connecting 3D printing to business transformation initiatives. Featured News additive manufacturing consultancy Blueprint Kunal Mehta Think Additively

South America 52

South America North America Stratasys Africa 52

Additive Manufacturing

APRIL 30, 2018

FORT WORTH, Texas, April 25, 2018) — SME , working with the Florida Institute of Technology ’s Michael Grieves , PhD , and other industry partners, has announced the beta launch of the Independent Technical Evaluation of Additive Manufacturing Consortium ( ITEAM ) evaluation platform.

Fort Worth 56

Fort Worth Additive Manufacturing Texas Resources 56