Additive Manufacturing Strategies Summit Focused on the Future of 3D Printing in Medicine and Dentistry

3DPrint.com

I had the privilege of attending a two-day Future of 3D Printing in Medicine and Dentistry conference on January 22nd and 23rd in Washington, D.C. The Additive. 3D Printing Business Medical 3D Printing 3d printed medical devices 3d printing in medicine 3d systems Additive Manufacturing Symposium Arfona dental 3d printing Digital Industrialist hp inc.

Additive Manufacturing Roadmap

Wohlers Talk

The National Center for Manufacturing Sciences led the development of a roadmap for the additive manufacturing (AM) industry in 1998. and it led to a report titled The Road to Manufacturing. One cause is the recent launch of the ASTM International Committee F42 on Additive Manufacturing, an effort concentrating on the development of industry standards. Its purpose: to develop a roadmap for research in additive manufacturing for the next 10-12 years.

U.S. Naval Research Laboratory Acquires Concept Laser M2 Cusing Machine, Strengthens Focus on Metal Additive Manufacturing

3DPrint.com

Headquartered in Washington, D.C., 3D Printers 3D Printing Aerospace 3D Printing Business Metal 3D Printing 3d metal printing 3d print research and development 3d printing navy 3D-printed stainless steel additive manufacturing additive manufacturing metal powders concept laser Concept Laser M2 Cusing lasercusing military 3d printing Mlab cusing Navy 3d printing research research and development stainless steel stainless steel 3d printing united states navy

Additive Manufacturing Partnership Meeting

RPM Tools

USPTO to Host Additive Manufacturing Partnership Meeting Meeting will serve as a forum for sharing ideas and insights between stakeholders and the USPTO Washington  The U.S. Department of Commerces United States Patent and Trademark Office (USPTO) will host an Additive Manufacturing Partnership Meeting on Wednesday, April 9, 2014 at the USPTO headquarters in Alexandria, Virginia.

Pitt Engineers Receive $500,000 Award From NASA to Develop Materials Model for Simulating Microstructure Evolution During Additive Manufacturing

Additive Manufacturing

PITTSBURGH (December 12, 2016) … Additive manufacturing (AM) researchers at the University of Pittsburgh’s Swanson School of Engineering and simulation software company ANSYS, Inc. Featured News Albert To ANSYS ANSYS Additive Manufacturing Research Laboratory David Conover Inc.

Additive Manufacturing for Aerospace: FAA-Approved Air Duct for ‘Flying Eye Hospital’ Produced in Just Days

Stratasys Blog for a 3D World

SIE chose to use additive manufacturing to create the customized air duct. Why Additive Manufacturing is Flying High. an emphasis on customization and small-scale production which is often needed for aerospace manufacturing. - manufacturing sector.

Boeing and Thermwood Partnership to Demonstrate New 3D Printing Technology

Additive Manufacturing

Boeing and Thermwood Corporation have employed additive manufacturing technology to produce a large, single-piece tool for the 777X program. The project is demonstrating that additive manufacturing is ready to produce production quality tooling for the aerospace industry.

NCDMM to Host Elite Students from the National Defense University’s Dwight D. Eisenhower School for National Security & Resource Strategy for Week-long Program Focused on Additive Manufacturing (AM)

Additive Manufacturing

The National Center for Defense Manufacturing and Machining ( NCDMM ) proudly announces that for the 13th consecutive year, it will host the Manufacturing Industry Study Group from the National Defense University’s Dwight D. The Study Group will visit the Northeast Ohio and Western Pennsylvania regions for a week-long, additive manufacturing (AM) focused, field-study trip designed to complement their current in-class studies. Based in Washington, D.C.,

Concept Laser GmbH-A World First: Additively Manufactured Titanium Components Now Onboard the Airbus A350 XWB

Additive Manufacturing

A connecting element used in the Airbus A350 XWB made it to the final round of the “2014 German Industry Innovation Award” Additive manufacturing in aircraft construction is gaining ground. Additive layer manufacturing allows designers to come up with new structures.

LENS Technology Used in New One-Step Process for 3D Printing Multimaterial Structures

3DPrint.com

Laser engineering net shaping (LENS), a patented, hybrid additive manufacturing technology developed by Optomec, is most often used for high-value metal 3D printing. It can also be added onto. View the entire article via our website.

2018 U.S. Military budget includes support for 3D printing

3D Printing Industry

military budget for 2018 includes support for an increased use of 3D printing and additive manufacturing. Every year Washington must authorize appropriations. Aerospace Additive manufacturing DARPA Department of Defense Emerging Threats and CapabilitiesThe proposed U.S.

3D Printing Technology Plays Major Role in White House’s Smart Manufacturing Innovation Institute Competition

3DPrint.com

This week, emerging technologies and breakthrough manufacturing techniques, such as 3D printing, are being thrust forth into the spotlight in Washington, D.C., as the Obama Administration is. View the entire article via our website.

3D Printing: The Stories We Missed -- February 25, 2017

3DPrint.com

Fabrisonic has received another patent for Ultrasonic Additive Manufacturing. disney Fabrisonic makielab Nanogrande stereolithography threeding ultimaker ultrasonic additive manufacturing Washington Award‘Design your own 3D printed dolls’ startup MakieLab has been acquired by Disney. Cura, Ultimaker’s open. View the entire article via our website.

On-Demand 3D Printing to Impact Navy Fleets in the Near Future

3DPrint.com

3D Design 3D Printing 3D printed military components 3D printing exhibition 3d printing navy Department of the Navy Additive Manufacturing Showcase exhibition navy Navy fleets Navy Supply Command on-demand 3D printing United States military united states navy University of Mary Washington us navy3D printing technology has various militaries across the world eagerly standing at attention, many of which are researching and aiding in future technological developments.

Carbon Introduces Production-Scale 3D Printing Materials Program for Large Manufacturers

Additive Manufacturing

This production volume materials approach will allow us to ensure that our partners like adidas, which will be printing thousands or millions of parts, can do so economically compared to other manufacturing methods such as injection molding,” said Carbon CEO and Co-founder Dr. Joseph M.

US Navy orders its first powder-bed metal 3D printer from Concept Laser after GE acquisition

3D Printing Industry

The US Naval Research Laboratory (NRL) in Washington D.C. is now equipped with an M2 Cusing machine and supporting systems from German additive manufacturing company. 3DP Applications Acoustics division boats Charles Rohde Concept Laser defense John Murray laser melting M2 cusing metal additive manufacturing Naval Research Laboratory navy NRL powder bed ship ships US Navy

Sliced 3D printing news LEGO, PostProcess Technologies, DOBOT, Arcam

3D Printing Industry

These questions and more from metal additive manufacturing to desktop 3D printing are answered in this edition of […]. HP IKEA Jerry Liu K-Tech Lego Manufacturing Technology Centre Martin Gambling Mosquitoes MTC Nitin Gandhi orbital composites postprocess technologies Prototyping Solutions Queensland College of Art Real Play Coalition Sam Canning Shapecrunch Sliced Stanley Abkowitz TekPro Group TI-6AL-4V titanium Traxer Unilever University of Washington

Arcam 83

ASTM International to Host Delegation of 3D Printing Experts from Singapore

Additive Manufacturing

November 7, 2016— ASTM International will host a delegation of additive manufacturing professionals from Singapore, Nov. The delegation will visit Washington, D.C., As part of the additive manufacturing program, the delegation will visit: ASTM’s D.C.

Renishaw – Making Dentistry Digital

Additive Manufacturing

One of the most renowned myths about America’s first president, George Washington, is that his dentures were made from wood. In fact, Washington had several sets of full and partial dentures, all of which were constructed from human, cow and horse teeth, lead, copper and silver.

Rural, and making it: Bringing manufacturing to small towns

Design 2 Part News

He charged companies whatever he wanted as a freelance industrial designer, but he left it all to become part of a rural manufacturing renaissance. He and his business partner set out to create a product and manufacture it domestically, with no outsourcing to other countries.

Stratasys Direct Manufacturing – 3D Printing Gives Flight to Humanitarian Efforts

Additive Manufacturing

by Stratasys Direct Manufacturing. Stratasys Direct Manufacturing teamed with Structural Integrity Engineering to further efforts on the latest Flying Eye Hospital for Orbis. Flying Eye Hospital (Photo courtesy of Stratasys Direct Manufacturing). manufacturing sector.

NASA Challenges Designers to Construct Habitat for Deep Space Exploration

Additive Manufacturing

WASHINGTON, May 16, 2015 /PRNewswire-USNewswire/ — NASA and the National Additive Manufacturing Innovation Institute , known as America Makes , are holding a new $2.25

The U.S. Naval Research Laboratory Adds 3D Metal Printing by Concept Laser to Enhance Research and Development Capabilities

Additive Manufacturing

This is NRL’s first 3D metal printer that is laser powder-bed based and will strengthen their focus on additive manufacturing. Additionally, they will be using CL WRX Parameter 2.0 Naval Research Laboratory is bolstering their focus on metal additive manufacturing.

NASA-Sparks Fly as NASA Pushes the Limits of 3-D Printing Technology

Additive Manufacturing

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Alabama. Headquarters, Washington.

Is it Time to Think Differently about 3D Printing?

Design 2 Part News

factor is still strong, but engineers and designers are thinking about 3D printing in new ways, from evaluating its business value to learning the ropes of designing for additive manufacturing. . Photo courtesy of Stratasys Direct Manufacturing.

Atlantic Council warns of cybersecurity risks of 3D printing in aviation

3D Printing Industry

Like many industries, aviation has readily adopted additive manufacturing and 3D technologies in aircraft production, maintenance and training. As Washington D.C. Aviation is responsible for 4 billion journeys per year, and the transportation of 55.7 million tons of cargo across the world. But this enthusiasm and for new technologies comes at a cost. think-tank the […].

3D printing comes of age in U.S. manufacturing…

Design 2 Part News

manufacturing, says PwC survey” By Norbert Sparrow, Plastics Today. More than two-thirds of manufacturers use 3D printing. Manufacturers in the United States have moved past “experimentation” and are now firmly committed to additive manufacturing, aka 3D printing (3DP). industrial manufacturing ecosystem. manufacturers conducted in October 2015, and it is the second time that PwC has analyzed the adoption of 3D printing by U.S. manufacturers.

You Don’t Want to Miss the 2nd Annual AM for Government 2014 Conference

3D Printing Industry

December 8th to the 10th in Washington DC the 2nd Annual Additive Manufacturing for Government 2014 conference will gather large business leaders, government agencies, entrepreneurs and DoD representatives to discuss the future of additive manufacturing and what it means for US industry.

3D Systems' Cube 3D Printer receives American Technology Award - TWI

3D Rapid Pro

The Termans were presented last night at a gala dinner in Washington D.C. 3d modeling 3d print 3d printer 3D Systems additive manufacturing CAD cube cubify dimension FDM fortus hobby OBJET stratasys

DIMENSIONEXT: The Winners Of The Stratasys Design Competition.

Dimensionext

Stratasys, one of the two biggest corporations in the realm of industrial additive manufacturing and home 3D printing has announced the victors of their tenth annual Extreme Redesign 3D Printing Challenge. Pages. SECTOR NEWS. REPORTS. REVIEWS. SEARCH. PRINTEREST. ABOUT.

Will Fab@Home Succeed?

Wohlers Talk

Two of the assembled machines are at the University of Washington and one is in Innsbruck, Austria. Additive Manufacturing Education Entertainment Review Fab@Home has been receiving a lot of attention lately. What is it? Fab@Home is an open source 3D printer development at Cornell University. Hod Lipson, assistant professor of mechanical and aerospace engineering, and Evan Malone, a PhD candidate in Lipsons Computational Synthesis Lab, are working together on the project.

Put Your Pedal to the 3D Printed Metal

Design 2 Part News

Race Car Company Solves Product Problem by Working with Metal Components Manufacturer that Invested in New 3D Metal Printer Technology. If we were to have used traditional manufacturing, it would have involved many more steps and a lot more cost,” said MTI’s Cosmer. “So

3D Printed Rocket Engine Space Race Continues

DIY 3D Printing

They write: “Building the first full-scale, copper rocket part with additive manufacturing is a milestone for aerospace 3-D printing,” said Steve Jurczyk, associate administrator for the Space Technology Mission Directorate at NASA Headquarters in Washington.

Stratasys Heads to the Hill to Demonstrate the New Shape of Manufacturing

Stratasys Blog for a 3D World

Jon Cobb (left), vice president of corporate affairs at Stratasys, discusses how 3D printing is changing manufacturing competitiveness.

Hydrogels & 3D Printing Used to Produce Programmable Biocapsules

3D Printing Industry

The fact that we are really just at the beginning of understanding what can be achieved through digital additive manufacturing is demonstrated by the fact that a collaboration involving different approaches from the industrial manufacturing sector of 3D printing can yield impressive results in the realm of bioengineering. By Davide Sher.

AMUG Hosts Debut of Stratasys J750, Industry Innovators Honored

Stratasys Blog for a 3D World

Each year, the Additive Manufacturing Users Group (AMUG) provides thought-provoking keynote speakers, workshops and conference sessions that aim to stimulate, inspire and educate the additive manufacturing community on the latest applications and technology.

A Few Flashforge 3D Printer Tips

Fabbaloo

The folks at the University of Washington’s Mechanical Engineering Department’s Solheim Additive Manufacturing Laboratory apparently like fixing their Flashforge 3D printers.

NASA 3-D Prints First Full-Scale Copper Rocket Engine Part

Additive Manufacturing

Building the first full-scale, copper rocket part with additive manufacturing is a milestone for aerospace 3-D printing,” said Steve Jurczyk, associate administrator for the Space Technology Mission Directorate at NASA Headquarters in Washington. by NASA.

The Week in 3D Printing: Holograms, Upcycling, No-Electricity Electronics, and Mini Medicals

Shapeways Blog

Learn more at TechCrunch , and real the whole paper, One-step volumetric additive manufacturing of complex polymer structures, here.

NAM/IndustryWeek Survey Shows Manufacturers’ Optimism…

Design 2 Part News

“NAM/IndustryWeek Survey Shows Manufacturers’ Optimism at Odds with Deep Frustration Regarding Washington” By Matthew Lavoie, National Association of Manufacturers. While manufacturers continue to be mostly upbeat, their optimism can be tied to confidence in their own workforce and ability to grow their business in the face of increasing regulatory burdens and rising health care costs. Manufacturing News government legislation Made in America Manufacturin