How the Auto Industry Uses FDM 3D Printed Jigs, Gauges, and Fixtures

Fisher/Unitech

The automotive industry is finding that the traditional way of manufacturing tools for the production floor can be made better by implementing 3D printing. Higher demands on production and the need to cut costs without quality are driving forces for the implementation of 3D printing.

Your Questions about FDM Nylon12 Carbon Fiber Material Answered

Stratasys Blog for a 3D World

Sam Green: Zehavit, so summarize for us what is the new Nylon12 Carbon Fiber material? Zehavit Reisin: Well, Sam, this is our first high performance FDM composite material containing 35% chopped carbon fiber by weight. SG: Can you give us a typical industry use case example?

Utah 78

Trending Sources

3D Printed Drones are Making Drones More Affordable

Shapeways Blog

Kespry provides drone-based aerial intelligence for industrial use; drone parts 3D printed with Shapeways. Sometimes referred to as unmanned aerial vehicles (UAVs), drones have been in use by the United States military since the turn of the century. A Multitude of Materials.

Will 3D Printing be the demise of Plastic Injection Molding?

Leslie's Blog

Some observers of the plastics manufacturing industry, especially those with a vested interest, would like to have you believe that 3D printing is going to be the demise of injection molding. By Denny Scher.

3D Printing Takes Off

3D Perspectives

The medical industry uses the technique with living cells to create tissues and, perhaps one day, organs. AM then uses several binding techniques, including selective laser melting, direct metal laser sintering and laser deposition technology. Written by Catherine Bolgar.

What is solder and how does it work?

3D Printing Hub

Solder is the material that provides a mechanical as well as an electrical joint between components and the circuit board on which the components are being assembled. In order to achieve these two types of joints, the solder should be of a robust material and be a good conductor of electricity at the same time. It must also be easily available, easy to use, and convenient to store. The materials used to make solder allow it to be produced in a wire form.

Best Dual Extruder 3D Printers

3D Printing Hub

With dual extruder 3D printers, you get to print with two colors and create complex objects that need support materials. These are the products that send the message that dual extruder 3D printers can be extremely fun and easy to use too. Easy to set up and use. Easy to use.

Solving Aerospace Manufacturing’s Complex Riddle

Design 2 Part News

But today, jet makers are working to solve an engineering and manufacturing riddle that goes something like this: “How do you achieve the highest quality requirements when aircraft materials, parts, and production processes are now more complex, and more challenging, than ever?”.

7 Best RC Airplanes Plus Beginner’s Guide

3D Printing Hub

And every crash you have using the simulator is going to be one less mistake you make outdoors. Transmitter; the device the pilot uses to fly and control the plane. There are four basic controls of a remote-controlled airplane and include: Ailerons: used to control roll (side to side).

3D Printers for Sale

3D Printing Hub

The vast majority of hobbyists use FDM printers. The 3D printer heads extrude thermoplastic materials straight onto the print bed, one layer at a time. Some 3D parts need water-soluble support materials during the printing process. How easy is this printer to use?

Making a Place for Everything

Design 2 Part News

Today, Bull Metal offers fabrication services that include custom sheet metal, rigid wire, and light gauge tubing products, as well as services involving other materials. Sheet metals used in fabrication include cold rolled steel (CRS), aluminum, stainless steel, and galvanized steel.

U.S. Manufacturing is Building up a Head of Steam

Design 2 Part News

This country was founded on manufacturing, and I think it continues to be an important part of our economy, and I don’t think that being a service-driven industry or economy is good in the long run for our country.”. Industrial Construction on the Upswing.