Art Without Restrictions — Noell Oszvald’s 3D-Printed Sculpture Experiments with Shadows

i.materialise

Inspired by Danny’s art and encouraged to bring her 3D sculpting projects to the next level with 3D printing, Noell turned to i.materialise and its services, technologies, and materials when she decided to take her first shot at 3D printing her work.

Art 60

“Twin” Exhibits Seek to Explore the Artistic Value of “Materialization” Processes

3D Printing Industry

As 3D printing technologies open up to more people than ever before, the entire industry looks to artists to try to visualize its possible future applications and the way they can modify the creative process. 3D Printing Art & Sculpture Industry news By Davide Sher.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Art and 3D Printing: Meet Curious Artist Koenraad Van Daele

i.materialise

3D printing is a very broad concept that includes many different technologies, materials and even 3D design software. As a longtime friend of i.materialise, this Belgian artist is a good example of a curious mind experimenting with diverse 3D printing materials and sizes.

Art 76

Laser Institute’s LAM Workshop Explores State of the Art in Additive Manufacturing

3D Printer

Lasers are an integral part of many 3D Printing processes, making it a natural fit that the Laser Institute of America [LIA] annually produces the Laser Additive Manufacturing [LAM] Workshop.

Korean Architect Se Yoon Park Designs Stunning 3D Printed Trees for His Art Installation

i.materialise

Armed with the knowledge of 3D modeling and 3D printing, a background in architecture, and the will to liberate his creative mind, Korean designer Se Yoon Park has created a stunning art installation made up of 3D-printed trees. The 3D Printing Process behind the Art.

Art 78

Mani Zamani’s 3D Printed Toy Art Has Landed

3D Printing Industry

Is it a toy or a work of art? Does a work of art become ‘less than art’ when it is reproduced and printed using a different material? Does an art object become a toy through the process of miniaturization and reproduction? If that is what life is, then how is art any different?… … The original post Mani Zamani’s 3D Printed Toy Art Has Landed appeared first on 3D Printing Industry. By Andrew Wheeler.

Art 87

Engineering is Art: Q&A with Artist and Engineer Shane McKenna

The Solidworks Blog

However, you might need to dig a little deeper to become familiar with his other passion: Art. From furniture and mantles to decorative art and abstract works, McKenna uses SOLIDWORKS to bring many different creative projects to life.

Art 91

Korean Architect Se Yoon Park Designs Stunning 3D Printed Trees for His Art Installation

i.materialise

Armed with the knowledge of 3D modeling and 3D printing, a background in architecture, and the will to liberate his creative mind, Korean designer Se Yoon Park has created a stunning art installation made up of 3D-printed trees. The 3D Printing Process behind the Art.

Art 106

Irish Digital Art Student Brings a Sea Monster to Life – With 3D Printing

i.materialise

Amy Doran is a graduate of 3D Design, Model Making and Digital Art from the National Film School at I.A.D.T I love learning about new materials and practices, both physical and digital and this led me to experiment with 3D printing.”. Sea monsters exist – at least in 3D-printed form.

Art 103

How to Use the New Gray Smooth Detail Resin Material from i.materialise

3DPrint.com

With ten of the most advanced and common 3D printing technologies, twenty different 3D printing material options and over a hundred possible colors and surface finish combinations, Belgian 3D. 3D printed art 3D Printing 3D Printing Materials 3d printing material guidelines 3d printing materials Digital Light Processing dlp i.materialise light-cured resin materials materialise Smooth Detail Resin

The Bronze Age Meets the Digital Age in the Art of Tim Belliveau

Shapeways Blog

We judge our success on how much control we have over the material,” says Tim Belliveau , an artist who has been blowing glass for more than a decade. Belliveau started to rethink his own process, which had become costly and time-consuming. ‘Artifacts’ 2018.

Glass 81

The Art of Simulation Data Management

The Solidworks Blog

However, I have always wondered how companies that adopt aggressive design simulation processes successfully manage the resulting data. If one batch of one alloy in one part was found to be faulty, for example, a search could show if the bad material had found its way into other spacecraft.

Data 95

Our Best Material Finish Ever

Shapeways Blog

Today, Shapeways is proud to debut our newest and highest quality nylon material offering: our new Premium Strong & Flexible nylon plastic. We’re excited to introduce this upscale finish to our Strong & Flexible nylon, our most popular and versatile material.

3D Pixel Art and Printing Collide Creating GrabCAD Voxel Print

Stratasys Blog for a 3D World

No longer does thinking, designing, fabricating need to happen in one dimension, color, texture or material. Traditional manufacturing is centered on fabricating with homogeneous materials, but today, with additive technology, we can think about materials in a completely different way.

Art 87

Generative 3d modeling for 3d printing workshop by parametric | art at Budapest 3D Printing Days

Algorithmic Art

Computational geometry describes complex 3-dimensional forms and aesthetic processes in the form of mathematical algorithms as executable code. parametric | art. parametric | art. parametric | art. parametric | art. parametric | art. parametric | art.

Art 90

3D Printing Emotions? Try Turning Your Love Story Into Art!

Stratasys Blog for a 3D World

When they get familiarized with the additive manufacturing process and the ability to create objects layer by layer, it will open up their mind to new possibilities in the creative process. People get very excited with technology and art and this will only add to that excitement.”.

Art 111

The Art of Time: Prototyping the Future of Watchmaking

Shapeways Blog

The S-Town podcast recently introduced its millions of listeners to the word horology, or the art of measuring time. The holy grail of watchmaking,” he has written , ”is to seamlessly mesh engineering and art.”. How are you using Shapeways and 3D printing in your prototyping process?

Art 75

Robert Welch Designs Turns Silverware into an Art Form With SOLIDWORKS

The Solidworks Blog

There are some, however, who have turned silverware into an art form, making us sit up and pay attention. New product, new materials, new CAD. The program accurately replicates the real-life stress of materials used in the design of everything the company makes.

Art 113

Magical 3D-Printed Shadow Art from Drzach & Suchy: 3D Printing From a Different Angle

Materialise

Drzach & Suchy are a designer duo like no other: Drzach is an architect who combines art and design, while Suchy is a cryptographer and a software engineer who experiments with holograms and various techniques and materials. 3D Printing Art and Design

Art 90

3D printing with flexible materials – FlexPLA tests

Algorithmic Art

parametric | art. I’ve already written about the sustainability of 3D printing with biodegradable materials like PLA or 3D printing with wood, but there is a huge amount of articles based on the eco-friendly 3D printing materials researches. parametric | art.

How to eliminate 3D printing post processing steps

Leslie's Blog

Post processing steps, such as painting, polishing, assembly and others, have been a sticking point for many engineers that use 3D printing. Despite recent 3D printer introductions, this part of the prototyping process is still time intensive and the supplies expensive.

Device Art: 3D Printing and Interactive Electronics With Pamela Liou

Shapeways Blog

In her Device Art course at Parsons School of Design, students learn the basics of electronic circuitry design and physical computing so they can create interactive art projects. We spoke to Pamela about the Device Art class and how students are using 3D printing for their projects.

Art 70

DIMENSIONEXT: The Art Of 3D Printing: From STEM to STEAM.

Dimensionext

The Art Of 3D Printing: From STEM to STEAM Education. The Art Of 3D Printing: From STEM to STEAM Education. The Arts. All religions, arts and sciences are branches of the same tree. Art and design sits at the same table as STEM.” Pages. SECTOR NEWS. REPORTS.

Art 83

Magical 3D Printed Shadow Art from Drzach & Suchy: 3D Printing From a Different Angle

i.materialise

Drzach & Suchy are a designer duo like no other: Drzach is an architect who combines art and design, while Suchy is a cryptographer and a software engineer who experiments with holograms and various techniques and materials.

Art 88

Remixing Ancient Art at Samson Young’s Venice Biennale Exhibition ‘Songs for Disaster Relief’

Shapeways Blog

Wenman, a multimedia artist and 3D fabrication consultant , began his design process by 3D scanning the plaster cast of the Nike of Samothrace made by the Louvre’s atelier. In fact, the merging of these roles impacts not only the use of 3D printing, but also the expressive limits of art.

Art 86

MAKING A DIFFERENCE / A DIFFERENCE IN MAKING Opens this April at BOZAR Centre for Fine Arts

Materialise

All these questions will be explored at MAKING A DIFFERENCE / A DIFFERENCE IN MAKING , from April 24 th to June 7 th at the internationally-renowned BOZAR Centre for Fine Arts in Brussels. Photo by Factum Arte and Fondazioni Giorgio Cini Onlus. Manufacturer: Factum Arte.

Art 87

Meet Veronika Schmid, the Designer Behind the Art World’s 3D Printed Masterpieces

Shapeways Blog

She’s also the unseen hand behind many prominent works of contemporary art. Veronika was kind enough to share her perspective on 3D printing in the art world. Usually it’s ideas that get developed during the process. The metalization process used on a Frank Stella piece.

Art 80

Exploring 3D Printing in Furniture Design: Jon Christie’s State-of-the-Art Furniture

i.materialise

Jon’s state of the art furniture is both exciting and elegant in equal measures. His table and chair designs blend traditional craftsmanship, modernist design, and state-of-the-art 3D printing technology.

Art 87

An Experiment in Ceramic Art - HIFire RESolutions: 3D Printing in Clay

3D Systems

An Experiment in Ceramic Art - HIFire RESolutions: 3D Printing in Clay Friday, April 3, 2015 - 09:55 . We have been pushing the boundaries of what defines art in the attempt to discover if art can be made with limited technical knowledge and skill.

It’s Delicious: The Art of 3D Printing Food

PrintSpace

This gives them a unique advantage from the material standpoint; just as innovative filaments drive a fair portion of the traditional 3D printing industry, the food printing industry is going to be driven by inventive ways of printing food. 3D printing food? Yup, that’s right.

Food 71

San Francisco Museum of Modern Art Acquires ‘Gemini’ Chaise with Stratasys 3D Printed Acoustic Skin

Additive Manufacturing

The purchase follows a series of Stratasys 3D printed art piece acquisitions by landmark museums, including MoMA New York, Centre Pompidou Paris, Science Museum London, Museum of Fine Arts, Boston (MFA) and MAK Vienna.

Neri Oxman’s 3D Printed Photosynthetic Wearables Shine New Light on Art, Design, Science & Technology at TED2015

Stratasys Blog for a 3D World

Oxman unveiled Mushtari, an artwork 3D printed by Stratasys and the world’s first wearable to combine multi-material additive manufacturing and synthetic biology. 3D printed on the Stratasys Objet500 Connex3 Color Multi-Material 3D Production System, Mushtari is filled with luminescent liquid.

Art 114

Quintus Technologies HIP Expands Accurate Brazing’s Thermal Processing Capabilities

Additive Manufacturing

The press, model QIH 122 M URC®, is equipped with Quintus’ proprietary uniform rapid cooling (URC), a feature that improves material properties of parts designed for mission-critical applications, increasingly produced in the vibrant additive manufacturing (AM) environment. “We

Customized 3D Printed Headset/Handset Kit for Unique Interactive Art Exhibit Delivered Quickly and Affordably

Stratasys Blog for a 3D World

University art departments have been among the early adopters of 3D printing. For Washington DC-based artist, Emily Biondo, 3D printing provided a streamlined production process and customized solutions for her latest interactive art exhibit.

Art 113

Guide to Unusual 3D Printing Materials

Sculpteo

If you’re interested in 3D printing and our manufacturing methods, you probably know about the most widely used 3D printing materials. However, these materials are just the tip of the iceburg, 3D printing has many other hidden surprises. Field of Use: Art. Organic Material.

Renishaw – Enhancing the Additive Manufacturing Process Chain

Additive Manufacturing

Available to users on premise or on-cloud, and accessible via a single user interface, it enables the creation of ‘social enterprises’ where collaboration in the product innovation process becomes simpler and more efficient. By Renishaw | Case Studies.

Burloak Technologies to Open State-of-the-Art Additive Manufacturing Center

Additive Manufacturing

The state-of-the-art 40,000 square foot facility will open in September 2018 and is expected to be fully operational in the first quarter of 2019 as the Company’s existing operations are transferred.

SUPERLORA: A 3D Printed Jewelry Brand at the Intersection of Art and Science

i.materialise

According to Ariadne, art and science actually share surprising similarities, however much they might seem like polar opposites in popular imagination. Science and art may appear to be two conflicting subjects, however, they have fundamental similarities.

3D Printing News Briefs: April 14, 2017

3DPrint.com

laser engraving logistics makerbot replicator massachusetts Methods Machine Tools mou non-profit Ohio partnership pla filament post processing Pro-Am tournament prototyping RAPID + TCT RAPID 2017 Renca sla 3d printing Tokyo uae united arab emiratesIn today’s 3D Printing News Briefs, we’ll take care of a little business first, then move on to a contest, an upcoming event, and a really cool 3D printed trophy. The Dubai Future. View the entire article via our website.

Nick Ervinck’s Latest 3D Printed Works Star in Four Upcoming Exhibits in Europe and the US

3DPrint.com

Understanding what kind of structures it will be possible to produce in the future with generative software and multi-material 3D printing processes is what engineers need. 3D Design 3D printed art 3D Printing 3d art 3d print art exhibit art exhibit belgium Nick Ervinck Northern Arizona University Art Museum

Artists and Makers Say Goodbye to Sanding & Hello to Glossy 3D Prints with PolySmooth & Polysher

3DPrint.com

When we look at works of art, it’s rare that we consider how many hours—often challenging and painstaking ones—went into making something so exclusive. 3D Design 3D printed art 3D Printing 3D Printing Materials 3D model finishes 3d model finishing 3d print finishing 3D printing finishing 3D printing polisher 3D printing post processing kickstarter polymaker Polysher PolySmooth striation reduction

Sand 59

LulzBot Tutorial Shows Techniques for Polishing Parts Made Using Metallic Filaments

3DPrint.com

In general most plastic parts printed on a FDM 3D printer will require some sort of post processing due to the natural striation of building up a part layer by layer, or to eliminate threads and. 3D printed art 3D Printing 3D Printing Materials Aleph objects Cura dremel lulzbot lulzbot mini lulzbot taz 5 metal filament post processing tutorials

DIMENSIONEXT: New Post Processing for 3DP

Dimensionext

New Post Processing for 3DP. New Post Processing for FDM & Polyjet. Yet fun, like art, can be as much about the performance as the end product. Labels: 3D Printing , Post processing. Pages. SECTOR NEWS. REPORTS. REVIEWS. SEARCH. PRINTEREST. ABOUT.