Unseen Art: 3D Printing Classical Paintings for the Blind

3D Printer

Classical art is being recreated through the 3D printing process by the Unseen Art Project in order to allow the blind to enjoy timeless pieces like the Mona Lisa. Photo credit: Unseen Art Project. 3D Modeling Art blind art classical art Mona Lisa Unseen Art Project

Art 205

What is Metrology Part 20 – Processing

3DPrint.com

This is a brief overview of the coding language Processing. It has great intersection within the 3D printing and image processing realms of knowledge. 3D Design 3D Printed Art 3D Scanning 3D Software Education Science & Technology 2D images 3D image art coding design digital media Generative design image processing metrology OpenGL Processing software sketchbook technology

Trending Sources

The Process of Going From Art to Part

The Solidworks Blog

At some point in your life you’ve inevitably heard the phrase “art to part.” It’s a multi-faceted process and rarely is it linear. Amazingly, for most designers, this intensely creative process often fits into a fairly formulaic progression.

Art 113

Sales, Art, Science, Craft?

3D Printing Hub

The article I wrote, Moving From Selling As An Art To Selling As A Science , has stirred up a lot of reaction in the various venues in which it’s appeared. Many suggest, I think correctly, that sales is a blend of art and science. All are disciplined, focused, process oriented.

Art 72

From Craft to Art: The Journey of Art Jewelry Forum’s Rebekah Frank

Shapeways Blog

Today, Frank is the Executive Director of Art Jewelry Forum (AJF). AJF was founded in 1997 by Susan Cummins and a group of art jewelry enthusiasts. Today, AJF is the resounding voice in art jewelry around the world. Visit Art Jewelry Forum.

Art 72

Pratt Fine Arts + Shapeways Create a Groundbreaking Jewelry-Making Course

Shapeways Blog

Sometimes, a 3D printed design requires additional post-processing steps like stone settings or patinas. That’s thanks to Shapeways’ new partnership with Seattle’s community-focused Pratt Fine Arts Center.

Why 3D Printing is Art’s Secret Weapon

Shapeways Blog

It’s no surprise that 3D printing has set artists free — and supported new ways of generating art itself. Nervous System : “Growing” Art. Ashley Zelinskie : Art for the Singularity.

Art 56

Design in the Age of Experience, days 4 & 5: focus on the art of living

3D Perspectives

We speak of the art of living , not the science of living. Design as an art form contains lessons on healthy and sustainable living. What happens when art meets science? He is mixing art and science to make shapes inspired by Bowie’s music.

Art 80

3D Printed Art Nouveau Door Plate FTW

3D Printing Industry

Recently, he was kind enough to share his 18th century-inspired door handle plates with Polish multi-tool 3D printer manufacturer Zmorph, including a walk-through of the entire process. … The original post 3D Printed Art Nouveau Door Plate FTW appeared first on 3D Printing Industry.

Art 114

The Bronze Age Meets the Digital Age in the Art of Tim Belliveau

Shapeways Blog

Belliveau started to rethink his own process, which had become costly and time-consuming. His new process was indeed faster, but printing in bronze was still just as pricey. It’s a blend of modern and traditional that ultimately democratizes the art of glassblowing.

Art 81

Korean Architect Se Yoon Park Designs Stunning 3D Printed Trees for His Art Installation

i.materialise

Armed with the knowledge of 3D modeling and 3D printing, a background in architecture, and the will to liberate his creative mind, Korean designer Se Yoon Park has created a stunning art installation made up of 3D-printed trees. The 3D Printing Process behind the Art.

Art 75

Laser Institute’s LAM Workshop Explores State of the Art in Additive Manufacturing

3D Printer

Lasers are an integral part of many 3D Printing processes, making it a natural fit that the Laser Institute of America [LIA] annually produces the Laser Additive Manufacturing [LAM] Workshop.

Art and 3D Printing: Meet Curious Artist Koenraad Van Daele

i.materialise

Van Daele studied art and sculpture in Brussels and Carrara (Italy) where he explored clay modeling, molding and stone sculpture. When did you start using 3D printing for your art? How is your creative process? Does your creative process depend on the material you will use?

Art 75

Engineering is Art: Q&A with Artist and Engineer Shane McKenna

The Solidworks Blog

However, you might need to dig a little deeper to become familiar with his other passion: Art. From furniture and mantles to decorative art and abstract works, McKenna uses SOLIDWORKS to bring many different creative projects to life.

Art 92

Mani Zamani’s 3D Printed Toy Art Has Landed

3D Printing Industry

Is it a toy or a work of art? Does a work of art become ‘less than art’ when it is reproduced and printed using a different material? Does an art object become a toy through the process of miniaturization and reproduction? If that is what life is, then how is art any different?… … The original post Mani Zamani’s 3D Printed Toy Art Has Landed appeared first on 3D Printing Industry. 3D Printers 3D Printing Art & Sculpture Toys

Art 87

The Art of Time: Prototyping the Future of Watchmaking

Shapeways Blog

The S-Town podcast recently introduced its millions of listeners to the word horology, or the art of measuring time. The holy grail of watchmaking,” he has written , ”is to seamlessly mesh engineering and art.”. How are you using Shapeways and 3D printing in your prototyping process?

Art 76

Device Art: 3D Printing and Interactive Electronics With Pamela Liou

Shapeways Blog

In her Device Art course at Parsons School of Design, students learn the basics of electronic circuitry design and physical computing so they can create interactive art projects. We spoke to Pamela about the Device Art class and how students are using 3D printing for their projects.

Art 72

The Art of ‘Virtual’ Stone Skipping

The Solidworks Blog

Put very simply the CEL method allows engineers and analysts to simulate time dependent processes that involve extreme deformation, or the calculation of the interaction of fluids and structural components amongst other capabilities.

Art 106

3D Printed Cover Art for Street Fighter V

3D Printing Review

Source3, the platform for licensing and the distribution of official 3D content, have launched a partnership with the game’s creators Capcom to provide 3D printed versions of the the cover art for the eagerly anticipated Street Fight V game, scheduled for release in March 2016.

Art 130

Korean Architect Se Yoon Park Designs Stunning 3D Printed Trees for His Art Installation

i.materialise

Armed with the knowledge of 3D modeling and 3D printing, a background in architecture, and the will to liberate his creative mind, Korean designer Se Yoon Park has created a stunning art installation made up of 3D-printed trees. The 3D Printing Process behind the Art.

Art 104

HP 3D Printing Allows LIMB-Art to Bring Newfound Style to Prosthetics

Additive Manufacturing

North Wales, 13 August, 2019 – LIMB-Art , a UK design and manufacturing company, is using the HP Jet Fusion 3D 4200 in alliance with service bureau Design Reality to produce eye-catching, beautiful prosthetic leg covers. Further information on LIMB-Art can be found on its website: [link].

Art 60

3D Printing Creates Physical Art Experience

Stratasys

As he continued to further study art, architecture and other enterprises, he kept connected to the extreme sports industries through Red Bull. Kamanchi knew from previous prototyping that one 3D printing process could provide a solution to both challenges.

Art 86

3D Printing Technology-Integrated Art Projects Engage the Community

Afinia

Corinne Okada Takara is a Bay Area artist and arts educator who creates technology-integrated art projects. Takara creates public collaborative works of art and hosts workshops at museums, libraries, classrooms and colleges.

Art 80

Ioan Florea Presents New 3D Printed Auto Art at 3D Print Week

3D Printing Industry

Though he has not yet 3D printed an entire car, his fused deposition transfer process has allowed him to construct unique shapes, which he then applies to larger structures. 3D Printing Art & Sculpture News By Michael Molitch-Hou.

Art 114

Irish Digital Art Student Brings a Sea Monster to Life – With 3D Printing

i.materialise

Amy Doran is a graduate of 3D Design, Model Making and Digital Art from the National Film School at I.A.D.T Graduate Exhibition in Dublin, the New Blades Graduate Exhibition in London, and the Exhibition by Emerging Artists 2016 in the Courthouse Arts Centre in Co.

Art 100

Remixing Ancient Art at Samson Young’s Venice Biennale Exhibition ‘Songs for Disaster Relief’

Shapeways Blog

Wenman, a multimedia artist and 3D fabrication consultant , began his design process by 3D scanning the plaster cast of the Nike of Samothrace made by the Louvre’s atelier. In fact, the merging of these roles impacts not only the use of 3D printing, but also the expressive limits of art.

Art 83

A Leg and Two Tusks: Viktoria Modesta, Prosthetics, and Performance Art

Shapeways Blog

For the past several years, she has made prosthetics a central part of her performance art. Modesta presented Sonifica at Art Basel Miami. The collaboration was sponsored by Autodesk, which produced this video about the process.

Miami 74

Meet Veronika Schmid, the Designer Behind the Art World’s 3D Printed Masterpieces

Shapeways Blog

She’s also the unseen hand behind many prominent works of contemporary art. Veronika was kind enough to share her perspective on 3D printing in the art world. Usually it’s ideas that get developed during the process. The metalization process used on a Frank Stella piece.

Art 80

Tactualized Sculpture by Dennis Harroun Shows Ins and Outs of 3D Printed Art

3D Printing Industry

There is a lengthy and highly specialized process involved, where accurate planning can improve and simplify each successive step. … The original post Tactualized Sculpture by Dennis Harroun Shows Ins and Outs of 3D Printed Art appeared first on 3D Printing Industry.

Art 114

Designing Projects with 3D Printing, Art, Science, and Engineering

Afinia

— Experience 3D Printing: Art and Engineering 3D-printed mounts used in Silverman’s “Mobile Sun-Seeking Robot” project. “I 3D Printers and Printing Art News Testimonials & Reviews 3D Print Maker Dot Silverman is an Electronics Designer at Instructables.

Art 90

The Art of Simulation Data Management

The Solidworks Blog

However, I have always wondered how companies that adopt aggressive design simulation processes successfully manage the resulting data. The Art of Simulation Data Management - July 15, 2014.

Data 95

35 Meter Long Model of Beijing Through Time “4D Printed” for Venice’s Biennale of Art

3D Printing Industry

It’s not quite a consensus, yet, but the term “4D printing” is generally accepted as describing a 3D printed object that continues to evolve with time — after the print process itself is finalized. 3D Printing 3DP Applications Art & Sculpture Asia Europe Industry news

Art 114

Plastic AM works of art at design shows

Rapid Prototyping News UK

The work we’re doing with Michael Eden is continuing to generate stunning works of art using our plastic Additive Manufacturing process, and some are being displayed at design shows at the moment.

Art 76

Waganari Melds Art and Technology with Dark, Ethereal 3D Printed Wire Sculptures

3DPrint.com

What an artist creates is a bundle of complexity, all sealed in one: a process, an expression of emotion, sometimes compulsive, repulsive — or breathtaking with its beauty. 3D Design 3D Printing 3d printed art 3d printed sculpture art germany Moto Waganari sculpture

Art 114

Artist Robert Lazzarini Discusses CubePro in the Arts

3D Systems

Artist Robert Lazzarini Discusses CubePro in the Arts Tuesday, May 26, 2015 - 13:30 New York artist Robert Lazzarini has made a name for himself through his transformational sculpture work, taking common objects and pulling them through compound distortions to create a new type of viewing space.

Art 95

Generative 3d modeling for 3d printing workshop by parametric | art at Budapest 3D Printing Days

Algorithmic Art

Computational geometry describes complex 3-dimensional forms and aesthetic processes in the form of mathematical algorithms as executable code. parametric | art. parametric | art. parametric | art. parametric | art. parametric | art. parametric | art.

Art 90

3D Printing Emotions? Try Turning Your Love Story Into Art!

Stratasys Blog for a 3D World

When they get familiarized with the additive manufacturing process and the ability to create objects layer by layer, it will open up their mind to new possibilities in the creative process. People get very excited with technology and art and this will only add to that excitement.”.

Art 111

Artists Make Enormous 3D Printed Interactive Mountain Art Installation, ‘Sisyphus Stone’

3DPrint.com

While most maintain a positive spin on the creative process and eschew the constant... View the entire article via our website. 3D Design 3D printed art 3D Printing 3d printed art installation 3d printed mountain barcelona European Art Science and Technology Network Fab Lab Barcelona fablab Barcelona Sisyphus Stone spainThe act of creating, innovating, and engaging in the general duties of an artist and designer can without doubt sometimes be depleting.

Art 87

Magical 3D-Printed Shadow Art from Drzach & Suchy: 3D Printing From a Different Angle

Materialise

Drzach & Suchy are a designer duo like no other: Drzach is an architect who combines art and design, while Suchy is a cryptographer and a software engineer who experiments with holograms and various techniques and materials. 3D Printing Art and Design

Art 90

Robert Welch Designs Turns Silverware into an Art Form With SOLIDWORKS

The Solidworks Blog

There are some, however, who have turned silverware into an art form, making us sit up and pay attention. Taking full advantage of the program’s potential, the team used the Wizard Pattern design process to create the series’ own pattern specific to that brand.

Art 113

Get Ready to Create Stunning 3D Printed Art with Nervous System’s Nature-Inspired Software

3D Printing Industry

Today, the firm outlined the process that often guides their work, a piece of software that simulates the biomechanics of nature to yield objects that resemble leaves growing and flowers blooming. … The original post Get Ready to Create Stunning 3D Printed Art with Nervous System’s Nature-Inspired Software appeared first on 3D Printing Industry. 3D Printing Art & Sculpture Design Jewellery NewsBy Michael Molitch-Hou.

Art 87

3D Pixel Art and Printing Collide Creating GrabCAD Voxel Print

Stratasys Blog for a 3D World

In the world of digital art, this might be pixel by pixel, in biology it is cell by cell and in 3D printing this is voxel by voxel, allowing researchers to create almost anything. The post 3D Pixel Art and Printing Collide Creating GrabCAD Voxel Print appeared first on Stratasys Blog.

Art 85

DIMENSIONEXT: The Art Of 3D Printing: From STEM to STEAM.

Dimensionext

The Art Of 3D Printing: From STEM to STEAM Education. The Art Of 3D Printing: From STEM to STEAM Education. The Arts. All religions, arts and sciences are branches of the same tree. Art and design sits at the same table as STEM.” Pages. SECTOR NEWS. REPORTS.

Art 83