3D-Printed SlothBot Aids Conservation Efforts in Atlanta

3DPrint.com

A new resident will be living high above the ground in the Atlanta Botanical Garden for the next few months, and while it may resemble an animal, it’s actually a.

‘3D Printing the Future’ Exhibit Opens at Museum of Design Atlanta

3DPrint.com

The museum once known as the Atlanta International Museum of Art & Design changed its name in 2003 to the Museum of Design Atlanta, allowing itself the clever acronym of MODA (which means ‘fashion’... View the entire article via our website.

‘Transforming Fashion’ Exhibit: Atlanta Museum Highlights 3D Printed Body of Work by Tech Pioneer Iris van Herpen

3DPrint.com

3D Design 3D Printing 3d printed apparel 3d printed dress 3d printed fashion 3D printed fashion collection 3d printed fashion design 3d printed haute couture 3D printing exhibition 3d systems Atlanta High Museum of Art Iris van HerpenNothing appeals to the artistic soul like new tools that allow for a spirited combination of innovation and independence. As the world ooohs and ahhhs over each new 3D printed wonder hitting the. View the entire article via our website.

Luxexcel Opens Customer Demonstration Lab in Atlanta, GA

Additive Manufacturing

September 27, 2018 – EINDHOVEN (the Netherlands) & ALPHARETTA (GA, United States of America) Luxexcel announced today the opening of the new US-based Customer Demonstration Lab in Alpharetta, GA (greater Atlanta area). The facility will house a full Luxexcel VisionPlatform™ system and supports the Luxexcel customer base. Luxexcel Customer Demonstration Lab.

The Sky is the Limit for 3D Printing Company Branch Technology

3DPrint.com

3D Design 3D Printing 3d printed architecture 3d printed art installation 3d printed museum exhibits branch technology freeform 3d printing KBAS moda museum exhibit museum of design Atlanta tallest 3D printed structure TN-01With 3D printing technology becoming capable of printing larger and larger objects, it’s not too much of a stretch to imagine a 3D printed skyscraper in the future. We’ve been hearing. View the entire article via our website.

Shapeways 3D Prints 500 Coca-Cola Bottles for Museum Exhibit Celebrating Design’s Centennial

3DPrint.com

3D Design 3D Printing 3d printed bottles Atlanta bottle coca cola Coca-Cola bottle Conran and Partners High Museum of Art museum exhibit shapeways I’m not a big soda fan, but when I was flying home to snowy Ohio from my remember-the-sunshine trip to south Florida last week, one of the first things I grabbed at the airport... View the entire article via our website.

Statue of Zeus: Stratasys 3D Prints an Ancient Wonder of the World to Mark Olympic Opening

3DPrint.com

Featured Stories 2016 olympics 2016 summer olympics 3D printed ancient artifacts 3d printed classical art 3d printed statue 3DPtree A Few Questions For ancient greece Atlanta Fortus 900mc greece Kennesaw State University Millennium Gate Museum Mims Park Peace Column National Monuments Foundation robot olympics Stan Mullins stratasys Stratasys Fortus 900MC 3D printer Stratsys Fortus 900mc ZBrush zeus

Branch Technology 3D Prints a “Backdrop for Innovation” for Chattanooga’s Enterprise Center

3DPrint.com

3D Design 3D printed art 3D Printing branch technology KBAS keith kaseman museum of design Atlanta the enterprise center TN-01Last July, Chattanooga, Tennessee-based Branch Technology went public with their technology and products, which include full-sized 3D printed walls and other furniture pieces that were created using. View the entire article via our website.

Oerlikon Expands Additive Manufacturing R&D and Production Capacity in the US

Additive Manufacturing

The Charlotte site complements citim’s sites in Barleben (Magdeburg), Germany, and Atlanta, Georgia, USA, and the new production facility for advanced metal powders for additive manufacturing and advanced coatings in Plymouth Township, Michigan, USA. Featured News Additive Manufacturing Atlanta Barleben citim Dr. Roland Fischer Metal Additive Manufacturing OC Oerlikon Corporation AG Oerlikon Pfäffikon Plymouth Township

Robo to Integrate 3DPrinterOS Software So Educators Can Easily Adopt 3D Printing in the Classroom

3DPrint.com

This summer, 3D printer manufacturer Robo announced that it had acquired Atlanta-based company MyStemKits, which provides the largest online library of STEM curriculum in the world, in order to. View the entire article via our website. 3D Printing 3D Software Education 3d printing software 3dprinteros MyStemKits robo STEM curriculum

MetalMaker 3D Launching Rapid Prototyping Service for Metal 3D Printed Parts On Demand

3DPrint.com

Tomorrow, North America’s largest metal forming, fabricating, welding, and finishing event, FABTECH, will begin at the Georgia World Congress Center in Atlanta. Many industry announcements will. View the entire article via our website. 3D Printing Business Metal 3D Printing 3d printing business news 3D printing rapid prototyping advanced manufacturing aluminum alloy FabTech foundry investment casting MetalMaker 3D on-demand 3D printing prototyping services startup trade show

Quality Control in 3D Printing Through ISO and LEAN

3D Printer

QuickParts , based in Atlanta, GA is ISO 9000 certified and Potomac Photonics in Baltimore, MD recently completed renewal of their ISO certifications which were first earned in 2006. ISO is not an arbitrary designation, but a living, breathing process implemented everyday by Potomac employees in our work for customers, explains President and CEO Mike Adelstein. In

Dragon Con 2016: Cosplayers Including Bindi Smalls 3D Print Incredible Costumes & Props

3DPrint.com

Running this weekend, September 2-5 in Atlanta, Georgia, this cosplayers’ paradise is offering enthusiasts of any number of fandoms a gathering place to show. It’s here: Dragon Con 2016. View the entire article via our website. 3D Design 3D printed art 3D Printers 3D Printing 3d print cosplay 3d printed cosplay 3d printed cosplay props barnacules barnacules nergasm Bindi Smalls cosplay cosplayers Form 2 formlabs lulzbot Overwatch Punished Props

The Electric Bubblegum: The 3D printed electric skateboard hits Kickstarter

Top 4 3D Printing

The brainchild of Atlanta inventor and skater Andrew James, this bad boy can take you up to 21 miles per hour, despite being a mere 27 inches long and weighing just 12.1 James decided to launch the campaign after noticing the amount of attention his homemade electric board was getting from passersby as he zipped around Atlanta.

Smart data power passengers’ airport experiences

3D Perspectives

Forward-looking facilities like Hartsfield-Jackson Atlanta International (the world’s busiest airport) and Copenhagen Airport (the busiest international airport in Scandinavia) are using digital technologies to streamline end-to-end travel.

Data 63

SOLIDWORKS Sponsors DriveWorks World 2017

The Solidworks Blog

DriveWorks World 2017 saw over 120 people from the DriveWorks community gather in Atlanta for a week of learning, networking and seeing what’s new in DriveWorks 15. During the same week that DriveWorks World was in Atlanta, NATLSWUG was also holding its very first SOLIDWORKS User Group Meeting, in Atlanta! Watch the highlights from DriveWorks World in Atlanta below.

Zeus Returns to Throne 1,500 Years Later with Stratasys 3D Printing

Stratasys Blog for a 3D World

The 3D printed version of the Statue of Zeus at OIympia, based on the original created by the sculptor Phidias in 422 BC, will be the centerpiece of a new exhibit at Atlanta’s Millenium Gate Museum , timed for the opening of the 2016 Olympics. Entitled “The Games: Ancient Olympia to Atlanta to Rio,” the exhibition opens August 20, 2016 and runs until January 2, 2017, and it features Greek artifacts from The Hearst Castle Collection in San Simeon, California, and the Michael C.

Design-2-Part Shows Announce 2018 Schedule

Design 2 Part News

D2P will hold these events in Grapevine (Dallas), TX; Atlanta, GA; Schaumburg (Chicago), IL; Santa Clara, CA; Long Beach, CA; and Marlborough (Boston), MA. Cobb Galleria Centre, Atlanta, GA. November 7, 2017 – Design-2-Part (D2P) Shows, America’s largest design and contract manufacturing tradeshows, is pleased to announce their 2018 show schedule. The eleven event slate includes six spring shows and five fall shows. The schedule is anchored by six annual shows.

Access More than 1,500 Exhibitors and Hundreds of Innovations at FABTECH

Additive Manufacturing

6-8 in Atlanta, will feature exhibitors showcasing a variety of innovative technologies, in the fields of: 3D/additive manufacturing, bending, cutting, lasers, robotics, material handling, and more, from top industry suppliers like AIDA-America, Amada America, Bystronic, BLM Group USA, Cincinnati, Lincoln Electric, Mitsubishi Laser, Nordson, TRUMPF Inc.

America’s Most Beloved Cities, Wrapped Around Your Finger

Shapeways Blog

Whether you’re from San Francisco, New York, Detroit, or Atlanta – these contemporary rings are made for representing your favorite city, no matter where you are. Whether or not you’re from Bahston Boston , these wickedly amazing cityscape rings by Shekhtwoman let you wear your city around your finger. And if you’re a transplant from another city, her collection includes major metropolitan areas around the world such as NYC , Amsterdam , Los Angeles and MORE.

Day Three at 3DEXPERIENCE World 2021 Recap

The Solidworks Blog

Thanks for virtually joining us for 3D EXPERIENCE World 2021 and we can’t wait to see you all in person for 3D EXPERIENCE World 2022 in Atlanta! The last day of general sessions was dedicated to the hard work of our wonderful, passionate user community.

3DS and the Millennial Trains Project

3D Systems

For this third journey, the train will pass through the southern United States, stopping in LA, Austin, San Antonio, New Orleans, Atlanta, and Washington DC. 3DS and the Millennial Trains Project Wednesday, December 10, 2014 - 15:35 This past summer, we partnered with the Millennial Trains Project to take some of the brightest minds of this generation across the country on a 10-day train tour.

Design-2-Part Shows Sets Annual Attendance Record

Design 2 Part News

D2P will look to continue this run in 2019 with eleven more shows scheduled in Grapevine, Texas; Atlanta, Georgia; Uncasville, Connecticut; Schaumburg, Illinois; Santa Clara, California; Minneapolis, Minnesota; Marlborough, Massachusetts; Pasadena, California; Oaks, Pennsylvania; Indianapolis, Indiana; and Charlotte, North Carolina. PROSPECT, Conn. — (December 5, 2018) — Design-2-Part (D2P) Shows, a series of design and contract manufacturing trade shows across the U.S.,

FABTECH Partners Invest in Workforce Development

Additive Manufacturing

The route will take participants through Atlanta’s Centennial Olympic Park. Location: Centennial Olympic Park 265 Park Avenue West, Atlanta, GA 30313. North America’s largest metal forming, fabricating, welding and finishing event heads to the Georgia World Congress Center in Atlanta in 2018. RUN4MFG 5K raises funds for industry education and scholarships.

The Ultimate Maker Faire List for 2014

i.materialise

Maker Faire Atlanta. Although the Atlanta Maker Faire has over 10,000 attendees and is considered a top Featured Faire, those feats are not what they are most proud of. Moreover, Maker Faire Atlanta is the only recognized featured faire in the southeast US. With i.materialise recently attending Maker Faire Bay Area in May, it only seemed logical to provide our community with a list of upcoming Maker Faires!

SOLIDWORKS Sponsors DriveWorks World 2018

The Solidworks Blog

Watch the highlights from DriveWorks World 2017 in Atlanta here: Maria Sarkar, VP and Co-Founder of DriveWorks said, “Thank you SOLIDWORKS for sponsoring DriveWorks World again! DriveWorks design automation and online 3D CPQ for SOLIDWORKS is used by companies large and small.

Technology Association of Georgia to Present Seminar on…

Design 2 Part News

The Technology Association of Georgia (TAG) Manufacturing Society will present a breakfast seminar, “On-Shoring – Bringing Manufacturing Jobs Back to America” on Thursday, March 26, 2015 at the Cobb Galleria Centre in Atlanta, GA. Troels Adrian, Director, Supply Chain & Advanced Manufacturing, Metro Atlanta Chamber. “Technology Association of Georgia to Present Seminar on “On-Shoring”. In Conjunction with the Design-2-Part Show.

Design-2-Part Shows Post Record Attendance

Design 2 Part News

The third show in Atlanta, Georgia posted its highest attendance since 1995. “We April 26, 2018 – If trade show attendance is an indicator of the health of manufacturing in the United States, then the industry is off to a great start in 2018. Design-2-Part (D2P) Shows, a series of eleven annual design and contract manufacturing trade shows across the U.S., has set attendance records in each of the three shows held so far in 2018.

Don’t Miss the SOLIDWORKS Largest User Group Meeting Ever 2017

The Solidworks Blog

Atlanta, GA (combined). Last year Todd Blacksher proposed something unusual for the SOLIDWORKS User Group Network: The SOLIDWORKS Largest User Group Meeting Ever, or SLUGME. The idea was to bring together hundreds of SOLIDWORKS User Group members to live, local meetings around the world, and at a pre-designated time, each group will tune in to a broadcasted technical presentation.

How to Make Your SketchUp Files 3D Printable

Shapeways Blog

At Workbench Conference in Atlanta, Georgia, I and the Shapeways team rolled up our sleeves and got to use (or at least pose with) some impressive power tools. We also met dozens of makers using wood and metals to realize the most incredible projects. With folks like Bob from I Like To Make Stuff , our (now IRL!) friends Evan and Katelyn , Jimmy Diresta , and countless others convening, we had ample opportunity to talk to all of them about the tools of their trades.

CRP USA protagonist at the 5th Annual JEC Americas Composites Show & Conferences

Additive Manufacturing

This is CRP USA’s first time exhibiting in the Atlanta metro area. The show returns to Atlanta, GA, at Georgia World Congress Center with Focus on Composites Manufacturing and End-Users needs. This is CRP USA’s first time exhibiting in the Atlanta metro area, and it will be a good opportunity to meet and work with more clients in the South Eastern region of the United States.

How 3D Printing Is Speeding Up Small Businesses

3D Printing Review

Normally he had a two-week turnaround time sending out to a printing service in Atlanta that threw him to the back of the line because it handled huge automobile and aviation clients, Thorsen says. He came back the very next week with six more designs.. Since David Friedfeld took over ClearVision Optical from his father in 1985, hes seen most eyewear manufacturing move overseas. The 120-employee company, based in Hauppauge, N.Y., is bringing a small piece of it back.

Tooling – Repeating the Pattern…

Additive Manufacturing

The process was co-developed at Atlanta-based Emrgy Hydro, the DOE Manufacturing Demonstration Facility at ORNL and Wisconsin-based Eck Industries. By ORNL News | Sara Shoemaker | shoemakerms@ornl.gov. Oak Ridge National Laboratory has successfully developed and tested a novel sand casting technique to quickly design complex patterns to fabricate components for industry partner Emrgy Hydro , makers of hydropower devices designed to generate electricity from slow or shallow water flows.

New Digital Manufacturing Road Show Helps You Make It in the New Economy

Stratasys Blog for a 3D World

12/04/14: Atlanta, GA. Better. Faster. Smarter. More agile and responsive. Lower costs and higher profits. This is the essence of Digital Manufacturing. Stratasys invites you to join the Digital Manufacturing revolution, to think beyond traditional manufacturing and demand more of yourself, just as your customers are demanding more of you. The event is targeted towards anyone involved with Manufacturing Operations from a floor manager to the CEO.

Pioneer of 3D printed design Joris Laarman gets High Museum of Art exhibition in Atlanta

3ders

A new exhibition at the High Museum of Art in Atlanta is highlighting the work of Joris Laarman, a Dutch designer known for his forward-thinking and experimental 3D printed pieces. The exhibition, entitled “Joris Laarman Lab: Design in the Digital Age,” opened its doors yesterday, February 18, and will run until May 13, 2018. 3D Design

Atlanta Hobby launches Vortex, revolutionary new 3D printed multi-rotor UAV

3ders

Atlanta Hobby, one of the fastest growing hobby specialty shops and supplier of small-scale aerial photography equipment, launched the Vortex RTF Combo, one of the world’s most advanced hexacopters this week. This article Atlanta Hobby launches Vortex, revolutionary new 3D printed multi-rotor UAV is first published at 3ders.org.

FABTECH Tracking the Rising Trend of Women in Manufacturing

Additive Manufacturing

Plan to join us for FABTECH , November 6-8 , 2018 in Atlanta , Georgia. North America’s largest metal forming, fabricating, welding and finishing event heads to the Georgia World Congress Center in Atlanta in 2018. The metal fabrication and manufacturing industry has adjusted in recent years to meet the demands of an evolving global economy, impacted by social, political, economic and technological advancements that effect all aspects of the industry.

Atlanta Hobby 3D prints special edition Vortex multi-rotor UAV for Roswell Flight Test Crew

3ders

Back in October at the FlySafe 2014 Exhibition in Las Vegas, Cliff Whitney of Atlanta Hobby’s UAV Tech Team unveiled the Vortex, one of the world’s most advanced 3D printed hexacopters. This article Atlanta Hobby 3D prints special edition Vortex multi-rotor UAV for Roswell Flight Test Crew is first published at 3ders.org.

SWOOD, Woodworking and SOLIDWORKS

The Solidworks Blog

If you’re interested in learning more about EFICAD and SWOOD in person, come see us at the International Woodworking Fair (IWF) in Atlanta (booth #8328). Designing and manufacturing woodworking projects requires a great amount of attention to detail. When it comes to bringing concepts to life in CAD, this means using dedicated woodworking features that require solutions specifically created for woodworking.

MGX Boutique’s Designer Patrick Jouin’s Work on Display at Stedelijk Museum, Amsterdam

i.materialise

High Museum of Art Atlanta, USA. Are you planning a trip to Amsterdam between October 25, 2014 and February 15 th , 2015? Be sure to stop by the Stedelijk Museum to see the One_Shot.MGX stool and the Solid C2 chair by Patrick Jouin on display next to other forward-thinking designs in the “ Superbox. Design Acquisitions. exhibition. . Victoria and Albert Museum, London.

SOLIDWORKS Sponsors DriveWorks World 2018

The Solidworks Blog

Watch the highlights from DriveWorks World 2017 in Atlanta here: Maria Sarkar, VP and Co-Founder of DriveWorks said, “Thank you SOLIDWORKS for sponsoring DriveWorks World again! DriveWorks design automation and online 3D CPQ for SOLIDWORKS is used by companies large and small.

Goldman Sachs: It Looks as if the U.S. Manufacturing…

Design 2 Part News

economic-surprise indexes, which have largely been on fire since early February, and the coincident decline in the Atlanta Fed’s model for first-quarter gross domestic product. “Goldman Sachs: It Looks as if the U.S. Manufacturing Recession Might Be Over” By Luke Kawa, Bloomberg. Spring has arrived for the long-struggling sector. The U.S. manufacturing sector just batted five-for-five in its version of spring training.

Digital Doctoring

3D Perspectives

This is a very exciting, fast-moving field,” says Felipe Lobelo , associate professor of global health at Emory University in Atlanta. By Catherine Bolgar. The rapid increase in personal devices and smartphones with sensors and applications that can track various measures of users’ health offers new avenues for preventive care.