University of California: 3D Printing with Magnetics & Hexaferrite Materials

Max Ho of the University of California recently published his dissertation, ‘Magnetic 3D Printing of Hexaferrite Material,’ exploring the use of progressive technology and materials, and the. 3D Printing fdm 3d printing fff 3d printing Hyrel M30 printer Magnetic 3D printing University of California

University of California San Diego researchers develop “easy-to-use” 3D bioprinting method for living blood vessels

3D Printing Industry

Bioengineers from the University of California San Diego (UCSD) have developed a 3D bioprinting method that integrates natural materials which produce lifelike organ tissue models. Udit Parekh University of California San Diego Xin Yi

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Certification giant Element doubles down on California powder characterization facility

3D Printing Industry

Global material and product certification leader Element has upgraded its laboratory in Huntington Beach, California with a dedicated characterization facility for additive manufacturing powders. Materials Element Nadcap TÜV SÜDThe new testing equipment will allow for chemical composition analysis, powder sieve analysis, particle size distribution, flow rate, apparent density, tap density, and gas pycnometry – a method of measuring an […].

3D printing research CrAMmed: Texas A&M University, University of California, National Agency for Science and Engineering Infrastructure

3D Printing Industry

The studies dig extensively into optimizing material processes for FDM 3D printing. Iizuka Texas A&M University – Kingsville University of California University of Waterloo Wei Yao Yuliang Zhao Zhikun ZhanIn today’s CrAMmed, our additive manufacturing research digest, you’ll find a selection of papers and developments in 3D printing from the academic world.

University of California Researchers Explore Acoustophoresis in Regulating Electrical Composites for 3D Printing

Scientists from University of California Santa Barbara have been exploring the use of acoustophoresis in regulating electrical composites in accompaniment with 3D printing in ‘Flexible Composites. 3D Printing 3D Printing Materials 3d printed electronics 3d printing research 3D printing with acoustics electrical transport anisotropy

Ultrafast 3D Printer Company Nexa3D Commences Manufacturing Operations in California

Additive Manufacturing

Ventura, CA, August 20, 2019 – Nexa3D , the maker of ultrafast stereolithography production 3D printers, today announced it has started manufacturing operations in California as it scales its commercial activities to fulfill increased demand for the company’s flagship NXE400 printer.

Come see us at 3D Printshow California 2015!


Sculpteo will be exhibiting at the 3D Printshow California 2015. We encourage you to stop by and learn more about our services, materials and the companies that work with us. This year’s 3D Printshow California will take place, just outside of LA, in Pasadena on September 11-12.

Broken shoe? USC’s self-healing 3D printer material can help it repair itself

3D Printing Industry

Researchers at the University of Southern California (USC) have developed a 3D printed rubber material that has the ability to repair itself. The self-healable materials were 3D printed using a customized photopolymerization process. […]. Research An Xin Haixu Du Kunhao Yu photopolymerization Qiming Wang self healing University of Connecticut University of Southern California USC USC Viterbi Ying Li

3D Printed Self-Healing Material Can Fix Sole of Shoe In Two Hours

The potential uses for unique self-healing materials are numerous, varying from fixing cell phone screens and other electronics to repairing cartilage and other biomedical applications. 3D Printing 3D Printing Materials Science & Technology journal article nature Nature Journal photopolymerization research paper self-healing materials University of Southern California usc USC Viterbi

NASA gear up on the manufacturing of advanced materials for Jupiter mission

3D Printing Industry

A team led by technologist Douglas Hofmann at NASA's Jet Propulsion Laboratory (JPL) in Pasadena, California, is reinventing the gear – using an advanced amorphous. Aerospace BMG BMGs bulk metallic glasses California Caltech Douglas Hofmann Europa Exmet Heraeus Jet Propulsion Laboratory JPL Jupiter materials engineering Materials Science Mission Moon Nasa Pasadena Space

Meet Us at the 3D Printshow in Pasadena, California on September 11 and 12


On September 11 th and 12 th we’ll be attending the 3D Printshow in Pasadena, California. We will present our 3D printing materials and services and will be available to discuss your 3D printing projects and business ideas. Green Street, Pasadena, California 91101.

Nanoscribe’s New Printing Material for Life Science Applications

At one of the world’s leading photonics, laser, and biomedical optics conference taking place right now in San Fransisco, California, the SPIE BiOS and Photonics West conference, German-based. 3D Printing 3D Printing Materials 2pp 3d printing material biocompatible 3D microstructures IP-Visio low-fluorescent 3D microarchitectures nanoscribe Nanoscribe GmbH SPIE BiOS and Photonics West conference two-photon polymerization Two-photon polymerization 3D printing

Plant Inspires 3D Printed Material for Cleaning Up Oil Spills

3D Printing Science & Technology biomimicry oil spill clean up Oil spills Salvinia molesta University of Southern CaliforniaThere are few things more environmentally devastating than an oil spill, and the consequences last for years after the initial disaster. All that oil isn’t easy to clean up, despite the best. View the entire article via our website.

Nano Dimension Expands its North American Presence, Opens Customer Experience Center in California

Additive Manufacturing

This California location will be the second of several Nano Dimension CECs planned worldwide to accelerate the adoption of additive manufacturing for electronics development. NESS ZIONA, Israel – December 6, 2017 – Nano Dimension Ltd.,

B9Creations and SDC Technologies open $500k 3D printing materials facility

3D Printing Industry

B9Creations, a 3D printer and materials manufacturer from South Dakota, has opened a $500,000 additive manufacturing materials development lab in collaboration with SDC Technologies, a California-based coating specialist. Shon Anderson, CEO of B9Creations, said that the new facility will help the two companies bring materials to market “at an aggressive pace.”

3D Printing Industry Review of the year: February 2019

3D Printing Industry

The month of February 2019 saw conferences such as SOLIDWORKS 2019 and TCT ASIA in Shanghai, innovations from start-ups such as UrbanAlps and Hexo Helmets, as well as the presentation of what is said to be “the largest 3D metal printed part for a working vehicle in automotive history.”

Carbon and Dentsply Sirona collaborate to produce 3D printable dental materials

3D Printing Industry

Carbon, a California-based 3D printer and materials manufacturer, has partnered with Dentsply Sirona, a Pennsylvania-based manufacturer of dental equipment, to produce novel denture materials.

Sirona 108

UCLA granted $1.5 million to develop eco-friendly 3D printable concrete

3D Printing Industry

Engineers from the University of California, Los Angeles (UCLA) have received a $1.5 As the most popular construction material in the world, developing a more sustainable alternative to concrete, and being apply to apply it with new technology-driven methods, could help […]. Construction Mathieu Bauchy National Science Foundation University of California Los Angeles

USC: Researchers Inspired by Nature & Nacre for 3D Printing Strong, Conductive Parts

University of Southern California researchers delve into the inspiration of nature in ‘Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability,’ inspired by the. 3D Printing 3D Printing Materials Science & Technology 3D printing and electronics aGNs Electrically assisted 3D printing industrial 3d printing Nacre University of Southern California

3D printed engine part boosts CSU Hornet Racing car power up to 14,000 RPM

3D Printing Industry

Hornet Racing from California State University (CSU), Sacramento redesigned the intake manifold for its Honda CBR600RR series, 4-cylinder engine and 3D printed it out of RPU 70 material, incorporating some custom […]. Materials California State University Carbon CLIP Digital Light Synthesis Formula Society of Automotive Engineers Honda Honda CBR600RR serie Hornet Racing Incase RPU 70 Sacramento

UC Berkeley researchers develop a projection-based 3D printer from CT scans

3D Printing Industry

Researchers from the University of California (UC), Berkeley have developed a 3D printer which projects CT scans onto a rotating volume of photosensitive resin. Named after Star Trek’s Replicator, a device that can materialize any object on demand, this system uses Computed Axial Lithography (CAL) for smooth, flexible and more complex 3D models.

Digital Fabrication in Architecture and 3D Printing Materials in Focus at AAAS Annual Meeting

3D Printing 3D Printing Materials Robotics 3d printing architecture 3d printing in construction AAAS architecture australia boston california construction construction 3d printing construction robot digital fabrication Empa eth zurich In Situ Fabricator National Centre of Competence in Research RMIT RMIT Australia switzerland uc berkeley

Collaborative Research Team Creates 3D Printed Armor Inspired by Chiton Scales

3D Printing 3D Printing Materials 3d printed armor 3d printed protective gear body armor California State University chitonous chitons collaborative connex 500 harvard university kneepad Max Planck Institute of Colloids and Interfaces in Potsdam mit mollusks multi-material printing multimaterial 3d printing research paper scales study Virginia Polytechnic Institute and State University

Introducing the 3DP-RDM Feasibility Studies: Redistributing Material Supply Chains for 3D printing

Capturing the Value

Today we introduce the third study, “Redistributing Material Supply Chains for 3D printing”, which is being led by Prof. There is a broad lack of knowledge in how material supply chains may be part of the redistribution of manufacturing through 3D printing.

Study 141

Interview with Emerging Objects: makers of the 3D printed Cabin of Curiosities

3D Printing Industry

San Francisco Bay Area 3D printing “MAKE-tank” Emerging Objects is exploring the use of alternative materials in architecture. Founded in 2012 by Ronald Rael and Virginia San Fratello, professors at the University of California Berkeley and San Jose State University, the aim of Emerging Objects (according to the website) is to “design and 3D print environments for […].

UCI Researchers Introduce 3D Printed Microfluidics Platform

A few weeks ago, researchers from the Department of Biomedical Engineering at the University of California, Irvine, introduced a paper focusing on an innovative Lego-based modular microfluidics. 3D Printing 3D Printing Materials Science & Technology 3d print legos 3D printed microfluidic devices 3D printed microfluidics 3d printed molds 3D printing microfluidics Abraham Lee lego legos University of California university of california irvine

LLNL and UC Berkeley Researchers Continue Work on Their Promising Volumetric 3D Printing Method

3D Printers 3D Printing 3D Printing Materials Science & Technology CT scans Lawrence Livermore National Laboratory liquid polymer LLNL new 3d printer photosensitive resin research paper uc berkeley University of California at Berkeley viscous volumetric 3D printingIt’s been said that volumetric 3D printing has more speed, flexibility, and geometric versatility than other methods, with a lower cost. In late 2017, researchers at Lawrence Livermore National.

UC Santa Barbara researcher awarded $3 million for extreme 3D printing materials research

3D Printing Industry

University of California, Santa Barbara researcher Tresa Pollock has been granted $3 million by the US Department of Defense (DoD) to carry out research into. Materials Department of Defense Discovery DoD Mary J. Miller metal 3D printing Space Shuttle Tresa Pollock UC Santa Barbara Vannevar Bush Vannevar Bush faculty

Berkeley Researchers Studying Progress & Challenges in 4D Printing

While 3D printing allows for many users to create complex geometries not before possible, 4D printing does that and more with materials and textures that respond to their environment and then revert. 3D Printing 4D printing 4d printing 4D printing metamaterials University of CaliforniaView the entire article via our website.

Study 83

Researchers Developing Super-Strong Materials Thanks to a 3D Printer and the Mantis Shrimp

3D Printing Science & Technology Air Force Office of Scientific Research biomimicry dactyl club David Kisailus mantis shrimp Pablo Zavattieri purdue university University of California RiversideThe rainbow-colored mantis shrimp is gorgeous to look at – to humans, anyway. To its fellow crustaceans, it’s a purple-eyed horror. The mantis shrimp is a brutal killer that dispatches. View the entire article via our website.

Emerging Objects Lets GCode Run Wild in Extruded Clay Experimental Project

California-based Emerging Objects is possibly one of the studios that has experimented most deeply with 3D printing materials and processes, with several impressive projects published worldwide. 3D Design 3D printed art 3D Printing 3D Printing Materials 3d materials 3d printed building materials 3d printed clay california clay clay 3d printing clay extrusion emerging objects gCode Rael San Fratello Ronald Rael Virginia San Fratello

3D Printing News Sliced: Creaform, Copper3D, ICON, 3D Systems

3D Printing Industry

Department of Energy University of Southern California Vulcan II Vyomesh Joshi wasp World Advanced Saving Project Xerion

Interview: Inside UCLA’s faster, multimaterial 3D bioprinter

3D Printing Industry

Recently, a 3D bioprinting project conducted at the University of California, Los Angeles (UCLA) has been making headlines for its potential to create complex biological tissues. Led by UCLA Professor of Engineering Ali Khademhosseini, the project describes a bioprinter that makes use of microfludic chip to efficiently print multiple materials in a single process.

Multimaterial Electronics 3D Printer Showcases ChemCubed’s Materials Expertise

3D Printing Industry

As a materials company, they work with businesses to concoct the exact type of material a client needs. And, at 3D Print Week California, this was all made very palpable with the ElectroUV3D, an LED flatbed 3D printer designed through a collaboration between Direct Color Systems and ChemCubed.… … The original post Multimaterial Electronics 3D Printer Showcases ChemCubed’s Materials Expertise appeared first on 3D Printing Industry.

PLA: The Effects of Annealing & Autoclaving on Mechanical Behavior of Desktop FDM Parts

Researchers from the University of California delve into a very important area of 3D printing for the medical field, experimenting with how sterilization processes affect materials. 3D Printing 3D Printing Materials Featured Stories

3D printing news Sliced MIT, Kratzer, Rocket Lab, Nanoscribe, Relativity Space and Horizon Zero Dawn

3D Printing Industry

Also featured in this edition of Sliced: the University of California San Diego, Oxford Performance Materials, the 2nd World 3D Printing Olympiad, Fan Bingbing, Kitronik, America’s top […]. Lu Tzu-Chieh Tang UC San Diego University of Alicante University of California San Diego World 3D Printing Olympiad Xinyue Liu Xuanhe Zhao

New UC Riverside Study Finds 3D Printed Objects to be Potentially Toxic

3D Printers 3D Printing Materials Business Health 3D Printing 3d print research 3d printed product safety 3d printing materials 3d printing safety Bourns College of Engineering consumer safety form 1 formlabs medical 3d printing Shirin Mesbah Oskui Stratasys Dimension Elite toxic 3d printing materials toxicity University of California Riverside William Grover

Study 87

UC San Diego Researchers' Soft Robot Can Walk Over Rough Terrain with Four 3D Printed Legs

We’ve seen some pretty fascinating 3D printing research in the medical field out of the University of California San Diego over the last couple of years, like a 3D printed blood vessel network. View the entire article via our website.

3D Printing News Briefs: September 22, 2018

In today’s 3D Printing News Briefs, we’ve got the speaker lineup for next month’s NAMIC Global Additive Manufacturing Summit in Singapore. Prusa and Cincinnati Incorporated are both. View the entire article via our website.

3D Printing Industry review of the year December 2018

3D Printing Industry

December brought developments in materials, software, and European Space Agency’s ambitious plans for interplanetary missions. Aerospace Advanced Manufacturing Center Autonomous Robotic Construction System Clément Jacquelin Devin Montes ESA european space agency Ford Lawrence Livermore National Laboratory Louisiana State University LulzBot TAZ 6 Meagan Moore S-Squared 3D Printers San Diego Shelby Mustang GT500 University of California UW Medical Cyclotron Facility WiDE Zortrax

Effect of Build Orientation on the Microstructure and Mechanical Properties of SLM 3D Printed Titanium

3D Printing 3D Printing Materials Metal 3D Printing build orientation California State University journal article microstructures Renishaw Renishaw AM250 additive manufacturing machine research paper selective laser melting Selective Laser Melting (SLM) SLM 3D printing titanium alloysOne of the challenges of 3D printing is the ability to get repeatable results, like good mechanical properties and identical microstructure, using different build orientations. A lot of research has.

SLM 58

Formalloy Releases Latest Metal 3D Printing System: L-Series Machine with Blue Wavelength Laser Technology

3D Printers 3D Printing 3D Printing Materials Metal 3D Printing blue laser california clad technology colorado copper alloy Formalloy laser laser 3d printing laser metal deposition Laser Metal Deposition (LMD) metal 3d printing nasa NUBURU Inc. Metal 3D printing company Formalloy, established last January in sunny San Diego, has been keeping very busy. In addition to developing and then showcasing its flagship A222 3D printer, which uses. View the entire article via our website.

LLNL Researchers First to 3D Print Aerospace-Grade Carbon Fiber Composites, Using a Modified DIW 3D Printing Process

California-based Lawrence Livermore National Laboratory (LLNL) has a 60-year history of applying technology and science to make the world a safer place, and has a vision to be the premier destination. View the entire article via our website.