Colorado State University Offers Online Foundations of 3D Printing Course, Open to Anyone Who Wants to Learn

3DPrint.com

3D Design 3D Printing 3d printing class 3d printing classes 3d printing college courses 3d printing courses 3d printing education Colorado State University digital badge Dr. David Prawel foundations of 3d printing Idea-2-Product 3D Printing Laboratory online course STEM education3D printing is many things, and one of them, much like the Internet, is a generational marker.

Wohlers Associates to Host Design for Additive Manufacturing Course in the Mountains of Colorado

Additive Manufacturing

Fort Collins, Colorado, USA, June 12, 2018 — Wohlers Associates, Inc. is bringing its internationally acclaimed course on design for additive manufacturing (DfAM) to the scenic town of Frisco , Colorado.

Trending Sources

Wohlers Associates adds to design for additive manufacturing course offering with America Makes

3D Printing Industry

Wohlers Associates, the Colorado-based additive manufacturing consultancy firm of industry advocate Terry Wohlers, has teamed up with America Makes to offer a new one-day course for managers and executives. Focusing on the unique principles of design for additive manufacturing (DfAM) the course will take place at America Makes headquarters in Youngstown, Ohio, on October 24, 2019.

Wohlers Associates partners with Materialise for Design for Additive Manufacturing course

3D Printing Industry

has announced a training course organised in conjunction with leading software and additive manufacturing enterprise, Materialise. The Fort Collins, Colorado based consulting firm. Wohlers Associates, Inc., Education airbus Terry Wohlers wohlers

Protolabs announces Designing for Additive Manufacturing course in partnership with Wohlers Associates

3D Printing Industry

Award winning on demand manufacturing provider Protolabs and Colorado-based additive manufacturing consultants Wohlers Associates have collaborated to run a Designing for Additive Manufacturing (DfAM) course. Taking place over three days, the course is an invitation-only event, established through a shared desire between the companies to help engineers and designers effectively use 3D printing technologies.

Wohlers Associates, Inc. – Design for Additive Manufacturing Course in Cooperation with Airbus and ZAL in Hamburg, Germany

Additive Manufacturing

Fort Collins, Colorado, USA, 16 April 2019 — Wohlers Associates, Inc. is taking its internationally acclaimed course on design for additive manufacturing (DfAM) to Hamburg, Germany. The course has received an overall average score of 4.7

Wohlers Associates and America Makes Offer Course on Design for Additive Manufacturing for Managers and Executives

Additive Manufacturing

Fort Collins, Colorado, and Youngstown, Ohio, August 28, 2019 — Wohlers Associates and America Makes are partnering to offer a one-day design for additive manufacturing (DfAM) course for managers and executives. Details on the course are available at this web page.

Wohlers Associates to Partner with Materialise on a Design for Additive Manufacturing Course in Belgium

Additive Manufacturing

FORT COLLINS, COLORADO, USA, April 18, 2017— Wohlers Associates, Inc., a consulting firm focused on additive manufacturing and 3D printing worldwide, today announced a three-day course on design for additive manufacturing ( DfAM ). Details on the course are available at [link].

3D Printing News Briefs: June 12, 2018

3DPrint.com

Get ready, we have a lot of news to share with you in today’s 3D Printing News Briefs, running the gamut from metal powder 3D printing and new software to education and a game response to the. View the entire article via our website.

DfAM in Germany

Wohlers Talk

Design for additive manufacturing (DfAM) is not easy. That’s why we have been offering DfAM courses since 2015. We have since conducted courses in other parts of the U.S., Our most recent course was held with Protolabs 2.5 Other DfAM courses are being planned.

DfAM

Wohlers Talk

Design for additive manufacturing (DfAM) is not easy. That’s why we have been offering DfAM courses since 2015. We have since conducted courses in other locations in the U.S., Our most recent course was held with Protolabs 2.5 Other DfAM courses are being planned.

Wohlers Associates Identifies Design as a Critical Factor in AM Economics and Adoption

Additive Manufacturing

Fort Collins, Colorado, USA, June 24, 2019 — Wohlers Report 2019 , an annual report on the additive manufacturing (AM) industry, includes detailed input from 127 providers of AM services worldwide. The second is a Design at Elevation DfAM course in Frisco, Colorado on September 11-13, 2019.

ADAPT Consortium Welcomes New Member Lithoz

Additive Manufacturing

Lithoz assists with ceramic printer install at Colorado School of Mines. Lithoz connected with ADAPT through a research collaboration with Professors Corinne Packard and Geoff Brennecka at Colorado School of Mines. There, it is being used for research and courses focused on AM technology and design for AM,” said Shawn Allan, VP of Lithoz America. “We Citrine Informatics, Colorado School of Mines, Faustson Tool, Lockheed Martin and Manufacturer’s Edge.

Inside 3D Printing – Seoul

Wohlers Talk

The optimized design, shown at the right, consolidates eight parts into one and was 3D printed by MJF in PA12. This improved design reduced weight from 575 grams (1.27 The previous example is what’s possible with methods of design for additive manufacturing (DfAM).

The Impact of DfAM

Wohlers Talk

In the last three years, organizations have begun to appreciate the importance of design for additive manufacturing (DfAM). Funding agencies are increasingly supporting DfAM, and companies are asking for courses on the subject.

SOLIDWORKS at the SCCA Run-offs at Indianapolis Motor Speedway: Day 2

The Solidworks Blog

And, on the other side are nice folks from Colorado. This party was started over 25 years ago at Mid-Ohio Sports Car Course to bring together all of the Production car drivers and team members to celebrate another Run-off.

Ahoy! Captain SOLIDWORKS!

The Solidworks Blog

Plotting a Course From Drummer to Boat Captain . I stopped playing music cold turkey, took a semester off, and went skiing in Colorado to clear my head and figure out what I was going to do,” Harper recalls.

Upcoming CATI Training Classes for August 2016 – Featuring SOLIDWORKS Drawings

CATI Tech Notes

In addition to the complete catalog of course offerings from these partners, CATI has developed unique classes to meet the needs of our customers. These courses are setup as ½ day sessions that you can take using your own computer with fast internet connection and a phone.

An Expert in Growing Plants – and Business – with Help from 3D Printing

Afinia

Jason Rider is the Founder of Thriving Systems Design, LLC and inventor of the C-Bite Stake Coupling and Anchor System. I don’t have a design background, but the Afinia software is easy to use. Once I got the design to a certain point, I took it to a company for manufacturing.

Virginia Tech to Host University-Wide, Second Annual 3D Printed Vehicle Competition

Additive Manufacturing

18, 2015 – Virginia Tech will launch today the second annual Spring Additive Vehicle DesignChallenge ( [link] ), a competition for students to design a remote-controlled 3-D printed vehicle that can drive on ground and fly in the air. Air Force Academy, based in Colorado Springs, Colorado.

How 3D Printing Fuels STEAM Education

Stratasys Blog for a 3D World

Now more than ever, artists, designers, musicians, and writers are using STEM to find new mediums in which to work, inspiration to draw upon, and tools to hone their crafts. “As Darlene Farris-Labar, Associate Professor of Art and Design using 3D printing to bring Science to life.

Upcoming CATI Training Classes for May 2016

CATI Tech Notes

The classroom courses are offered at one of the 10 training centers we have in the Midwest. With our recent merger with MCAD, we have 5 additional training centers in Colorado, New Mexico, Washington and Oregon. Design Tables and Equations.

Upcoming CATI Training Classes for July 2016

CATI Tech Notes

The classroom courses are offered at one of the 10 training centers we have in the Midwest. With our recent merger with MCAD, we have 5 additional training centers in Colorado, New Mexico, Washington and Oregon.

LulzBot Mini 2 Review

3D Printing Hub

The LulzBot Mini 2 is an improved version of the original Mini from Aleph Objects, an American company operating from Colorado. While it retains the compact and rigid design of its predecessor, the Mini 2 is a very different machine, boasting a host of improvements, including a modular print bed, a slightly larger build volume , and an onboard LCD interface with SD card connectivity. The Design. Overall, the Mini 2 has an excellent design.

Best Workhorse 3D Printers: The Most Reliable 3D Printers

3D Printing Hub

It’s loaded with convenient features designed to make 3D printing easy for everyone and prints really well in different settings. Default spool holders designed for FlashForge racks. In design, the M2 is similar to the TAZ 6. Of course, the Ultimaker 2+ is not without flaws.