3DEXPERIENCE Modeling & Simulation Conference: Keynote by Skunk Works & Executive Roundtable

3DPrint.com

Last week, Dassault Systèmes, the 3DEXPERIENCE software company, held the 3DEXPERIENCE Modeling & Simulation Conference in Michigan. I was invited to attend the event, which was held from. View the entire article via our website.

3DEXPERIENCE Modeling & Simulation Conference: Finn Mast Project & Guest Speaker Dr. Byron Pipes

3DPrint.com

Recently, Dassault Systèmes, the 3DEXPERIENCE software company, held its 3DEXPERIENCE Modeling & Simulation Conference. 3D Printing 3D Printing Events 3D Software 3D modeling 3D printed sailboat parts 3D printed sailing components 3d simulation 3dexperience 3DExperience platform Byron Pipes CATIA conference Dassault Systèmes digital twin digital twins Factory of the Future MODSIM olympic games olympics purdue purdue university simulation software SIMULIA

Trending Sources

Dassault Systèmes Introduces SOLIDWORKS 2020 Release at Modeling & Simulation Conference

3DPrint.com

3D Printing 3D Printing Events 3D Software.3mf 3d simulation 3d slicing 3dexperience 3DEXPERIENCE 3D Software Platform 3DExperience platform 3DEXPERIENCE.WORKS 3mf file format Dassault Systèmes Enovia geometry new software release SIMULIA solidworks SOLIDWORKS 2020 SOLIDWORKS 3DEXPERIENCE PLM Services SOLIDWORKS PDMAt SOLIDWORKS 2019 in Dallas, Dassault Systèmes revealed a lot of features the company was working on for its upcoming SOLIDWORKS 2020 release.

Cleaning up our oceans with simulation

3D Perspectives

CLEANING UP OUR OCEANS WITH SIMULATION. Bénédicte Dommergues, a modeling engineer at The Ocean Cleanup, presented their achievements with XFlow at the 2017 XFlow User Conference held in Madrid, Spain. BRUNO SAINTE-ROSE, Lead Computational Modeler, The Ocean Cleanup.

World-Class Leaders in Business and Technology to Speak at 2019 Global Altair Technology Conference

Additive Manufacturing

The conference will begin on October 10 with featured keynotes from brands at the forefront of innovative business practices including Biomimicry 3.8, Prior to the Global ATC, Altair will be hosting a model-based development symposium on October 9 at the MGM Grand Detroit. Biomimicry 3.8,

Snow Tire Simulation: Where the Virtual Rubber Meets the Road

The Solidworks Blog

It turns out that SIMULIA’s FEA simulation software is used by nearly every tire manufacturer in the world to simulate realistic tire performance such as inflation, rolling resistance, noise, tire-road contact, hydroplaning and even behavior of the tire during anti-lock braking!

2016 RAPID Additive Manufacturing Conference Preview

Stratasys

It’s the largest, longest-running and one of the most credible conferences on additive manufacturing in North America. Using Additive Manufacturing for Spare Part Supply: A Preliminary Model-Based Analysis.

Join us at the 2014 Offshore Technology Conference

The Solidworks Blog

The Offshore Technology Conference (OTC) is the biggest event in the oil & gas industry, and this year’s show takes place May 5-8 at the Reliant Center in Houston, TX. offers complete 3D software tools that let you create, simulate, publish, and manage your data.

Second International Conference on Electron Beam Additive Manufacturing EBAM 2018

Additive Manufacturing

The second International Conference on Electron Beam Additive Manufacturing EBAM 2018 will take place from 11 – 13 April 2018 in Nuremberg, Germany. 2nd International Conference on Electron Beam Additive Manufacturing. Modeling and simulation. Conference fee.

The 1st Munich Technology Conference Shows the Way Forward for Additive Manufacturing

Additive Manufacturing

As the first of a new conference series, the event will highlight key aspects of digital transformation in industry in one of Europe’s most innovative cities. Details on the conference program and the speakers can be found at www.oerlikon.com/am/#!mtc-event.php.

1st International Conference on Electron Beam Additive Manufacturing EBAM 2016

Additive Manufacturing

1st International Conference on Electron Beam Additive Manufacturing EBAM 2016. The first International Conference on Electron Beam Additive Manufacturing EBAM 2016 will take place in Nuremberg, Germany. Modelling and simulation. Conference Coordinator.

Simufact to Introduce Third Generation of its Metal Additive Manufacturing Simulation Software

Additive Manufacturing

Multiple Parts: Simultaneous Simulation of Multiple Parts in the Build Space. Thereby, the software is now available for simulations on Linux computers for instance on high performance Linux clusters. Users can also compare simulation results and reference models (e.g.,

EBAM 2016 – 1st International Conference on Electron Beam Additive Manufacturing

Additive Manufacturing

The 1st International Conference on Electron Beam Additive Manufacturing EBAM 2016 organized by the Chair of Metals Science and Technology ( WTM ) and the Cluster of Excellence of Advanced Materials ( EAM ), both institutions of the Friedrich-Alexander-Universität Erlangen-Nürnberg , will take place in Nuremberg, Germany. The conference aims to discuss specific challenges and opportunities offered by the electron beam. EBAM 2016, Nuremberg, Germany.

American Business Conferences (ABC) Presents an Insightful Q&A Session with Gerd Manz, VP Technology Innovation adidas Group

Additive Manufacturing

American Business Conferences ( ABC ) is a world-leading provider of content driven, information rich business summits that provide unlimited opportunities for individual learning and commercial deal making.ABC About American Business Conference.

Simufact to Launch Process Simulation Software Solution for Metal Additive Manufacturing

Additive Manufacturing

Hamburg, Germany, September 9, 2016 – Simufact Engineering , an MSC Software company and expert in manufacturing process simulation, has announced the launch of Simufact Additive , a ground-breaking new software solution for the simulation of metal additive manufacturing processes.

Surgeons Can Now Practise Surgery on These Amazing 3D-Printed Hearts

3D Printer

Previous attempts at producing printable models required extensive manual involvement from human experts to determine the boundaries of individual MRI cross sections – hundreds of which can make up a full scan – blowing out the time it took to consolidate the data. Absolutely, a 3D model would indeed help,” said Sitaram Emani, a cardiac surgeon at Boston Children’s Hospital, who was not involved with the research. “We

Boston 213

ASME’s AM3D – Discover the ENGINEERING Behind Additive Manufacturing & 3D printing

Additive Manufacturing

ASME’s Additive Manufacturing + 3D Printing Conference & Expo (AM3D ), is designed specifically for the Engineering community. Conference Highlights Include: Three-days of keynote talks, technical presentations, panel sessions and peer-to-peer interaction. Understanding MBD and MBE: Realizing the Promise of 3D Workshop: This workshop will present an overview of 3D Model-Based Definition (MBD) in the context of a Model-Based Enterprise (MBE).

EBAM 2016 – FINAL Call for Abstracts – Deadline extension until 25 January 2015

Additive Manufacturing

The first International Conference on Electron Beam Additive Manufacturing EBAM 2016 will take place in Nuremberg, Germany. The conference aims to discuss specific challenges and opportunities offered by the electron beam. 1st International Conference on Electron Beam Additive Manufacturing EBAM 2016. Modelling and simulation. Further information on abstract submission and registration is provided on the conference website. Conference Coordinator.

SOLIDWORKS World 2017 Agenda Now Live

The Solidworks Blog

Maybe you’d like to become the in-house expert on simulation or model-based definition (MBD)? Topics will range from PCB and electrical design, rendering, flow simulation and MBD to simulation and product data management. You can find a full conference agenda online here.

More Than 15 Reasons to Attend SOLIDWORKS World 2016 #SWW2016

CATI Tech Notes

If you are not familiar with SOLIDWORKS World it is SOLIDWORKS annual 3 day conference that you can join more than 5,000 of your peers and select from more than 200 breakout sessions on topics ranging from design automation and electrical design to simulation and product data management. Session Description: This session is a hands-on test drive that will cover view creation within Composer™ using SOLIDWORKS-native models of a Lego® blocks truck.

JEC Americas 2014 in Partnership with CATIA – October 28, 29 in Boston

3D Perspectives

And we are glad to offer free entry to conference sessions and after-hour events. The Simulation theme is the focus throughout the whole event, thanks to the Conferences , the Simulation Composite Circle and the Simulation Innovation Awards that will take place.

Boston 108

MIT- Customizing 3-D Printing

Additive Manufacturing

Researchers at MIT and the Interdisciplinary Center Herzliya in Israel aim to change that, with a new system that automatically turns CAD files into visual models that users can modify in real time, simply by moving virtual sliders on a Web page.

SOLIDWORKS World 2018 Agenda is Now Live

The Solidworks Blog

Maybe you’d like to become the in-house expert on model-based definition (MBD) or designing products for the IoT? To make it easier for those who are already registered to attend SOLIDWORKS 2018, online session scheduling is now available for full conference registrants.

Who Wants a SOLIDWORKS World 2018 T-Shirt?

The Solidworks Blog

Here’s what Buddy from Fountain Valley has to say about his winning design: It has a California bear cruising back to the exciting and creative city of Los Angeles for another great conference. You a Model Mania champ?

What’s New In SolidWorks 2016

CAD Fanatic

Simulation – Mesh Sectioning. Simulation – Release Prescribed Displacements. Model Based Definition (MBD). DISCLOSURE: DS SolidWorks Corp paid for my conference fee, lodging, and some meals.

RAPID + TCT 2018 – Additive Manufacturing/3D Printing and Bioprinting

Additive Manufacturing

At the conference, you will find in-depth sessions covering design and manufacture of implants, dental devices, tissues, and more using a variety of additive manufacturing technologies. The use of 3D printing has impacted patient care for many years, from anatomical models to new patient-matched devices. MMI 2017 Conference Schedule.

Reflecting on SOLIDWORKS Worlds over the Years

The Solidworks Blog

This announcement made me reflect on all the SOLIDWORKS WORLD conferences I’ve been to over the years. Three of my favorite things about SWW are Model Mania, the “What’s New” skit, and the CSWE event. Model Mania. Every year the model is different.

Dassault Systèmes BIOVIA and SIMULIA CEOs Gear Up for Science in the Age of Experience – Boston, May 23-25

3D Perspectives

As Dassault Systèmes gets ready to launch its Science in the Age of Experience conference in Boston next week, we caught up with CEOs of the two Dassault Systèmes software brands that will be the focus of this new gathering of the scientific community.

TIECON East Brings Together Makers and Shapers

The Solidworks Blog

TIECON EAST is a full day conference that brings together the people, companies and sectors that fuel the innovation economy. offers complete 3D software tools that let you create, simulate, publish, and manage your data.

HI-AM Network – At the Forefront of Tangible Breakthroughs in AM Capabilities and Processes

Additive Manufacturing

This year the HI-AM Conference will be held at The University of British Columbia, Vancouver, Canada, 26-27 June 2019. HI-AM 2019 Conference. This must be an exciting time with HI-AM Conference next month. that will have representatives in the conference.

Manufacturing in the Age of Experience Spotlights Sustainable Manufacturing

3D Perspectives

Congratulations to Guillaume Vendroux, CEO of Dassault Systemes’ DELMIA brand and the entire event team for an outstanding conference. Orchestrating the value network —modelling collaboration, transparency and efficiency to serve a fast changing, ever more complex market.

China 67

JEC World 2016 and Dassault Systèmes : Composites Disruptive Technologies

3D Perspectives

Either visiting the 3DS booth or attending the Design in the Age of Experience conference cycle, they could discover the value that our 3DEXPERIENCE platform for Composites and Additive Manufacturing provide to their business: Extend & Strengthen the Composites Value Chain.

SOLIDWORKS World 2016 Agenda is Now Live

The Solidworks Blog

Topics will range from design automation and model-based definition (MBD) to simulation and product data management. To make it easier for those who are already registered to attend SOLIDWORKS 2016, online session scheduling is now available for full conference registrants.

Dallas 106

Formlabs will 3D Print Your Custom Parts for SOLIDWORKS World

The Solidworks Blog

Bring your 3D models to life at SOLIDWORKS World 2018! For the first time ever, every conference attendee has the opportunity to submit and receive custom 3D-printed models from Formlabs.

The Most Versatile 3D Printing Solution for Personalized Medicine Is Now Validated with an FDA Cleared Software

Stratasys Blog for a 3D World

Surgeons are increasingly incorporating 3D patient-specific models (PSMs) into their decision-making process to better understand, plan, and practice a complex surgery — and then explain it to the patient and their family.

Why SOLIDWORKS World is More Like a Family Reunion

The Solidworks Blog

Some of my coworkers were modeling a helix to display the springs in the model assemblies. Unfortunately, this is one of the last things you would want in an assembly model. This insight became a gigantic timesaver and reduced the size of the model significantly.

We Blinded Them with Science

3D Perspectives

Simulation and design become one on the #3DEXPERIENCE platform @3DS_SIMULIA Bruce Engelmann R&D pic.twitter.com/LDqlsCaqCA. Modeling and simulation is changing the way we develop new treatments and devices – Bill Murray of @MDIConline #3DEXPERIENCE pic.twitter.com/bnzqCT6li8.