ISIS-Destroyed Museum in Iraq Revived by Crowdsourcing and 3D Printing Technology

3DPrint.com

3D Printing 3D Scanners 3d printed archaeology 3d printed artifacts 3d printed history 3d printed museum exhibits 3D printed museum pieces destroyed by ISIS Economist Media Lab iraq ISIS mosul museum Museum of Art and Design New York photogrammetry Rekrei syria vrThere’s no better way to enrich ourselves with human history than by immersing ourselves in it, visiting the museums and historical sites across the world that tell the story of where we’ve all come.

Iraq 63

The Million Image Database Project: A ‘Flood’ of 3D Cameras to Turn the Tide Against ISIS Vandals

3DPrint.com

3D Design 3D printed art 3D Printing 3D Scanners 3d printed art 3d printing restoration iraq ISIS middle east Million Image Database Project mosul museum Roger Michel syrian crisis terrorism vandalism of historical sites virtual restoration

Iraq 87

Trending Sources

Proposal Uses 3D Printing to Rebuild Mosul

3DPrint.com

3D Design 3D Printing 3d printed architecture 3d printed bridges 3d printed construction 3d printed houses 3d printing in the middle east historical preservation iraq ISIS middle east Mosul Vincent Callebaut ArchitecturesThis year, the Iraqi army defeated the Islamic State in Mosul. ISIS took over the city in June 2014 and held it for three years until the army pushed them out. It was a great day for the inhabitants. View the entire article via our website.

Iraq 60

3D Printing News Briefs: April 7, 2017

3DPrint.com

In today’s 3D Printing News Briefs, medical technology firm axial3D has secured over £530,000 in seed funding, while four University of Bristol graduates are on their way to China with their. View the entire article via our website.

China 57

Missouri Teen 3D Prints Prosthetic Arm for His Dad

3DPrint.com

When Robert Frei’s dad returned from his tour of duty as a Marine in Iraq, he wasn’t the same. 3D Design 3D Printing Education Medical 3D Printing Science & Technology 3d printed prosthetics arm prosthetic custom prosthetic e-nable limb difference marines Missouri prosthetic prosthetics robbie frei robert frei rpg attack st. Specifically, he was missing the lower part of his right arm that had been injured in a. View the entire article via our website.

Shining 3D – Save The World Art Project

Afinia

3D Printers and Printing 3D Scanning Art & DesignPorcelain Rabbit Restoration. Shining 3D, the manufacturer of the EinScan-Pro Handheld Scanner and the ES360 Desktop 3D Scanner are on a mission to capture the world’s museum treasures as 3D scans.

Art 67

3D Printing for Development in the Global South: How Localized Manufacturing Can Benefit Poor Communities By Causing Positive Social Change

3D Printing for Beginners

From the international 3D4D Challenge in 2012 to social enterprises in India, Haiti and Iraq, Thomas Birtchnell and William Hoyle delve into the world of 3D printing for development in the Global South. While visiting the FabCon 3.D

Haiti 217

DIMENSIONEXT: 3D Printing The Devil's Chair

Dimensionext

Designer Rendy Himawan s take on the concept of the devil is that we all have a part of use that wants to be impolite, and perhaps downright evil. Imam Buchori, and he said that design should be able to give a social message to society. Pages. SECTOR NEWS. REPORTS. REVIEWS. SEARCH.

BPC's Day at the White House Maker Faire

Tales of a 3D Printer

Dula Parkinson , Beamline Scientist, for patiently mentoring me during my IISME summer 2013 internship and having the vision to design and implement our November 2013 ALS experience, as well as his continued support through the data analysis / printing process.

Will this one-armed robot put you out of a job?

Design 2 Part News

military in Iraq. Sawyer’s unusual one-arm design came after analyzing over 150 factory tasks, and finding many could be done with just a single limb. By Sheena McKenzie, CNN Tech. Sawyer the one-armed robot can do many things.

Iraq 61

U.S. Senator Udall Advances Funding for Construction at NM Military Bases, NM Veterans

Additive Manufacturing

The existing fitness center was designed for half the population now stationed at Cannon and does not meet current training needs.

Special report: Automation puts jobs in peril

Design 2 Part News

Two years after earning a fine arts degree from Towson University with a specialty in interdisciplinary object design, she now spends her work days working with a personality-free machine with a name to match: a computer numerical control, or CNC, router. By Nathan Bomey, USA Today.