Long Beach Has a New and Very Innovative 3D Printed Key to the City

3DPrint.com

3D Design 3D printed art 3D Printing 3d printed keys california CSU Long Beach David Hedden DW Ferrell Gabriel Gaete key to the city Long Beach Long Beach Public Library's MakerSpace Long Beach Technology and Innovation Commission Robert Garcia The StudioA key to the city is frequently given away as token of a person’s contribution to making that city a better place.

WESTEC – First-Hand Insight into the Latest Technologies Revolutionizing the Industrial Sector

Additive Manufacturing

This year WESTEC will be held in a new location at the Long Beach Convention Center, Long Beach, California. WESTEC 2019 Long Beach Convention Center 300 E. Long Beach, California 90802 USA 24-26 September 2019.

Trending Sources

Design-2-Part Shows Announce 2018 Schedule

Design 2 Part News

November 7, 2017 – Design-2-Part (D2P) Shows, America’s largest design and contract manufacturing tradeshows, is pleased to announce their 2018 show schedule. Long Beach Convention Center, Long Beach, CA.

The RAPID Manufacturing Challenge for 3D Systems

3D Systems

The RAPID Manufacturing Challenge for 3D Systems Friday, May 15, 2015 - 09:33 We bring our products to market to help engineers and designers overcome challenges, so every now and then we like to put them to the test to self-check.

AeroDef Manufacturing 2019: Technology Breakthroughs Transforming Manufacturing

Additive Manufacturing

Conference returns to Long Beach in April 2019. The event takes place April 29 to May 2 at the Long Beach Convention Center, Long Beach, California. By SME Communications.

SME-Participate in SME’s 2015 Design for Direct Digital Manufacturing Competition Where Structures Rule!

Additive Manufacturing

The virtually unlimited design freedom enabled by additive manufacturing allows the optimization of form, fit and feature/function often not possible by other means. Featured News Additive Manufacturing SME SME''s 2015 Design for Direct Digital Manufacturing Competition

AeroDef 2018 – Experience All Things Additive Manufacturing (AM)

Additive Manufacturing

Long Beach Convention Center. Long Beach, California USA. Design Considerations for Additive Manufacturing I & II. Additive Manufacturing via Simulation-Driven Design.

BATTLEBOTS LIVE! Behind the Scenes

The Solidworks Blog

We arrived at the studio in Long Beach, CA, two hours early, and the line to get in was already stretched across the parking lot. We were hungry after a long drive, so thankfully there was a food cart with hotdogs and bottles of water for folks waiting to get in.

Paper and color–a natural for 3D printing

Leslie's Blog

At the recent RAPID Conference in Long Beach, Calif., SliceIT powers the IRIS HD by providing new algorithms and supporting the newly-designed, 10,000 meter carbide cutting tip. Additively making parts using ordinary paper as the build material is a bit deceptive.

3DP Unlimited offers large-scale 3D printer for sub $400 monthly lease

3D Printing Review

LCA and 3DP will work with each organization—from manufactures and service providers to designers and schools—to develop tailored financing that allows them to quickly obtain their own 3DP1000 at a low monthly price.”

Purple Platypus and Stratasys Partner with CSULB to Open New I-Space Facility

Purple Platypus

On August 23rd, with the support of Purple Platypus and Stratasys Ltd, California State Long Beach opened the doors of their new Innovation Space (I-Space) facility that holds the latest innovations in the additive world such as the new generation Stratasys J750. “I

RAPID 2015-The Most Additive Manufacturing Experts All in One Place

Additive Manufacturing

Long Beach Convention Center. Long Beach, California USA. Explore how other organizations are using the technologies to revolutionize product designs, cut costs, reduce time to market, eliminate tooling, and more.

Advancing Education with an Innovation Space Built with Additive in Mind

Stratasys Blog for a 3D World

California State University Long Beach has just opened a new Innovation Space (I-Space) Facility with the help of our partners in southern California, Purple Platypus. Kline I-Space is a state of the art design and engineering lab located in the University’s newly designed library and features an interdisciplinary design facility. Stratasys J750 Polyjet Technology at the new California State University Long Beach Innovation Space.

Revolutionizing Composite Tooling with Stratasys 3D Printing

Stratasys Blog for a 3D World

On display was a full range of tooling solutions for high-end manufacturing applications that demonstrated how 3D printing can replace traditional hard tooling technologies – eliminating labor, waste and long lead times. Designing tools using the most effective methods of construction.

Tools 83

Impressive 3D Printing Products at RAPID 2015

3D Innovations

The RAPID 2015 Conference & Exposition in Long Beach, CA displayed numerous new 3D printing products and hosted an array of industry leaders speaking extensively about the technology. Design News recently posted a slideshow, 12 New & Notable 3D Printing Products from RAPID 2015 , which gives great examples of the additive manufacturing technology showcased and where the technology is heading.

3 Things You Shouldn’t Miss at AeroDef Manufacturing 2018

Additive Manufacturing

LONG BEACH, Calif., March 13, 2018 – SME ’s AeroDef Manufacturing event takes place March 26 to 29 at the Long Beach Convention Center.

AeroDef Manufacturing with Composites Manufacturing Event Features Best Strategic Thinkers in the Industry

Additive Manufacturing

Aerospace and defense conference and exhibition returns to Long Beach in February 2016. 8 to 10 at the Long Beach Convention Center. The Design, Development and Delivery of the James Webb Space Telescope”.

Mcor Technologies to Inform RAPID 2015 Attendees How to Save 80% on 3D Printing and Prototyping Costs

Additive Manufacturing

This low cost enables wider accessibility of the technology and therefore, greater innovation and better designs. Where: Long Beach Convention Center, Long Beach, CA.

MCOR 52

SME’s RAPID Conference & Exposition Celebrates 25th Anniversary in 2015

Additive Manufacturing

The authority on 3D Printing, Scanning and Additive Manufacturing to be held in Long Beach, California. RAPID 2015 will mark the 25th anniversary for the conference and exposition, and it will be held May 18-21, 2015 , in Long Beach, California , at the Long Beach Convention Center. Submissions for current and still-to-be-created art for RAPID 2015’s gallery and puzzle designs will also be accepted through Dec.

SME RAPID 2015-Day 3 Highlights and Notables

Additive Manufacturing

Long Beach Convention Center. Long Beach, California USA. From the exhibit floor: AutoDesk has released the Print Studio Ember design file. The M2 is equipped with a new filter design that is five times larger but the overall machine footprint is smaller.

Mcor Technologies is the First to Bring High Definition Color to 3D Printing, Transforming Mcor IRIS into an HD 3D printer

Additive Manufacturing

LONG BEACH, Calif., Mcor will demonstrate Mcor IRIS HD today through Thursday at the RAPID conference for 3D printing, scanning, and additive manufacturing at the Long Beach Convention Center in California. Mcor IRIS HD also reduces per model printing cost by 20 percent.

MCOR 63

Stratasys Showcases New 3D Printing Solutions for Composite Tooling at SAMPE

Stratasys Blog for a 3D World

Stratasys is presenting new 3D printing solutions for composite tooling at SAMPE 2016 this week in Long Beach, CA – introducing composites manufacturers to new operational efficiencies, greater design freedom and faster time to market.

EXCLUSIVE – Dave Morton of SME Highlights AeroDef Manufacturing

Additive Manufacturing

Long Beach Convention Center. Long Beach, California USA. Manufacturers can create virtual prototypes of an engine or car interior that allows designers and engineers to walk around and experience—cutting the considerable time and expense required by physical models.

Spotlight on Becher Neme: BIM Expert Pushes a Zero-Change-Order Approach

3D Perspectives

The team that makes up Neme Design Solutions , a Long Beach, California-based BIM consultancy, specializes in simplifying highly complex projects to enable fabrication. To do so, Neme Design Solutions has explored the single-source model concept.

The Handy Man – Grayson Galisky

Stratasys Blog for a 3D World

Every year, the Extreme Redesign Challenge calls upon tomorrow’s engineers, artists and entrepreneurs to design a better future. It is a test to see who can come up with the most creative, mechanically sound, and realistically achievable design using 3D printing.

SME’s RAPID 2015: Largest 3D Printing Event to Date

Additive Manufacturing

April 9, 2015) – SME’s 2015 RAPID Conference & Exposition , the largest in the event’s history, will be held next month in Long Beach, Calif. The RAPID show floor is designed to optimize interaction among exhibitors and attendees.

RAPID 2015-Embracing Breakthroughs that Move Business Forward

Additive Manufacturing

This year RAPID 2015 will be held in Long Beach California, May 18-21, 2015 and will mark the 25 th anniversary for the conference and exposition. Long Beach, California USA. Everything from design to the materials needed to complete an additive process.

RAPID-Unrivaled Authority on 3D Knowledge

Additive Manufacturing

Long Beach Convention Center. Long Beach, California USA. The morning session will focus on new approaches, application in investment casting, and design-related topics. Design Considerations for Additive Manufacturing.

Stratasys Reshaping Aerospace, Education, Entertainment and More at RAPID 2015: Exclusive Video Interviews!

Stratasys Blog for a 3D World

RAPID celebrated its 25 th anniversary in Long Beach, California. William Harding, ULA Program Director, added, “We can design parts on our rockets to go into space that are plastic, instead of traditional metal material.

ARC & Link3D Announce Partnership At AeroDef to Enable Standards Compliance Through Additive Manufacturing Workflow Software

Additive Manufacturing

Long Beach, CA — May 1, 2019 — At this year’s Aerodef event, Link3D , a New York-based additive manufacturing software company is excited to announce its partnership with Additive Rocket Corporation (ARC), a California high performance and ultra-low cost additive manufacturing rocket engine company. Engineers were designing for manufacturability.

Mcor Technologies unveils new SliceIT Software

Additive Manufacturing

LONG BEACH, California, May 20, 2015 – Mcor Technologies Ltd , manufacturer of the only line of desktop paper-based 3D printers, today announced the availability of new SliceIT print driver software for the company’s IRIS and Matrix 300+ line of SDL (selective deposition lamination) 3D printers.

MCOR 66

Trump hypes jobs relocating back to the US. Are they?

Design 2 Part News

Tariffs were designed, in part, to drive some American manufacturing away from China, although most likely, tariffs work won’t shift work to the US, but to other low-cost Asian nations. American companies are also taking the long view.

China 56

AeroDef®-Bringing Together Leading Aerospace and Defense Manufacturing Companies and Leaders to Highlight Technology Options and Trends

Additive Manufacturing

Long Beach Convention Center. Long Beach, California USA. Over the past few years we’ve heard about the use of composites and advanced materials in aerospace design, such as the Boeing 787 Dreamliner and Airbus A350 XWB. By SME.

SENVOL: Selecting the Most Cost-Effective Location for Additive Manufacturing (AM) Production

Additive Manufacturing

He is published in top industry journals, has presented at numerous conferences, and has written papers and business cases on how companies can incorporate additive manufacturing into their long term business strategy. design, manufacturing, supply chain) impact the company’s bottom line.

MMI at RAPID 2015-Latest Medical Applications and Technology Improvements While Addressing Integration of 3D Imaging, Software and Process Validation for Almost All Regulatory Bodies

Additive Manufacturing

Long Beach, California USA. Lauralyn : In the last couple of years, we have seen a significant increase in the number of vendors participating and the number of long-time vendors highlighting use in medical applications.

SABIC-Investing Globally in Capabilities and Equipment to Support the Development of High Performance Materials for Additive Manufacturing Processes and Other Emerging Technologies

Additive Manufacturing

At this year’s RAPID Conference and Exposition held in Long Beach, California, Elizabeth Jordan , Ph.D. During the discussion, you suggested materials will drive the additive manufacturing industry, more so than design, equipment or processes.

The U.S. Cities Where Manufacturing Is Thriving

Design 2 Part News

As with our other rankings in this series, the list is based on employment growth in the sector over the short-, medium- and long-term, going back to 2005, and we factor in momentum — whether growth is slowing or accelerating. 27 Los Angeles-Long Beach. By Joel Kotkin, Forbes.