World’s First 3D Printed Volumetric Circuit Emerges from University of Texas El Paso Lab

3DPrint.com

Rumpf, PhD, the Schellenger Professor in Electrical Research in The University of Texas at El Paso’s College of Engineering. 3D Design 3D Printing 3d printed circuits 3d printed electronics University of Texas at El Paso volumetric circuitA great many discoveries have been made in the lab of Raymond C. Dr. View the entire article via our website.

The “Texas Breather”: TTUHSC El Paso and UTEP Develop a Low-Cost, 3D-Printed Ventilator for Hospitals

Additive Manufacturing

EL PASO, Texas – Nationwide, hospitals are concerned about a possible shortage of ventilators as more Americans require treatment for COVID-19, the novel coronavirus disease that can cause life-threatening respiratory problems such as pneumonia.

University of Texas at El Paso: 3D Printed Electrodes Show Promise Via DLP Processes

3DPrint.com

In ‘3D Architecture Electrodes for Energy Storage Applications,’ Seong hyeon Park explores the demand for harnessing and keeping energy, and especially on the micro-scale. Although micro-scale. View the entire article via our website. 3D Printing 3D printed electrodes 3D printed energy storage

America Makes Congratulates The University of Texas at El Paso (UTEP) and Its W.M. Keck Center for 3D Innovation on Partnership with Aconity3D

Additive Manufacturing

America Makes proudly extends its congratulations to The University of Texas at El Paso ( UTEP ), a Platinum-level member of the Institute, and UTEP’s renowned W.M. Their superior technical excellence in additive manufacturing, outstanding educational program, and proven ability to have a positive impact on the El Paso region are well known and are the key differentiators that set them apart when we too selected them to be our first Satellite Center.

NIST Awards $4M to Four Institutions for Metal 3D Printing Research

3DPrint.com

The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST), a non-regulatory agency that promotes innovation and industrial competitiveness across the country, has. View the entire article via our website.

University of Texas Researchers Investigate Finer Details of EBM Powder Removal

3DPrint.com

Researchers from the University of Texas at El Paso explore EBM powder removal in the recently published ‘Analysis of Powder Removal Methods for EBM Manufactured Ti-6AL-4V Parts.’ 3D Printing 3D Printing Materials Featured Stories electron beam powder bed fusion (EBPBF) Powder Removal Methods for EBM University of Texas at El Paso

Texas 40

UTEP Top Research Centers Announce Plans for Youngstown Expansion

Additive Manufacturing

The University of Texas at El Paso is one of the largest and most successful Hispanic-serving institutions in the country, with a student body that is over 80% Hispanic. Source: The University of Texas at El Paso.

The R&D Tax Credit Aspects of 3D Printed Telecommunications

3DPrint.com

3D Printing Aerospace 3D Printing Business 3d printed fiber optics 3d printed satellite parts 3D printing tax credits communication fiber optics microwaves Poly-Shape Space Systems Loral tax credits telecom Thales Alenia Space University of South Florida in Tampa university of sydney University of Texas at El Paso

Aconity3D to Set Up North American Base of Operations for 3D Printing at UTEP

3DPrint.com

The University of Texas at El Paso (UTEP) has long been a 3D printing advocate, and a lot of this important work takes place at the university’s W.M. 3D Printing Business Metal 3D Printing 3D printed metal components 3d printing business news Aconity3D agreement keck center laser 3d printing Laser Powder Bed Fusion Additive Manufacturing metal powder 3d printing north america partnership University of Texas at El Paso utep utep 3d printing W.M.

America Makes Completes Pilot of Virtual Additive Manufacturing Educational Program for Middle School Students

Additive Manufacturing

Fab Lab El Paso, El Paso, Texas. Program Prepares Students for 3D Printing Career Opportunities.

Tulsa 52

Researchers at UTEP 3D Print Drone with Electronics Already Embedded Within

3DPrint.com

3D Printing 3d printed electronics 3d printing technology research research and development UAV University of Texas El Paso utepThe allure of 3D printed drones is very strong. A large number of projects have been completed recently all over the world which build on the excitement of this combination of technologies. While printing the frame,... View the entire article via our website.

Researchers 3D Print Microscopic Light Beam Guides, A Step Towards Super Fast Computing

3DPrint.com

3D Printing 3d printed data 3d printed electronics 3D printed microscopic light beam guides ecb light light beam guides microscopic 3D printing ucf university of central florida University of Texas El Paso utep Recent innovations in using microscopic 3D printed guides to manipulate light carrying data give the information highway a whole new concept of speed and efficiency.

Keck Center at UTEP Receives Grant to Advance Metal 3D Printing

3DPrint.com

3D Printing Metal 3D Printing 3D printing grants University of Texas El Paso utep W.M. The research into metal 3D printing never ends, as scientists work to discover what factors go into the creation of defects in metal 3D printed parts – and what can be done to eliminate those. View the entire article via our website. Keck Center for 3D Innovation

Comparing Rectangular and Lattice Structures in 3D Printing Bioinks

3DPrint.com

3D Printing Science & Technology 3d bioprinting 3d printed lattice 3d printed lattice structures 3D printing bioink Allevi BioBot 1 3D printer Bioink for 3D printing comparative research journal article research paper riken study The University of Texas at Austin tissue engineering University of Texas at El Paso

UTEP Receives $2.1 Million America Makes Grant to Develop All-in-One Electronics 3D Printer

3DPrint.com

3D Printers 3D Printing Business 3d electronics printer 3d electronics printing 3d printed electronics 3d printed electronics circuits 3d printing electronics america makes america makes grant David Espalin embedded electronics Ryan Wicker University of Texas at El Paso utep W.M. The purpose of the America Makes accelerator is to drive innovation and the advancement of additive manufacturing technology in all of its forms. Officially, they act as a go-between for existing.

3D Printing Put to Use to Create More Sensitive Strain Gauges for High-Temperature Applications

3DPrint.com

3D Printing Science & Technology 3d printed devices 3d printed sensors 3d printed strain gauge 3d printed strain sensors 3D printing methods aerosol jet 3d printing Aerosol Jet technology aerosol jetting Carnegie Mellon University cmu high temperature journal article optomec research paper strain sensors University of Texas at El Paso Washington State UniversityWhat’s one major thing that airplanes, bridges, and weigh stations have in common?

America Makes Announces the Seven Awardees of Their Fourth Project Call

3DPrint.com

3D Printing Business 3d systems america makes big area additive manufacturing Carnegie Mellon University Cincinnati Incorporated cmu Phoenix Analysis & Design Technologies Project Call raytheon University of Texas at El Paso Wolf Robotics youngstown business incubatorActing as the official additive manufacturing accelerator in the United States, the Youngstown, Ohio-based organization America Makes, also known as the National Additive Manufacturing Innovation.

Ohio 40

America Makes Welcomes UTEP’s Retiring President, Dr. Diana Natalicio, to Youngstown

Additive Manufacturing

America Makes proudly welcomed Dr. Diana Natalicio, President of The University of Texas at El Paso ( UTEP ) on her visit to the Institute August 1 st , before her retirement later this month. Her sustained commitment to provide all residents of the Paso del Norte region access to outstanding higher education opportunities has helped make UTEP a national success story. “It Keck Center for 3D Innovation Located at the University of Texas at El Paso, the W.M.

UTEP Will Be a Leader in 3D-Printing Data Collection Under Expanded Partnership with America Makes

Additive Manufacturing

Newswise, November 7, 2018 — The University of Texas at El Paso ( UTEP ) will be a pivotal leader in the collection of critical performance data for the 3D-printing industry while offering immense benefits to students through an expanded agreement with America Makes. UTEP has done an exemplary job growing the America Makes partnership for our students and community in El Paso,” said U.S. Keck Center for 3D Innovation in The University of Texas at El Paso.

3D Printing and Public Education Join Forces to Create Tactile Learning Objects for Students With Total or Partial Blindness

i.materialise

We spoke with University of Texas at El Paso biologist Dr. Michael A. He taught for over forty years and received Distinguished Teaching Award at the University of Texas at El Paso. 3D Printing Community Education 3D print 3D printed accessibility blind Design Kolitsky PhotoToMesh polyamide printing special needs universal access universal design University of Texas at El Paso

America Makes Announces Its Second Satellite Center to be Located on the Campus of Texas A&M University

Additive Manufacturing

Keck Center for 3D Innovation on the campus of the University of Texas at El Paso (UTEP). From Youngstown to El Paso and now College Station, America Makes is leading the transition of AM technologies from the research lab to commercialization. About The University of Texas at El Paso (UTEP). Located at the University of Texas at El Paso, the W.M.

Texas 40

Overview: Powder Bed Fusion for 3D Printing Optimized Biomedical Implants

3DPrint.com

L.E.Murr, a researcher from the University of Texas at El Paso, presents an overview of medical devices for 3D printing, outlined in the recently published ‘Metallurgy principles applied to. View the entire article via our website. 3D Printing Bioprinting 3d printed implants 3d printing research

America Makes Announces Awardees of $8M in Funding for Project Call #3

Additive Manufacturing

The University of Texas at El Paso- “A Low-cost Industrial Multi3D System for 3D Electronics Manufacturing”. Led by The University of Texas at El Paso (UTEP), in conjunction with Northrop Grumman, Stratasys Ltd., Featured News America Makes Boeing GE Global Research Georgia Institute of Technology ITAMCO NCDMM Project Call #3 Raytheon The University of Texas at El Paso University of Michigan University of Notre Dame University of Pittsburgh

Daniel A Tillman on 3D Printing In Education

3DPrint.com

The work of Daniel A Tillman, Professor in Educational Technology, College of Education at the University of Texas at El Paso centers around educating children and technology. Professor Tillman has. View the entire article via our website. Education 3d printing schools EdTech education 3D printing

3D Printing: The Stories We Didn’t Cover This Week — May 9, 2015

3DPrint.com

In this week’s stories we missed, while 3D printing gains a stronger foothold in the defense industry with the opening of an America Makes Satellite Center in El Paso, Texas, 3D printing makers continue... View the entire article via our website.

3D Printed Antenna Knowledge Base

DIY 3D Printing

GHz Bluetooth/Wi-Fi Antenna by Paul Deffenbaugh, Kenneth Church from The University of Texas El Paso: [link] 3D PRINTED ELECTROMAGNETIC TRANSMISSION AND ELECTRONIC STRUCTURES FABRICATED ON A SINGLE PLATFORM USING ADVANCED PROCESS INTEGRATION TECHNIQUES PAUL ISAAC DEFFENBAUGH, M.S.E.E. Since I''m getting more involved with communal WiFi mash networks and open source smart city project in my town, I decided to research and make a small knowledge base on 3d printed antennas.

New Industry Study

Wohlers Talk

I am especially thankful to Bill Beaver of York Technical College, Ping Fu of Geomagic, Ismail Fidan of Tennessee Tech University, Tim Gornet of the University of Louisville, Tom Mueller of Express Pattern, Michael Siemer of Mydea Technologies, and the teams at Loughborough University, the University of Texas at El Paso, and Utah State University. I am relieved to have published Wohlers Report 2010 , our annual industry report on additive manufacturing (AM).

Study 100

USF and nScrypt Show How 3D Printed Circuit Structures Can Replace PCBs

Additive Manufacturing

At the time of the project, Ken Church was also a professor at the University of Texas at El Paso. In an SMTA white paper recently posted by Circuitnet , Orlando, Florida-based nScrypt , its research arm Sciperio , and researchers at the University of South Florida described a roadmap for using 3D printing to move from Printed Circuit Boards (PCBs), which are standard in electronics packaging designs today, to Printed Circuit Structures (PCSs).

ULA Challenges GrabCAD to Help Transform the Future of Space Launch

Stratasys Blog for a 3D World

In September, ULA announced winners of its university CubeSat competition , and University of Texas El Paso’s winning submission includes a test of on-orbit additive manufacturing. I’ve been building rockets all my life – starting with finding dynamite in my grandmother’s barn as a kid (don’t try that at home!). Now I have the pleasure of working with the country’s most experienced launch team at United Launch Alliance.

LulzBot’s Hackerspace Giveaways Awarded

Fabbaloo

Fab Lab El Paso in El Paso, TX, USA won for their open-source Urban Agriculture initiative projects! You may recall we wrote of a contest sponsored by Aleph Objects, makers of the LulzBot line of personal 3D printers, to provide selected hackerspaces with free equipment. Now, they’ve done so. The contest involved having hackerspaces worldwide provide evidence they’ve strongly supported the open source hardware community in some way.

America Makes Announces Its Third Satellite Center to be Located at the National Institute for Aviation Research (NIAR) on the Campus of Wichita State University

Additive Manufacturing

Keck Center for 3D Innovation on the campus of the University of Texas at El Paso (UTEP). About The University of Texas at El Paso (UTEP) UTEP has redefined public higher education not only in Texas, but also across the nation as the University begins its second century of service. Keck Center for 3D Innovation Located at the University of Texas at El Paso, the W.M. The Institute Enters into a Memorandum of Understanding with WSU-NIAR.

America Makes Honors Ralph Resnick and Rob Gorham as Its Distinguished Collaborator Awardees

Additive Manufacturing

retired President of the University of Texas at El Paso (UTEP) Col. Class of 2019 America Makes Ambassadors Announced. Youngstown, Ohio — October 28, 2019.

Introducing the 3DEXPERIENCE Hackathon at 3DEXPERIENCE World

The Solidworks Blog

Eric lives in El Paso, TX, with his wife Betsy, and two children, Sam (7) and Holly (4). 3D EXPERIENCE For Good stands for harmonizing product, nature and life with a priority on sustainability.

Design Competition Demonstrates Promising Future for Additive Manufacturing in Satellite Design

Additive Manufacturing

Keck Center for 3D Innovation, University of Texas, El Paso. Engineers from around the world leave jury of aerospace experts impressed with submissions. Minneapolis & Rehovot, Israel – Aug. 25, 2015 – Stratasys Ltd. Nasdaq:SSYS), aleading global provider of 3D printing and additive manufacturing solutions, along with its subsidiaries GrabCAD and MakerBot , has announced the winners of the CubeSat Challenge after a month-long, highly competitive engineering competition.

Stratasys and MakerBot Launch CubeSat Challenge for Aerospace Engineers and Students

Additive Manufacturing

Keck Center for 3D Innovation, University of Texas El Paso. Challenge taps GrabCAD’s 2 million members to rethink the research satellite. Minneapolis, MN, and Brooklyn, NY, May 20, 2015 – A growing number of aerospace companies are embracing 3D printing as they transform how they prototype and manufacture.

Researchers use aerosol jet 3D printing to develop strain gauges with unprecedented sensitivity

3ders

Researchers from Carnegie Mellon University, the University of Texas El Paso, and Washington State University recently made use of 3D printing in a project that should lead to the development of significantly improved electronic measuring equipment.

Praxis3D launches their all-metal dual X-Truder on Kickstarter

3ders

Over the last year, a small team of FDM enthusiasts based in El Paso, Texas has been refining and testing a dual filament FDM print head they call the X-Truder. This article Praxis3D launches their all-metal dual X-Truder on Kickstarter is first published at 3ders.org. 3D Printer Accessories

America Makes announces 3D printing Project Call Awardees, releases $5.5M in funding

3ders

Among the awardees were Carnegie Mellon University, the University of Texas at El Paso (UTEP), Wolf Robotics, and more. Ohio-based America Makes, the National Additive Manufacturing Innovation Institute, has just announced the seven awardees of its latest Project Call for additive manufacturing advancement programs. The Project Call, which was launched in March 2016, is focused on areas within five groups, which include Design, Material, Process, Value Chain, and AM Genome.

UTEP receives $2.1 million grant to develop multi-material 3D printer factory of the future

3ders

The University of Texas at El Paso, in conjunction with its renowned W.M. Keck Center for 3D Innovation, is developing an all-in-one 3D printer that will be capable of assembling metals, electronics and plastics and printing fully functional electronics and industry-quality parts. The $2.1 million research investment was funded in part by America Makes, which has already announced it will open its first Satellite Center on the UTEP campus. This article UTEP receives $2.1