Real-time metal 3D printer monitoring at El Paso awarded in $900K ARL grant

3D Printing Industry

Two metal 3D printing projects at the University of Texas at El Paso (UTEP) have been awarded funding in a nine-hundred thousand dollar grant from the U.S. With problem-solving objectives, the projects look to develop a method of monitoring and auto-correcting powder-bed fusion based processes, and to enhance the mechanical properties of […]. Army Researchers Laboratory University of Texas at El Paso UTEP W.

University of Texas at El Paso: 3D Printed Electrodes Show Promise Via DLP Processes

3DPrint.com

In ‘3D Architecture Electrodes for Energy Storage Applications,’ Seong hyeon Park explores the demand for harnessing and keeping energy, and especially on the micro-scale. Although micro-scale. View the entire article via our website. 3D Printing 3D printed electrodes 3D printed energy storage

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

America Makes Congratulates The University of Texas at El Paso (UTEP) and Its W.M. Keck Center for 3D Innovation on Partnership with Aconity3D

Additive Manufacturing

America Makes proudly extends its congratulations to The University of Texas at El Paso ( UTEP ), a Platinum-level member of the Institute, and UTEP’s renowned W.M. About The University of Texas at El Paso (UTEP). Located at the University of Texas at El Paso, the W.M.

UTEP creates “world first” volumetric circuit with automated 3D printing

3D Printing Industry

The Electromagnetics and Photonics Lab (EM Lab) of the University of Texas at El Paso (UTEP) has developed an automated process for 3D printing electronics. Rumpf Electronics EM Lab Gilbert Carranza Ken Church Nano Dimension nScrypt Raymond Rumpf simon fried The University of Texas at El Paso Ubaldo Robles UTEP volumetric circuit

America Makes Welcomes UTEP’s Retiring President, Dr. Diana Natalicio, to Youngstown

Additive Manufacturing

America Makes proudly welcomed Dr. Diana Natalicio, President of The University of Texas at El Paso ( UTEP ) on her visit to the Institute August 1 st , before her retirement later this month. Keck Center for 3D Innovation Located at the University of Texas at El Paso, the W.M.

UTEP Will Be a Leader in 3D-Printing Data Collection Under Expanded Partnership with America Makes

Additive Manufacturing

Newswise, November 7, 2018 — The University of Texas at El Paso ( UTEP ) will be a pivotal leader in the collection of critical performance data for the 3D-printing industry while offering immense benefits to students through an expanded agreement with America Makes.

3D Printing and Public Education Join Forces to Create Tactile Learning Objects for Students With Total or Partial Blindness

i.materialise

We spoke with University of Texas at El Paso biologist Dr. Michael A. He taught for over forty years and received Distinguished Teaching Award at the University of Texas at El Paso.

America Makes Announces Awardees of $8M in Funding for Project Call #3

Additive Manufacturing

The Institute’s third project call, which was released in February 2015, was focused on five technical additive manufacturing topic areas—design, material, process, value chain, and genome—each with subset focus areas.

3D Printed Antenna Knowledge Base

DIY 3D Printing

Here is the summary from process homepage: Mobile device antennas including LTE, NFC, GPS, Wifi, WLAN, and BT have been printed using the Aerosol Jet process and independently tested by a leading cell phone component supplier.

USF and nScrypt Show How 3D Printed Circuit Structures Can Replace PCBs

Additive Manufacturing

At the time of the project, Ken Church was also a professor at the University of Texas at El Paso.

ULA Challenges GrabCAD to Help Transform the Future of Space Launch

Stratasys Blog for a 3D World

The support bracket is used during ground processing at numerous locations at the base of the Atlas V payload fairing. In many cases, we have reduced processing times by more than 50 percent.

America Makes Announces Its Third Satellite Center to be Located at the National Institute for Aviation Research (NIAR) on the Campus of Wichita State University

Additive Manufacturing

Keck Center for 3D Innovation on the campus of the University of Texas at El Paso (UTEP). Our experienced team specializes in identifying the needs, the players, the technologies, and processes to attain optimal solutions for our customers. About The University of Texas at El Paso (UTEP) UTEP has redefined public higher education not only in Texas, but also across the nation as the University begins its second century of service.

America Makes Honors Ralph Resnick and Rob Gorham as Its Distinguished Collaborator Awardees

Additive Manufacturing

He holds several patents in manufacturing processes and metrology. retired President of the University of Texas at El Paso (UTEP) Col. Class of 2019 America Makes Ambassadors Announced. Youngstown, Ohio — October 28, 2019.

Design Competition Demonstrates Promising Future for Additive Manufacturing in Satellite Design

Additive Manufacturing

Keck Center for 3D Innovation, University of Texas, El Paso. Engineers from around the world leave jury of aerospace experts impressed with submissions. Minneapolis & Rehovot, Israel – Aug. 25, 2015 – Stratasys Ltd.

Stratasys and MakerBot Launch CubeSat Challenge for Aerospace Engineers and Students

Additive Manufacturing

3D printing can also simplify production as you move from the hand-built satellites of today to an automated process that will enable constellations of small satellites to be built more efficiently. Keck Center for 3D Innovation, University of Texas El Paso.

Introducing the 3DEXPERIENCE Hackathon at 3DEXPERIENCE World

The Solidworks Blog

Since then he has focused exclusively on contract design work for many different industries; from food processing equipment to medical devices and consumer products. Eric lives in El Paso, TX, with his wife Betsy, and two children, Sam (7) and Holly (4).

America Makes announces 3D printing Project Call Awardees, releases $5.5M in funding

3ders

The Project Call, which was launched in March 2016, is focused on areas within five groups, which include Design, Material, Process, Value Chain, and AM Genome. Among the awardees were Carnegie Mellon University, the University of Texas at El Paso (UTEP), Wolf Robotics, and more.