New facility for Selective Electron Beam Melting

3D Printing Industry

Fraunhofer IFAM Dresden orders new facility for Selective Electron Beam Melting with ARCAM With the new Q20plus by the Swedish manufacturer ARCAM, the Fraunhofer Institute for. Aerospace Research arcam ebm electron beam melting fraunhofer

Additive Manufacturing: Still a Real Need for Design Guidelines in Electron Beam Melting

3DPrint.com

Researchers from King Saud University in Saudi Arabia explore the potential—and the challenges—for industrial users engaged in metal 3D printing via EBM processes. 3D Printing 3D printing design guidelines additive manufacturing research ARCAM A2 3D printer Design for Additive Manufacturing (DFAM) EBM 3D printing Ti6Al4VTheir findings are outlined in the. View the entire article via our website.

China: 3D Printed Vertebral Body Used to Reconstruct Upper Cervical Spine of 9 Patients

3DPrint.com

Primary osseous spinal tumors make up roughly 5% of all primary bone tumors, and reconstruction is required to restore the spine’s integrity and stability. However, it’s hard to. View the entire article via our website.

China 82

Chinese Researchers Validate Effectiveness of Teenager's 3D Printed Custom Knee Joint Replacement Prosthesis

3DPrint.com

3D Printing Medical 3D Printing Metal 3D Printing Science & Technology 3d printed bone prosthesis 3d printed bone replacement 3d printed prosthetics Arcam Q10 bone cancer bone replacements china custom prosthetic ebm ebm printing electron beam melting Electron Beam Melting (EBM) electron beam melting titanium knee joints prosthetics research paper Sichuan University study surgical reconstruction titanium alloys tumor

Researchers Study Mechanical Properties & Biocompatibility of EBM Bone Plates  

3DPrint.com

Researchers from Saudi Arabia and Manchester, UK explore the creation of bone plates via electron beam melting (EBM) processes, outlining their findings in the paper ‘Topology optimised metallic bone. 3D Printing Medical 3D Printing Metal 3D Printing additive manufacturing ebm EBM Bone Plates electron beam melting Materialise Magics software

Comparing 3D Printed Titanium Acetabular Cup Implants

3DPrint.com

In the recently published ‘Comparative analysis of current 3D printed acetabular titanium implants,’ researchers analyzed innovative medical devices in the form of acetabular cups, meant to improve. 3D Printing 3D printed acetabular cups electron beam melting Laser Rapid Manufacturing (LRM) titanium-aluminium-vanadium alloy

Characterization of Conventionally Manufactured & 3D Printed Acetabular Cup Implants

3DPrint.com

The use of 3D printed porous titanium implants in the orthopaedics field is growing, as they feature a similar design to components manufactured with traditional methods, but have a better. View the entire article via our website.

Carnegie Mellon University Research Finds Flaws in 3D Printed Titanium

3DPrint.com

3D Printing 3D Printing Materials Health 3D Printing 3D printed titanium components 3d printing metal powder 3d printing research aerospace Argonne National Laboratory Carnegie Mellon Electron Beam Melting (EBM) electron beam melting titanium material research medical metal 3d printing metal powder materials research Selective Laser Melting (SLM) titanium titanium 3d printing titanium powder

EBM 3D Printing Process Used to Process a Steel Alloy with High Damage Tolerance

3DPrint.com

While the adoption and development of metal 3D printing continues to grow, so too does research into different types of metals that can be 3D printed, including steel. The aerospace and automotive. View the entire article via our website.

Top 10 3D Printing Aerospace Stories from 2018

3DPrint.com

3D printing has played an important role in many industries over the past year, such as medical, education, and aerospace. It would take a very long time to list all of the amazing news in aerospace. View the entire article via our website.

Researchers Complete Comprehensive Evaluation of Manufacturing Methods, Including 3D Printing, for Impellers

3DPrint.com

3D Printing 3D printing evaluation comparative research comparison edm electrical discharge machining electrochemistry Electron Beam Melting (EBM) impeller journal article research paper Robert Bosch RWTH Aachen UniversityCombustion engines uses turbochargers to boost their performance. But, for multiple reasons, there isn’t a conventional process chain for economically manufacturing the component. A team of. View the entire article via our website.

Nanfang Additive Manufacturing confirms contract for 3D printed oil and gas pipelines

3D Printing Industry

headquartered in Foshan, China, has signed a contract with the state-owned China National Petroleum Corporation (CNPC) Tubular Goods Research Institute (TGRI). In the terms of the contract, Nanfang and TGRI will investigate whether electron beam manufacturing (EBM) can be used to make components for oil and gas pipelines. oil & gas pipes TGRI Tubular Goods Research InstituteNanfang Additive Manufacturing Technology Co.,

A Busy Week for GKN Aerospace: Agreements for Metal Additive Manufacturing, Testing 3D Printed Components

3DPrint.com

This week, the company announced that it has signed a five-year research agreement with Oak Ridge National. It’s been a news-heavy week for several companies, and GKN Aerospace is no exception. View the entire article via our website.

3D Printing News Briefs: August 24, 2018

3DPrint.com

We’re sharing some business news in today’s 3D Printing News Briefs, followed by some interesting research and a cool 3D printed statue. Meld was listed as a finalist in the R&D 100. View the entire article via our website.

GE Additive -Reimagining Knee Replacements with Additive Technology and Artificial Intelligence

Additive Manufacturing

Featured Medical News AI Arcam EBM Q10plus artificial intelligence DMLM EBM Electron Beam Melting GE Additive Gian Guido Riva Humanitas Research Hospital IoT-connected sensorized wearables knee arthroplasty knee implants Maurilio Marcacci REJOINT

CSMX4 Single Crystalline Superalloy Cannot be Welded, but Works Well with Additive Manufacturing

3DPrint.com

In a new research paper entitled. 3D Printing 3D Printing Materials Metal 3D Printing Science & Technology Arcam A2x CSMX-4 Electron Beam Melting (EBM) single crystalline superalloyMetal additive manufacturing is both an art and a science, and an area of study that is constantly growing and evolving as new materials are developed. View the entire article via our website.

Study 45

EBM vs DMLS 3D Printing: Which Method and Surface Texture is Best for Titanium 3D Printed Implants?

3DPrint.com

3D printing is often used to manufacture implants and other prosthetic devices for amputees, but have you ever stopped to consider which 3D printing method, and surface texture, is the best? As we. View the entire article via our website.

LPW Releases New Metal AM Case Study

Additive Manufacturing

LPW has state-of-the-art laboratory facilities, and undertakes a wide range of research and development to constantly expand the knowledge-base of the AM industry.

LPW Chairs Advisory Board of National Manufacturing Hub for Advanced Powder Processes

Additive Manufacturing

As a respected industry entrepreneur and leader, Dr Carroll was approached to Chair the Industrial Advisory Board of MAPP, which is led by the University of Sheffield and funded by the Engineering and Physical Sciences Research Council (EPSRC).

LPW’s latest case study, ‘Maraging Steel: The Effects of Alloy Chemistry on Processability’

Additive Manufacturing

A metal powder can not only move out of, but can also vary within, specification,” says Dr Rob Deffley, LPW’s Research & Development Manager. “In LPW’s latest AM case study uses M300 to demonstrate the importance of metal powder specification.

LPW shares AM expertise at Daresbury Campus Technology Hub

Additive Manufacturing

The company has developed a full range of optimised powders specifically for Selective Laser Melting (SLM), Laser Metal Deposition (LMD) and Electron Beam Melting (EBM) with standard powders supplied from stock, and custom and development alloys available on request.

LPW Technology Ltd – Metal AM Company Ranks in Top National Export League

Additive Manufacturing

Our highly-trained teams put customer service at the heart of everything we do, and we direct our research and development expertise into anticipating the needs of the metal AM industry and designing forward-looking solutions that exceed current requirements,” says Dr Carroll. “We

LPW Releases New AM Metal Powder Atomisation Case Study

Additive Manufacturing

15 th March, 2017: Runcorn, UK: LPW Technology Ltd , the market leader in the development, processing and supply of high quality metal powders and solutions for the Additive Manufacturing (AM) industry, has released its most recent case study, ‘Vacuum vs non-vacuum melted gas atomised powders.’. “It’s It’s important to understand how the different melting techniques impact on the level of impurities, particularly oxygen and nitrogen, in the processed powders.

CRIQ uses GE Additive Arcam EBM machine to develop 3D printed maxillofacial implants

3D Printing Industry

The Québec Industrial Research Centre (CRIQ), has installed a GE Additive Arcam Electron Beam Melting (EBM) Q10 Plus machine at its facility to accelerate the development of patient-specific lower jawbone implants. Medical & Dental CRIQ François Gingras GE Additive Arcam EBM Q10 Plus Québec Industrial Research Centre Stephan Zeidler University Hospital of Quebec

Sciaky Inc. joins ADAPT to develop metal 3D printing

3D Printing Industry

Through this collaboration, the company will further the development of AM and expand the applications of its Electron Beam Additive Manufacturing (EBAM) systems to the aerospace industry and other manufacturing sectors. Electron beam melting […]. Chicago-based metal 3D printers manufacturer, Sciaky Inc., has joined the Alliance for the Development of Additive Processing Technologies (ADAPT), a Colorado-based industry-academia consortium.

GE Additive unlocks development mode for EBM metal 3D printing

3D Printing Industry

From November GE Additive will be offering academic researchers the ability to access previously locked down features on the Arcam EBM A2X metal additive manufacturing systems. Access to development mode on electron beam melting industrial 3D printers typically comes with an additional fee, however GE Additive are hoping that by providing existing customers free access […].

3D Printing in Australia

Wohlers Talk

On May 26, the Honorable Ian Macfarlane, Australia’s Minister for Industry and Science, announced the Innovative Manufacturing Cooperative Research Center (IMCRC). Caffrey and I were present to participate in the festivities and meet many of the talented researchers and scientists at CSIRO.

Manufacturing – Pushing Boundaries

Additive Manufacturing

The method uses electron beam melting to precisely control the microstructure of additive manufactured materials, determining the mechanical properties at different locations within a part. By Ron Walli | wallira@ornl.gov | ORNL Communications.

ORNL Research Reveals Unique Capabilities of 3-D Printing

Additive Manufacturing

15, 2014—Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated an additive manufacturing method to control the structure and properties of metal components with precision unmatched by conventional manufacturing processes. OAK RIDGE, Tenn.,

User views on metal additive manufacturing

Leslie's Blog

Honeywell , for example, uses Arcam’s Electron Beam Melting (EBM) additive manufacturing technology to build parts for aerospace use. While the research and engineering team do a lot of prototyping there, they also use additive for production.

ORNL Reveals the Unique Capabilities of 3-D Printing

Fabbaloo

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated an additive manufacturing method to control the structure and properties of metal components with precision unmatched by conventional manufacturing processes. research

GE Well Positioned to Accelerate the Additive Revolution

Additive Manufacturing

billion in manufacturing and additive technologies at GE’s Global Research Center (GRC) in Niskayuna, New York, in addition to building a global additive network of centers focused on advancing the science. Advancing additive as both an equipment provider and end user.

What’s ahead for 3D printing in health care

Leslie's Blog

A new report published by Allied Market Research, titled, “ World 3D Printing Healthcare Market—Opportunities and Forecasts, 2014–2020 ,” projects that the world 3D printing healthcare market is forecast to grow at a CAGR of 26.2% –The electron beam melting technology segment is projected to grow at the highest CAGR of 29.6%

New LPW Technology – Royal Academy of Engineering Research Chair Created to Mine, Process and Alloy Data, and to Model Novel Alloys for Optimising the Additive Manufacturing Process

Additive Manufacturing

Professor Rivera is transferring from his post as Assistant Director of Research, SKF University Technology Centre, Cambridge University where his focus has been on sophisticated modelling to generate new alloys.

AM / RP Technologies

RPM Tools

Some are melting or softening material to produce the layers (SLS, FDM) where others are laying liquid materials thermosets that are cured with different technologies. A large number of competing technologies are available in the marketplace.

LPW’s Latest AM Case Study: Porosity – Powder or Process Derived?

Additive Manufacturing

Porosity might originate from the metal powder or the AM process,” says Dr Rob Deffley, LPW’s Research & Development Manager.

3Diligent’s New 2019 State of Metal 3D Printing Report Documents Growth of Metal 3D Printing and New Processes

Additive Manufacturing

According to research conducted by 3Diligent of 3D Printing project requests in 2018, 45 percent requested metal printing processes, while 45 percent specified polymer and balance left the decision to 3Diligent and its network of fabricators to suggest an optimal process.

Is 3D Printed Titanium Fatally Flawed?

3D Printing Industry

Carnegie Mellon University is one of the world leaders in 3D printing research and has produced some stellar research over the years. Titanium powders are generally used in combination with a Selective Laser Melting printer or an Electron Beam Melting process.

Is 3D Printed Titanium Fatally Flawed?

3D Printing Industry

Carnegie Mellon University is one of the world leaders in 3D printing research and has produced some stellar research over the years. Titanium powders are generally used in combination with a Selective Laser Melting printer or an Electron Beam Melting process.

Metalheads Unite at Metal Day in Singapore

Materialise

Their world-class events are a brilliant networking method and help us to promote metal AM – in particular, Arcam AB’s Electron Beam Melting (EBM) technology. March 17, 2016 marked the first Metal Day held by Materialise in Asia Pacific.

Arcam News at Formnext 2017

Additive Manufacturing

Through research and development, Arcam EBM has identified the need to give the user on-time information regarding the status of their EBM machine while gathering and analyzing statistical data.

Arcam 52

3D Printing Market by Technology

RPM Tools

The technology segment comprises of Stereo lithography (SLA), Laser Sintering, Electron Beam Melting (EBM), Fused Disposition Modeling (FDM), Laminated Object manufacturing (LOM), Three Dimensional Inkjet printing (3DP), and other proprietary technologies. The application segment includes aerospace industry, automotive consumer products, healthcare, government and defense, industrial/business machines, education & research, and others (arts, architecture).

3Diligent Releases Complete Guide to Metal 3D Printing

Additive Manufacturing

Powder Bed Fusion – Electron Beam Melting. CEO to Speak in Chicago on Metal Printing Processes at 3D Metal Printing Experience and Tech Tour . Los Angeles, Calif.