ExOne Introduces the X1 25PRO Metal Binder Jetting 3D Printer


3D printer manufacturer and 3D printing service provider ExOne is known for its binder jetting technology, including metal binder jetting. The company offers more than 10 different 3D printer models, View the entire article via our website. 3D Printers 3D Printing Metal 3D Printing Binder Jetting exone Innovent metal binder jetting X1 25PRO

ExOne Announces Exerial™ 3D Printing System Designed for Industrial Series Production

Additive Manufacturing

Largest ExOne system to-date offers multiple industrial stations and continuous production and processing. ExOne will formally debut the Exerial machine at the GIFA International Foundry Trade Fair in Düsseldorf, Germany, on June 16-20, 2015. About ExOne.

ExOne 65

Trending Sources

ExOne Qualifies Water Wash-out Tooling Process for Industrial 3D Printing Applications

Additive Manufacturing

ExOne’s Materials Applications Laboratory (ExMAL) identified the limitations of traditional manufacturing techniques for tooling production in water soluble materials and developed the new application to meet the challenges presented by the varying designs of composite parts. About ExOne.

ExOne 63

ExOne Unveils Innovent™ 3D Printing System for Research and Education Customers

Additive Manufacturing

Delivers a build volume eight times larger than previous lab model. Printer available as complete system with oven and furnace, allowing for easy migration to ExOne’s larger scale platforms. Kent Rockwell, Chairman and Chief Executive Officer for ExOne. About ExOne.

ExOne 52

Shapeways and ExOne Steel 3D Printing Community Meet Up In Pittsburgh

Shapeways Blog

Last week Shapeways hosted it’s first community joint meet up with ExOne in Pittsburgh. ExOne is a production partner of Shapeways with whom Shapeways works closely to offer the best steel 3D prints to our community.

ExOne 55

Sand Casting on a Large Scale with the S-Max 3D Printer from ExOne


The ExOne S-Max has held its place as the world’s largest sand-casting additive manufacturing system since its introduction in 2010. How the ExOne S-Max Works: The S-Max uses an additive manufacturing method called Binder Jetting to build its models.

With 3D printing materials, knowledge is power

Leslie's Blog

Said Tom Pasterik, manager of business and process development at ExOne, Engineers have been constrained for decades and they are still getting comfortable with the freedom they now have with AM, including with materials. ExOne.

From Aerospace to Jewelry, Metal 3D Printing Is Hot

Shapeways Blog

The production model launches in 2018. If you’re designing premium products and need high strength and durability, you can’t go wrong with metal.

3D Printed Steel Frequently Asked Questions Explained (Video)

Shapeways Blog

In this video ExOne technician Brandon Cary answers FAQs on our steel material. 3D Modeling 3D Printing Materials VideoOne of our community’s favorite materials that Shapeways offers is our 3D printed stainless steel.

Video 86

University of Pittsburgh’s Swanson School of Engineering and McGowan Institute for Regenerative Medicine at the Forefront of Additively Manufactured Biomedical Device Research

Additive Manufacturing

Corporate partners include ExOne , Hoeganaes Corp. ,

GE’s New AM Center

Wohlers Talk

CATA houses multiple AM machines from EOS, SLM Solutions, Stratasys, and ExOne. Other key organizations close to CATA are Alcoa, ATI, Carpenter Technology, ExOne, Lincoln Electric, and the National Center for Defense Manufacturing and Machining.

ExOne 141

AMUG – Fried Vancraen Selected for AMUG Innovators Award

Additive Manufacturing

Previous recipients include technology creators Chuck Hull, Scott Crump, and Carl Deckard, inventors of Stereolithography, Fused Deposition Modeling, and Selective Laser Sintering, respectively. MILWAUKEE, Wisc.,

Materials Explainer: 3D Printing in Steel

Shapeways Blog

Shapeways works with ExOne, our partner in Pittsburgh, which was once the heart of the American steel industry. Finally, our partners at ExOne polish your product.

ExOne 83

AMUG-Innovators Showcase to Feature Scott Crump

Additive Manufacturing

Interview with the inventor of Fused Deposition Modeling during Users Group Conference. Featured News 2016 Innovators Showcase Additive Manufacturing Users Group AMUG FDM Fused Deposition Modeling IDEA Inc.

Why 2017 Will Be the Breakout Year for 3D Printing Technologies

3D Printing Review

It’s likely that over the course of 2017 HP will begin introducing new materials as well as new printer models that utilize the MJF technology, catering to businesses large and small.

Additive Manufacturing Users Group Names Technical Competition Winners

Additive Manufacturing

In collaboration with Brian Yingling, who created the CAD models and performed detail finishing, CIDEAS brought this car to life using Fused Deposition Modeling (FDM) and Stereolithography (SLA). Mike Littrell and Vince Anewenter recognized for excellence in additive manufacturing.

Dr. Hans Langer Selected for AMUG Innovators Award

Additive Manufacturing

Previous recipients include technology creators Chuck Hull, Scott Crump, and Carl Deckard—inventors of Stereolithography, Fused Deposition Modeling, and Selective Laser Sintering, respectively—Fried Vancraen, founder of Materialise, and Gideon Levy of Technology Turn Around. MILWAUKEE, WISC.,

The Complete 3D Printing Conference

Capturing the Value

Leading companies such as 3D Systems, Stratasys, ExOne and Voxeljet were evaluated and compared. Specific cases in which the technology realised customised implants or allowed the physical creation of models for visualisation and preparation for surgeries underlines the importance of 3D printing and the impact that it’s having in the medical sector. The Complete 3D Printing Conference was held on 25 March in London.

ORNL Receives Five 2019 R&D 100 Awards

Additive Manufacturing

High Strength Binder System for Additive Manufacturing, developed by ORNL and ExOne. Funding for this project came from the DOE Energy Efficiency and Renewable Energy Advanced Manufacturing Office and ExOne.

ExOne 52

Carnegie Mellon University Leads the Way With 3D Printing Education

3D Printing Hub

The center recently added the ExOne Innovent Research and Education 3D printer. The device makes the process of printing 3D models from industrial-grade materials far more economical than would be possible with any other printer.

AMUG 2016—a unique opportunity to learn and connect

Leslie's Blog

One of the highlights of this year’s conference was the Inventor Showcase, were attendees had the opportunity to get to know the inventor of Fused Deposition Modeling (FDM), Scott Crump, a little better.

3D Print at Personalize TCT Show Birmingham

Algorithmic Art

And in addition to the interesting exhibitions and booths, C-Level executives from 3D Systems, Stratasys, ExOne, Mcor Technologies, Shapeways and MakieLab have been all on stage to share their wealth of experience across the full spectrum of the newest 3d printing technologies.


Key Considerations for Weighing the Purchase of a 3D Printer

3D Printing Review

Or are you simply looking for accurate models? If you need functional models with some durability, a Fused Deposition Modeling (FDM) or Selective Laser Sintering (SLS) machine might be best for you.

Futuristic Factories

RPM Tools

ExOne, an additive manufacturing company based in North Huntingdon, Pa., ExOne designs and builds 3-D printers for sale and also produces compressor pump castings, rotors and other complex parts for automotive, aerospace, off-road construction and other manufacturers using its own in-house printers. ExOne went public last year and is currently listed on the NASDAQ. At ExOne, shop floor workers make up to $60,000, while designers, engineers and others fetch more.

ExOne 40

Sandvik Continues to Invest in Printing Capabilities and Metal Powder Capacity for Additive Manufacturing

Additive Manufacturing

The new multi-laser RenAM 500Q systems complement Sandvik’s existing AM machines, which include printers from EOS, Concept Laser, Arcam and ExOne. Increased AM capacity, industrial AM cases and market-leading Osprey TM metal powder range to be showcased at Formnext 2018.

ExOne 52

Additive Manufacturing Users Group Names Technical Competition Winners

Additive Manufacturing

Braune captured the judge’s attention with “The Master Chief,” a 30-inch-tall model of the Halo video game character by the same name. The model was comprised of seven pieces that were produced with stereolithography and Digital Light Synthesis. Erika Berg, Maddie Frank, and Bill Braune recognized for excellence in additive manufacturing. MILWAUKEE, WISC.,

Professor Gideon Levy Selected for AMUG Innovators Award

Additive Manufacturing

Previous recipients include technology creators Chuck Hull, Scott Crump, and Carl Deckard—inventors of Stereolithography, Fused Deposition Modeling, and Selective Laser Sintering, respectively—and Fried Vancraen, founder of Materialize. MILWAUKEE, WISC.,

America Makes Honors Ralph Resnick and Rob Gorham as Its Distinguished Collaborator Awardees

Additive Manufacturing

Under his guidance and oversight throughout these transformative last seven years, the model of public-private partnerships was established and proven through an extraordinary level of member collaboration. Class of 2019 America Makes Ambassadors Announced. Youngstown, Ohio — October 28, 2019.

3D Printing Market by Technology

RPM Tools

The Market has been evolving as a technique to create 3D models and prototypes, in many industries, namely, automotive, aerospace, healthcare, and consumer products- in order to investigate the possibility of completing a project in lesser time and with few resources. SLM Solutions (Germany), LayerWise (Belgium), ExOne (U.S.),

Additive Manufacturing Users Group Opens Conference Registration

Additive Manufacturing

For 2016, the special guest will be Scott Crump, inventor of Fused Deposition Modeling (FDM) and co-founder of Stratasys. Louis Union Station to Host Annual Event. CHATSWORTH, CALIF.,

AMUG-Additive Manufacturing Users Group (AMUG) Names Technical Competition Winners

Additive Manufacturing

Reese’s Realize team turned a stereolithography model into a beautiful, yet somewhat grotesque, “Hunting Trophy.” Todd Reese’s winning advanced finishing entry demonstrated skill and artistry with paint on a printed model. CHATSWORTH, CALIF.,

Additive Manufacturing Users Group Announces Scholarship Recipients

Additive Manufacturing

Her research seeks to address these challenges by establishing a physics-based model to inversely determine the melt pool size and cooling rate needed to achieve ideal material quality and to develop a control system to meet these conditions.

Additive Manufacturing Users Group (AMUG) Opens Conference Registration

Additive Manufacturing

Over the past 30 years, the technology has become mainstream, the options have expanded and the applications have progressed beyond simple models. Association to celebrate its 30 th anniversary in St. Louis, Missouri. MILWAUKEE, WISC.,

Carl Deckard Selected for AMUG Innovators Award

Additive Manufacturing

He continued, “In the early days, the three core technologies were Selective Laser Sintering, Stereolithography and Fused Deposition Modeling. Inventor of Selective Laser Sintering to share experiences during Users Group Conference. MILWAUKEE, WISC.,

AMUG Announces Scholarship Recipients

Additive Manufacturing

Without access to a 3D printer, her students turn the digital concepts into physical models with LEGO® and household materials. Lydia Nelson and Yaser Shanjani to join members at annual conference. CHATSWORTH, CALIF.,

The 3D Printers Are Coming: Dig More Coal?

RPM Tools

In many cases fascinating and even life-saving uses are springing up everywhere from doctors printing a replica of a patients heart to better study a surgical procedure, to on-line computer gamers making physical models of their virtual people, to pregnant Japanese women offered life-size replicas of their unborn child from a high-res ultrasound scan. The business model for 3D printers will be as diverse as their applications. Which business model wins?

America Makes Announces Awardees of $8M in Funding for Project Call #3

Additive Manufacturing

Led by the University of Pittsburgh, in conjunction with ANSYS, United Technologies Research Center, Honeywell, Materials Science Corporation, Aerotech, ExOne, RTI International Metals, and the U.S. Nine Teams Awarded; 60 Organizations Teaming to Advance Additive Manufacturing Technologies.