Canadian Startup is Turning Food Waste into Biodegradable, Plastic 3D Printing Filament

3D printing is often used in sustainability efforts, such as making tires, prosthetics, and cars from recycled materials, water treatment efforts, and stopping food waste with 3D printed vegetables. 3D Printed Food 3D Printing 3D Printing Materials 3d food printing 3d print food 3d printing food bacteria biodegradable plastic bioplastic biopolymers food waste Genecis recycle startup University of Toronto

Food 83

Live Entrepreneurship & 3D Value Networks: Sustainability in Food packaging

Sustainability is on everybody’s lips and single use plastics does not have a good reputation. When the public perception is that plastic is all bad, it is hard to remind. Featured Stories janne packages packaging plastic plastics polymers

Food 64

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Wikifactory and Thought For Food Challenge: Solutions to Sustainably Feed the World

There are many ongoing efforts to use 3D printing for the purposes of increasing sustainability in the world, from marine applications and reducing plastic waste to clean water initiatives. 3D Printing 3d food printing 3d viewer agriculture challenge collaboration food food 3d printing non-profit online t open hardware sustainability TFF Digital Labs Thought For Food Wikifactory

Food 58

3D printing with recycled plastic: Turning food waste into sustainable materials


The post 3D printing with recycled plastic: Turning food waste into sustainable materials appeared first on 3D Printing Blog: Tutorials, News, Trends and Resources | Sculpteo Additive Manufacturing is a cutting-edge technology alr […].

Product Design Beyond Plastic—Exploring Materials

3D Innovations

Plastic is a popular go-to material for many new products and inventions—however, there are many more material options to choose from based on your product design, product specifications, intended use and performance maximization. Silicone : Products made for food or medical industries.

3D Printing: You Can Now Print Your Food

3D Printing Review

Now, even consumable food can be created on a 3D printer. Here are some various foods that companies are printing using a 3D printer. The ChefJet 3D printer uses ingredients like cocoa butter and sugar instead of the usual plastic that most 3D printers use.

Food 130

Sustainability Series Op-ed: The Food Tech Revolution

3D Perspectives

The food industry is the largest economy in the world , its market size around €2 trillion in 2015. Cereals are the planet’s primary food source, fish provide three billion people with one-fifth of their animal protein intake, and consumption of dairy and meat is rising.

Food 99

UTSC startup turns food waste into bio 3D printer filament

3D Printing Industry

Genecis, a startup company founded by students and recent graduates of the University of Toronto Scarborough (UTSC), is using current advancements in biotechnology, machine learning and microbial engineering to convert food waste into PHAs. A fully biodegradable form of plastic, PHAs can be used to make more sustainable toys, medical devices and 3D printer filament. […].

Food 82

Print Your City Initiative is 3D Printing Furniture Out of Plastic Waste for Public Spaces in Greece

At this very minute, I am eating a salad I made for lunch, which is inside a plastic dish that used to hold Chinese food. 3D Printing 3D Printing Materials 3d print furniture 3d printed furniture 3d printing furniture 3D printing initiative 3d printing plastic waste coca cola custom furniture greece plastic waste print your city public space robotic arm The New Raw

Make a low cost DIY hydroponics system with 3Dponics modules and used plastic bottles

DIY 3D Printing

I discovered 3DPonics which is modular system of 3d printed elements that enables you to create low cost home hydroponic system for growing plants in used plastic bottles. Growing vegetables in most types of plastic bottles and containers is considered safe.

Is Silicone Safe? Toxicity Information and Food Safety

3D Printing Hub

Ever since plastics were invented, it seems that their applications across different industries only seem to continue to grow. Plastics are cheaper, lighter, easier to manufacture, have higher water resistance, and are more chemically inert than traditional materials like wood or metals. However, not all plastics are made equal, and not all of them are appropriate for more health-sensitive applications such as cooking or baking. What is food-grade silicone?

Food 63


3D Printing Review

Generally speaking, if you want to start 3D printing edible stuff, you need a dedicated, purpose-built 3D food printer. The ones that print plastic aren’t properly equipped to handle foodstuffs, and that’s just the way it goes.

DIMENSIONEXT: Plastic As Currency With 3DP & The Plastic Bank


Plastic As Currency With 3DP & The Plastic Bank. Plastic As Currency With 3D Printing & The Plastic Bank. An amazing initiative by The Plastic Bank is setting up plastic re-purposing centres around the world in places where waste plastic and poverty abound.

All About Polypropylene Plastic

3D Printing Hub

Polypropylene is regarded as the “steel” of plastics because it can be modified and customized in multiple ways to suit a wide variety of applications. It is, in fact, the second-most widely produced commodity plastic.

3D Printing and Food Safety: How to Make Food Safe 3D Prints

3D Printing Hub

Some of the most practical and simple designs made for 3D printing are those made to contain some sort of food or beverage – mugs, plates, bowls, and similar objects. However, have you given some thought to how safe these 3D printing filaments are with respect to coming in contact with your food? In this article, we discuss the potential dangers of using 3D printed food containers, which filament you can use, and the best practices for making food-safe 3D prints.

Food 50

How 3D Printing Will Revolutionize Food

3D Printing Hub

What these skeptics seem to forget is that the vast majority of food companies already make use of complex machinery to create packaged food products, from tortillas to biscuits. Therefore, the ability to make a machine cook a food item already exists. New Age Food Printers.

Food 56

Can Plastic Bags Be Recycled?

3D Printing Hub

Although recent times have seen a massive shift in the attitude of people towards plastic waste, it’s quite apparent that there is still much work to be done. A huge portion of the world’s plastic waste, and the ones that we encounter daily, are plastic bags. From our groceries to dry cleaning bags and the plastic envelopes used for air mail, plastic bags are disposed of practically everywhere. What’s the best way to recycle these plastic bags?

All About Polyester (PET) Plastic

3D Printing Hub

The other popular use of Polyester is in making plastic PET bottles. Polyester or PET has good chemical resistance and does not react with foods and liquids. Food products are also packed using PET jars. The post All About Polyester (PET) Plastic appeared first on 3D Insider.

Recently in…3D Printed Food

The Solidworks Blog

Some futurists believe that growing population figures are going to drastically limit food supplies. If true, humanity will likely turn to technology in hopes of solving the food problem. 3D-printed food could become one of the solutions.

Food 69

The future is still plastics; maybe more than ever

3D Perspectives

In the 1967 movie “The Graduate,” the title character got this career advice: just one word…plastics. Plastic keeps evolving, gaining new properties and new uses. Count on finding more plastic in vehicles. The process doesn’t work if the plastic has exploded or broken to bits.

Polylactic Acid (PLA): The Environment-friendly Plastic

3D Printing Hub

One of the major advantages of PLA is its biodegradable nature and the sustainable process by which it is made, making it the environmentally friendly choice of plastic. Under the right circumstances, PLA can break down into its natural elements in less than a month in contrast to the centuries it will take for traditional plastics to decompose. PLA is especially suitable in short lifespan applications such as in water bottles and food containers. What is PLA?

25% off all the white raw plastic 3D Prints!


This week, Sculpteo offers a very special discount on one of the most-requested 3D Printing Materials: White Plastic! 3D Printed plastic is also perfect for functional parts and assembly. . You can check out on the 3D Printing Plastic Material Page the amazing properties of Nylon! .

All About Polystyrene (PS) Plastic

3D Printing Hub

The result of this reaction is the creation of the plastic that is known as polystyrene. Polystyrene foam is produced by blowing agents into the plastic, which expand and form a foam, which basically consists of trapped air. Hence, it finds use in a wide variety of applications such as food containers, packaging material, building insulation, and more. Food packaging : Polystyrene is extensively used in packaging of food products.

All About Nylon (PA) Plastic

3D Printing Hub

Nylon may not be the most slippery of all the plastics commercially available, but it is still good enough to be used with parts where there is a lot of wear and movement. Nylon can also be mixed and combined with other engineering plastics. Food packaging : Nylon is used to make food packaging films. Production costs can also be kept low as nylon is one of the cheapest plastics available commercially. Nylon (PA) is a silky thermoplastic material.

All About Polyethylene (PE) Plastic

3D Printing Hub

Polyethylene or “PE” is a thermoplastic that also happens to be the most common plastic. It accounts for roughly 34% of the total plastics market. Low-density polyethylene is used in plastic bags and packaging. Low-Density Polyethylene (LDPE) is used to make films, plastic bags, trash bags, and other food packaging material. LDPE, on the other hand, is used to make water pipes and hoses because of its low water absorption and plasticity.

How to Choose Lubricants for Plastics

3D Printing Hub

Lubricants are used in plastics mainly to reduce friction between the processing machinery and the plastic materials. Another reason which may not be apparent is the reduction of friction between the molecules of the plastic materials. The lower the friction between internal molecules, the better the performance and the processing properties of the underlying plastic. At the same time, esters and glycols are not recommended for use with plastics.

How safe is 3D printed plastic for children?


Could you offer a toy made with 3D printed plastic? They must not come in contact with food and drink and should be kept away from any heat sources or electricity.’ Polyamide 2200 is the real name of plastic material that we 3d print at Sculpteo.

Plastic Pellets for 3D Printing: What’s the Point?

3D Printing Hub

In FDM printing, the starting material is typically plastic filament, which is fed into an extruder and a hot end nozzle. This makes the idea of FDM printing using plastic pellets – and not plastic filament – quite interesting. What’s the point of using plastic pellets?

The RoVa-Paste 3D Food Printer


A new and inexpensive 3D food printer has been launched and it could be yours. The RoVa-Paste 3D Food Printer appears on Kickstarter, where the company, ORD Solutions of Ontario, Canada, hope to raise USD$25,000 to get their production line going.

Universal Paste extruder - Ceramic, Food and Real Chocolate 3D Printing.


I decided not to go down that route of molten chambers of chocolate being pumped to a nozzle, it seemed overly complicated and limiting of what foods you could print with. It proved the point that a heated extruder can work with things other than plastic.

3D Printing With Potato Power — Do Potato Based Plastics Work Well As Filament?

3D Printing Review

Nope, not the food or the home runs, but 3D printing with a bioplastic made from potatoes or starches called Biome3D. This bioplastic is made in the northwest of Ireland by Biome Plastics and they sell it through the website, 3DomFilaments.

3D Printable DIY Moka Pot Made with Formfutura Volcano PLA

DIY 3D Printing

The pressure build-up in a closed plastic vessel can be dangerous. 3d printed food coffee food safe household items PLA temperature waterStefan from CNCKitchen in Germany designed and successfully made a fully functional 3d printed coffee Moka pot.

3D Printing With Potato Power — Do Potato Based Plastics Work Well As Filament?

Nope, not the food or the home runs, but 3D printing with a bioplastic made from potatoes or starches called Biome3D. This bioplastic is made in the northwest of Ireland by Biome Plastics and... View the entire article via our website. 3D Printing 3D Printing Materials biome3d filasoy pla potato 3d printing potato-based 3d printing filament

The Future Of Plastics Manufacturing In The U.S.

Design 2 Part News

The future of plastic manufacturing in the United States is far from certain, but many trends are beginning to take shape. plastic manufacturing. While other materials can be used in 3D printing, it’s typically a manufacturing technique used in plastics and resins.

Polylactic Acid (PLA) – An Environment Friendly and Non-Toxic 3D Printing Plastic Material

BIS Research

The supply chain of 3D printing plastics as a 3D printing material include 3D printed parts manufacturers, material suppliers, and end-users. One of the most commonly used 3D printing material is polylactic acid (PLA) and is often used as 3D printing plastic filament, globally.

3D Printing news Sliced: Fiberlogy, Robot Factory, Stratasys, CECIMO and more

3D Printing Industry

This week’s edition of Sliced, the 3D Printing Industry news digest features the first ever PMMA-cast public sculpture in the UK, rapid circuit board construction and the 1,000th patient to receive heart treatment with aid of 3D printing. We also cover Fiberlogy, Robot Factory, Autodesk, Stratasys Direct, BigRep, Reaction Engines, voxeljet, Protolabs and more. Robust materials and continuous 3D printing Polish filament provider Fiberlogy […].

Guide to the Most Common Types of Plastic

3D Printing Hub

By now, we are willing to bet that most of our readers have a better than average familiarity with different types of plastics. From the more popular ABS and PLA to the slightly more exotic PETG and HIPS , plastics have become a definitive part of 3D printing and other popular hobbies. With their low cost and ease of manufacturing, plastics have replaced more traditional materials in various industries such as packaging, plumbing, medical devices, automobiles, furniture, and toys.

FibreTuff opens facility to meet demand for medical-grade 3D printer filament

3D Printing Industry

Innovative Plastics and Molding (IPM), Inc. Materials Center of Innovative Food Technology FibreTuff Innovative Plastics and Molding NAMAS Robert JoyceFibreTuff Medical Biopolymers, a 3D printing biomaterial company based in Ohio, is opening a new facility to manufacture its own brand PAPC filament for medical application. has the exclusive rights with FibreTuff to produce the new material. Robert Joyce, the President of IPM told us that the manufacturing of PAPC […].

Ohio 55

Amphora May Revolutionize 3D Printed Plastics


At this year’s 3D Printshow in London the most important item seen, in our opinion, was the launch of ColorFabb’s Amphora line of plastic filament. Plastics used for 3D printing were in fact, leftover plastics, designed for other purposes that had nothing to do with 3D printing.

Italian Design Student Creates ‘Agridust,’ Uses Food Scraps & Compost for 3D Printing

Ironically, the maker community is made up of a large group of generally ecologically-minded people who are now responsible for making, as well as discarding heaps of plastic filament, not to mention 3D models that... View the entire article via our website.

Food 87

3D Printing News Briefs: October 24, 2017

Featured Stories 3d print spine cage 3D printed floor 3D printed healthcare solutions 3d printed sculpture 3d printed spinal implant 3d printed statue 3D printed surgical implants 3d printing and reverse engineering 3d printing food 3D printing in healthcare 3d printing record Aectual amsterdam bespoke products biomedical 3D printing competition DUS Architects dutch design week einscan EinScan Pro 3D Scanner EinScan Pro.

Now You Can Have Custom 3D Printed Gummy Candy

3D Printer

However, instead of using plastic to print, it uses gum to print one-of-a-kind, personalized designs. Food Video Gallery Gummy printer Katjes videoA German team has gone way beyond gummy bears with a new 3D printer that can custom print yummy, gummy creations.

Video 274

ROKIT Inc. Announces the Release of Two New Non-Toxic 3D Printer Filaments

Despite all the benefits that 3D printing provides, there are risks associated with the technology, particularly when printing with plastic. Plastic in general has never been known as the healthiest. 3D Printing 3D Printing Materials consumer safety food safe filament kitchen and deco kolon plastics non-toxic filament Rokit skinflex south korea toxicity