University of Hong Kong: Sterilization & Infection Rates in 3D Printed Models & Guides Used Intra-operatively

3DPrint.com

Hong Kong researchers explore the use of 3D printed medical models but advance in a more unique direction with concerns over infection. Detailing their findings in the recently published ‘A. View the entire article via our website.

Tech Tip: Fortus 250mc Tip Replacement Instructions

Modern Tech

Like any other piece of equipment, Stratasys Fused Deposition Modeling (FDM) 3D printers also require preventative maintenance from time to time. In our blog, we will walk you through step-by-step Fortus 250mc tip replacement instructions.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Partners of Spanish Hospital Use Stratasys FDM Technology to 3D Print Medical Models

3DPrint.com

3D Printing Medical 3D Printing 3d printed medical model 3d printed models of tumors 3d printed tumor Biodonostia Fortus 450mc patient specific spain stratasys Stratasys FDM 3D printing stratasys fortus 450mc tumorFounded in 2008, Biodonostia Health Research Institute was the very first medical research institute in Spain’s Basque region, and now focuses on research in seven subject areas, from oncology. View the entire article via our website.

Stratasys Announces New Acceleration Kit for Fortus 900

Fisher/Unitech

Earlier this week Stratasys released a new acceleration kit that will get builds in their Fortus 900 machines done faster and more effectively. 3D Printing FDM fortus 900

Looking to 3D Print a Large Hi-Res Plastic Model? Consider the Fortus 900mc

Fabbaloo

Stratasys’ Fortus 900mc is the largest, most accurate 3D printer in the company’s Performance line-up. Read the whole entry. » » printer

Stratasys Announcements Bring Objet1000 Plus to Market and Expand Fortus Material Options

Fisher/Unitech

For both new and seasoned Stratasys Fortus Production Series users, the new Xtend500 system makes operation of your machine much more efficient. With this new setup, a Fortus machine might run for more than 400 hours unattended and use up to 1,000 cubic inches of material.

Qatar University Prepares for 2022 World Cup with 3D Printed Stadium Models

3DPrint.com

We’ve seen, and written about, many cases of architects turning to 3D printing to generate models of planned buildings. The benefits are numerous – 3D printing produces models much faster. 3D Design 3D Printing 2022 World Cup 3d printed stadium 3D-printed architectural models Fortus 400mc qatar Qatar University Stratasys Fortus 400mc Supreme Committee for Delivery and Legacy wind tunnel world cup

Qatar 59

Stratasys Releases Four FDM 3D Printer Enhancements for Use with High-Quality and Demanding Industrial Applications

3DPrint.com

3D Printers 3D Printing 3D Printing Materials Aerospace 3D Printing Business ASA 3D printing material fdm FDM 3D Printer Enhancements Fortus 450mc Fortus 900mc Fused Deposition Modelling PC-ABS 3D printing material Ryan Sybrant ST-130 3D printing material stratasys ULTEM 1010 3D printing materialFDM 3D printing used to be a tool primarily used to rapidly produce prototypes by very large companies that could afford the high price tags that went along with it.

America Makes Announces Complete, Qualified Database of Material Properties for Fused Deposition Modeling® (FDM®) Additive Manufacturing of ULTEM™ 9085 Resin

Additive Manufacturing

The resulting hardware and software enhancements to the Fortus ® 900mc printer, Stratasys Certification Grade Filament, and validated process control documentation enable users to produce high-performance, low-variability printed parts.

Veteran’s Essential Tremor Addressed By Stratasys with 3D Printed Glove at VA Innovation Creation Event

Stratasys Blog for a 3D World

In this clip, veteran Kim Matthews, who suffers from Essential Tremor tries out a stabilizing glove device 3D printed on the Stratasys FDM-based Fortus 3D Printer , with the goal of improving her quality of life. Fortus Fused Deposition Modeling (FDM) Medical Devices Production

Video 109

3D Printing Enables China’s Qingdao Haier Mold to Cut Prototyping Time for Home Appliances by up to 69%

Stratasys Blog for a 3D World

End-use versus 3D printed component, produced with durable ABS-M30 material on the Fortus 900mc from Stratasys. The capabilities of the Fortus 900mc 3D Printer have cut the prototyping time by up to 69% over traditional methods such as CNC machining.

China 107

Not Your Grandfather’s Trepanning – 3D Printing Makes Complex Facial and Skull Surgeries More Effective

3DPrint.com

3D Printing Health 3D Printing 3d printed skulls 3d printed surgical planning models 3d printing medical devices 3D Systems ProJet 160 Stratasys Fortus 400mc trepanning zygomatic bone Trepanning was once the front line treatment for various ailments from seizures to skull fractures to brain disorders. It was pretty grisly stuff, but the work of scientists and medical professionals with 3D printing... View the entire article via our website.

3D printing 10 times cheaper than machining for Moog Aircraft Group

3D Printing Industry

As a solution for spare parts and tooling, fused deposition modeling (FDM) is the 3D printing technology of choice for cutting costs and lead times at factories around the world. Aerospace airplane case study CMM coordinate measuring machines cost saving fixtures Fortus 380 James Stuart-Young jet jigs lead times Lockheed Martin Metrology Moog Moog Aircraft Group Moog Aircrafts Stratasys SYS Systems tooling

SABIC Debuts New Portfolio of High-performance Filaments for Fused Deposition Modeling at RAPID + TCT

Additive Manufacturing

Pittsburgh, Pennsylvania — May 10, 2017 — SABIC , a global leader in thermoplastic technology, unveiled today at RAPID + TCT 2017 a new portfolio of high-performance filament grades for fused deposition modeling.

Stratasys Announces Winners of Its 2014 Southern Asia & Pacific '3D Print Your Design for FREE' Competition

Stratasys Blog for a 3D World

Here are our three winners: Sydney Opera House Sculpture 3D printed on the Fortus 450mc 3D Production System in ASA material. Hannah" produced on a Stratasys Fortus 3D Production System. Electric car model produced using Stratasys FDM-based Fortus 3D Production System.

Asia 107

3D Printed Robotic Gripper: Smarter Design, Faster Delivery, Better Value for Customer

Stratasys Blog for a 3D World

3D printed gripper produced by Digital Mechanics AB of Sweden with the Fortus 3D Production System from Stratasys. But the designers had another plan  to use the Fortus 3D Production System and FDM 3D printing technology for both prototyping and manufacturing of the revised gripper.

Sweden 113

NIAR, SAE International Developing New Polymer 3D Printing Standards for the Aerospace Industry

3DPrint.com

3D Printing 3D Printing Materials Aerospace 3D Printing Business 3d print quality assurance 3D printing polymers 3d printing standards Aerospace industry fdm 3d printing fff 3d printing Fused Deposition Modeling (FDM) fused filament fabrication National Institute for Aviation Research SAE International standards stratasys Stratasys Fortus 900MC 3D printer Stratasys ULTEM 1010 ULTEM 9085 Wichita State University WSU/NIAR

3D Printing: The Stories We Missed - March 4, 2017

3DPrint.com

Featured Stories 3d print lens 3d printed aircraft parts 3d printed eyewear 3d printed lenses 3d printed medical models 3D Slash 3D Slash 3.0 3d systems conjoined twins Fleet Readiness Center Southeast Fortus 3D printers imakr industry partnerships Ingeo Ingeo 3D870 Innofil3D Inofil3D iso standards luxexcel NatureWorks new zealand RAM3D Renishaw STARTT stratasys The Children's Hospital at Montefiore tractus3d Ultem

Complex Geometries and Material Properties of Stratasys 3D Printing Enable Unique Coral Structures for Sony Underwater Store

Stratasys Blog for a 3D World

Sony’s unique retail experience in Dubai required scuba gear to get there and featured 3D printed displays created on Stratasys Fortus 3D Production Systems to hold the merchandise. Paradigm 3D has both Stratasys Fortus 400mc and Fortus 900mc 3D Production Systems.

3D Printing Enables More Precise Surgical Implants for Orbital Eye Operations

Stratasys Blog for a 3D World

Now Hong Kong Polytechnic University ’s Industrial Center (IC) is using 3D printed models to improve eye orbital implant surgery accuracy and reduce operating times. The Fortus’ material options played a key role in improving surgeries.

Codename Colossus: This 3D Printed Hexapod Robotic Toy Features 435 Hand-Painted Parts

3DPrint.com

Once you get into a project and really start pumping, the pressure you can put on yourself to get an intricate model just right can be far greater–and more motivating–than that of anyone else.... 3D Design 3D Printing 3d printed electronics 3d printed hexapod 3d printed robot 3d printed toy codename colossus Machination Studios singapore Stratasys Fortus 250mc

Personalizing New Daihatsu Copen Robe Roadster Design with Stratasys 3D Printing

Stratasys Blog for a 3D World

Sun will deliver a lecture on his use of a Fortus 450mc 3D Production System in the creation of the Copen’s 3D printed design elements. Automotive Fortus Fused Deposition Modeling (FDM) Production

Japan 105

New FDM 3D Printer Enhancements Make Stratasys Solutions Stronger, Simpler and Faster for Demanding Industrial Applications

Additive Manufacturing

The new sacrificial tooling solution is available for the Fortus 450mc and 900mc 3D Printers. To reduce production time and cost for both parts and tooling, Stratasys is introducing the Fortus 900mc Acceleration Kit.

New UV-Resistant ASA Thermoplastic Expands 3D Printed Outdoor Applications, Introduced at IMTS

Stratasys Blog for a 3D World

Compatible with the Fortus 360mc, 400mc and 900mc 3D Production Systems, ASA thermoplastic surpasses the capabilities of ABS, offering UV resistance so parts will be durable and resist fading even with long-term exposure to direct sunlight. Fortus Fused Deposition Modeling (FDM

Don Schumacher Racing Shifts into Overdrive with Additive Manufacturing from Stratasys

Additive Manufacturing

The team will capitalize on advanced Fused Deposition Modeling (FDM®) technology to accelerate both prototyping and new component design. Stratasys, the Stratasys signet, FDM, Fortus, F370, FDM Nylon 12, and 450mc are trademarks or registered trademarks of Stratasys Ltd.

Stratasys 3D Printing Speeds into NASCAR with Joe Gibbs Racing

Stratasys Blog for a 3D World

The Fortus 400mc 3D Production System allows JGR to 3D print parts both for functional testing and for end-use parts for their cars. Automotive Connex Fortus Fused Deposition Modeling (FDM) PolyJet

United Launch Alliance to Launch Atlas V Rocket with Stratasys 3D Printed Parts, Enjoying Production Time & Costs Savings

Stratasys Blog for a 3D World

Kyle Whitlow, ULA Structural Engineer, holding the ECS duct produced on the Fortus 900mc 3D Production System (in background). The ECS ducts are printed on the company’s two Fortus 900mc 3D Production Systems from Stratasys in ULTEM 9085 material.

Helicopter Blade Prototype Tooling Costs Reduced By 70% with Stratasys 3D Printed Soluble Cores

Stratasys Blog for a 3D World

Working with Stratasys FDM-based (Fused Deposition Modeling) 3D Printing, the team used a 3D printed soluble core application to deliver a robust composite prototype of a helicopter blade, in the process saving 60-70% in tooling costs.

Atlas V Rocket Launched Using Stratasys 3D Printed Parts on Mission to Resupply the ISS

Stratasys Blog for a 3D World

ULA’s facility in Decatur, Alabama, built the rocket from the ground up and relied on Stratasys’ Fortus 900mc Production 3D Printer to create everything from tooling and support equipment to production parts. Stratasys and Fortus are registered trademarks of Stratasys Ltd.

A Strong Case for 3D Printing: R&D Technologies Helps an Active Child with Diabetes Stay Active

Stratasys Blog for a 3D World

The 3D printed device, seen above in orange, was printed with FDM technology on the Fortus 250mc in ABSplus material. They modified the existing CAD file and produced the device on the Stratasys Fortus 250mc 3D Printer in ABSPlus in Matt’s favorite color, orange.

Stratasys 3D Printing Keeps NASA Satellite On Time and On Budget – FDM Strong Enough for Space

Stratasys Blog for a 3D World

The antenna arrays will capture atmospheric and ionospheric data to help improve weather prediction models and advance meteorological research on Earth. Stratasys Direct Manufacturing built the custom-designed parts using FDM-based Fortus 900mc 3D Production Systems from Stratasys.

Stratasys’ 3D Printing of Prosthetic Devices Spurs Innovation for Veterans at VA Make-a-thon

Stratasys Blog for a 3D World

“It’s been very beneficial to have Stratasys and their 3D printers involved in the event…the teams can co-create and iterate with Stratasys 3D printed models to build matching designs.”-Andrea The fairings were 3D printed on the Fortus 450mc in ABSplus.

Three Wheels & Two Seats: Will the 3D Printed Urbee 2 Be Your Car of the Future?

3DPrint.com

” We’ve come a long, long way from the Model T. 3D Design 3D Printing 3D printed automobiles 3D printed cars 3d printed vehicles Guinness Book of World Records Kor Ecologic Stratatys Stratsys Fortus 900mc Urbee Urbee 2“Say hello to Urbee. One day, all cars will look like this.” And if you think about it, our cars play a huge part in the journeys of our. View the entire article via our website.

Space Station's Mobile Freezers a Challenge Only Solved with 3D Printing’s Unique Thermal, Tensile and Geometric Properties

Stratasys Blog for a 3D World

The inner liner was produced with Fused Deposition Modeling (FDM) 3D printing technology on the Fortus 900mc 3D Production System by Stratasys in ULTEM 9085 material. Aerospace Fortus Fused Deposition Modeling (FDM) Production

3D Printed Thermoplastics versus Metal: Why Volvo Trucks Chose Additive Manufacturing for 30 Engine Assembly Tools

Stratasys Blog for a 3D World

ABS Automotive Fortus Fused Deposition Modeling (FDM) Production You have to be tough and efficient to be a Volvo Truck engine. These ultra-reliable paradigms of automotive innovation are built for the long haul with maximum productivity.

Stratasys 3D Printing Allows Normal to Design, 3D Print and Deliver Customized Earphones in 2 Days!

Stratasys Blog for a 3D World

Ten Stratasys Fortus 250mc 3D Printers producing customized earphones at the Normal store in New York City. Ten FDM-based Fortus 250mc 3D Printers from Stratasys line the perimeter of the store so customers can see the digital manufacturing process firsthand.

World’s First Jet-Powered, 3D Printed UAV Tops 150 MPH with Lightweight Stratasys Materials

Stratasys Blog for a 3D World

Aurora was able to reduce time-to-market by cutting design and build time by 50% using Stratasys’ Fused Deposition Modeling (FDM) 3D printing technology. Aerospace Fortus Fused Deposition Modeling (FDM) Production

Stratasys Additive Manufacturing Chosen by Airbus to Produce 3D Printed Flight Parts for its A350 XWB Aircraft

Stratasys Blog for a 3D World

Aerospace Engineering Plastics Fortus Fused Deposition Modeling (FDM) ProductionThe Airbus A350 XWB aircraft contains more than 1000 flight parts 3D printed on Stratasys FDM Production Systems.

Lamborghini Accelerates and Perfects Automotive Engineering with Stratasys 3D Printed Prototypes and Track-Ready Parts

Stratasys Blog for a 3D World

We use our Fortus 3D Production Systems to typically – but not exclusively – produce high-performance aesthetic parts, including profiles and air conducts.”. Automotive Fortus

Stronger, More Colorful Prototypes, End Use Parts with New 3D Printing Materials

Stratasys Blog for a 3D World

ASA thermoplastics are compatible with the Fortus 360mc, 380mc, 400mc, 450mc, and 900mc 3D Production Systems. Fortus Fused Deposition Modeling (FDM) Opaque Production Color ASA Thermoplastics allow you to bypass further painting or finishing steps, saving time and money.

3D Printing Beats Steel for BMW Prototype: Clemson University Saves 75% on Costs for Deep Orange Project

Stratasys Blog for a 3D World

Stratasys Direct Manufactuing’ 3D printed prototypes, produced on the Fortus 900mc 3D Production System, installed on car frame. Fortus 900mc 3D Production System from Stratasys. 3D Printing Automotive Fortus Fused Deposition Modeling (FDM) Production

Streamlined Kitesurfing Board Uses Stratasys 3D Printed Parts To Attempt Record Channel Crossing

Stratasys Blog for a 3D World

The team’s unique kitesurfing boards were produced by 3D printing using a Fortus 3D Production System by Stratasys. ABS Consumer Products Education Fortus Fused Deposition Modeling (FDM) Production

Stratasys Speeds Access to Advanced 3D Printing with 11 New High Performance Products at EuroMold 2014

Stratasys Blog for a 3D World

Fortus 450mc 3D Production System features touch-screen interface for improved productivity and ease of use. New Fortus Systems Combined with New Material for Manufacturing Success. Connex Desktop Digital Eden Engineering Plastics Flexible Fortus

Food 113