Georgia Tech aims to scale micro 3D printing and produce ant robot army

3D Printing Industry

Barely visible to the human eye, a breed of microscopic 3D printed robots has been developed at Georgia Institute of Technology. Research Azadeh Ansari DeaGyu Kim Georgia Institute of Technology Georgia Tech Jun Ueda micro-bristle-bots TPP two photon polymerization Zhijian Hao

Georgia Tech develops a fast nano 3D printing technique using supersonic gas jet

3D Printing Industry

Researchers at the Georgia Institute of Technology have developed a faster method of nano 3D printing with focused electron beams. Research 3D nanofabrication 3D nanoprinting Adatom direct-writing method DIW FEBID Georgia Institute of Technology Georgia Tech nano 3D printing non-equilibrium adatom state rapid additive nanofabrication supersonic jets

Trending Sources

Georgia Tech and Beida 3D print engineering strength origami

3D Printing Industry

A 3D printing research collaboration between Georgia Institute of Technology and China’s Peking University (Beida) has yielded transformable structures that can support up to 100 times their own weight. Research Beida Daining Fang Georgia Institute of Technology Georgia Tech Glaucio H.

Wireless monitoring of blood flow enabled by Georgia Tech’s implantable aerosol jet printed biosensor

3D Printing Industry

Researchers from the Georgia Institute of Technology and Hanyang University, Korea, have developed the first aerosol jet printed (AJP) biosensor for wireless monitoring of blood flow. Research Aerosol Jet Printing AJP biosensors Georgia Institute of Technology Hanyang University hemodynamics implantable tech inductive coupling Wearable Tech

3D Printed Micro Robot by Georgia Tech

DIY 3D Printing

More details about the project: [link]. 3d printed robot drone nanobots

Georgia Tech, UConn, and UMass Lowell establish 3D printing research center

3D Printing Industry

The Georgia Institute of Technology, University of Connecticut (UCONN), and the University of Massachusetts Lowell are collaborating to establish a National Science Foundation (NSF) Industry/University Cooperative Research Center (I/UCRC) for 3D printing. Research Anson Ma Georgia Institute of Technology Industry/University Cooperative Research Center Joey Mead National Science Foundation Science of Heterogeneous Additive Printing of 3D Materials SHAP3D University of Connecticut

Georgia Tech researchers use salt to 3D print bone-like and conductive components in DLP

3D Printing Industry

Woodruff School of Mechanical Engineering at Georgia Institute of Technology (Georgia Tech) in Atlanta, demonstrates a method combining 3D printing. Saldana Christopher Saldana Conner Dunn digital light processing DLP droste effect flexible electronics Georgia Institute of Technology Georgia Tech H. Research from the George W.

UL and Georgia Tech Continue Research Into Impact of 3D Printing Emissions on Indoor Air Quality

3DPrint.com

In 2015, non-profit safety science company Underwriters Laboratories (UL) and its Chemical Research Initiative, the Georgia Institute of Technology (Georgia Tech), and Emory University Rollins School. 3D Printing 3D printer emissions 3d printers safety 3D printing emissions 3d printing safety air quality ansi desktop 3d printers Dr. Marilyn Black Georgia Institute of Technology Georgia Tech research paper safety standard study ul ultrafine particles volatile organic compounds

University of Georgia uses 3D printing to create arm brace for running back Sony Michel

3D Printing Industry

The University of Georgia (UGA) has documented its use of a 3D printer to create an arm brace for running back Sony Michel. Sports 3D printed brace American Football football Georgia Bulldogs MIchel Ron Courson Sony Michel UGA University of GeorgiaIn a short.

Georgia Tech 3D prints unique heart for biomedical research

3D Printing Industry

Medical & Dental 3d printed heart Chuck Zhang Georgia Tech heart heart valve Piedmont Heart Institute Zhen QianIf a heart beats an average of 80 times per minute, 4,800 times in an hour, it’s understandable that over time, some parts will become.

Georgia Tech Design Entrepreneurs: “Design, Print, Profit”

Shapeways Blog

This is a guest post by Georgia Tech student, Josh Dycus. Design, Print, Profit is showcasing a series of rings made my Georgia Tech students this Friday.

Hear Ye! Georgia Tech PhD Student Puts Finishing Touches on 3D Printed Trumpety Trefoil

3DPrint.com

3D Design 3D Printing 3D printed mathematical concept 3D printed trefoil knot Fred Hohman Frederick Hohman Georgia Tech thingiverse trefoil trefoil knot University of GeorgiaMost of us are familiar with the design of the trefoil knot, relied on as crucial to the fundamentals of mathematics in its simplicity as well as an iconic symbol and motif throughout the... View the entire article via our website.

10,000 Hours of 3D Printing Bring Larger-Than-Life Cast Bronze Sculpture to Georgia Tech

3DPrint.com

3D Design 3D Printed Art 3D Printers 3D Printing 3d printed art 3D printed casting 3D printed metal casting 3d printed sculptures 3d printing for casting bronze cast bronze casting bronze sculpture Georgia Tech investment casting Julian Voss-Andreae lulzbot lulzbot taz Lulzbot TAZ 3D printer metal casting

3D printed tracheal splints used in pediatric surgery

3D Printing Industry

Children’s Healthcare of Atlanta (CHoA) and the Georgia Institute of Technology (Georgia Tech) have successfully used 3D printed tracheal splints in the pediatric surgery of a 7-month old patient with a life-threatening airway obstruction. The surgeons of CHoA used three custom-made splints, which were made by biomedical engineers of Georgia Tech.

Failure Teaches the Best Lessons -- A Few Questions For: Georgia Tech's 3D Printed Racing Bike Team

3DPrint.com

Featured Stories 3d printed amphora 3d printed bicycle 3d printed bike 3d printed racing bicycle 3d printing bicycles A Few Questions For bicycle colorfabb colorfabb XT-CF20 custom bicycle Eastman Amphora Eastman Innovation Lab Georgia Tech Kevin Shankwiler lulzbot ultimaker XT-CF20 carbon fiber filament“Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better.”

University of North Georgia, Well-Versed in 3D Printing, Opens the State's First MakerBot Innovation Center

3DPrint.com

3D Printers 3D Printing Education 3d printed assistive devices 3d printing in education assistive devices makerbot makerbot innovation center MakerBot Innovation Center Management Platform makerbot innovation centers UNG MakerBot Innovation Center university of north georgiaAs they say in the business, the show must go on. Not long after well-known desktop 3D printer manufacturer MakerBot announced its latest major executive-level change-up, the University of North.

3D printed heart valve could improve heart surgeries of the future

3D Printing Industry

Georgia Institute of Technology researchers, together with the Piedmont Heart Institute, have created a patient-specific heart valve model using a 3D printer. Medical & Dental 3d printed heart 3D printed heart valve Chuck Zhang Georgia Institute of Technology Georgia Tech paravalvular leakage Piedmont Heart Institute TAVR transcatheter aortic valve replacements Zhen Qian

DARPA to push limits of CAD design with multimillion dollar research program

3D Printing Industry

Siemens, the Georgia Institute of Technology, Michigan State University (MSU) and PARC have been chosen to work on DARPA's TRAansformative DESign (TRADES) research program. 3D Software DARPA Dr. Suraj Musuvathy FIELDS Georgia Institute of Technology Georgia Tech Michigan State University PARC PLM Saigopal Nelaturi Siemens Siemens NX Suraj Musuvathy TRAansformative DESign TRADES

Research uses 3D printer to create shape-shifting tensegrity structures

3D Printing Industry

Researchers from Georgia Institute of Technology have used 3D printers to create tensegrity objects which can change shape. Research 3D print tensegrity 3D printing tensegrity Georgia Institute of Technology Georgia Tech Glaucio Paulino Jerry Qi Kurilpa Bridge tensegrity tensile tensile strength tensional integrityThe 3D printed structures are capable of.

Georgia Tech Research: Desktop FDM 3D Printing Particle Emissions May Be Dangerous to Humans

3DPrint.com

Sometimes 3D printing may seem to be almost too good to be true, offering what can sometimes be astounding benefits in affordability, production of speed, self-sustainability, and savings in. View the entire article via our website. 3D Printing 3D printing particle emissions 3d printing research 3D printing toxins abs fdm 3d printing pla

3D Printing Health Risks Identified by UL and Georgia Tech

Fabbaloo

Researchers investigating 3D printer particle emissions [Source: Vimeo]. It’s been known. Read the whole entry. » » research

3D Printing Health Risks Identified by UL and Georgia Tech

Fabbaloo

3D printer particle emissions [Source: YouTube]. It’s been known for several years that desktop. Read the whole entry. » » learning

3D printed moth antennae uses smell to detect drugs and explosives

3D Printing Industry

Hu detection explosives gas Georgia Institute of Technology Georgia Tech moth moths nanolithography Nanoscale Nanoscribe Nickolay Lavrik Oak Ridge National Lab odor polyphemus moth sensors Thomas L. In a life-critical situation man-made sensors can take minutes to detect the presence of gas or explosives in the air. A moth however is able. Research David L.

3D Printing News Sliced: Pier 9, HP, Johnson Matthey and Tiangong II

3D Printing Industry

In today’s Sliced 3D printing news digest: Renovis Surgical Technologies, Autodesk Pier 9, PrintMyRoute, University of Otago, HP, the University of Illinois at Urbana-Champaign, Narbon, Tiangong II, the Australian National University, Make to Care contest, the C-Turtle, Johnson Matthey, Rutgers University-New Brunswick and Georgia Institute of Technology.

GeorgiaTECH put a cat amongst the pigeons with 3D printing soft robotics research

3D Printing Industry

Research alexis noel cat cat tongue cats Georgia Institute of Technology Georgia Tech GeorgiaTech Harvard jennifer lewis robotics robots soft robotics SoftRobotics velcroGeorgiaTECH PhD student Alexis Noel has been studying the adhesive properties of animal tongues for over two years. Originally her research focused on the sticky.

Study simplifies 4D printing process for self-assembling objects

3D Printing Industry

Research 4d printing Chao Yuan Georgia Institute of Technology Georgia Tech H. A study published in Science Advances demonstrates a way of creating 3D printed shapes that assemble when exposed to heat. The study proposes a simplified process. Jerry Qi Martin L. Dunn School of Aerospace Engineering self-assembly Singapore University of Technology and Design Skylar Tibbits smart material smart materials Tiejun Wang Xirui Peng Zhejiang University Zhen Ding

Study 87

Technology Association of Georgia to Present Seminar on…

Design 2 Part News

“Technology Association of Georgia to Present Seminar on “On-Shoring”. The Technology Association of Georgia (TAG) Manufacturing Society will present a breakfast seminar, “On-Shoring – Bringing Manufacturing Jobs Back to America” on Thursday, March 26, 2015 at the Cobb Galleria Centre in Atlanta, GA. Karen Fite, Director, Georgia Manufacturing Extension Partnership. About The Technology Association of Georgia (TAG).

LLNL stainless steel 3D printing “better than traditional manufacturing”

3D Printing Industry

Hamza Ames National Laboratory Georgia Tech Georgia Tech University Jianchao Ye Joseph T. In a recent study led by Lawrence Livermore National Laboratory (LLNL), scientists have discovered a way of making stainless steel two to three times stronger than usual. The method takes advantage of the unique grain structure of stainless steel parts when 3D printed using powder bed fusion (PBF) technology. Though the goal of the research was […]. Materials Alex V.

Print Form inspires InspireX strategic investment

3D Printing Industry

The 3D printing bureau, based in Atlanta, Georgia, offers both advanced manufacturing and consultancy services. Business Atlanta Brian Ford CJP DLMS FDM Georgia InspireX PolyJet Print Form SLA SLS Wipro Wipro3DPrint Form, a service bureau offering custom manufactured plastic and metal parts on demand has received an undisclosed strategic investment from InspireX Ventures.

MesoScribe 3D printed electronics earns $4.7M development grant from DOE

3D Printing Industry

Research CVD Equipment Corporation Georgia Institute of Technology Jeff Brogan Karen A. CVD MesoScribe Technologies Corporation, a subsidiary of New York’s CVD Equipment Corporation, along with 4 other collaborators has been awarded $4.7 million to develop its electronics 3D printing technology as part of a project led by Pennsylvania State University. Funding was provided by the U.S.

Researchers Make Strong, 3D Printed Expandable Origami Structures for Engineering Applications

3DPrint.com

A collaborative team of researchers from the Georgia Institute of Technology, the Beijing Institute of Technology, and Peking University are using 3D printing to directly build reconfigurable origami. 3D Printing 3D Printing Materials Science & Technology Beijing Institute of Technology Digital Light Processing dlp dlp 3d printing expanding polymers Georgia Institute of Technology journal article Origami origami and 3d printing Peking University research paper

RIZE One certified as supporting “healthier indoor environments” in 3D printing by UL

3D Printing Industry

Legal and Regulatory Alberto Uggetti ANSI/CAN/UL 2904 Georgia Institute of Technology Rize Rize One UL UL 2904 UL 2904 GREENGUARD CertificationBoston-based 3D printer manufacturer RIZE has announced that it has received the UL 2904 GREENGUARD Certification for its RIZE One 3D printer and filament.

UL publishes ANSI/CAN/UL 2904 standard for assessing 3D printing chemical emissions

3D Printing Industry

Legal and Regulatory ANSI/CAN/UL 2904 Georgia Institute of Technology Marilyn Black Philip Piqueira ULUL, a global safety consulting and certification firm based in Illinois, has published the “Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers.” ” The first edition of this document, ANSI/CAN/UL 2904, is to be used by stakeholders seeking to mitigate indoor air pollution risks from 3D printer emissions.

FDA awards $2.6M in grants for 3D bioprinting and biomedical research

3D Printing Industry

Research 21st Century Cures Act Breakthrough Devices program Carnegie Mellon University Cures Act Food and Drug Administration Georgia Institute of Technology Harvard University Massachusetts Institute of Technology Regenerative Medicine Advanced Therapy Rutgers University Scott GottliebThe U.S Food and Drug Administration (FDA) has awarded grants to five research institutes for the study and improvement of biomanufacturing, including 3D bioprinting.

Study 86

Is 3D printing safe? UL publishes Safety Science of 3D Printing

3D Printing Industry

3D Printing Emory University Rollins School of Public Health Georgia Institute of Technology Illinois Institute of Technology Marilyn Black Underwriters LaboratoriesThe results of a 2 year investigation looking at desktop 3D printer emissions are now available. Published as the proceedings of the Safety Science of 3D.

Powerful New 4D Printer Speeds Next-Generation, Next-Dimension 3D Printing

3DPrint.com

3D Printers 3D Printing 3D Printing Materials Science & Technology 3d printed self assembly research 3D printing methods 4d printer 4d printing 4D printing technology american chemical society Georgia Institute of Technology Georgia Tech multimaterial 3d printing prosthetic hands research paper self-assembling technology SMPs

UV Assisted Direct Ink Writing of 3D Printed and “4D Printed” Shape Memory Epoxy Parts

3DPrint.com

3D Printing 3D Printing Materials 3d printing research 4d printing 4D printing technology direct ink writing DIW Georgia Institute of Technology Southwest Jiaotong UniversityThe magic of 3D printing has touched most of us in some way by now, as schools in many countries are establishing programs, libraries offer makerspaces for patrons, and designers like architects show. View the entire article via our website.

University of Pittsburgh awarded over $1 million to develop quality assurance for 3D printed turbine components

3D Printing Industry

Research Albert To ansys DOE Dr. Zhao Georgia Institute of Technology HGPTC hot gas path turbine components Laser Powder Bed Fusion LPBF Richard W. Researchers from the Swanson School of Engineering have received over $1 million in combined funding from the U.S. Department of Energy (DoE) and the University of Pittsburgh. The funding is intended to support the development of an effective quality assurance method for the additive manufacturing of new-generation gas turbine components.

3D Printing news Sliced, GE Additive, Sketchfab, FILOALFA and Tecnun

3D Printing Industry

Materials 4d printing Alban Denoyel AR Augmented Reality Bionic Aircraft CATIA CENIT Ciceri de Mondel Concept Laser MLAB cusing 100R Filoalfa GE Additive Georgia Institute of Technology H. Today’s Sliced answers the questions: what is 4D printing? How does it compare to 3D printing? Will we soon be riding bionic aircraft? All this and more from GE Additive, Sketchfab, FILOALFA and Tecnun.

3D printed microneedles present pain-free alternative to syringes

3D Printing Industry

Berry drug drug delivery Emory University FDA FFF Georgia Institute of Technology Jeremiah J. With an FFF 3D printer researchers at the University of Texas at Dallas (UT Dallas) now have a new low-cost method of making microneedle arrays – a small syringe-alternative patch for administering drugs. The method combines a commercially available desktop 3D printer with a chemical etching technique. It enables the creation of ultra-fine microscopic pins in a […].

3D Printing Research CrAMmed: WFIRM, Argonne National Laboratory, Siemens

3D Printing Industry

Langer Embry-Riddle Aeronautical University Farui Du Faten Zahran FEA Georgia Tech Guoyu Wang James J. 3D printing is empowering researchers and inventors from all disciplines to investigate applications that cannot be done with any other technology. As such, with CrAMmed, 3D Printing Industry has started a regular review of the literature available on the topic to deliver the most cutting edge developments to our readers. In this edition we feature […].

Researchers Use Sensors, Microphones, and Nanoparticles to Develop Three Methods to Combat 3D Printer Cyberattacks

3DPrint.com

3D Printers 3D Printing 3D print defects 3D printer firmware 3D printer hacking 3d printer software 3d printing security 3d printing study attacks on 3D printing cyberattacks cybersecurity defects in 3D printing Georgia Institute of Technology Georgia Tech hacking medical 3d imaging research paper rutgers Rutgers University-New Brunswick security measures study USENIX Security Symposium

UL Study Releases Data on Effects of 3D Printing on Human Health, Calls for New Standards

3DPrint.com

3D Printers 3D Printing 3D Printing Materials 3D printer emissions 3D printing emissions 3d printing safety 3d printing standards ansi Dr. Marilyn Black emissions Emory University Emory University Rollins School of Public Health Georgia Institute of Technology Georgia Tech standards ul ultrafine particles underwriters laboratories volatile organic compounds3D printing is a new enough technology that there’s still plenty of debate about how safe it is, on a number of levels.

Data 63