ActivArmor expands portfolio of 3D printed orthoses with Jacksonville Orthopaedic Institute

3D Printing Industry

ActivArmor, a Colorado-based manufacturer of 3D printed orthoses, an external device which supports the limbs or spine, has expanded its operations as a result of its partnered with Jacksonville Orthopaedic Institute (JOI). Medical & Dental ActivArmor Diana Hall Jacksonville Orthopaedic Institute Kevin Kaplan

Materialise 3D Prints Huge Jaguar for Jacksonville Jaguars Owner’s Superyacht

Khan, the Pakistani-American billionaire who owns NFL team the Jacksonville Jaguars, former English Premier... View the entire article via our website. 3D Design 3D printed art 3D Printing Espen Oeino huge jaguar Jacksonville Jaguars mammoth 3d printer Mammoth Stereolithography materialise mega yacht Shahid "Shad" Khan yacht In the world of very, very rich people, Shahid “Shad” Khan is very near the top of the pecking order.

Mayo Clinic: Considerations & Cautions in Pandemic Times Regarding 3D Printed PPE

Martin, all medical researchers from the Mayo Clinic in Jacksonville, FL, discuss the lack of medical devices during the COVID-19 pandemic, as well. William Clifton, Aaron Damon, and Archer K.

3D Printing: The Stories We Missed This Week — July 23, 2016

Welcome to another jam-packed edition of “3D Printing: The Stories We Missed This Week,” featuring exciting 3D printing news from all over the world that we just didn’t have time to cover over the. View the entire article via our website.

Made In Space explain how 3D printing is advancing the space industry

3D Printing Industry

3D Printing Industry asked Justin Kugler, business development engineer at Jacksonville Florida’s Made in Space about plans for the future of additive manufacturing in space. Aerospace bodyTop archinaut Axiom Space ISS justin kugler Made in Space Nasa

US Navy 3D prints first aircraft component

3D Printing Industry

The US Navy's Fleet Readiness Center Southeast (FRCSE) based in Jacksonville, Florida, has 3D printed a part for use inside a T-44 Pegasus airplane. FRCSE Commanding Officer. Aerospace bodyTop air duct aircraft Capt. Chuck Stuart Fleet Readiness Center Fleet Readiness Center Southeast FRCSE navy Randy Meeker Spare parts T-44 T-44 Pegasus ULTEM ULTEM 1085 US Navy

Criminals Beware: 3DE is Bringing New Evidence Before the Jury with 3D Printed Replicas

It would appear that the technology of 3D printing is going to be summoned to court on a regular basis, if Jacksonville, Florida-based 3D Printed Evidence has their way.

Two Scholarships Offered to Attend AMUG 3D Printing Conference 2015

3D Printing Industry

The Additive Manufacturing Users Group has just announced two new scholarships being offered to attend their 2015 AMUG Conference April 19th – 23rd in Jacksonville, Florida. By Scott J Grunewald.

Chris Scott – From SWW Virgin to Addict

Jeff's Tool Shed

Once again this year, SolidWorks held their Internet Correspondent contest and the winner was Chris Scott from Jacksonville, Florida. That, for this post, is neither here nor there. Chris fulfilled a need I had; to interview someone who had never been to SolidWorks World before. While I remember my first time (who doesn’t?), I wanted […]. The post Chris Scott – From SWW Virgin to Addict appeared first on Jeff's Tool Shed.

3D Printing for Space Engineers

3D Systems

All 3D printing is done on the ProJet 4500 , on location at FORGE in Jacksonville, FL. 3D Printing for Space Engineers Monday, February 2, 2015 - 11:16 A good video game draws its players in, so why not allow players to reverse roles and pull digital elements into the physical world?

Redwire Acquires Made In Space, the Leader in On-orbit Space Manufacturing Technologies

Additive Manufacturing

Headquartered in Jacksonville, Florida, MIS has additional offices in California, Alabama, and Ohio.

Get the latest 3D printing developments at the AMUG and RAPID Conferencess

Leslie's Blog

This year, the first one up is The Additive Manufacturing Users Group (AMUG) Education & Training Conference , which will be held in Jacksonville, Florida, from April 19 – 23, 2015. For the professional user of additive manufacturing systems, there are two key conferences.

Made In Space Announces Appointment of President & CEO Andrew Rush As Chairman of NASA Advisory Council Regulatory and Policy Committee

Additive Manufacturing

JACKSONVILLE, Fla., April 27, 2020) — Made In Space, Inc. ( MIS ), the industry leader for space manufacturing technology, today announced that the company’s President & CEO Andrew Rush has been appointed to serve as a representative member on the NASA Advisory Council (NAC) and as Chair of its Regulatory and Policy Committee for a three-year term. Rush was appointed by NASA Administrator Jim Bridenstine on February 26, 2020. “It

AMUG-Additive Manufacturing Users Group Conference Opens Registration

Additive Manufacturing

CHATSWORTH, California, September 9, 2014 – The Additive Manufacturing Users Group ( AMUG ) today announced that online registration is now available for its 2015 Education & Training Conference , which will be held in Jacksonville, Florida, from April 19 – 23, 2015.

AMUG-Innovators Showcase to Feature Chuck Hull

Additive Manufacturing

The on-stage interview of Mr. Hull will be one of over 200 information exchange activities at the 27 th annual AMUG Conference, which will be held April 19 – 23, 2015, in Jacksonville, Florida. Jacksonville, Florida.

AMUG-Additive Manufacturing Users Group Announces Keynote Speakers for 2015 AMUG Conference

Additive Manufacturing

8, 2015 – The Additive Manufacturing Users Group ( AMUG ) today announced its featured keynote speakers for the 2015 AMUG Education & Training Conference , which will be held in Jacksonville, Florida, from April 19 – 23, 2015. Jacksonville, Florida USA.

AMUG-Additive Manufacturing Users Group Awards Eight Coveted DINOs

Additive Manufacturing

The awards were presented at the 27th annual users group conference in Jacksonville, Florida. High honor recognizes experience and service. CHATSWORTH, CALIF.,

AMUG-Additive Manufacturing Users Group Announces New Board

Additive Manufacturing

Elected by AMUG members during the annual business meeting held at the 2015 AMUG Conference in Jacksonville, Florida, the board’s primary responsibility will be to oversee the April 2016 conference. Members cast vote of confidence with re-election. CHATSWORTH, CALIF.,

Designer Spotlight: Lucas Goossens

Shapeways Blog

Well, my name’s Lucas, and I come from a small historical town called Jacksonville, Oregon.

GE Completes Proposal Submission for U.S. Army’s Improved Turbine Engine Program

Additive Manufacturing

Jacksonville, Fla.; LYNN, Massachusetts – July 17, 2018 – GE Aviation submitted its Improved Turbine Engine Program (ITEP) technical proposal last month, which is the second and final phase of its Engineering and Manufacturing Development (EMD) proposal to the U.S.

Behind the Product with Corinne Whitaker

Shapeways Blog

“Virtually Solid: Digital Fabrication as Sculpture” at Wilson Center of the Arts, Florida State College 11901 Beach Blvd, Jacksonville, FL January 2016. Today we are showcasing, Corinne Whitaker, a pioneer in the digital arts.

AMUG-Additive Manufacturing Users Group (AMUG) Names Technical Competition Winners

Additive Manufacturing

The awards were presented at the 27th annual users group conference in Jacksonville, Florida. CHATSWORTH, CALIF., May 13, 2015 – The Additive Manufacturing Users Group ( AMUG ) today announced recipients of awards for technical skill.

Renishaw- Crossing the Atlantic in RAPID time

Additive Manufacturing

Last month, Renishaw supported Additive Manufacturing Users Group (AMUG), the highly respected, independent additive manufacturing conference that took place in Jacksonville, Florida. Metal additive manufacturing expert shows commitment to US market.

GE and the U.S. Army Conduct T901 Preliminary Design Review for Improved Turbine Engine Program

Additive Manufacturing

Jacksonville, Fla.; By Dave Wilson | | GE Aviation. LYNN, Massachusetts – April 25, 2018 – GE Aviation hosted the U.S. Army for the successful Preliminary Design Review ( PDR ) of the T901 -GE-900 engine in early March.

GE Celebrates Grand Opening of First Additive Manufacturing Center in Pittsburgh

Additive Manufacturing

Facility represents $39M commitment to Pennsylvania and creates 50 jobs. Advanced manufacturing’s impact on the economy is $3.1T or 19% of US GDP. GE is ushering in a new era in manufacturing by merging hardware and software and reimagining how products are designed, made and serviced.

AMUG Announces Scholarship Recipients

Additive Manufacturing

Nelson and Dr. Shanjani will attend and participate in the AMUG Conference to be held in Jacksonville, Fla., Lydia Nelson and Yaser Shanjani to join members at annual conference. CHATSWORTH, CALIF.,

GE to Build Advanced Manufacturing Facility in Pennsylvania

Additive Manufacturing

$32 Million Investment to Drive Best-In-Class Technology across GE Manufacturing. New center to develop and implement additive manufacturing technologies across GE industrial businesses.

GE-19 Tech Stories From 2015 You Should Know About

Additive Manufacturing

San Diego and Jacksonville have already started testing the system. By Dec 26, 2015 by Tomas Kellner | GE Reports. There were many tech stories that caught our eye in 2015. Here are 19 examples that either touch on GE technology and research or received funding from the company.

Is Reshoring Increasing or Declining?

Design 2 Part News

By Michele Nash-Hoff, Saving U.S. Manufacturing. In December, two conflicting reports were released, one by A.T. Kearney and one by the Boston Consulting Group. The A.

Concept Laser Outperforms the Market – Sales Rise by 75%

Additive Manufacturing

AMUG Conference, Jacksonville (USA) April 19-23, 2015. Sales figures for 2014 reach the three-digit range for the first time. Mechanical and plant engineering specialist Concept Laser sees above-average growth in 2014. “3D

ActivArmor teams with JOI to offer custom-fit 3D printed casts and splints


ActivArmor, a Colorado based company specializing in custom-fit 3D printed casts and splints is partnering with Jacksonville Orthopaedic Institute, official Sport Medicine Provider for teams like the Armada, the Blue Wave, JU, the Jaguars, and the Sharks, to bring its novel medical casts and splints to the Jacksonville region.

US Navy Fleet Readiness Center Southeast 3D prints its first aircraft component


Fleet Readiness Center Southeast, the largest tenant command aboard Naval Air Station Jacksonville in Florida, has 3D printed its first aircraft component, a forearm-length piece of air duct tubing made from a composite material called Ultum 1085.