SABIC-Investing Globally in Capabilities and Equipment to Support the Development of High Performance Materials for Additive Manufacturing Processes and Other Emerging Technologies

Additive Manufacturing

At this year’s RAPID Conference and Exposition held in Long Beach, California, Elizabeth Jordan , Ph.D. Dr. Elizabeth Jordan speaks at a panel discussion titled, “Enabling Growth of Thermoplastic Additive Manufacturing,” held at RAPID 2015 on May 18. About Innovative Plastics.

RepRap: Blog: On the Challenge of 3D Printing Sugar for.

RepRap Blog

Hi, Im Jordan Miller. Comments: Fantastic work Jordan, congrats on the first author nature paper! 'grats Jordan! Nice work Jordan!!!! Hi Jordan, fantastic work! RepRap: Blog.

3D Printing: The Next 25 Years

Additive Manufacturing

AMazing ® : In a recent Q&A with Dr. Jordan of SABIC, Dr. Jordan stated in order for additive manufacturing to reach its full potential, advances in design, process technology, as well as more and better materials are needed.

EOS Quality Leadership: Reproducible Part Quality in Plastics-Based Additive Manufacturing

Additive Manufacturing

In this way, we address a key concern of our growing industrial customer base, which uses our technology for the series production of plastic components with consistent component quality.” Claudia Jordan.

Go Beyond the Surface on the Concept to Consumer Tour

The Solidworks Blog

My recommendation to Todd was to use SOLIDWORKS surfacing tools to design a slick-looking plastic injection molded fender. Author information Jordan Tadic Territory Technical Manager - NA East at SOLIDWORKS Certified Elite Application Engineer.

Jordan 106

RAPID + TCT 2017: Additive Manufacturing Disrupts; Creates Innovation, Opportunity and Challenge

Additive Manufacturing

She will be joined by plastic and reconstructive surgeon, Sue Jordan, MD PhD, chief resident, Plastic and Reconstructive Surgery, Northwestern Memorial Hospital, to share some of their ongoing work and discuss its potential to improve and save lives.

formnext 2015 Becomes Innovation Driver for Product Development and Manufacturing

Additive Manufacturing

It enables plastic components to be mass-produced efficiently and cost-effectively and then customized for individual customers in small lot sizes in a further additive manufacturing step. Featured News Andy Middleton Claudia Jordan formnext Heinz Gaub Mesago Messe Frankfurt GmbH TCT

EOS 56

SOLIDWORKS 2015 What’s New – Costing #SW2015

CATI Tech Notes

In addition to sheet metal and machined components, we can now do costing on weldments, plastic injection molding, 3d printed and cast parts. Thanks, Jordan Nardick. Costing has been enhanced in SOLIDWORKS 2015 to support additional manufacturing types.

3d printing blood vessels on a RepRap

DIY 3D Printing

I got the first hint of this solution when I visited a Body Worlds exhibit, where you can see plastic casts of free-standing, whole organ vasculature," says Bioengineering postdoc Jordan Miller. Printing blood vessels out of sugar at Uni Pennsylvania lab.

RepRap 151

How Kespry’s Drones Are Mapping New Territories in Manufacturing

Shapeways Blog

We were looking for a supplier who had reasonable scale and the right combination of lead time and cost,” remembers Jordan Croom, Kespry’s lead mechanical engineer. As Jordan put it, “We’ve been ordering Shapeways parts basically since the beginning.

PLA on glass


A while ago Jordan Miller emailed me to say that PLA can be printed on hot glass. Jordan uses only 65°C and reports the objects are easy to remove, so I am not sure what I am doing wrong, different PLA perhaps.

Glass 52

The Future Of Manufacturing As Told In Four Objects

Design 2 Part News

One could also combine metals with plastic in one printing run. Oregon State undergrad Nathan Fuller, who recently completed a summer internship at Autodesk, started with a printed plastic prototype that was too weak on its own, so he laid carbon fiber over the surface.

EOS – VOLUM-e Installs the First EOS M 400 System in France

Additive Manufacturing

As a longstanding customer of EOS, VOLUM-e started to invest into AM already back in 1994 for polyamide technology and since then runs fourteen other industrial 3D printers for plastic and metal. Claudia Jordan.

SolidWorks World 2013 – Wednesday General Session

CAD Fanatic

Residual Stress From SolidWorks Plastics. Image credit for eDrawings on Android courtesy Ricky Jordan.

EOS Enters a Three-Year Technical Partnership with Williams

Additive Manufacturing

Claudia Jordan. Purchase of a new EOSINT P 760 will complement Williams’ existing manufacturing processes and support development projects .

EOS 65

Hanover Fair 2016: EOS Is Part of the Innovative “Emotional Engineering in Lightweight Design” Stand

Additive Manufacturing

The compact plastic AM system enables a reasonably priced and efficient introduction to the world of additive manufacturing. Claudia Jordan. Hall 6, Stand D-44: EOS joins group presenting high-end solutions for lightweight design based on Additive Manufacturing.

EOS 52

EOS Quality Leadership in Additive Manufacturing: Holistic Approach for Consistent Product Quality in Metal-Based Series Production

Additive Manufacturing

EOS additive manufacturing systems process metals or plastics. Claudia Jordan. Unique within the industry: quality assurance for system, material and process serves central customer requirements.

EOS 97

RepRap: Blog: Announcing AMRI: Advanced Manufacturing.

RepRap Blog

Anderson Ta - "Digital light projection (DLP) photolithography of plastics and hydrogels". Hi Jordan! RepRap: Blog. Blog for the RepRap project at - a project to create an open-source self-copying 3D printer. Thursday, August 08, 2013.

EOS Enters into a Strategic Cooperation with GF Machining Solutions

Additive Manufacturing

The additive manufacturing technology offers for such customers the possibility to generate metal inserts featuring cooling close to the surface, thus allowing for a shorter mold cooling sequence and therefore a much faster plastic injection cycle. Claudia Jordan.

EOS 52

More Than 15 Reasons to Attend SOLIDWORKS World 2016 #SWW2016

CATI Tech Notes

Jordan Nardick, Application Engineer, Computer Aided Technology. Jordan Nardick, Application Engineer, Computer Aided Technology. It will highlight the changes in 2016 that streamline the install of all products including SOLIDWORKS, EPDM, Composer, Plastics, and Electrical.

EOS, Technology and Quality Leader In Additive Manufacturing Continues on its Course of Success and Growth

Additive Manufacturing

This material is ideally suited for the manufacture of injection molding tools that are used to make medical products or products made of corrosive plastics. Claudia Jordan.

EOS 60

EOS-New Balance Uses EOS Industrial 3D-Printing Technology to Additively Manufacture

Additive Manufacturing

Claudia Jordan. No two runners are the same. This is especially true for athletes competing at the most elite levels. Their foot-strike patterns, degrees of pronation (the amount a runner’s foot rolls inward with each step), and braking and propulsion forces are all unique.

EOS 106

EOS at International Dental Show (IDS) 2015: Additive Manufacturing Now Accepted Manufacturing Process in the Dental Industry

Additive Manufacturing

In close cooperation with laboratories and manufacturing services providers, EOS has also been able to optimize the development of an economical production of dental models from high-quality plastic. Claudia Jordan.

EOS 56