Researchers Develop and Test 3D Printed Simulator for Neuraxial Anesthesia Training To Help Make Your Next Epidural or Surgery Safer

3DPrint.com

We’ve seen 3D printed medical simulators for all. 3D Printing 3D Software Medical 3D Printing 3d model 3d simulation anesthesia ct scanning desktop 3d printing FLOS software journal article medical simulation medical simulator Medical Training open source patient-specific printing research paper siliconeIt’s always easier for doctors, surgeons, and nurses to perform a procedure on a patient if they’ve practiced it a time or two.

NASA Scientist Develops First 3D Model of Melting Snowflake

3DPrint.com

3D Printing Science & Technology 3d model 3D modeling 3d printed snowflakes 3d simulation frozen journal article JPL nasa nasa 3d printing NASA Jet Propulsion Lab predictions research paper snowflake snowflakes weather researchFrom saving lives with weather stations and collecting weather data to studying hail and delivering accurate forecasts, 3D printing and 3D technologies have often been used for applications in. View the entire article via our website.

Study 59

Trending Sources

Can Platform-based Mining Simulation Address the Industry’s Megatrends?

3D Perspectives

A recent article in Mining Journal titled “Maturity insight builds strategic readiness” urges the industry not to become complacent as it will end up blindsiding them again when things inevitably turn south. Written by Mark Bese, Dassault Systèmes, Natural Resources Industry.

MIT – Researchers Design One of the Strongest, Lightest Materials Known

Additive Manufacturing

This illustration shows the simulation results of tensile and compression tests on 3-D graphene. To do that, they created a variety of 3-D models and then subjected them to various tests. The results from the experiments and simulations matched accurately. By David L.

Pittsburgh’s Swanson School of Engineering – On Board with New Metallic Alloy Compositions for Additive Manufacturing (AM)

Additive Manufacturing

Since we have a limited budget and a short time period to conduct our research, we need to develop good models, perform rigorous experiments and calibrate our model-predictions accordingly, using as few iterations as possible.

Finding New Opportunities in Low Grade Mines

3D Perspectives

A recent article in Mining Journal titled “Going lower” looks at how mining companies are addressing falling grades at low grade mines. In the Mining Journal article, the author states that “high grading has created a ticking time bomb.”.

Chile 75

Cardinal Glennon Children’s Hospital Opens a 3D Printing Center of Excellence – Part 1

Stratasys Blog for a 3D World

On site is a Stratasys J750 used to both prototype new kinds of medical devices and make patient-specific models, as well as enriching clinical education and training. How have 3D models help you overcome the challenges faced in these cases?

Lawrence Livermore Discovery a ‘Big Step Forward’ for Metal 3-D Printing Process

Additive Manufacturing

It is also something we now know we will have to capture with our models, so new physics is being added to the simulation codes.”. The (updated) models should help us optimize the process and give us the best chance at getting the best part.”.

Better Batteries Stabilize the Electric Grid

3D Perspectives

By contrast, battery storage can react in 100 milliseconds or less, says Andreas Ulbig, research associate at the Power Systems Lab of the Swiss Federal Institute of Technology Zurich (ETHZ) and co-founder of Adaptricity , a Zurich start-up that simulates active distribution grids.

Evolving Regulations of 3D Printed Medical Products in Hospitals

Stratasys Blog for a 3D World

Specifically, we reviewed the FDA article in the May issue of the journal 3D Printing in Medicine. Per the FDA, 3D printed surgical procedural models are not regulated medical devices – Scott Rader Click To Tweet.

Making Cities Bigger and Better

3D Perspectives

Modeling technology can simulate “what if” scenarios. Catherine Bolgar is a former managing editor of The Wall Street Journal Europe, now working as a freelance writer and editor with WSJ. By Catherine Bolgar.

Managing the Long Life of Industrial Equipment

3D Perspectives

You may have very little documentation, or everything necessary—even a 3D product model,” says Justin Rose , Chicago-based partner at the Boston Consulting Group. By Catherine Bolgar. Industrial equipment lasts a long time —the average age of current equipment in the U.S.

With Renewables, It’s Location, Location, Location

3D Perspectives

As renewable energy projects multiply , and with momentum expected to accelerate thanks to the Paris Agreement on climate change, advances in modeling and simulation are improving site selection in order to maximize the return on investment. It’s creating a boom in detailed modeling.”.

How drones are helping Japan overcome a labor shortage

3D Perspectives

Then, the data is used to run simulations of each stage of work. Japan’s i-Construction initiative is a good model for other countries, he says, by differentiating regulation of drones for commercial use—such as construction—from consumer use. By Catherine Bolgar.

Japan 83

ITAMCO Receives Grant from Department of Defense / Small Business Innovation Research Program

Additive Manufacturing

DoD / SBIR requested that the winner of the Phase I grant develop a computer-based model of a non-pneumatic tire in the 16.00R20 size for On-Highway and Off-Road Mobility, providing detailed information on design and materials. Plymouth, Indiana. June 12, 2018.

Making Cities Bigger and Better

3D Perspectives

Modeling technology can simulate “what if” scenarios. Catherine Bolgar is a former managing editor of The Wall Street Journal Europe, now working as a freelance writer and editor with WSJ. By Catherine Bolgar.

LLNL – 3D Printing With High-Performance Carbon Fiber

Additive Manufacturing

The research, published by the journal Scientific Reports (link is external) online on March 6, represents a “significant advance” in the development of micro-extrusion 3D printing techniques for carbon fiber, the authors reported. By Jeremy Thomas | thomas244@llnl.gov | LLNL.

Carnegie Mellon University – 3D Printing the Next Generation of Batteries

Additive Manufacturing

3D printing this microlattice structure, the researchers show in a paper published in the journal Additive Manufacturing , vastly improves the capacity and charge-discharge rates for lithium-ion batteries. By Emily Durham | Carnegie Mellon University | College of Engineering.

HI-AM Network – At the Forefront of Tangible Breakthroughs in AM Capabilities and Processes

Additive Manufacturing

These will facilitate the AM community and standards organizations (such as ASTM) to effectively use HI-AM generated materials as well as simulation, optimization, and real-time control tools. He has more than 95 journal papers and more than 100 conference papers.

ETH Zürich – Testing a Soft Artificial Heart

Additive Manufacturing

And this is the goal of the first entirely soft artificial heart: to mimic its natural model as closely as possible. The reasoning why nature should be used as a model is clear. By Franziska Schmid | ETH News.

CCO Opens the Idea Garage for Inspiring B2B and B2C Content Marketing Examples

Fabbaloo

Taking advantage of the format – quick, live content that comes with the capacity to fast forward or rewind from story to story – Bacardi USA turned its Instagram account into InstantDJ, a DJ simulator that allows users to take control of turntables, tapping left and right to control the music.

RESHORING: THE TREND FROM GLOBALIZATION TO…

Design 2 Part News

The emergence of localization and regionalization as a preferred business model is good news for the reshoring trend. Simulation. Harry is frequently quoted in the Wall Street Journal, Forbes, New Yorker and USA Today and seen on Fox Business, MarketWatch and other national TV and radio programs. “RESHORING: THE TREND FROM GLOBALIZATION TO LOCALIZATION” By Harry Moser, president at Reshoring Initiative, Industry Today.

Euro PM2015 International Powder Metallurgy Congress & Exhibition-Call for Papers

Additive Manufacturing

Following the on going success, the EPMA Keynote Paper Award sponsored by the Journal of Powder Metallurgy will continue for the Euro PM2015 Congress. Simulation and Modelling. Fundamentals and Modelling. Euro PM2015 Congress and Exhibition.