MakerMobile Lets Kentucky and Indiana Residents 3D Print and More

If you’re an avid maker or even just a budding genius with a head filled with great ideas but you don’t have access to the tools required to materialize those ideas, then there’s hope.... 3D Printers 3D Printing Indiana Kentucky Louisville makerfaire MakerMobile mobile 3d printing Southern Indiana techshop Type A Machines Series 1 3D Printer Velocity

CRP USA’s Windform Materials Let Them Re-imagine Additive Manufacturing

Additive manufacturing and proprietary Windform materials were used to build a number of parts of the Cubesat KySat-2 which was launched into orbit as part of a NASA mission out of Wallops Flight Facility.... 3D Design 3D Printing 3D Printing Materials 3d printing aerospace parts CubeSat KySat-2 Energica Superbike Livrea Yacht Italia Morehead University polyamide University of Kentucky windform Windform XT WindformXT polyamide 3d printing material

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Recognized For Powder Metallurgy Technology, Veloxint Acquires 68,000-Square-Foot Manufacturing Facility in Kentucky-Based Opportunity Zone

Design 2 Part News

Braidy Industries’ advanced materials subsidiary expects to create 150 local permanent jobs at full-scale production. Veloxint followed with an announcement in June that it had bought a 68,000-square-foot manufacturing facility in Eastern Kentucky that is expected to create 150 local jobs at full-scale production. Treasury-approved Opportunity Zone, designated by Kentucky Governor Matt Bevin.

SCC successful in 3D printing and welding stainless steel parts using desktop machines

3D Printing Industry

Kentucky, USA’s Somerset Community College (SCC) has been successful in 3D printing numerous 316L stainless steel metal parts using modified budget desktop 3D printers. Materials basf DSH Technologies Eric Wooldridge Karl Watson SCC virtual foundry

Plus-Mfg’s +1000k Multi Material Metal 3D Printer Shows Its Power

It’s been close to six months since we initially covered the Covington, Kentucky-based company Plus-Mfg and their unique take on metal 3D printing. Whereas other companies use lasers to sinter or melt metal powders... View the entire article via our website. 3D Printers 3D Printing +1000k +mfg +mfg llc cheap 3d printer copper 3d priter metal 3d printer plus mfg weld 3d print

$148M materials manufacturing institute run by OSU, EWI…

Design 2 Part News

“$148M materials manufacturing institute run by OSU, EWI, University of Michigan opens Thursday” By Tom Knox, Biz Journal. The American Lightweight Materials Manufacturing Innovation Institute, announced last February by President Barack Obama , debuts Thursday in Corktown, a Detroit neighborhood near its downtown. NYSE:LMT) and Honda North American Services and colleges like the University of Notre Dame and the University of Kentucky.

3D Printed Spoon Gives Visually Impaired Child New Handle on Independence

Stratasys Blog for a 3D World

When 4 year old Anthony of Shelbyville, Kentucky lost his vision after an operation to remove a brain tumor, Wayne Whitworth, a family friend and former United States marine, offered a solution to help the little boy regain his independence.

Stratasys and SME Help Students Prepare for STEM Careers at Skills USA

Stratasys Blog for a 3D World

The 52 nd annual SkillsUSA 2016 National Leadership and Skills Conference was held at the Kentucky Exposition Center in Louisville, Kentucky, where over 6,000 Career and Technical Education (CTE) students competed in hands-on trade, technical and leadership contests.

UT-White House Picks UT to Lead National Composites Manufacturing Institute

Additive Manufacturing

Established as a nonprofit 501(c)(3) in Tennessee by the UT Research Foundation, IACMI has received a $15 million commitment from the Tennessee Department of Economic and Community Development as part of an effort to facilitate breakthroughs in manufacturing and materials.

Research Heralds 3D-Printed Organs and even Hearts

3D Perspectives

A personalized 3D printed scaffolding is made of synthetic material, on which living cells are placed that will grow around the structure. Williams, director of the bioficial organs program at the University of Louisville, Kentucky. Written by Catherine Bolgar.

AMUG Awards Two Scholarships

Additive Manufacturing

Kate Schneidau is a mechanical engineering graduate student at the University of Louisville (Louisville, Kentucky) with an extreme passion for AM. Kate Schneidau and Chris Kaminsky to be Recognized at 2020 AMUG Conference. MILWAUKEE, WIS.,

BeAM Machine’s Magic 2.0 Has Arrived At The BeAM North American Solutions Center In Cincinnati, Ohio

Additive Manufacturing

Located in Cincinnati, Ohio, the BeAM Machines North American Solutions Center is about 30 minutes north of the Greater Cincinnati-Northern Kentucky International Airport, an optimal location to serve the many leading edge companies who will utilize our DED technology and solutions.

Ohio 77

BeAM Machines, Inc. to Host Open House

Additive Manufacturing

The facility, operating as the BeAM Machines Solutions Center for North America, will handle sales, service, process/material development, applications, R&D and training. BeAM Machines, Inc. hosts Open House on Thursday, August 31 st a t new 20,000 square foot facility in Cincinnati.

Enhancing The World’s Most Bad-Ass Mowers with 3D Printing


A city in Eastern Kentucky had two wheel-driven slope remote control mowers they used on their overpasses. Just upload your 3D file , choose from 100+ materials , and see how much it will cost to print your models on industrial machines with i.materialise.

SME Announces Winners of the 2016 SkillsUSA Additive Manufacturing Competition

Additive Manufacturing

July 5, 2016 /PRNewswire-USNewswire/ – SME , working with Stratasys , sponsored a student additive manufacturing competition at the 52nd annual SkillsUSA National Leadership and Skills Conference in Louisville, Kentucky, June 21-23. By SME. DEARBORN, Mich.,

New Home of Digital Manufacturing and Design Innovation Institute

RPM Tools

Specifically, the combination of advanced materials, high performance computing resources, modeling and simulation tools, and additive manufacturing practices is allowing large and small enterprises alike to design and build otherwise impossibly complex shapes and systems while significantly reducing manufacturing costs and cycle times, Johnson added. The DMDI Institute will address the life cycle of digital data interchanged through design, engineering and manufacturing.

Upcoming CATI Training Classes for August 2016 – Featuring SOLIDWORKS Drawings

CATI Tech Notes

A lot of material is covered in a short time, but our instructors are there to make sure that no one is left behind. In order to obtain the full potential of the powerful tools provided by Computer Aided Technology (CATI), over 70 training classes are offered in August 2016.

Technologies Point to New Possibilities for Automotive…

Design 2 Part News

Meanwhile, Toyota Engineering and Manufacturing North America, headquartered in Erlanger, Kentucky, received the Bronze Award in the Special Recognition: Green Tech category for the Wireless Power Transfer Based Electric and Plug-in Vehicle Charging System.

Brogan Volunteers 2017

Design 2 Part News

15, Colleen, Ashlen, Caleb, Taylor and Tami volunteered at Arts & Scraps, a Detroit nonprofit organization that annually recycles material to help children think, create and learn. Here, they sorted and prepared craft materials for Detroit's youth.

SME, Stratasys Announce Winners of FANUC-Inspired SkillsUSA Additive Manufacturing Competition

Additive Manufacturing

SME and global additive manufacturing leader Stratasys have announced the winners of their cosponsored 2019 Additive Manufacturing Competition , held during the 55th annual SkillsUSA National Leadership and Skills Conference in Louisville, Kentucky, June 24-28.

Omaha 52

UL, UofL Create Center to Train Workers for Additive Manufacturing

Additive Manufacturing

The training will allow professionals to understand how to produce metal parts and emerging materials through additive manufacturing, establish safety systems, identify hazards from materials and machines and manufacture parts with safety built into designs. NORTHBROOK, Ill.

Virginia Tech Students to Launch Experimental 3-D Printer on NASA Rocket Ship from Wallops Island

Additive Manufacturing

Co-leading the team is John Mulvaney of Versailles, Kentucky, and a senior in the Department of Aerospace and Ocean Engineering. After that, the group hopes to improve the printer and send it on a second flight, potentially with the ability to print multiple materials. BLACKSBURG, Va.,

ASTM-Dr. Brent Stucker of 3DSIM Joins ASTM International Board of Directors

Additive Manufacturing

In addition to 3DSIM, Stucker is also the Clark Chair of computer-aided engineering and a professor of industrial engineering at the University of Louisville, Kentucky. Working across borders, disciplines, and industries we harness the expertise of over 30,000 members to create consensus and improve performance in manufacturing and materials, products and processes, systems and services. CONSHOHOCKEN, Pa., January 8, 2015—Brent Stucker , Ph.D.,

All About PVC: Applications, Recycling, and Safety Information

3D Printing Hub

Polyvinyl chloride ( PVC ) is just one of those rare materials that are as popular as they are controversial. To fully understand what makes PVC so controversial, we need to know how this material is produced. In regions where there is a substantial supply, coal has also been used as a starting material for PVC production. One of the most common additives used with PVC is phthalic acid, a plasticizer hat greatly improves the material’s flexibility and workability.

How Does America “Reshore” Skills That Have Disappeared?

Design 2 Part News

By the time the second and third rounds of deliveries are made, the quality of the materials has declined. By the time the second and third rounds of deliveries are made, the quality of the materials has declined. By Todd Oppenheimer, .

Where Manufacturing Is Thriving In The U.S.

Design 2 Part News

Nine of this year’s top 10 regions for manufacturing job growth are in red states, led by top-ranked Louisville-Jefferson County, which straddles the border between Kentucky and Indiana. By Joel Kotkin and Mike Shires, Forbes.

Apple announces plans to repatriate billions in overseas cash…

Design 2 Part News

It is already backing projects with leading manufacturers in Kentucky and rural Texas. Apple works with over 9,000 American suppliers — large and small businesses in all 50 states — and each of Apple’s core products relies on parts or materials made in the US or provided by US-based suppliers.