INDUSTRY INSIGHTS YOUR PEERS ARE READING
HP has chosen to open its Asia-Pacific Japan (APJ) HQ within Singapore’s thriving National Additive Manufacturing Innovation Cluster (NAMIC). The new S$100 million (equivalent of $74million USD) hub will also be home to the company’s first ever Smart Manufacturing Applications and Research Centre (Smarc), and responsible for boosting HP’s manufacturing processes. MORE
The last Sliced 3D printing news digest of the week, today we feature, a story that brings new meaning for 3D printing a cradle to grave file; new business partnerships from Nano Dimension, EOS, and Authentise; a $9 million research fund; and other additive manufacturing applications, research and hardware releases. Latest business partnerships Process automation […]. MORE
Data can travel across the globe in a manner of seconds/minutes, allowing parts, object, etc is then manufactured on site. This can be done easily without expensive die/molding cost to fine tune functional prototypes before production is scaled up to the these more industrialized processes. MORE
Digimat® for Additive Manufacturing will enable designers and engineers to accurately predict warpage and residual stresses of 3D-printed KetaSpire® PEEK parts as a function of additive manufacturing processes, such as fused filament fabrication (FFF). Alpharetta, Ga., MORE
Process & Application Development Center launched during visit of the Singapore President to Eindhoven. capabilities, and accelerate the adoption of additive manufacturing technologies across key sectors such as aerospace, marine and offshore, medical technology, and semiconductors. MORE
The entire process required only ten days to complete. Additive manufacturing has the potential to dramatically change the way boats are built” says Thermwood’s founder, Chairman and CEO, Ken Susnjara. All White River Marine boats are proudly manufactured in the U.S. MORE
3D printing enables manufacturers to test tool designs before committing to metal—saving both time and money. Tyler Reid, Manufacturing Application Manager, GoEngineer. But there’s a lot of tooling and manufacturing applications that are great for 3D printing, which allows for the creation of fast and cheap injection mold inserts or tooling—all made out of true-to-spec materials. 3D Printers Additive Manufacturing Industrial Leslie's blog Materials MORE
Clearly, MBD reads much more intuitively and integrates PMI more tightly into 3D as the design authority, which avoids ambiguity, synchronizes design changes more directly, and reuses intelligent 3D data in downstream manufacturing applications more cohesively. MORE
Stratasys Additive Manufacturing Ecosystem. The 3D printing industry has changed a lot over the last few years with more technologies, materials, applications and part delivery options. Explore Our Innovative Application Kiosks. Augmenting Traditional Manufacturing. MORE
On display was a full range of tooling solutions for high-end manufacturing applications that demonstrated how 3D printing can replace traditional hard tooling technologies – eliminating labor, waste and long lead times. Processing the CAD file for optimal build results. MORE
whose proprietary STEP technology will radically improve manufacturing while creating new disruptive business models, today announced the shipment of their first STEP system. The Alpha program tees up the organization for the next phase in the process which is Beta.”. MORE
One of the major barriers for metal Additive Manufacturing technology is the shortage of AM application engineering experts at a global level. comments Güngör Kara, Director Global Application & Consulting at EOS. MORE
This guest blog is by Tyler Reid, Manufacturing Application Manager, GoEngineer. Iterative design demands flexibility throughout the process, and 3D printing (3DP) delivers that opportunity. MORE
Stratasys Additive Manufacturing Booth: “Transforming Manufacturing Today” at EuroMold 2014. Additive manufacturing is changing the way we plan, design and produce products. Plastic Processing Tools/Injection Molds. Direct Digital Manufacturing (DDM) Tools Without Toolin MORE
RIZE’s Unique Material Properties Provide Merck with Maximum Flexibility for a Range of Functional Additive Manufacturing Applications. According to Merck’s Senior Lead Engineer of Additive Manufacturing, Tinh Nguyen-Demary, “3D printing enables innovation. MORE
Nasdaq: SSYS) today announced that SAP is establishing along with Stratasys, a global network of 3D printing co-innovation labs to educate and enable customers, employees and partners on the adoption of additive manufacturing as an integral part of the manufacturing production line. MORE
3Dprinting /additive manufacturing (3DP/AM) has had a bit of an identity problem for the past few years. Is it a machine that will replace CNCs and other legacy manufacturing systems? Is it the third leg of manufacturing—subtractive, injection molding, and now additive? MORE
Additive manufacturing (AM) machines and 3D printers have a reputation for being slower than users desire when it comes to building a part. Speed depends on part design, material, and the selected additive build process. MORE
With the acquisition, Oerlikon gains for its Surface Solutions Segment unique and proprietary process technology and expertise in rapidly designing and developing materials using computational software, which enables a fast identification of disruptive material solutions. MORE
The company’s 160,000+ employees serve customers in over 100 countries, helping them to manage their energy and processes in ways that are safe, reliable, efficient and sustainable. Tooling and Manufacturing MORE
Seeing incredible additive manufacturing technologies on the RAPID show floor is great – but understanding how they work and developing a plan for how they can advance your business is even better. Medical Manufacturing Innovations I & II. Medical Manufacturing Innovations V. MORE
SABIC , a global supplier of engineering thermoplastics, recently delivered the materials and processing expertise needed to create the first-ever fully functional 3D-printed vehicle , Strati , at the International Manufacturing Technology Show (IMTS 2014). MORE
The United Launch Alliance (ULA) changed the game of aerospace exploration earlier this year when they announced a shift from traditional metallic applications to additive manufacturing using Stratasys Fused Deposition Modeling (FDM) 3D printing technology. MORE
The company, an engineering solutions provider and Stratasys partner for nearly 18 years, supplies both Polyjet and Fused Deposition Modeling (FDM) professional 3D printers to design and manufacturing industries. 3D Printing Rapid Prototyping and Manufacturing Stratasys MORE
If you’re looking for new ways to expand your additive manufacturing applications, this video is a must see. This is a great technique for 3D printed parts that will undergo the process of assembly and disassembly. MORE
SLM Solutions new offices, technology partnership center and manufacturing facility in Luebeck, Germany. Featured News Additive Manufacturing AM Daniela Wedemeyer Germany Lübeck selective laser melting SLM Solutions Group AGLübeck, August 17, 2018. MORE
The new system shatters the boundaries of manufacturing with regards to productivity, industrialization and part quality. And he adds: “The Additive Manufacturing technology provides us with the speed and efficiencies needed to progress in the energy industry’s fast-moving digital environment. MORE
Oerlikon AM and Lufthansa Technik will jointly establish replicable additive manufacturing (AM) processes and standards for maintenance, repair and overhaul (MRO) applications. The same process parameters and powder specifications will be used to understand process repeatability. MORE
Manufacturing on the Cloud Makes Big Data Easy to Manage. Manufacturing applications on the 3DEXPERIENCE® platform work much in the same way. Of course the cloud offers a great repository to keep all of your manufacturing data and applications. MORE
Today we introduce the second study, “The enabling role of 3DP in redistributed manufacturing: A total cost model”, which is being led by Dr Martin Baumers at the University of Nottingham. The diffusion of 3D Printing (3DP) is creating an environment in which manufacturing innovation is flourishing. While the technical feasibility of redistributed manufacturing through 3DP has been demonstrated across many industry sectors, its economic foundations are not fully understood. MORE
Worldwide interest and adoption of additive manufacturing (AM) in industry continues at an astounding pace with the prediction that sales of products and services will double in the coming years. Additive Manufacturing Applications. Additive Manufacturing Materials. MORE
Researchers at the Beijing Key Laboratory of CryoBiomedical Engineering have developed a metal 3D printing process that uses low melting point metal alloy Inks. By Scott J Grunewald. MORE
Some executives believe that the current state of additive manufacturing equipment is too focused on prototyping instead of production. But more companies continue to enter the space of additive manufacturing, especially for metal materials. MORE
This marked the technology’s ascension from a Cambridge University breakthrough, through more than a decade of development, to offering industrial scale production of demand driven, high value powder alloys for international aerospace, automotive, additive and advanced manufacturing applications. MORE
The main remit of this agreement is for these two German companies to collaborate on the development of optimized metal powdered materials for additive manufacturing applications with the ORLAS CREATOR platform. MORE
PyroGenesis’ Plasma Atomization Process (PAP) is an enabling technology for 3D Printing as well as other additive manufacturing and powder metallurgy applications. Featured News PAP Plasma Atomization Process PYRNF PyroGenesis Canada Inc MORE
GKN Aerospace announces new £32m Global Technology Centre in Bristol on additive manufacturing (AM), advanced composites, assembly and industry 4.0 processes. The centre will focus on additive manufacturing (AM), advanced composites, assembly and industry 4.0 MORE
whose proprietary Selective Thermoplastic Electrophotographic Process (STEP) technology will radically improve manufacturing while creating disruptive new business models, today announced the completion of an equity investment of $19M led by the LEGO Brand Group with participation from Stanley Black and Decker Investments and a third undisclosed investor. The LEGO Group has been using Additive Manufacturing technology for more than 20 years. MORE
Tyler Reid, Manufacturing Application Manager, GoEngineer. Engineers are normally introduced to the concept of design for manufacture (DFM) while in school. But the reality is that the majority of engineers don’t actually learn how to design for manufacture until they are on the job. Additive manufacturing, however, turns this scenario completely around by encouraging part complexity: pockets and holes suddenly become time-savers! MORE
If you’re designing large parts, medium parts or lots of small parts for high value applications like automobiles and aircraft, you want an additive manufacturing system built for maximum versatility. Galit: What makes the Objet1000 Plus such big news in additive manufacturing? MORE
Global information technology company Wipro is developing manufacturing applications that are built upon a blockchain and targeted at 3D printer systems. 3D Software aerospace Automation World Blockchain blockchain 3D printing blockchain additive manufacturing digital thread Sanjeev Ramakrishnan supply chain Wipro Wipro blockchain Wipro3D MORE
The system is developed specifically for process & application development and prototyping. Its compact footprint and competitive price point help first time users to gain experience with metal additive manufacturing before scaling for series production. MORE
The developers of additive 3D printing systems continue to focus on moving into manufacturing. 3D Systems has long had products that suit manufacturing applications, but its previous branded identity did not always emphasize that aspect of the business. MORE
Internally-developed platform brings values of additive manufacturing to short-run production while overcoming limitations of cost and throughput. The global market for metal additive manufacturing is projected to grow to $12 billion by 2028, according to industry estimates. MORE
Stratasys Blog for a 3D World
AUGUST 26, 2014
If you’re looking for new ways to expand your additive manufacturing applications, this video is a must see. This is a great technique for 3D printed parts that will undergo the process of assembly and disassembly.
Additive Manufacturing
FEBRUARY 28, 2018
Internally-developed platform brings values of additive manufacturing to short-run production while overcoming limitations of cost and throughput. The global market for metal additive manufacturing is projected to grow to $12 billion by 2028, according to industry estimates.
3D Printing Industry
JUNE 28, 2017
Global information technology company Wipro is developing manufacturing applications that are built upon a blockchain and targeted at 3D printer systems. 3D Software aerospace Automation World Blockchain blockchain 3D printing blockchain additive manufacturing digital thread Sanjeev Ramakrishnan supply chain Wipro Wipro blockchain Wipro3D
3D Printing Industry
DECEMBER 14, 2017
HP has chosen to open its Asia-Pacific Japan (APJ) HQ within Singapore’s thriving National Additive Manufacturing Innovation Cluster (NAMIC). The new S$100 million (equivalent of $74million USD) hub will also be home to the company’s first ever Smart Manufacturing Applications and Research Centre (Smarc), and responsible for boosting HP’s manufacturing processes.
3D Printing Industry
OCTOBER 3, 2014
Researchers at the Beijing Key Laboratory of CryoBiomedical Engineering have developed a metal 3D printing process that uses low melting point metal alloy Inks. By Scott J Grunewald.
Additive Manufacturing
MAY 3, 2017
With the acquisition, Oerlikon gains for its Surface Solutions Segment unique and proprietary process technology and expertise in rapidly designing and developing materials using computational software, which enables a fast identification of disruptive material solutions.
Additive Manufacturing
MAY 17, 2018
Worldwide interest and adoption of additive manufacturing (AM) in industry continues at an astounding pace with the prediction that sales of products and services will double in the coming years. Additive Manufacturing Applications. Additive Manufacturing Materials.
3D Perspectives
JULY 29, 2014
Manufacturing on the Cloud Makes Big Data Easy to Manage. Manufacturing applications on the 3DEXPERIENCE® platform work much in the same way. Of course the cloud offers a great repository to keep all of your manufacturing data and applications.
Additive Manufacturing
MARCH 21, 2017
The system is developed specifically for process & application development and prototyping. Its compact footprint and competitive price point help first time users to gain experience with metal additive manufacturing before scaling for series production.
Additive Manufacturing
OCTOBER 15, 2014
SABIC , a global supplier of engineering thermoplastics, recently delivered the materials and processing expertise needed to create the first-ever fully functional 3D-printed vehicle , Strati , at the International Manufacturing Technology Show (IMTS 2014).
Additive Manufacturing
APRIL 7, 2017
One of the major barriers for metal Additive Manufacturing technology is the shortage of AM application engineering experts at a global level. comments Güngör Kara, Director Global Application & Consulting at EOS.
Additive Manufacturing
NOVEMBER 17, 2016
Nasdaq: SSYS) today announced that SAP is establishing along with Stratasys, a global network of 3D printing co-innovation labs to educate and enable customers, employees and partners on the adoption of additive manufacturing as an integral part of the manufacturing production line.
Additive Manufacturing
NOVEMBER 25, 2018
Process & Application Development Center launched during visit of the Singapore President to Eindhoven. capabilities, and accelerate the adoption of additive manufacturing technologies across key sectors such as aerospace, marine and offshore, medical technology, and semiconductors.
Open 3DP
OCTOBER 24, 2014
Data can travel across the globe in a manner of seconds/minutes, allowing parts, object, etc is then manufactured on site. This can be done easily without expensive die/molding cost to fine tune functional prototypes before production is scaled up to the these more industrialized processes.
Additive Manufacturing
JUNE 26, 2018
RIZE’s Unique Material Properties Provide Merck with Maximum Flexibility for a Range of Functional Additive Manufacturing Applications. According to Merck’s Senior Lead Engineer of Additive Manufacturing, Tinh Nguyen-Demary, “3D printing enables innovation.
Additive Manufacturing
AUGUST 31, 2016
The new system shatters the boundaries of manufacturing with regards to productivity, industrialization and part quality. And he adds: “The Additive Manufacturing technology provides us with the speed and efficiencies needed to progress in the energy industry’s fast-moving digital environment.
Additive Manufacturing
SEPTEMBER 17, 2018
whose proprietary Selective Thermoplastic Electrophotographic Process (STEP) technology will radically improve manufacturing while creating disruptive new business models, today announced the completion of an equity investment of $19M led by the LEGO Brand Group with participation from Stanley Black and Decker Investments and a third undisclosed investor. The LEGO Group has been using Additive Manufacturing technology for more than 20 years.
Additive Manufacturing
OCTOBER 26, 2015
PyroGenesis’ Plasma Atomization Process (PAP) is an enabling technology for 3D Printing as well as other additive manufacturing and powder metallurgy applications. Featured News PAP Plasma Atomization Process PYRNF PyroGenesis Canada Inc
3D Printing Industry
OCTOBER 26, 2018
The last Sliced 3D printing news digest of the week, today we feature, a story that brings new meaning for 3D printing a cradle to grave file; new business partnerships from Nano Dimension, EOS, and Authentise; a $9 million research fund; and other additive manufacturing applications, research and hardware releases. Latest business partnerships Process automation […].
Stratasys Blog for a 3D World
DECEMBER 15, 2014
Stratasys Additive Manufacturing Booth: “Transforming Manufacturing Today” at EuroMold 2014. Additive manufacturing is changing the way we plan, design and produce products. Plastic Processing Tools/Injection Molds. Direct Digital Manufacturing (DDM) Tools Without Toolin
Stratasys Blog for a 3D World
AUGUST 18, 2015
The United Launch Alliance (ULA) changed the game of aerospace exploration earlier this year when they announced a shift from traditional metallic applications to additive manufacturing using Stratasys Fused Deposition Modeling (FDM) 3D printing technology.
Leslie's Blog
OCTOBER 28, 2014
This guest blog is by Tyler Reid, Manufacturing Application Manager, GoEngineer. Iterative design demands flexibility throughout the process, and 3D printing (3DP) delivers that opportunity.
Leslie's Blog
MAY 28, 2015
Some executives believe that the current state of additive manufacturing equipment is too focused on prototyping instead of production. But more companies continue to enter the space of additive manufacturing, especially for metal materials.
Leslie's Blog
FEBRUARY 5, 2015
Tyler Reid, Manufacturing Application Manager, GoEngineer. Engineers are normally introduced to the concept of design for manufacture (DFM) while in school. But the reality is that the majority of engineers don’t actually learn how to design for manufacture until they are on the job. Additive manufacturing, however, turns this scenario completely around by encouraging part complexity: pockets and holes suddenly become time-savers!
Additive Manufacturing
JANUARY 14, 2019
The entire process required only ten days to complete. Additive manufacturing has the potential to dramatically change the way boats are built” says Thermwood’s founder, Chairman and CEO, Ken Susnjara. All White River Marine boats are proudly manufactured in the U.S.
Additive Manufacturing
APRIL 13, 2015
Seeing incredible additive manufacturing technologies on the RAPID show floor is great – but understanding how they work and developing a plan for how they can advance your business is even better. Medical Manufacturing Innovations I & II. Medical Manufacturing Innovations V.
Leslie's Blog
SEPTEMBER 13, 2016
3Dprinting /additive manufacturing (3DP/AM) has had a bit of an identity problem for the past few years. Is it a machine that will replace CNCs and other legacy manufacturing systems? Is it the third leg of manufacturing—subtractive, injection molding, and now additive?
Leslie's Blog
JUNE 8, 2015
3D printing enables manufacturers to test tool designs before committing to metal—saving both time and money. Tyler Reid, Manufacturing Application Manager, GoEngineer. But there’s a lot of tooling and manufacturing applications that are great for 3D printing, which allows for the creation of fast and cheap injection mold inserts or tooling—all made out of true-to-spec materials. 3D Printers Additive Manufacturing Industrial Leslie's blog Materials
Additive Manufacturing
DECEMBER 6, 2018
GKN Aerospace announces new £32m Global Technology Centre in Bristol on additive manufacturing (AM), advanced composites, assembly and industry 4.0 processes. The centre will focus on additive manufacturing (AM), advanced composites, assembly and industry 4.0
Stratasys Blog for a 3D World
JUNE 8, 2016
On display was a full range of tooling solutions for high-end manufacturing applications that demonstrated how 3D printing can replace traditional hard tooling technologies – eliminating labor, waste and long lead times. Processing the CAD file for optimal build results.
Stratasys Blog for a 3D World
APRIL 13, 2015
If you’re designing large parts, medium parts or lots of small parts for high value applications like automobiles and aircraft, you want an additive manufacturing system built for maximum versatility. Galit: What makes the Objet1000 Plus such big news in additive manufacturing?
Additive Manufacturing
DECEMBER 3, 2018
This marked the technology’s ascension from a Cambridge University breakthrough, through more than a decade of development, to offering industrial scale production of demand driven, high value powder alloys for international aerospace, automotive, additive and advanced manufacturing applications.
Additive Manufacturing
AUGUST 20, 2018
SLM Solutions new offices, technology partnership center and manufacturing facility in Luebeck, Germany. Featured News Additive Manufacturing AM Daniela Wedemeyer Germany Lübeck selective laser melting SLM Solutions Group AGLübeck, August 17, 2018.
Additive Manufacturing
APRIL 25, 2018
Digimat® for Additive Manufacturing will enable designers and engineers to accurately predict warpage and residual stresses of 3D-printed KetaSpire® PEEK parts as a function of additive manufacturing processes, such as fused filament fabrication (FFF). Alpharetta, Ga.,
Leslie's Blog
NOVEMBER 13, 2017
The developers of additive 3D printing systems continue to focus on moving into manufacturing. 3D Systems has long had products that suit manufacturing applications, but its previous branded identity did not always emphasize that aspect of the business.
The Solidworks Blog
OCTOBER 13, 2015
Clearly, MBD reads much more intuitively and integrates PMI more tightly into 3D as the design authority, which avoids ambiguity, synchronizes design changes more directly, and reuses intelligent 3D data in downstream manufacturing applications more cohesively.
Leslie's Blog
APRIL 13, 2015
Additive manufacturing (AM) machines and 3D printers have a reputation for being slower than users desire when it comes to building a part. Speed depends on part design, material, and the selected additive build process.
Stratasys Blog for a 3D World
NOVEMBER 25, 2014
Stratasys Additive Manufacturing Ecosystem. The 3D printing industry has changed a lot over the last few years with more technologies, materials, applications and part delivery options. Explore Our Innovative Application Kiosks. Augmenting Traditional Manufacturing.
Additive Manufacturing
MAY 5, 2017
The main remit of this agreement is for these two German companies to collaborate on the development of optimized metal powdered materials for additive manufacturing applications with the ORLAS CREATOR platform.
Fisher/Unitech
AUGUST 31, 2015
The company, an engineering solutions provider and Stratasys partner for nearly 18 years, supplies both Polyjet and Fused Deposition Modeling (FDM) professional 3D printers to design and manufacturing industries. 3D Printing Rapid Prototyping and Manufacturing Stratasys
Capturing the Value
APRIL 27, 2015
Today we introduce the second study, “The enabling role of 3DP in redistributed manufacturing: A total cost model”, which is being led by Dr Martin Baumers at the University of Nottingham. The diffusion of 3D Printing (3DP) is creating an environment in which manufacturing innovation is flourishing. While the technical feasibility of redistributed manufacturing through 3DP has been demonstrated across many industry sectors, its economic foundations are not fully understood.
Stratasys Blog for a 3D World
SEPTEMBER 28, 2016
The company’s 160,000+ employees serve customers in over 100 countries, helping them to manage their energy and processes in ways that are safe, reliable, efficient and sustainable. Tooling and Manufacturing
Additive Manufacturing
SEPTEMBER 11, 2018
whose proprietary STEP technology will radically improve manufacturing while creating new disruptive business models, today announced the shipment of their first STEP system. The Alpha program tees up the organization for the next phase in the process which is Beta.”.
85 
Let's personalize your content