New Jersey Man Receives 3D Printed PEEK Skull Implant

3DPrint.com

3D Printing Medical 3D Printing 3d print peek 3d printed cranial implants 3D printed implant 3d printed medical devices 3d printed skull implant DePuy Synthes PEEK PEEK material rutgers Rutgers Robert Wood Johnson Medical School skull implant skull reconstruction3D printing is in the news so often today that it is not uncommon now for it to come up in conversation with just about anyone. And while the naysaying has abated quite a bit due to the sheer amount.

Rutgers Engineers Develop 4D Printing Method for Shape-Shifting Hydrogels

3DPrint.com

3D Printing 3D Printing Materials Science & Technology 3D printed hydrogels 3D printed shape shifting structures 4D printed smart materials 4d printing 4D printing technology hydrogel journal article micro stereolithography microstereolithography New Jersey Institute of Technology research paper rutgers Rutgers University-New Brunswick Rutgers' Department of Mechanical and Aerospace Engineering scientific reports smart materials

Trending Sources

MIT's 3D Printable Magnetic Ink Creates Rapidly Shape-Sifting Objects

3DPrint.com

3D Printing 3D Printing Materials Medical 3D Printing Science & Technology 3d magnetic printing 3D printable inks 3D printed shape shifting structures 3d printed soft robotics 3D printing platform biomedical 3D printing journal article magnetic Massachusetts Institute of Technology mit Nature Journal New Jersey Institute of Technology research paper soft 3D printing materials soft robotics

Henkel and TerraCycle accelerate recycling processes for additive manufacturing

3D Printing Industry

Based in New Jersey, TerraCycle provides environmental services which turn hard-to-recycle materials into reusable packaging. The Adhesive Recycling Program enables Henkel customers the ability to recycle LOCTITE material packaging used for resins, […].

U.S. Army awards Rowan University $14.5M to develop cold spray additive manufacturing

3D Printing Industry

Rowan University, New Jersey has received $14.5 In a project titled “Advancing Structural Materials for Army Modernization Priorities via Direct-Write Approaches” Rowan researchers will apply technological improvements to enhance the safety of soldiers.

U.S. Army acquires Rize One 3D printer for spare parts on-demand

3D Printing Industry

Army in New Jersey has acquired a Rize One 3D printer for the on-demand manufacturing of spare parts and tools. 3DP Applications 850 R LENS Additive Manufacturing Facility Advanced Composites Lab Advanced Materials Technology Branch ARDEC Armament Research Development and Engineering Center Dimension Elite James Zunino Objet500 Connex3 PolyJet optomec Rapid Prototyping Facility Rize Rize One SLA 3500 U.S

3D Printing Helps Robotic Marble Sculptors Push the Limits of Digital Manufacturing

3D Printing Industry

James Brehm, a digital artist and sculptor from New Jersey, contacted 3DPI to tell us about the fascinating work he and a team of artists are carrying out within a program called the Digital Stone Project, now in its third year and supported directly by Autodesk. By Davide Sher.

College Student Straightens Own Teeth With 3D Printed Retainers That He Made

3D Printer

A college student from New Jersey took the phrase, do it yourself, to a whole new level when he 3D printed his own retainer to fix his crooked teeth.

This Company Turns Recycled Potato Chip Bags Into 3D Printing Filament

3D Printing Review

The company is called 3D Brooklyn, and it is a small studio that uses materials like potato chip bags, which can’t really be recycled in the traditional way. 3D Brooklyn gets its chip bags from TerraCycle, a recycling company based in New Jersey.

BuildTak Review – The Ideal 3D Printing Surface?

3D Printing for Beginners

For ABS filament, a material notoriously difficult to print without a heated print bed, the recommended solution is to use ABS slurry (a mixture of ground-up ABS filament dissolved in acetone) to provide sufficient adhesion. Clearly, you don’t want to waste this material.

Rize Additive Manufacturing Helps Soldiers Get Parts Faster; Builds Trust into Critical Parts

Additive Manufacturing

Headquartered at the Picatinny Arsenal in New Jersey, The United States Army Armament Research , Development and Engineering Center ( ARDEC ), is the primary research and development group for the US Army’s armament and munitions systems. James Zunino, Materials Engineer, ARDEC.

Rutgers Researchers Create a 3D-Printed Smart Gel That Walks Underwater, Moves Objects

Additive Manufacturing

Bates | todd.bates@rutgers.edu | Rutgers University–New Brunswick. New technology has biomedical, soft robot and other applications. New Brunswick, N.J. , Soft materials like the smart gel are flexible, often cheaper to manufacture than hard materials and can be miniaturized.

Integrating 3D Printing and Technology at Harrisburg South Middle School

Afinia

Lape strongly advocates using new technology to enhance and engage students in learning. Now, I get to team up with teachers to introduce them to something new. With the new technology in our classrooms, we can do that. However, the 3D printer is still new and exciting.

DIY 3D Printing: US military will 3d print warheads and missiles for.

DIY 3D Printing

It is Rytheons Small Tactical Munition, a new weapon specifically designed to be employed from unmanned aircraft systems. For those small drone bombs plastic materials could be used or even locally sourced materials. is a new 3d model search engine with a t.

Autonomous Mobile Robots Support A Lean Approach…

Design 2 Part News

Even in highly automated facilities, material handling is often still a manual, inefficient process, but automating material transportation to reduce production bottlenecks and deploy valuable human workers more effectively has been a challenge. But new sensor and software technologies make autonomous mobile robots (AMRs) ideal for unpredictable or changing production layouts and dynamic work environments.

BASF and Essentium Team Up to Propel 3D Printing of Functional Parts

Additive Manufacturing

BASF brings to the partnership the most comprehensive portfolio of innovative materials in the chemical industry while Essentium provides its FlashFuse™ electric welding technology, which enhances layer to layer adhesion of 3D printed parts. About Essentium Materials.

Stryker’s Spine Division Debuts 3D-Printed Tritanium® Posterior Lumbar Cage at AANS Meeting

Additive Manufacturing

The cage is constructed using Stryker’s Spine division proprietary Tritanium technology, a novel, highly porous titanium alloy material designed for bone in-growth and biological fixation.

Integrating 3D Printing and Technology at Harrisburg South Middle School

Afinia

Lape strongly advocates using new technology to enhance and engage students in learning. Working with cool, new technology: Students at HSMS programming a Humanoid Robot from Aldebaran Robotics. Now, I get to team up with teachers to introduce them to something new.

Is Hybrid Manufacturing Right for You?

Design 2 Part News

A new approach to manufacturing combines the design advantages of 3D printing with the quality and precision of multi-axis CNC machining. 3D Printing with Various Materials. New Possibilities. By Mark Langlois, Design-2-Part Magazine.

Alcoa Announces Long-Term Contract with GE

Additive Manufacturing

January 11, 2016 NEW YORK–( BUSINESS WIRE )–Lightweight metals leader Alcoa (NYSE:AA) has signed a long-term contract with GE (NYSE:GE) unit GE Aviation for jet engine components in an agreement valued at more than $1.5

Disruptive Technologies Are Changing Automakers’ Needs…

Design 2 Part News

“Disruptive Technologies Are Changing Automakers’ Needs, Creating Opportunities for Suppliers” Autonomous, electric, and connected vehicles require new designs, new suppliers. Finding New Opportunities.

Making a Place for Everything

Design 2 Part News

A new consumer product must be displayed appealingly, yet protected from rough handling. Now a second generation family business, the company was founded by New Jersey-raised Cliff E. By Alan R. Earls, Design-2-Part Magazine.

What Does ‘American Made’ Mean to You?

Design 2 Part News

There’s also a new administration in place that figures to alter the landscape in significant ways. Amid all the new developments, it’s useful to hear what people in the thick of the action think. By Mark Shortt, Design-2-Part Magazine.