Glynn Fletcher Named President of EOS North America

EOS, the additive manufacturing solutions and device manufacturer, has just announced that Glynn Fletcher has been named President of EOS North America, Inc. 3D Printing Business Advanced Laser Materials Direct Metal Laser Sintering Dr. Hans Langer eos EOS North America Glynn Fletcher industrial 3d printing Integra Services President of EOS North America

Farsoon Technologies Now Offers Direct Sales of Metal Additive Manufacturing Solutions in North America with Creation of Farsoon Americas

China-based Farsoon Technologies, a specialist in laser sintering equipment, materials, prototyping services, and technical support, is offering direct-to-consumer sales of their full line of metal. View the entire article via our website.

Trending Sources

EOS North America Launches Life Cycle Solutions Group; Darin Chartier Tapped to Lead

Additive Manufacturing

To unlock the potential and increase customer satisfaction, EOS has announced the launch of its Life Cycle Solutions group which is designed to provide complete customer support including: product installation, material selection, machine service, process improvements, and upgrades.

Additive Industries Presents MetalFAB1 in North America

Additive Manufacturing

At RAPID 2016 , North America’s largest professional 3D printing tradeshow, Additive Industries presents it first truly industrial 3D metal printing system, MetalFAB1. Additive Industries introduces their first industrial 3D metal printing system at RAPID in Orlando.

Agile Manufacturing Acquires the Largest SLA Printer in North America: The iPro 9000XL Monster SLA

3D Printing Industry

No Canadian 3D printing service bureau has quite as much to offer as the Toronto-based company Agile Manufacturing, one of the country’s largest provider of 3D printed parts, 3D printers and 3D printer materials. By Tyler Koslow.

PostProcess Announces Expanded Channel Partner Coverage Across North America

Additive Manufacturing

May 22, 2018 – PostProcess Technologies , the pioneer of automated and intelligent post-printing solutions for industrial 3D printing, announced today it has further expanded its channel partner coverage in North America. Four New Channel Partners Accelerate Growth. .

EOS North America Launches the Integra P 400 Quick-Scan Polymer Industrial 3D Printer

Additive Manufacturing

The new Additive Manufacturing platform achieves 40-50% scanning speed increase, flexible material options and simplified serviceability. Pflugerville, Texas, December 4, 2018 – EOS North America today launched its Integra P 400 polymer Additive Manufacturing (AM) platform developed to meet customer demands for the North American market. Integra P 400 Quick-Scan Polymer Industrial 3D Printer (Photo courtesy of EOS North America). About EOS North America.

EOS Taps Gregory Hayes to Head Additive Minds North America

Additive Manufacturing

Novi, MI—March 1, 2017 – Today, EOS , the global technology and quality leader for high-end 3D printing (Additive Manufacturing or AM) solutions, announced that Gregory Hayes has joined the company as Director of North America Applications and Consulting for EOS North America.

Nano Dimension Engages Reseller Accucode to Meet Growing Demand for DragonFly Pro System in North America

Additive Manufacturing

This partnership is a further step in Nano Dimension’s growth strategy to enhance its sales footprint and meet increased demand for the award-winning DragonFly Pro additive manufacturing platform in North America. 5000’s list of the fastest growing private companies in America.

Nano Dimension Strengthens Footprint in North America: Announces Channel Partnership with Fisher Unitech

Additive Manufacturing

This is the third channel partnership that Nano Dimension has established in North America and represents a significant addition to the Company’s sales reach. The DragonFly 2020 Pro 3D Printer works with conductive and dielectric materials(Photo courtesy of Nano Dimension Ltd.).

Nano Dimension Continues Expansion in North America, Adds GoEngineer to US Reseller Channel

Additive Manufacturing

We look forward to a mutually beneficial relationship that further extends the reach of our precision DragonFly Pro 3D printer in North America, helping customers reduce the cost, risk and time to develop complex multi-layer parts and non-planar electromechanical objects.”.

Visser Precision Inks Agreement with EOS North America, Doubles Its Metal 3D Printing Capacity

Additive Manufacturing

We could not be more proud that Visser Precision is the first-to-purchase our new, high-performance EOS M 300-4 platform, and has also purchased our flagship EOS M 400-4 system to take their AM capacity to the next level,” said Glynn Fletcher, president of EOS North America.

Incodema3D Awarded First Additive Manufacturing Quality Certification From EOS North America

Additive Manufacturing

Novi, March 17, 2017 – EOS , the global technology leader for industrial 3D printing, awarded the first Additive Manufacturing Quality (AMQ) certification in North America to Incodema3D , a leader in direct metal 3D printing.

Research & Markets Releases Global Perspectives for 2016-2022 on 3D Printing in North America, Europe & LAMEA Region

Research and Markets has just released several reports, giving us a comprehensive and global perspective on the 3D printing markets around the world, now—and well into the future. Currently, we are. View the entire article via our website.

Partnership Brings Cevotec's Fiber Patch Placement Additive Manufacturing Technology to North America

Munich company Cevotec specializes in a kind of additive manufacturing called Fiber Patch Placement, designed for the manufacturing of composite materials. Fiber Patch Placement is capable of. View the entire article via our website. 3D Printing Business 3d printing partnerships CAMX 2017 Cevotec Composite Automation Fiber Patch Placement industry partnerships JEC World 2018

EOS Names Glynn Fletcher President of EOS North America, Inc.

Additive Manufacturing

Former GF Machining Solutions president to oversee strong industrial 3D-printing market growth in North America for the global market leader in Additive Manufacturing (AM) solutions. Glynn Fletcher, President of EOS North America, Inc. EOS of North America, Inc.

Stratasys Rolls out Industry Certification Program in North America, Designed to Bridge the Additive Manufacturing Skills Gap

Additive Manufacturing

NASDAQ: SSYS), a global leader in applied additive technology solutions, today rolled out a new industry certification program in North America – designed to more effectively bridge the skills gap it observes in the additive manufacturing industry.

RAPID + TCT 2017 – North America’s Preeminent Event for Discovery, Innovation, and Networking in 3D Manufacturing

Additive Manufacturing

announced a strategic alliance to produce RAPID, one of the longest-running and well-respected industry forums for additive manufacturing and 3D scanning in North America. Lawrence Convention Center, May 8-11 th , 2017 and showcase the newest products, technologies, and materials in 3D printing, additive manufacturing, 3D scanning, CAD/CAE, metrology and inspection technologies. In April 2016, SME and owner of the TCT Group , Rapid News Publications Ltd.

XJet Kick-Starts 2018 with Attendance at Three Industry Tradeshows and a Conference in Europe and North America

Additive Manufacturing

With attendance at internationally renowned conference AMUG as well as AM show Rapid + TCT in the USA, XJet will continue to disrupt the additive manufacturing industry with its unique NanoParticle Jetting ™ (“NPJ”) AM technology, increasing its focus on the North American market.

Disrupting the Disruptors, Low Cost 3D Metal Printing

3D Printing Industry

Materials Bradley Woods Department of Defense Filamet Nasa The University of Wisconsin The Virtual Foundry Tricia Suess UCLA Ultimaker ZF North AmericaThe Virtual Foundry’s newly patented high metal composite filaments create pure metal 3D Prints with common, off-the-shelf FDM printers. This novel solution to a complex problem has sparked a movement in low-cost, high quality, 3d metal printing.

Praxair Announces TruForm™ AMbition Grant Supporting Additive Manufacturing for Universities in North America

Additive Manufacturing

NYSE: PX) announced that it will be offering a limited number of in-kind grants to select North American universities through its surface technologies business. The grant recipients will receive material and engineering assistance to support metal additive manufacturing courses and projects from Praxair Surface Technologies ( PST ). Additive manufacturing, also known as 3D printing, is a process that uses design data to create 3D objects by building up layers of material.

MIT 3D Prints Bacteria to Create Organically Reactive Material

3D Printing Industry

We have already witnessed numerous ways that sensors and robotics can be implemented into 3D printing projects, using non-printed components to cause a reaction in the printed material. By Tyler Koslow.

Mark One Composite Material 3D Printer Receives Prestigious ACE Award

3D Printing Industry

Composites are one of the most interesting new frontiers for 3D printing materials, albeit one that is only at the very (very) beginning of its exploration. … The original post Mark One Composite Material 3D Printer Receives Prestigious ACE Award appeared first on 3D Printing Industry.

Montana State Engineers Develop Bone Material 3D Printer

3D Printing Industry

… The original post Montana State Engineers Develop Bone Material 3D Printer appeared first on 3D Printing Industry. 3D Printers 3D Printing Bioprinting Materials Medical & Dental News North America Prototyping ResearchBy Tyler Koslow.

Materialise, Siemens, Philips, Stratasys, 3D Systems: Medical 3D Printing Partnerships and Products Introduced at 2017 RSNA Annual Meeting

The 2017 Radiological Society of North America (RSNA) Annual Meeting is taking place this week in Chicago, and some major 3D printing industry news has already been introduced at the meeting, View the entire article via our website.

'Professional 3D Printing Made Accessible' -- A Few Questions For: Ultimaker

Featured Stories 3D printing forecast 3d printing interviews 3d printing materials A Few Questions For desktop 3d printers exclusive interview industrial 3d printer John Kawola professional-grade 3D printing ultimaker Ultimaker 3 ultimaker 3 extended Ultimaker North AmericaJust yesterday, Ultimaker, a company with an established reputation for excellence at the desktop, unveiled the now-available Ultimaker 3, the latest in their line of 3D printers. Set to build upon.

3D Printing News Briefs: December 22, 2018

3D Printing Business Metal 3D Printing 3d print shoes 3D printed brake caliper 3d printed fashion 3D printed fashion collection 3d printed fashion footwear 3d printed haute couture 3d printed shoes 3D printed titanium components 3d printing business news 3d printing shoes automotive 3D printing bugatti Ganit Goldstein i3d metal powders mou north america Objet500 Connex3 Color Multi-material 3D Production System roboze Sino-Euro spherical metal powder stratasys Titomic

InterPRO Expanding Industrial Capabilities With Installation of UnionTech's RSPro 800 SLA 3D Printer

3D Printers 3D Printing 3D Printing Materials 3d printer reseller AMUG AMUG Conference DSM Somos EvoLVe 128 material expansion innovation center interpro north america RAPID + TCT RSPro RSPro 800 RSPro production series sla 3d printing stereolithography Union TechOn-demand 3D printing solutions provider InterPRO Additive Manufacturing Group, based in Connecticut, helps companies develop, prototype, and manufacture better products at a faster rate.

RevoMaker Allows Multi-Surface 3D Printing with Embedded Electronics

3D Printing Industry

Support material. As frustrating as support material may be to the human-end of the printing process, it has been a necessity for the success of more complex prints. By Tyler Koslow.

Dr. Shah’s TEAM Lab “Bioprints Metals” with EnvisionTEC’s 3D Bioplotter

3D Printing Industry

3DPI’s Andrew Wheeler recently reported on how Northwestern University Dr. Shah’s TEAM (Tissue Engineering And Manufacturing) Lab has been using 3D printing to experiment with some of the most fascinating materials, including graphene and multi-material hydrogels. By Davide Sher.

6-Axis 3D Printing Bot Released by Arevo Labs

3D Printing Industry

Some of the materials, like ULTEM, are exclusively Stratasys filaments and their portfolio also contains PEEK, PPSU, and SRP. 3D Printers 3D Printing FDM/FFF Industrial Materials News North America RoboticsBy Michael Molitch-Hou.

New Balance Announces 3D Printed Midsoles in New Running Shoe Line

3D Printing Industry

3D Printing Consumers Design Fashion Footwear Materials News North America Retail SportsBy Tyler Koslow. 3D printing technology has been utilized for footwear and orthopedic support by quite a few companies and individuals thus far.

MIT Designers 3D Print Wearer-Reactive Footwear

3D Printing Industry

3D Printers 3D Printing Business Design Fashion FDM/FFF Footwear Materials News North America Production Report Research Retail Videos WearablesBy Tyler Koslow.

Design 114

3D Printing Neurons with Graphene: Stretching the Possibilities at Northwestern University

3D Printing Industry

Graphene has long been a material of interest for biomedical, engineering, and electrical researchers due to its ultra-strong and lightweight structure, its ability to store energy, and its electrical conductivity. 3D Printing Materials Medical & Dental News North America

Biodegradable ABS Filament Thanks to Our Friends, Bacteria!

3D Printing Industry

3D Printing Environment Materials News North AmericaBy Michael Molitch-Hou. LA-based 3D Printlife has been selling 3D printers and filaments for about as long as I’ve been writing for 3D Printing Industry.

Sample 3D Printing Filament Reseller GlobalFSD Hits the US Market

3D Printing Industry

3D Printing Consumers FDM/FFF Materials News North AmericaBy Davide Sher.

Europe 112

Mcor Presents Picture Perfect Color 3D Printing with New Iris HD

3D Printing Industry

The advantages of using an Mcor IRIS over other color 3D printers are the higher color variety and the lower cost of materials and operation. 3D Printers 3D Software Industrial Materials News North AmericaBy Davide Sher.

MCOR 114