Oklahoma State University Dissertation: Bioprinting Neural Tissue with Chitosan-Gelatin Hydrogels


Kevin Roehm of Oklahoma State University is investigating the use of new materials and structures for successful bioprinting. glycerophosphate hydrogel Maker’s Tool Works oklahoma state universityHis findings are outlined in his recently published dissertation, View the entire article via our website. 3D Printing Bioprinting 3D printed hydrogels bioprinting gelatin-chitosan-?-glycerophosphate

Researchers turn Yellowstone methane into 3D printer material

3D Printing Industry

Materials bacteria biofilm green materials greenhouse gases Jim Wilking methane methanotrophs microbes Mines mining photopolymerization recycled material Robin Gerlach SDSM&T SLA South Dakota School of Mines and Technology University of Oklahoma Yellowstone National ParkThough methane only constitutes around 0.00017% of the Earth’s atmosphere, the gas is responsible for 20% of the total radiative forcing created by greenhouse gases.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Praxair Surface Technologies Announces Winners of TruForm Additive Manufacturing Grant


3D Printing 3D Printing Materials Education Metal 3D Printing 3d printing grant 3D printing grants Indiana University-Purdue University Indianapolis Oklahoma State University at Stillwater Pennsylvania State University Praxair Praxair Surface technologies TruForm metal powder University of Dayton university of louisville University of PittsburghPraxair Surface Technologies (PST) is a leading supplier of metal powders to the additive manufacturing industry.

3D Printing News Briefs: April 25, 2017


In today’s edition of 3D Printing News Briefs, we’re covering everything from business to 3D printing, scanning, modeling, and design. EOS joins a manufacturing alliance, while a 3D. View the entire article via our website.

Lawrence Livermore National Laboratory – Lab breakthrough in 3D printing of glass

Additive Manufacturing

A team of LLNL researchers, along with scientists from the University of Minnesota and Oklahoma State University , report the creation of 3D-printed transparent glass components in the latest issue of Advanced Materials , published online April 28.

Glass 52

Quirky Online Marketplace Wants to Out-Fox the Filament Competition

3D Printing Industry

Armed with loads of quirky and sharp-witted humor, new Oklahoma City based online retailer FoxSmart is aiming to do just that. 3D Printing Industry news Materials Retail By Davide Sher.

First, Do No Harm


Rapid Application Group is a 3D printing service bureau based in Tulsa in Oklahoma, USA. These parts are printed using our Duraform PA 12 material which is capable of meeting ISO 10993-5 & 10993-10 standards for biocompatibility (cytotoxicity, sensitization and irritation).

Tulsa 63

Machine Tool Distributor Inks Partnership with Industrial 3D Printing Company to Meet Customer Demand

Additive Manufacturing

Built on a foundation of fairness, after-sales support, and hard work, the company has grown to more than 170 employees covering eight office locations in 14 states including Colorado, Idaho, Illinois, Iowa, Kansas, Missouri, Montana, Nebraska, New Mexico, Oklahoma, Texas, Utah, and Wyoming.

Stryker Spine Division’s Tritanium® C Anterior Cervical Cage Gains Momentum With Surgeons

Additive Manufacturing

The Tritanium C Anterior Cervical Cage is the newest addition to Stryker’s expanding line of spinal implants constructed from its proprietary Tritanium Technology, 1 a novel, highly porous titanium material designed for bone in-growth and biological fixation.

Beginner’s Guide to Drones

3D Printing Hub

Drones are commonly made with light composite material, decreasing the power requirement for flight and increasing maneuverability. Researchers at Oklahoma have also used drones to measure the lower atmosphere so they can issue tornado warnings 20 to 60 minutes earlier than usual.

NAMRI SME Puts the Spotlight on Industry Researchers at 45th Annual North American Manufacturing Research Conference

Additive Manufacturing

Don Lucca, PhD, FSME, CMfgE, regents professor and Herrington chair in advanced materials at Oklahoma State University, presented the NAMRI/SME Founders Lecture. By SME.

Everything You Need to Know about Commercial Drone Flight

3D Printing Hub

What materials can you use to study? If you can manage to read this material cover to cover and retain 100% of the knowledge in it, then you are certain to get excellent marks on the test. These study guides can provide a combination of reading materials, instructional videos, knowledge checks, and sample exams. Oklahoma City, OK 73125. If you’re in the drone flight hobby, then you have surely heard of people using their drones to make some serious money.

The Cities Leading A U.S. Manufacturing Revival

Design 2 Part News

Oklahoma City, where manufacturing job growth has soared 23.1% If the Bay Area is master of the digital economy, Houston ranks as the technological leader of the material one; it is the capital for the energy-driven revival of U.S. By Joel Kotkin and Michael Shires, Forbes.

How Does America “Reshore” Skills That Have Disappeared?

Design 2 Part News

By the time the second and third rounds of deliveries are made, the quality of the materials has declined. By the time the second and third rounds of deliveries are made, the quality of the materials has declined. By Todd Oppenheimer, Craftsmanship.net .

Where Manufacturing Is Thriving In The U.S.

Design 2 Part News

And then there’s the Beehive State’s economically buzzing capital of Salt Lake City in ninth place, where manufacturing job growth is spread along many industries, including aerospace, construction materials, metals and oil and gas-related manufacturing. 57 Oklahoma City and No.