ETH Zurich researcher develops magnetic material for FFF 3D printers

3D Printing Industry

Research Andreas Hagmann Dirk Penner Embedded magnet printing ETH Zurich Julia Carpenter Kai von Petersdorff-Campen Marianne Schmid Daners Mirko Meboldt Stefan Boës Yannick Hauswirth Zurich Heart project

Lawrence Livermore researchers explore ‘sentient’ materials with 3D printing

3D Printing Industry

Lawrence Livermore National Laboratory (LLNL) researchers have 3D printed micro-sized mechanical logic gates. These logic gates can be embedded into materials to make them respond to environmental stimuli and gather data without electronics. Andy Pascall, a chemical engineer and co-author of the research, said, “Certain electric applications are limited, whereas with this system, the material could completely […]. Research Andrew J.

Trending Sources

German materials researchers explore zero gravity metal 3D printing

3D Printing Industry

Researchers at the German Federal Institute for Materials Research and Testing (BAM) and TU Clausthal are working on a project titled “Powder-based additive manufacturing in zero gravity.” Aerospace 3D printing in space BAM DLR Federal Institute for Materials Research and Testing German Aerospace Centre Made in Space microgravity Nasa Parabolic flight Professor Jens Günster Space TU Clausthal zero gravity ZERO-G Airbus A310

ORNL and UToledo agree to research lightweight advanced materials for automotive

3D Printing Industry

Oak Ridge National Laboratory (ORNL), Tennessee, and the University of Toledo (UToledo) in Ohio have signed a memorandum of understanding (MoU) agreeing to conduct research into the design and manufacturing of advanced materials for the automotive sector. The two institutions will collaborate to gain new knowledge in the field of high-strength, and lightweight automotive materials. […].

You Can Assist Research on Sustainable 3D Printing Materials

Fabbaloo

Can 3D printing waste be recycled to create a sustainable material lifecycle? » researchRead the whole entry. »

Harvard researchers 4D print the face of a new class of shape-shifting materials

3D Printing Industry

Research Arda Kotikian Charles Lissandrello Harvard John A. 4D printed, shape-shifting structures hold significant potential for the future of engineering. Be it self-assembling trusses, or medical devices that help inform cell regeneration, the field still has many challenges to overcome before its possibilities become practical. Up to now, one of the greatest challenges to 4D printing has been the ability to create complex, smoothly-curved shapes. […].

US researchers paving way for “new class of materials” with 3D printable nanocomposites

3D Printing Industry

noa have evaluated the potential applications of 3D printable nanocomposites materials. The study published in Science states, “At the intersection of the outwardly disparate fields of nanoparticle science and 3D printing lies the promise of revolutionary new ‘nanocomposite’ materials.” Research Daniel S. Scientists from the University of California, Santa Barbara and University of Hawai?i i at M?noa

Study 82

Lamar University Researchers Develop 3D Printed Self-Healing Material to Cut Back on Waste

3DPrint.com

Material sample with a healed break [Image: Dr. Keivan Davami] A team of researchers from Lamar University in Texas, led by assistant professor Dr. Keivan Davami, recently developed a self-healing. 3D Printing 3D Printing Materials Science & Technology Form 2 Formlabs Form 2 3D printer Lamar University repair research paper resin scientific reports self-healing materials sla 3d printing stereolithography uv curing waste reduction

Texas 81

Australian researchers launch explosive $2 million 3D printer materials partnership

3D Printing Industry

The Australian government has awarded 5 research institutions $2 million USD ($2.6 million AUD) to develop additive manufacturing technology for “energetic materials” Reactive in content, energetic materials cover a body of polymers that can be used as explosives, or solid rocket fuel. 3D printing the materials gives military and defense operations the potential to reduce […].

MIT researchers create advanced 3D printed material mimicking a conch shell

3D Printing Industry

Researchers at MIT have used 3D printing to replicate the innate toughness of a conch shell. The research found a 3D printed structure was up to 85%. Research 3D printed conch shell Advanced Materials Conch conch shell drop tower Grace Gu impact testing Mahdi Takaffoli Markus Buehler MIT MIT research

Meet Our New Rubber-Like Material!

i.materialise

Plus, this rubber-like material is now available in the US! Our Research Project Manager Giovanni Vleminckx has been working hard on getting this material ready for production, which is still fully flexible like the old TPU, but now even more resistant to abrasion and wear.

Louisiana Board of Regents awards $150k to FDM 3D printer material research

3D Printing Industry

University of New Orleans assistant professor Damon Smith has been awarded a grant for research to expand the range of materials available for 3D. Materials Advanced Materials Research Institute AMRI Damon Smith FDM FFF Louisiana Board of Regents Mechanical Engineering nanowires New Orleans University of New Orleans

Virginia Tech Researchers Using a New Method to Create 3D Printed Piezoelectric Materials

3DPrint.com

Originally discovered in the 19th century, piezoelectric materials, which convert stress and strain into electric charges, are in everything from musical greeting cards to cell. 3D Printing 3D Printing Materials Science & Technology journal article nature materials Journal Piezoelectric research paper virginia tech Virginia Tech College of Engineering virginia tech university Xiaoyu Zheng

Researchers Create 3D Printed Bacterial Cellulose Material for Wound Healing

3DPrint.com

3D Printing 3D Printing Materials Medical 3D Printing bacterial 3D printing bacterial cellulose biomaterials cellulose nanofibrils nanocellulose 3d printing material Nanoskin research paper wound careWhen it comes to medical applications, we’ve seen 3D printing used in the past for healing and repairing wounds, whether through the use of 3D printed bandages, 3D printed blood. The post. View the entire article via our website.

Researchers Create Smart Composite Material from Graphene Oxide and Seaweed-Derived Alginate

3DPrint.com

But a team of researchers from Brown University in Rhode Island, which is well-versed in. 3D Printing 3D Printing Materials alginate Brown University composite material graphene graphene oxide hybrid material journal article research paper seaweed smart materials stereolithographyUsually when I think about seaweed, I’m trying to decide which particular sushi roll to order at dinner.

UC Santa Barbara researcher awarded $3 million for extreme 3D printing materials research

3D Printing Industry

University of California, Santa Barbara researcher Tresa Pollock has been granted $3 million by the US Department of Defense (DoD) to carry out research into. Materials Department of Defense Discovery DoD Mary J. Miller metal 3D printing Space Shuttle Tresa Pollock UC Santa Barbara Vannevar Bush Vannevar Bush faculty

Virginia Tech engineers enable 3D printing of piezoelectric materials

3D Printing Industry

Engineers from the Virginia Polytechnic Institute and State University (VT) have found a way to 3D print piezoelectric materials, which convert mechanical energy into electric current.

Purdue Researchers Form Startup for the 3D Printing of Energetic Materials

3DPrint.com

Energetic materials are a class of material that contains high amounts of stored chemical energy that can be released, and they are used in everything from airbags to explosives. 3D Printing 3D Printing Materials energetic materials environmentally friendly Next Offset Solutions Inc. purdue university research paper startup vibration viscous

Collaborative Research Team Develops Density-Graded Structure for Extrusion 3D Printing of Functionally Graded Materials

3DPrint.com

Plenty of research has been completed in regards to FDM (extrusion) 3D printing, such as how to improve part quality and how to reliably fabricate functionally graded materials (FGM). View the entire article via our website.

Russian Researchers Develop Biocompatible 3D Polymeric Materials for Tissue Repair

3DPrint.com

Many researchers and scientists have turned to 3D printing for applications in tissue engineering, and a team from the Polymer Materials for Tissue Engineering and Transplantology Laboratory of Peter. 3D Printing 3D Printing Materials Medical 3D Printing Science & Technology 3d printed bioresorbable implant 3D printing polymers 3d printing repair biocomposite materials human organs journal article Peter the Great St.

The Philippines opens two 3D printing research facilities to remain competitive within ASEAN

3D Printing Industry

The Philippines Department of Science and Technology (DOST) has launched two new 3D printing research: the Additive Manufacturing Research Laboratory (AMREL) and the Additive Manufacturing Center (AMCen). Paringit Fortunato de la Peña MATDEV Multiple Materials Platform for Additive Manufacturing Philippines Department of Science and Technology RAPPID-ADMATEC Research on Advanced Prototyping for Product Innovation and Development using Additive Manufacturing Technologies

$5M funding awarded in America Makes’ 3D printing research projects

3D Printing Industry

America Makes, an Ohio-based additive manufacturing accelerator, has announced the awardees of two Directed Project Opportunities: Acceleration of Large-Scale Additive Manufacturing (ALSAM) and Advancing Additive Manufacturing Post-Processing Techniques (AAPT). Additive manufacturing roadmap America Makes, founded by the U.S Department of Defense (DoD), is part of the Manufacturing USA network, along with thirteen more institutions and […].

Michigan Tech Researchers Recycle Wood Furniture Waste into Composite 3D Printing Material

3DPrint.com

From artwork, instruments, and boats to gear shift knobs, cell phone accessories, and even 3D printers, wood has been used often as a 3D printing material. 3D Printing 3D Printing Materials 3D printing in wood composite materials filament recycling gigabot Joshua Pearce Michigan michigan tech michigan technological university open source 3d printer re:3D recyclebot reprap 3d printer research paper study

3D printing is helping researchers in development of energy-absorbing material

Leslie's Blog

Because 3D printing forms objects differently than traditional machining or injection molding, it enables researchers to think outside the box when developing new materials. The researchers are working on a new type of energy-absorbing material that might be 3-D printable.

3D printed materials research opens up the possibilities of carbon fiber structures

3D Printing Industry

A team of researchers in Russia have published a paper that uses 3D printing to unlock the potential of carbon fiber composite materials. The materials. Azarova aerospace Carbon Carbon Fiber carbon fibre Central Research Institute for Special Machinery D. Golubeva Materials OOO Systems rocket Roscosmos Skolkovo Institute of Science and Technology Skoltech Soyuz Soyuz-U Space V.

GE Research $2.5 M project attains 3D printed Ultra Performance Heat Exchanger

3D Printing Industry

GE Research, the R&D wing of American conglomerate GE, has used 3D printing to design an ultra-efficient, low-emission heat exchanger for power generation equipment. M project led by GE Research. Called UPHEAT (Ultra Performance Heat Exchanger enabled by Additive Technology), the heat exchanger is part of a $2.5 The project was established through the Advanced […].

Materials under the spotlight

3D Printing Industry

Researchers at Nottingham University now has a £3.5 million) grant to develop new 3D printing materials. 3D Printers 3D Printing 3D Scanners Materials researchmillion ($5.12 The team, led by Professor Ricky Wildman, will look into.

Researchers Customize 3D Printing for Functionally Graded Materials with Extrusion Screw

3DPrint.com

In the recently published ‘Development of 3D printer for functionally graded material using fused deposition modelling method,’ researchers discuss current obstacles in the fabrication of parts and. 3D Printing 3D Printing Materials fdm 3d printing functionally graded material metal 3d printing

Arkema 3D Printing Center of Excellence for innovative material research

3D Printing Industry

Arkema, a French chemical and materials company, is expected to open a 3D Printing Center of Excellence within its facility in Exton, Pennsylvania next week. This new R&D lab will focus on developing innovative 3D printing resins through its partner Sartomer, a global supplier of advanced additive manufacturing materials. Materials Arkema Guillaume de Crevoisier N3xtDimension Sartomer Sumeet Jain

University of Birmingham researchers develop SLAM 3D bioprinting method

3D Printing Industry

Researchers from the University of Birmingham have developed a new 3D printing method for soft materials which could enable the manufacture of artificial medical implants. Research Alan M. Known as Suspended Layer Additive Manufacturing (SLAM), this technique uses a polymer-based hydrogel containing particles for a self-healing gel. Liquids or gels can be injected into this medium to build […]. Smith Jessica J. Senior Liam M. Grover Megan E.

MIT – Researchers Design One of the Strongest, Lightest Materials Known

Additive Manufacturing

In its two-dimensional form, graphene is thought to be the strongest of all known materials. But researchers until now have had a hard time translating that two-dimensional strength into useful three-dimensional materials. By David L. Chandler | MIT News.

Researchers Prepare Silicon Carbide-Polymer Composite Materials for SLS 3D Printing

3DPrint.com

3D Printing 3D Printing Materials 3d printing powders china composite materials Concept Laser M2 Cusing journal article PVB research paper selective laser sintering silicon carbide sls 3d printing Southeast UniversitySilicon carbide, or SiC, has a lot of potential for use in industrial applications, like aeronautic and aerospace engineering, the automotive industry, and the machinery industry, due to. View the entire article via our website.

Car Windshields to Be Ground Up for 3D Printing Materials? Polish Researchers Say Possibly

3DPrint.com

Researchers from Poland’s Silesian University of Technology are getting in on the recycling action via 3D printing, and the title of their recently published paper certainly grabs the. 3D Printing Featured Stories 3d printing materials fdm 3d printing low density polyethylene (LDPE) Shredded Car Windscreen Waste

McGill University Researchers Review Bioprinting with Soft Materials: Challenges & Solutions

3DPrint.com

Researchers in Quebec from the Department of Mechanical Engineering at McGill University are delving into more specific topics regarding cell fabrication and tissue engineering in ‘Extrusion. 3D Printing Bioprinting Featured Stories 3d printing bioprinting bioprinting research Extrusion-based bioprinting McGill University Quebec

Military Researchers Present Work on Recycled 3D Printing Material

3DPrint.com

3D Printing 3D Printing Materials 3d printing in the military Army Research Laboratory military 3d printing recycled 3d printer filament recycled plasticThe US military has made no secret of its enthusiasm for 3D printing, and lately has taken a creative, eco-friendly approach to the technology, looking into the recycling of water bottles for 3D. View the entire article via our website.

Researchers in Singapore and Israel develop the “most stretchable” 3D printable material

3D Printing Industry

Published in the journal of Advanced Materials on 7 February 2017, researchers from Singapore and Israel demonstrate a range of stretchy materials suitable for vat polymerisation 3D. Materials Advanced Materials Allnex Amir Hosein Sakhaei Asiga Biao Zhang bucky ball Dinesh K.

London researchers 3D print tungsten disks for improved medical imaging

3D Printing Industry

Scientists from London’s Institute of Cancer Research (ICR) and the Royal Marsden Hospital have 3D printed tungsten disks within a gamma camera for higher resolution medical imaging. Institute of Cancer Research Jan Taprogge Jonathan Gear M&I Materials National Institute of Standards and Technology Owen White Royal Marsden Hospital Wolfmet

Researchers Test PLA CaC03 Composite Materials to Make 3D Printed Splints

3DPrint.com

In a paper entitled “Novel PLA-CaCO3 Composites in Additive Manufacturing of Upper Limb Casts and Orthotics—A Feasibility Study,” a group of researchers looks at 3D printing to. 3D Printing 3D Printing Materials Medical 3D Printing 3d printed casts 3d printed splints 3d printed splints and braces pla composite

Study 87

India: Researchers Investigate Validity of Multi-Material 3D Printing for Structural Applications

3DPrint.com

Despite a multitude of new materials (with. 3D Printing 3D printing material testing 3d printing research abs HIPS multi material 3d printing plaWhile it is obvious the impact of 3D printing is going to continue to be enormous for industries around the world, there are still challenges—and skeptics. View the entire article via our website.

India 63

Researchers Turn to 3D Printing to Turn Mathematical Theory into Strong, Lightweight Materials

3DPrint.com

3D Printing 3D Printing Materials 2d to 3d 3D printed mathematical concept 3d printed structures 3D printing and mathematics 3d printing materials science advanced materials algorithms bricks buckyballs journal article research paper rice university sao paulo schwarzites University of Campinas

Researchers Develop Novel Mixture of Fiber Reinforced Cementitious Composite Material for 3D Printing

3DPrint.com

3D Printing 3D Printing Materials Science & Technology 3d printed cement 3d printing cement cement cementitious composite composite material concrete 3d printer large-scale 3d printing Nanyang Technological University NTU Singapore research paper Singapore center for 3D PrintingWhen being used to 3D print structures like bridges and houses, cement needs to be able to sustain the weight of the layers being extruded on top of it.

Portugal: Researchers Study Ways to Improve Multi-Material SLA/DLP 3D Printing Processes

3DPrint.com

‘Multi-material 3D printing using stereolithography: an optimization approach,’ authored by Daniel Daniel Bandeira, Marta Pascoal, Artur Mateus, and Miguel Reis Silva explores further uses of. 3D Printing 3D Printing Materials dlp 3d printing Multi-material SLA 3D printing sla 3d printing

Smart Materials: 3D Printing Self-Healing Capsules for Concrete

3DPrint.com

In ‘3D printed capsules for self-healing concrete applications,’ researchers are exploring the world of self-healing materials further, with the creation of macro-capsules that can actually be filled. 3D Printing 3D Printing Materials 3d printed capsules 3D printed self-healing capsules 3d printed smart materials 3D printing material study cement chemicals PET PET-G pla PMMA prusa i3 hephestos Prusa I3 Hephestos 3D printer self-healing materials smart materials study