Getting Started with Metal 3D Printing: Introduction

Manufactur3D Mag

This article series will talk about Metal 3D Printing (Metal Additive Manufacturing) Technologies, Materials, Software, Post-processing and Education. The post Getting Started with Metal 3D Printing: Introduction appeared first on MANUFACTUR3D.

Metal 72

MetalFAB1 Printers Officially Feature Sigma Labs Process Monitoring for Metal 3D Printing 

3DPrint.com

To improve the quality control of its 3D metal printers, metal laser powder bed fusion (PBF) manufacturer Additive Industries, announced a new partnership with additive manufacturing quality.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

3D Systems Fills in Metal 3D Printing with Processing Partnership via GF Machining

3DPrint.com

Business Featured Stories Metal 3D Printing 3d systems edm GF Machining interview metal 3d printers metal 3d printing Milling partnership post processing

Renishaw Joins Project to Automate Metal Additive Manufacturing Post-Processing

Manufactur3D Mag

Renishaw has announced a collaboration with Additive Automations as part of a project to automate metal additive manufacturing post-processing. The post Renishaw Joins Project to Automate Metal Additive Manufacturing Post-Processing appeared first on MANUFACTUR3D.

Desktop Metal Receives $2.4M to Develop New 3D Printing Process for US Army

3DPrint.com

Desktop Metal will be developing a sophisticated additive manufacturing (AM) process capable of mass-producing Cobalt(Co)-free hard metal parts for the U.S.

RENA Acquires HES Hirtisation Segment for Post-Processing for Metal 3D Printing

3DPrint.com

3D printing with metal gains yet another boost as RENA Technologies acquires the successful Hirtisation segment of Hirtenberger Engineered Services.

Headmade Materials Receives €1.9 Million in Funding for “Cold Metal Fusion” 3D Printing Process

3DPrint.com

Based in Wuerzburg, Germany, Headmade Materials not only offers patented sinter-based cold metal fusion (CMF) technology to its customers, but also encourages them to consider new ways to design.

Metal 62

The Most Important 3D Printing Technologies & Materials You Need to Know

i.materialise

After the printing process, the model is put into a bath with special soap. The starting process of this technology is quite similar to Laser Sintering: a roller puts a thin layer of powder on a platform. This process is then repeated over and over again until your model is complete. Since your model was only ‘glued’ together, some post-processing is necessary with this 3D printing technology. The exact post-processing steps heavily depend on the material.

Argonne Researchers Develop Defect Detection and Prevention for Metal 3D Printing

3DPrint.com

Scientists at Argonne National Laboratory have found a novel way to identify and prevent defects in metal parts using surface temperatures in laser powder bed fusion.

Metal 92

Altana Acquires TLS Technik and AMT to Make Metal 3D Printing Powder

3DPrint.com

3D Printing Business Featured Stories 3d printing acquisitions 3d printing metal powder A20X ALTANA aluminium alloy AMT chemicals company metal powder atomizer titanium powder in AM processes TLS technik

AMS 2020 Panels: HP’s Binder Jetting Technology, New Metals for 3D Printing

3DPrint.com

3D Printing 3D Printing Events 3D Printing Materials Metal 3D Printing 5N Plus Additive Manufacturing Strategies AMS 2020 atomized powder basf BASF 3D Printing Solutions Binder Jetting binder jetting metals copper 3d printing DED FFF 3d printers GKN Global Advanced Metals hp HP Metal Jet Laser powder bed fusion (LPBF) metal binder jetting metal filament Metal Injection Molding metal jet technology metal powders metaljet MIM open source 3d printers post processing Ultrafuse 316L Volkswagen vw

Enable Manufacturing Offers over 130 Metals for Additive Casting Process

3DPrint.com

UK company Enable Manufacturing was founded just last year, and focuses on the 3D printing of molds for metal casting, which are then used to fabricate high-quality metal production parts. 3D Printing 3D Printing Materials Metal 3D Printing 3d printed molds 3D printing metals 3d printing molds additive casting AISI 316L enable Enable Manufacturing hastelloy steel 3d printing uk

RAM Metal 3D Printing Process Receives Patents in Multiple Countries

3DPrint.com

Metal 3D printing materials developer and supplier Elementum 3D, founded in 2014 by Dr. Jacob Nuechterlein, works to expand the selection of metal materials for additive manufacturing (AM) through. 3D Printing 3D Printing Materials aluminum alloy Aluminum alloy Aluminum 6061 Elementum 3D Laser powder bed fusion (LPBF) metal additive manufacturing patents ram reactive additive manufacturing

Will GEFERTEC’s 3DMP Metal 3D Printing Process Make 3D Printing Large Metal Structures Affordable?

3DPrint.com

German company GEFERTEC’s 3DMP process is a very interesting metal 3D printing technology. 3D Printing arc welding DED Directed Energy Deposition ebaam ebm Gefertec hastelloy large format metal metal 3d printing optomec sciaky TrumpfWe profiled the company and its wire fed 3D printing technology a few months ago. Rather than focus on. View the entire article via our website.

Metal 73

What Makes A Metal Powder Suitable? Researchers Examine Powders in AM Processes

3DPrint.com

Metal 3D printing is becoming a vital source of production for a wide range of industries today, and a unique underrstanding of the required materials continues to grow around it. 3D Printing 3D Printing Materials Metal 3D Printing 3d metal printing additive manufacturing germany industrial 3d printing metal powders

Metal 79

Olaf Diegel's Desktop Distillery Proves Metal 3D Printing is More Fun without Post-Processing

3DPrint.com

Post-processing. No one wants to talk about it, but everyone working with metal additive manufacturing has to do it. While Rize is working to remove the pain of post-processing from. 3D Design 3D Printing Metal 3D Printing 3d printed gift 3d printed supports 3D printing post processing EOS M 290 metal 3d printing Odd Guitars olaf diegel post processing proof of concept solidworks sweden topology optimization Wohlers Associates

Choosing the Right Metal Manufacturing Process for Your Custom Parts

3DPrint.com

When it comes to building end-use metal parts there are multiple options, from traditional processes like CNC Machining and Sheet Metal fabrication to additive manufacturing technologies like Direct. 3D Printing 3D Printing Materials Metal 3D Printing Sponsored cnc machining Direct Metal Laser Sintering DMLS metal 3d printing metal additive manufacturing metal binder jetting sheet metal fabrication xometry

Metal 62

Rapid Tooling Process for Various Industrial Applications

3E Rapid Prototyping

In the process of Rapid Tooling, either Rapid Prototyping (RP) technique can be used to create a mold rapidly or the Rapid Prototyping process can be used to fabricate a tool for a limited volume of prototypes. This process consumes less time and cost than a conventional tool.

Machine Learning and Metal 3D Printing Combine for Real-Time Process Monitoring Algorithm

3DPrint.com

The day is slowly coming when metal 3D printing will be widely considered as a reliable industrial manufacturing method, but there are still some issues to deal with before we get there. A lot of. View the entire article via our website.

Know about the Process of Metal Casting

3E Rapid Prototyping

It is a process in which the liquefied metal is displaced into a cast, which has a hollow enclosed space in a desired form and then allows the metal to cool off and inure. Metal Casting is quite inefficient to those who create by boring, carving, sculpting or other means. Metal casting is used to make complex or tailor-made parts of the metal that is hard to manufacture via machining welding or other means and is very expensive.

The Entire Process of Mold Making

3E Rapid Prototyping

When we talk about the most preferable Mold Making metal alloy, it is steel owing to its durability and toughness. This process involves block molds, blanket molds, glove molds, poured molds, and more. The process of using molds-.

Metal 3D Printing: Correlation Between Laser Power, Cooling Rates & Effects on Parts in LPBF Processes

3DPrint.com

US scientists are learning more about power, temperature, and the effects on metal 3D printing processes, with their findings outlined in the recently published ‘Subsurface Cooling Rates and. 3D Printing 3d printed titanium 3d printing research AM research Laser Based Metal Additive Manufacturing lpbf Ti-64

New Webinar: Achieving Process Repeatability with Additive Metals

Stratasys

In recent years, nothing has garnered more conversation in the 3D printing industry than additive metals. 3D printed metal parts with incredibly complex features can be produced more quickly and sometimes at less cost than traditional manufacturing. The amazing designs and parts achieved with additive metal technologies have brought it to the forefront of design and innovation for some of the biggest players in aerospace , medicine , and energy. Additive Metals Process.

University of Pittsburgh Develops Depowdering Machine for Metal Printing

3DPrint.com

The University of Pittsburgh has developed a depowdering solution for metal 3D printers that could significantly reduce the cost of 3D printed metal parts. 3D Printing Metal 3D Printing ANSYS AMRL depowdering DMLS metal 3d printing post processing powder bed fusion SLM University of PittsburghLead by Professor Albert To, a team of. View the entire article via our website.

Metal 84

Fabrisonic Uses UAM 3D Printing Process to Create Functionally Graded Metal Materials

3DPrint.com

3D Printing Metal 3D Printing composite materials Fabrisonic functionally graded materials gradient materials hybrid additive manufacturing processes Mark Norfolk UAM ultrasonic additive manufacturingFunctionally-graded materials (FGMs) differ from traditional composites in that two materials are joined with a graded interface in order to avoid a boundary between them. As FGMs are resistant to. View the entire article via our website.

Powerful X-Rays Put to Use in Study of Physics Behind Metal 3D Printing Process as Researchers Seek to Eliminate Structural Defects

3DPrint.com

From medical tools and aerospace turbines to components for race cars and satellites, it may seem like metal 3D printing can be used to magically make just about anything, for less money and weight. View the entire article via our website.

Porous Metallic Biomaterials Rely on Additive Manufacturing Processes for Substitute Bone Regeneration Structures

3DPrint.com

In ‘Additively manufactured porous metallic biomaterials,’ Amir A. Zadpoor explores porous metallic biomaterials in research for bone tissue regeneration, discussing elements such as design, View the entire article via our website. 3D Printing 3d printed bone Additive manufacturing in bone regeneration bioprinting Porous Metallic Biomaterials tissue engineering

30 Years of Innovation: Bringing 3D Printing’s Benefits to Metal

i.materialise

We’ve passed the halfway point of our 30th-anniversary blog series, and for October, we’re looking into Metal 3D Printing. 3D printing for plastics was the blueprint for AM innovators to create Metal 3D Printing processes. The appeal of Metal AM was clear.

Metal 81

RIT Uses Optomec's LENS 3D Printing Process to Fix Metal Automotive Component

3DPrint.com

3D Printing Metal 3D Printing 3d printed automotive applications 3d printed automotive parts 3d printed car part 3D printed metal components 3d printing applications in automotive 3D printing hybrid system additive and subtractive manufacturing automotive 3D printing cnc machining custom 3d printed car parts laser 3d printing lens optomec Optomec LENS printers rit Rochester Rochester Institute of Technology subtractive and additive processes sustainability

PrintValley is the First High-Speed Metal 3D Printing, Post-Processing, Verification and Mass Production System

3DPrint.com

3D printing’s ability to manufacture individual and low production runs of customized products is one of the reasons that the process has been quickly adapted for a large number of industries. View the entire article via our website.

Velo3D Lands Largest Metal 3D Printer Order to Date, from Aerospace Customer

3DPrint.com

Business Metal 3D Printing aerospace metal 3d printing metal PBF metal powder bed fusion post processing powder bed fusion velo3dRecently, Velo3D received its largest order in company history since its launch commercially in 2018. An existing aerospace customer placed an order worth $20 million for Velo3D’s innovative, View the entire article via our website.

Wayland Additive’s NeuBeam Metal 3D Printing Process

Fabbaloo

Wayland Additive has introduced a new form of metal 3D printing they call “NeuBeam” that should be superior to laser or electron beam processes. The post Wayland Additive’s NeuBeam Metal 3D Printing Process appeared on Fabbaloo. printer ebm laser metal pbf powder wayland wayland additive

Analyzing The Upside-Down SLEDM Metal 3D Printing Process

Fabbaloo

Researchers have developed an unusual metal 3D printing process called SLEDM, which uses LEDs instead of lasers. The post Analyzing The Upside-Down SLEDM Metal 3D Printing Process appeared on Fabbaloo. research cost laser led metal powder sledm speedBut could it actually work as defined?

NIST Builds Testbed 3D Printer to Study How Users Can Have More Control Over Metal Additive Manufacturing Processes

3DPrint.com

Two years ago, the National Institute of Standards and Technology (NIST), part of the US Department of Commerce, released a report on metal powder additive manufacturing, which included a set of. View the entire article via our website.

Choosing the Right Metal Process

Xometry

CNC Machining, DMLS, Metal Binder Jetting, or Sheet Metal

Japanese Giant Sumitomo Corporation Invests in Sintavia Metal 3D Printing

3DPrint.com

One of the world’s largest traders of goods and services, Sumitomo Corporation of Americas (SCOA) announced it will increase investment in metal additive manufacturing company Sintavia.

Metal 74

3D Printing Metal Matrix Composites: Liquid Metal with Carbon Fiber

3DPrint.com

Of additive manufacturing’s (AM) unique strengths is the ability to process metal more easily than is achievable with subtractive manufacturing, which has the added benefit of producing parts with. 3D Printing 3D printing metal matrix composites carbon fiber composites lead metal matrix composites tin

Metal 54

Electrochemical Machining & Metal 3D Printing Yield Micrometer Dimensional Tolerances

3DPrint.com

New research is emerging from Saarbrücken, Germany as Professor Dirk Bähre and his team at Saarland University work to improve 3D printing with metal. 3D Printing Metal 3D Printing electrochemical machining (ECM) high tolerance metal 3d printing post processing Saarland universityCombining electrochemical machining (ECM) with. View the entire article via our website.

6K Partners with Relativity Space, Commissions UniMelt to Transform Sustainability in Metal 3D Printing

3DPrint.com

3D Printing Featured Stories Metal 3D Printing 3d printed rocket 3d printed rocket engine 3D printing sustainability 6K AM metal printing powders circular economy metal 3d printing Metal AM processes Plasma 3D printing Relativity Space Terran 1 Terran 1 3D printed rocketOn the heels of their recent announcement of commissioning the first two commercial UniMelt systems for sustainable production of additive manufacturing (AM) powders, 6K has now partnered with.

Equispheres’ Aluminum Alloy Powders Can Be Used in Binder Jet 3D Printing Process

3DPrint.com

3D Printing Metal 3D Printing 3D metal powder 3d printed automotive applications 3d printing metal powder aluminum alloy binder jet printing Equispheres McGill University metal binder jetting metal powder sintering testingLast summer, Lockheed Martin invested $5 million, under the Industrial Regional Benefits (IRB) and Industrial Technological Benefits (ITB) Policy, in Canadian materials science company Equispheres. View the entire article via our website.

Solukon Offers New Systems for Removing Powder from Metal 3D Printed Parts

3DPrint.com

Most 3D printing processes come with their own post-processing requirements, and those for metal powder bed additive manufacturing can be especially involved. 3D Printing Metal 3D Printing 3d metal printing powder processes 3d print processing 3D printing post processing formnext formnext 2017 metal powder post processing post-processing equipment powder removal SFM-AT300 SFM-AT800 Solukon Solukon Maschinenbau GmbH

Renishaw Joins Project to Automate Additive Manufacturing Post-Processing

Additive Manufacturing

Global engineering technologies company Renishaw is collaborating with UK start-up business Additive Automations , as part of a project to automate metal additive manufacturing (AM) post-processing, which involves using collaborative robots (cobots) to perform support structure removal.

Titomic Provides A Closer Look at New Metal 3D Printer, and Its Unique Kinetic Fusion 3D Printing Process

3DPrint.com

Less than a year ago, Australian industrial 3D printing company Titomic introduced its innovative Kinetic Fusion process for the first time. Since then, the company has been busy commercializing the. View the entire article via our website.

Metal 62