Example of nonlinear time-transient electromagnetic simulation using EMS for SOLIDWORKS

Javelin Tech Tips

Allen and D.Rodger from the School of Engineering, University of Bath to validate a nonlinear time-transient electromagnetic simulation. This problem is a part of the TEAM series and is called TEAM Workshop Problem 24. Figure 2 – 3D model created using SOLIDWORKS.

How can I be more efficient with my Structure Design & Validation Process?

The Solidworks Blog

Last Saturday I attended a workshop on a well-known software specialized for steel & reinforced concrete structure design and analysis. Below, are the workflow process used in the workshop. So, I used the following workflow: SOLIDWORKS Simulation Integrated Workflow.

Trending Sources

SolidWorks ??? An Unexpected Tool Inside the Laboratory

The Solidworks Blog

Here I would like to share how easily I can use SolidWorks for simulation, and yet how powerful it was in helping me and my team make the necessary modifications and move forward with our project. Modeling Air Flow. Some of these simulated flow patterns are shown below. .

Tools 67

ASME’s AM3D – Discover the ENGINEERING Behind Additive Manufacturing & 3D printing

Additive Manufacturing

Workshops: Take your AM skillset to the next level. Design for AM Workshop: Learn the fundamentals for successful AM optimized design. Topology Optimization Workshop: Develop your skills on how to use this cutting edge technology to rethink your next product design. Put your knowledge to test in the post-workshop design completion. Simulation for AM Design Workshop: This workshop will review how to apply simulation tools to evaluate AM part designs.

Investing a Desirable Future for Cities

3D Perspectives

The research teams at Dassault Systèmes use biomimicry as an innovation process to develop new approaches to urban planning through two problem-solving models: Physarum and Swarms. The second model, Swarms, is a socio-economic system for distributing agents in cities.

The Insider’s Guide to Historicon

Shapeways Blog

It’s North America’s largest historical wargaming convention, with four days of intense gaming, hobby workshops, lectures, and lots of other events. DAK and Dragons is THE historical simulation that answers the age old question, can a Panzer III take on a dragon?

Effeffe Berlinetta: A Car Of Yesterday, Conceived Today, Built in 3D CAD

The Solidworks Blog

Solid Energy performed a complete 3D scan of the Effeffe Berlinetta to capture its geometry inside the CAD model, correcting the inevitable asymmetry and the imperfections typical of any manual work.

How HVD Made Waffly Good Progress with SOLIDWORKS

The Solidworks Blog

With SOLIDWORKS in the kitchen, all HVD had to do was to load its decades-earned data into the platform to have a virtual workshop of waffle iron perfection at its fingertips. offers complete 3D software tools that let you create, simulate, publish, and manage your data.

Beyond BIM Symposium – Innovations in Geometry and Collaboration

3D Perspectives

Unnecessary costs accrue through design collaboration delays and redesign or rework at any stage which challenges the business model of all participants. Design and simulation of complex civil engineering projects on the 3DEXPERIENCE. He previously co-headed the Specialist Modelling Group at Foster+Partners, where his team specialised in computational design and digital fabrication. Training Workshops.

Felix 60

SOLIDWORKS Sponsorship for FIRST Robotics Teams

The Solidworks Blog

SolidWorks Simulation for engineering analysis and simulation  to test your design in a real-world environment. SolidWorks Simulation Premium for stress, thermal, fatigue, structural design optimization. SolidWorks Flow Simulation for flow analysis.

SOLIDWORKS World 2018 General Session Recap: Day Two

The Solidworks Blog

Mike explained that Boom uses SOLIDWORKS to design its entire aircraft – not just pieces of fuselage or the interior but for the whole thing including CAD, PDM, Simulation and AR/VR. Meta is shortcutting the process of taking a CAD model into an AR/VR model.

Bhutan 104

BIM Brings Changes to Façade Design

3D Perspectives

The rapid development of three-dimensional modeling and virtual reality technology helps improve communication efficiency among the multiple parties involved in façade design. SKY SOHU Project BIM models. Model-based design delivery.

Design 109

Mission Everest: How SOLIDWORKS helped Bear Grylls achieve the impossible

The Solidworks Blog

In 2001 he took an unassuming workshop in Semley, Dorset and began manufacturing world-beating paramotors (Imagine a cross between a jetpack and a paraglider and you’re close). offers complete 3D software tools that let you create, simulate, publish, and manage your data. Revolutionary.

Making Cities Bigger and Better

3D Perspectives

They have contained economic activities there, like workshops and commerce. Modeling technology can simulate “what if” scenarios. By Catherine Bolgar. By 2050, two-thirds of the world’s population will live in cities , the United Nations Human Settlements Program forecasts.

Making Cities Bigger and Better

3D Perspectives

They have contained economic activities there, like workshops and commerce. Modeling technology can simulate “what if” scenarios. By Catherine Bolgar. By 2050, two-thirds of the world’s population will live in cities , the United Nations Human Settlements Program forecasts.

SOLIDWORKS World 2018 General Session Recap: Day Two

The Solidworks Blog

Mike explained that Boom uses SOLIDWORKS to design its entire aircraft – not just pieces of fuselage or the interior but for the whole thing including CAD, PDM, Simulation and AR/VR. Meta is shortcutting the process of taking a CAD model into an AR/VR model.

Mission Everest: How SOLIDWORKS Helped Bear Grylls Achieve the Impossible

The Solidworks Blog

In 2001 he took an unassuming workshop in Semley, Dorset and began manufacturing world-beating paramotors (Imagine a cross between a jetpack and a paraglider and you’re close). offers complete 3D software tools that let you create, simulate, publish, and manage your data. Revolutionary.

Females in tuition: tackling gender imbalance in UK engineering

The Solidworks Blog

The Big Bang Fair is a huge annual event at The NEC in Birmingham that aims to get young people excited about the application of STEM subjects (science, technology, engineering, maths) in the real world through hands-on activities, workshops and shows.

Jack Meyer Tells us How He Teaches Students to Design and Print Award Winning 3D Printed Metal Jewelry

i.materialise

While working as a military contractor and building 3D flight simulators, someone showed me an old library book on Ert (the 19 th century French costume jeweller).

EXCLUSIVE – Dave Morton of SME Highlights AeroDef Manufacturing

Additive Manufacturing

This year’s AeroDef , produced by SME and in partnership with industry OEMs, will offer a broad range of activities from panel discussions about artificial intelligence and mixed reality technologies (AR/VR) to presentations and workshops about advances in processes and materials.

America Makes Announces Project Call

Additive Manufacturing

The metrics in which the Design technical area will be assessed by the Institute include complexity exploitation, 3D graded materials, multi-material integration, model-based development, and product customization.