3DPrint.com

FEBRUARY 5, 2019

3D Printing 3d printing in space 3d printing research Copper3D Department of Biomechanics of the University of Nebraska at Omaha international space station ISS 3D printing nasa PLACTIVEChilean startup Copper3D and 3D printing endeavors at the International Space Station are both interests we have followed actively—but never together up until last year when NASA expressed interest. View the entire article via our website.

Nebraska 49

Nebraska Study Omaha Research 49

3DPrint.com

AUGUST 16, 2018

Omaha, Nebraska-based company. 3D Printers 3D Printing 3D Printing Materials ceramic 3d printing dlp 3d printer metal 3d printing Tethon 3D University of NebraskaSLA and DLP 3D printing are, for the most part, polymer 3D printing technologies. That doesn’t mean that they can’t be used with metal and ceramics, however. View the entire article via our website.

Nebraska 51

Nebraska Omaha Ceramic 3D Printing Technology 51

3D Printing Industry

OCTOBER 8, 2018

The study, conducted in association with the University of Nebraska at Omaha, aims to overcome the health challenges faced by NASA astronauts in […]. Research Andrés Acuña Copper3d Daniel Martínez Jorge Zuniga Nasa NASA 3D printing NASA Nebraska Space Grant PLACTIVE University of Nebraska at OmahaNASA is testing the suitability of an antibacterial 3D printer filament for use in future space missions.

Nebraska 87

Nebraska Filament Omaha Study 87

3D Printing Industry

FEBRUARY 4, 2019

The funding was issued by NASA Nebraska Space Grant, one of the 52 space grant consortium in […]. Aerospace Claudio Soto Copper 3D Daniel Martínez International Space Station Jorge Zuniga Nasa NASA Nebraska Space GrantCopper 3D, a US-based Chilean 3D printing materials company, has received another grant from NASA. The money has been awarded to test the properties of antibacterial 3D printing materials for medical devices on the International Space Station (ISS).

Medical 86

Medical Nebraska Materials Company 86

3D Printing Industry

AUGUST 16, 2018

Tethon 3D, a ceramic 3D printing material specialist headquartered in Nebraska, has received a grant to develop a multi-material DLP 3D printer. The grant was awarded by the University of Nebraska, that will also provide the company with technical support. Business Dave Rippe Nebraska Department of Economic Development Tethon 3D university of nebraska

Ceramic 54

Ceramic Nebraska Materials Company 54

3DPrint.com

SEPTEMBER 6, 2018

3D Printing 3D Printing Materials Medical 3D Printing antibacterial antibacterial 3D printing filament Copper3D nasa NASA Nebraska Space Grant PLACTIVE University of Nebraska OmahaA few months ago, Chilean startup Copper3D introduced PLACTIVE, an antibacterial 3D printing filament designed for the production of medical devices such as prosthetics and braces. The company. View the entire article via our website.

Nebraska 62

Nebraska Study Filament Omaha 62

3D Printing Industry

JUNE 9, 2017

The company's headquarters in Omaha, Nebraska currently houses a Stratasys. Applications 3D printing rail equipment 3D printing railway AEI Automatic equipment identification machine vision Nebraska Omaha rail equipment Royce Connerley Stratasys Connex 350 Union Pacific UPrailroad company Union Pacific (UP) has revealed an innovative use of 3D printing to improve locomotive operations.

Omaha 87

Omaha Nebraska Company Stratasys 87

Additive Manufacturing

SEPTEMBER 12, 2018

Two years ago, at IMTS in 2016, Dr. Sealy and his team at University of Nebraska became the first customer of our LENS Hybrid Controlled Atmosphere system,” said Tom Cobbs, LENS Product Manager at Optomec.

Optomec 56

Optomec Medical Nebraska System 56

3DPrint.com

NOVEMBER 12, 2015

A University of Nebraska–Lincoln team of archaeologists and a group of Turkish students were slowly excavating a series of ancient Roman ruins in southern Turkey when they made a thrilling discovery. 3D Scanners 3D Software 3d archaeology 3d archeology models 3d models 3d Photogrammetry ancient roman ruins Antiochia ad Cragum digital photogrammetry medusa Michael Hoff photogrammetry Southern Turkey University of Nebraska Lincoln UNL

Groups 85

Groups Turkey Nebraska 3D Scanner 85

3D Printing Industry

DECEMBER 15, 2016

3D Printing bodyTop 3d printing digest 3D printing latest 3D printing news Augmented Reality Dassault systemes Lemonade Stand Louis Vuitton Nano Dimension next limit dynamics OMUS optomec Sliced university of nebraska University of texasIn today's edition of Sliced, we explore: Louis Vuitton's pop-up shop, U.S universities getting involved with 3D printing, Dassault Systèmes acquiring a software company, an.

Nebraska 87

Nebraska Software Company Modeling 87

3D Printing Industry

SEPTEMBER 12, 2018

3D Printers Controlled Atmosphere Dave Ramahi Dr. Michael Sealy IMTS IMTS 2018 lens LENS 860 LENS 860 Hybrid Controlled Atmosphere System LENS Hybrid magnesium Michael Sealy optomec reactive metals University of Nebraska-Lincoln UNLAt IMTS 2018 this week metal 3D printing provider Optomec, from Albuquerque, New Mexico, released the LENS 860 Hybrid Controlled Atmosphere (CA) System which is capable of working with reactive metals like magnesium.

Optomec 63

Optomec Albuquerque New Mexico Mexico 63

3D Printing Industry

APRIL 27, 2018

This edition of our 3D printing news digest Sliced, asks the following questions: How has 3D printing been used to bring the first statue of a woman to the UK’s Parliament Square? How can 1st-century Roman helmets be recreated with 3D printing? How long is the world’s longest 3D printed chain? All this and more […].

EnvisionTec 82

EnvisionTec Filament Nebraska Siemens 82

3DPrint.com

OCTOBER 6, 2015

3D Design 3D Printing Robotics africa AZIBOt Pan-African Robotics Competition robotics robotics competition Senegal STEM education thingiverse University of Nebraska Lincoln UNLPerceptions by Westerners as to the state of education in Africa are as varied as the continent itself and often run the gamut from gross over-generalizations to ethnocentric condescension. The fact. View the entire article via our website.

Africa 86

Africa Robotics Education Senegal 86

3DPrint.com

APRIL 26, 2018

3D Printing Medical 3D Printing Science & Technology 3d bioprinting 3d printed bioink 3D printed platelets bioink bioprinting massachusetts general hospital mit University of Nebraska LincolnPlatelets play an important role in the bloodstream – if there’s an injury, the platelets are drawn to the site, where they clot and stop the bleeding. They also release growth factors. View the entire article via our website.

Research 52

Research Nebraska Massachusetts Bioprinting 52

3DPrint.com

SEPTEMBER 11, 2018

3D Printers 3D Printing Metal 3D Printing 3d printed medical implants additive manufacturing hybrid systems hybrid manufacturing IMTS 2018 International Manufacturing Technology Show LENS 860 Hybrid Controlled Atmosphere new 3d printer optomec Optomec LENS Machine Tool Series Optomec LENS printers patient-specific printing University of Nebraska Lincoln UNL

Optomec 44

Optomec New Mexico Mexico Electronics 44

Additive Manufacturing

NOVEMBER 22, 2016

Dr. Justin Cramer of the University of Nebraska Medical Center said, “Our work has sought to make models readily available to anyone who wants them, and 3D printing is a large part of this effort. OGDEN, Utah — Nov.

Utah 65

Utah Visualization Nebraska Entertainment 65

Additive Manufacturing

AUGUST 10, 2015

BLACKSBURG, Va., 10, 2015 – How would a 3-D printer work in the microgravity of suborbital space after surviving a jarring ride 100 miles above the earth? A group of Virginia Tech College of Engineering students hope to have an answer next week after a launch at NASA’s Wallops Flight Facility.

Virginia 85

Virginia Puerto Rico Idaho Kentucky 85

3D Printing Industry

JULY 16, 2018

Tethon 3D, a Nebraska-based 3D printing materials manufacturer, has expanded its range of proprietary ceramic powders with the Tethonite high alumina powder. This ceramic powder, designed for use in binder jetting additive manufacturing systems, claims an increased resistance to corrosion, wear, and thermal stress. Ceramic powder material development continues to be an area of focus […]. Materials Castalite Karen Linder Tethon 3D Tethonite Tethonite high alumina powder

Binder Jetting 63

Binder Jetting Nebraska Ceramic Additive Manufacturing 63

Design 2 Part News

AUGUST 1, 2017

The survey covers Arkansas, Iowa, Kansas, Minnesota, Missouri, Nebraska, North Dakota, Oklahoma and South Dakota. Japan’s recent decision to raise the tariff on frozen beef imports will significantly harm Kansas and Nebraska, according to Goss, because Nebraska ranked No.

Nebraska 59

Nebraska Kansas South Dakota North Dakota 59

Rants and Raves Without Rhyme or Reason

AUGUST 25, 2017

Hi all, I spent last week chasing the eclipse down to Nebraska. Here are some of the highlights. Good morning Sunshine! Can’t wait for your show today! This is what the sky looked like just before the eclipse began.

Nebraska 52

Nebraska 52

3D Printing Industry

FEBRUARY 3, 2016

Nebraska-based Tethon 3D has already made a name for itself acting as a ceramic 3D printing service bureau and through the development of ceramic powders and binders for 3D printing with ZCorp machines. By Michael Molitch-Hou.

Porcelain 83

Porcelain Nebraska ZCorp Ceramic 83

3D Systems

JUNE 3, 2015

A Team Approach” is what Kevin L Reick, DDS, MD, FACS, Nebraska Oral and Facial Surgery, describes in this video. A Team Approach to Orthognathic Surgery Wednesday, June 3, 2015 - 09:30 Virtual Surgical Planning (VSP®) is quickly becoming a standard of care for Orthognathic Surgery. “A

Nebraska 76

Nebraska Groups Data Tools 76

Wohlers Talk

JUNE 5, 2016

The effort is being sponsored by billionaire Joe Ricketts, founder and former chairman and CEO of TD Ameritrade, a large discount brokerage located in Omaha, Nebraska. I had the pleasure of visiting Lundeen Sculpture in Loveland, Colorado, last week.

Omaha 130

Omaha Miami Nebraska Denver 130

3D Printing Review

SEPTEMBER 21, 2015

I know this because I grew up in another notorious college football town: Lincoln, Nebraska. If you follow college football at all, then you know about Penn State University’s (PSU) team — the Nittany Lions.

Oklahoma 130

Oklahoma Nebraska Alabama Pennsylvania 130

The Solidworks Blog

NOVEMBER 9, 2017

Then, at 7:30pm EST, each group will join a webinar featuring a one-hour SOLIDWORKS Tips and Tricks presentation by Todd Blacksher of the SOLIDWORKS User Group of Nebraska.

Groups 96

Groups Fresno Omaha Panama 96

Additive Manufacturing

JULY 18, 2018

Hastings, Nebraska. (SOUTHFIELD, Mich., and MINNEAPOLIS, July 12, 2018) — SME and Stratasys Ltd. today announced the winners of this year’s additive manufacturing student competition held at the 54th annual SkillsUSA National Leadership and Skills Conference in Louisville, Kentucky.

Vermont 67

Vermont Nashville Additive Manufacturing Tennessee 67

Afinia

JANUARY 19, 2017

Doug Doescher is the 8th grade Industrial Technology teacher at Fremont Public Schools in Nebraska. He encourages students to use technology to find everyday things needing improvement, and to engineer a solution. 3D Printing is a Hit at Fremont Public Schools.

Nebraska 79

Nebraska Sketchup Course 3D Printer 79

Stratasys Blog for a 3D World

JULY 14, 2015

Tommy Tran and Adolfo Diaz of Hastings High School in Nebraska present their design concept to the judges. The 51 st annual SkillsUSA National Leadership and Skills Conference , held in Louisville, Kentucky, added a new and exciting competition to its lineup this year.

North Carolina 108

North Carolina Louisville Nebraska Kentucky 108

Additive Manufacturing

OCTOBER 12, 2017

Built on a foundation of fairness, after-sales support, and hard work, the company has grown to more than 170 employees covering eight office locations in 14 states including Colorado, Idaho, Illinois, Iowa, Kansas, Missouri, Montana, Nebraska, New Mexico, Oklahoma, Texas, Utah, and Wyoming.

Wyoming 65

Wyoming Montana Idaho Oklahoma 65

Additive Manufacturing

JUNE 9, 2017

Prahalada Krishna Rao , PhD, University of Nebraska-Lincoln, Lincoln, Nebraska. By SME.

Los Angeles 52

Los Angeles Arkansas Conference Wisconsin 52

Axis CAD Solutions

FEBRUARY 8, 2015

Among other things, Todd is a SWUG leader in Nebraska. I have arrived in Phoenix for SOLIDWORKS World 2015! In my short time here I’ve already run into some familiar faces.

Phoenix 52

Phoenix Nebraska Conference Course 52

The Solidworks Blog

JULY 16, 2014

Arlington 61

Arlington Oklahoma Texas Nebraska 61

Additive Manufacturing

MAY 22, 2018

Newly signed channel partners by region include: AdvancedTek , a Platinum Partner reseller for Stratasys and Desktop Metal 3D printers, will bring its decades of 3D printing industry expertise to represent PostProcess in Minnesota, Iowa, Wisconsin, Nebraska, and North and South Dakota.

North America 60

North America America South Dakota Nebraska 60

Additive Manufacturing

JULY 6, 2016

Hastings, Nebraska. By SME. DEARBORN, Mich., July 5, 2016 /PRNewswire-USNewswire/ – SME , working with Stratasys , sponsored a student additive manufacturing competition at the 52nd annual SkillsUSA National Leadership and Skills Conference in Louisville, Kentucky, June 21-23.

Additive Manufacturing 63

Additive Manufacturing Wyoming Idaho Nebraska 63

Wohlers Talk

MARCH 16, 2007

Paul, Nebraska. Dorothy Lynch, creator of the popular French salad dressing, is my grandfathers first cousin. At age 4, I would watch her mix the ingredients and bottle the product in a one-room building no larger than an average American family room. It sat across the street from our home in St. Today, the building bears her name and is used as a hair salon by her daughter.

San Francisco 100

San Francisco Nebraska Denver New York City 100

RPM Tools

MARCH 6, 2014

The DMDI Institute will address the life cycle of digital data interchanged through design, engineering and manufacturing. President Obama announced yesterday the selection of an Illinois consortium led by UI Labs, a nonprofit research and development group led by the University of Illinois, to lead the Digital Manufacturing and Design Innovation Institute (DMDI).

Illinois 40

Illinois Iowa Colorado Nebraska 40

CATI Tech Notes

JULY 20, 2016

In order to obtain the full potential of the powerful tools provided by Computer Aided Technology (CATI), over 70 training classes are offered in August 2016. CATI is certified by SOLIDWORKS, Stratasys and our other partners.

Wyoming 52

Wyoming Alaska Nebraska Iowa 52