3DPrint.com

MARCH 2, 2017

A couple of years ago, 3D printing entered the curriculum at the University of New Mexico’s (UNM) Valencia campus, and researchers at the main campus in Albuquerque are now attempting to use 3D. 3D Printers 3D Printing Education Medical 3D Printing 3d bioprinter 3d bioprinting 3d printed biomaterials biomaterials bone mechanical engineering new mexico orthopaedic research research grant stem University of New Mexico UNM women in stem wrist surgery

Albuquerque 59

Albuquerque New Mexico Bioprinting Mexico 59

3DPrint.com

SEPTEMBER 28, 2018

3D Printing Medical 3D Printing 3d bioprinting 3D printed ligaments bioprinting electrospinning University of New MexicoLigament tears are becoming more common in sports. They’re painful and debilitating, and difficult to treat. The current standard is to replace the torn ligament with tendons, but that can. View the entire article via our website.

New Mexico 81

New Mexico Mexico Bioprinting Medical 81

3DPrint.com

DECEMBER 27, 2018

3D Printing Medical 3D Printing 3d printed bionic eye 3D printed cardiac patch 3d printed eye 3d printed implants 3D printed ligaments 3d printed lung 3d printed medical models 3D printed neural scaffold 3D printed placenta 3d printed prosthetics 3D printed rib 3D printed rib implant 3D printed talus 3d printed tissue BIOLIFE4D Médecins Sans Frontières University of Minnesota University of New MexicoThe stream of 3D printing news coming from the medical world is almost constant.

Human Tissue 87

Human Tissue New Mexico Mexico Minnesota 87

3DPrint.com

JULY 30, 2019

3D Printers 3D Printing 3D Printing Materials 3d electronics printer 3d electronics printing 3d printing electronics aerosol jet 3d printing desktop 3D printer IDS Integrated Deposition Solutions NanoJet new mexico NextFlexComing up on August 8th, the NextFlex consortium will be holding an Innovation Day at its San Jose, California headquarters. The invitation-only workshop (request an invite here) celebrates the. View the entire article via our website.

San Jose 68

San Jose Electronics California New Mexico 68

3DPrint.com

AUGUST 21, 2018

In a three-year experiment, the COSMIAC Research Center at the University of New Mexico has been researching and testing electronics that have been embedded into 3D printed systems. 3D Printing Aerospace 3D Printing 3d printed circuit boards 3d printed electronics 3D printed satellites COSMIAC Research Center University of New Mexico

Electronics 48

Electronics System New Mexico Research 48

3DPrint.com

FEBRUARY 12, 2015

They’ve taken on 3D printing at University of New Mexico’s Valencia campus, and the results are pretty spectacular. 3D Design 3D Printing 3d printing certification 3d printing classes 3d printing education college new mexico STEM education UNM Valencia Equipment made its way onto the campus a couple of years ago, and 3D modeling classes... View the entire article via our website.

Course 87

Course New Mexico Mexico Modeling 87

3DPrint.com

MARCH 5, 2015

New Mexico-based Optomec specializes in the technology of 3D printing of micron-scale electronics and laser technology. 3D Printers 3D Printing Business 3d printer distribution belgium benelux distribution deal distribution partnership europe landre luxembourg Netherlands new mexico optomec While they not only innovate and introduce these technologies to their customers, they have an added goal, and that’s to... View the entire article via our website.

Netherlands 86

Netherlands Optomec Luxembourg New Mexico 86

3DPrint.com

SEPTEMBER 3, 2015

3D Design 3D Printing 3D printed penis 3d printed penis size study anatomy Dr. Nicole Prause sex 3d printing thingiverse UCLA University of New MexicoIn a recent study–slightly more scientific than a recent poll to determine what men view as the ideal lady parts–researchers printed out a range of penis models and then called on women to rate... View the entire article via our website.

New Mexico 87

New Mexico Mexico Research Modeling 87

3DPrint.com

MARCH 15, 2017

3D Design 3D Printing Business 3D printed demo product 3d printing makerspace coffee coffee machine kickstarter kickstarter campaign LulzBot Taz 5 3D printer MAKE Santa Fe makerspace community nanotech new mexico non-profit PERK reduced gravity startup wevolverUnless I want to start the day like Oscar the Grouch, I have a cup of coffee every morning; I once told someone that I drank coffee for the benefit of others. I try my best to keep it at just one.

New Mexico 63

New Mexico Makers Mexico Lulzbot 63

3DPrint.com

MARCH 17, 2017

3D Printing 3D Software Business 3d print quality assurance 3D printing quality assurance 3d software advanced manufacturing commercial alliance industry partnerships Jaguar Precision Machine Morf3D new mexico PrintRite3D Sigma Labs strategic partnershipTwo is better than one, or so the saying goes. Collaborations, alliances, partnerships, what have you – these work because each party brings its own unique strengths to the table; or, to quote.

Sigma Labs 52

Sigma Labs New Mexico Mexico Software 52

3DPrint.com

JANUARY 27, 2021

Additive manufacturing systems supplier Optomec is pretty well-known in the industry for its LENS 3D printers for metal components, but the New Mexico-based company has also made major waves.

Optomec 61

Optomec Electronics Mexico New Mexico 61

3DPrint.com

OCTOBER 8, 2020

Headquartered in New Mexico, Sigma Labs, Inc. NASDAQ:SGLB) is one of the best-known developers of commercial in-process quality assurance (IPQA) software for additive manufacturing of metals. View the entire article via our website.

Sigma Labs 61

Sigma Labs Mexico New Mexico Software 61

3DPrint.com

NOVEMBER 26, 2019

Optomec, headquartered in Albuquerque, New Mexico, has just announced the release of AutoCLAD, a proprietary vision system that is also part of the traditional LENS metal 3D printer family. View the entire article via our website. 3D Printing AutoCLAD Automotive DED industrial 3d printing optomec

Optomec 59

Optomec Albuquerque Mexico New Mexico 59

3DPrint.com

SEPTEMBER 28, 2018

New Mexico-based company Optomec has been around since 1997, and has gotten a lot accomplished in those 21 years. The company is known for two major 3D printing technologies. Aerosol Jet 3D printing. View the entire article via our website. 3D Printing Business EMEA Empa optomec Optomec GmbH

Switzerland 63

Switzerland Optomec Mexico New Mexico 63

3DPrint.com

JUNE 25, 2019

New Mexico-based Optomec, which supplies production-grade 3D printing systems for electronics applications and LENS Directed Energy Deposition 3D printers for the manufacturing of metal parts and. View the entire article via our website.

Optomec 66

Optomec Electronics Mexico New Mexico 66

3DPrint.com

MAY 18, 2018

Sigma Labs, a quality assurance software company based in New Mexico, is expanding to Europe with a new sales and support team overseas for the first time. In addition, the company has hired Markus. View the entire article via our website. 3D Printing 3D Software Business 3d printing patents expansion Markus Meidenstein PrintRite3D Sigma Labs

Sigma Labs 46

Sigma Labs Mexico New Mexico Europe 46

3D Printer

SEPTEMBER 5, 2015

Researchers from the University of California Los Angeles and University of New Mexico have used 3D printing to find the most desirable penis size. To conduct their test , Dr. Nicole Prause and her team made 100 possible dimensions for an erect penis in blue plastic to eliminate any racial bias. They then whittled it down to the 33 which they presented to test subjects.

Los Angeles 212

Los Angeles Mexico New Mexico California 212

3DPrint.com

FEBRUARY 9, 2016

If a full month goes by without Optomec announcing a new distribution partnership, it’s an unusual month at 3DPrint.com. The New Mexico-based additive manufacturing company has been rapidly. View the entire article via our website. 3D Printing Business 3d printing partnerships aerosol jet 3d printing Aerosol Jet technology DETEKT optomec Optomec LENS printers

Optomec 50

Optomec Mexico New Mexico Taiwan 50

3DPrint.com

MARCH 20, 2016

New Mexico-based industrial 3D printing technology manufacturer Optomec is reporting that their Aerosol Jet 5X printing system has been getting quite a bit of attention from companies creating. View the entire article via our website.

Optomec 63

Optomec Mexico New Mexico Electronics 63

3DPrint.com

JUNE 10, 2015

New Mexico-based Optomec, among the world’s largest manufacturers of industrial, production-grade additive manufacturing systems for 3D printing metals and 3D printing electronic components, has just signed a distribution deal with Semitronics Sales Ltd.

Ireland 68

Ireland Optomec Mexico New Mexico 68

3DPrint.com

APRIL 28, 2016

We’re about one-third of the way through 2016, and thus far, it’s been a very good year for Optomec, an Albuquerque, New Mexico-based company specializing in manufacturing different. 3D Printers 3D Printing Business Aerosol Jet Aerosol Jet 5X Aerosol Jet technology australia distribution partnership electronics 3D printing Emona metal 3d printing new zealand optomec Optomec LENS printers

New Zealand 58

New Zealand Optomec Albuquerque Australia 58

3DPrint.com

SEPTEMBER 11, 2018

New Mexico-based Optomec is well-known for both its aerosol jet technology, which is used to 33D print electronics, and its other patented AM process: LENS, which uses Directed Energy Deposition. View the entire article via our website.

Optomec 49

Optomec Mexico New Mexico Electronics 49

The Solidworks Blog

FEBRUARY 26, 2019

Gruenig founded the community-based Rio Rancho Robo Runners , or R4 Robotics, in Rio Rancho, New Mexico, just outside of Albuquerque, in 2005. Since then, R4 Robotics has won the New Mexico state championship 10 times and took first place in the BEST Robotics Texas Regional in 2014 and 2018. With a Ph.D. in Workforce Education, Dr. Shelly Gruenig has long had an interest in helping others build successful, gratifying careers.

Mexico 58

Mexico New Mexico Albuquerque Robotics 58

Additive Manufacturing

APRIL 18, 2016

Senator Tom Udall joined the Senate Appropriations Committee to approve legislation to fund important military construction projects and veterans’ care in New Mexico and across the country. billion increase to the Department of Veterans Affairs, which will help improve care for veterans throughout New Mexico and nationwide. million to construct a new hazardous cargo pad and taxiway for aircraft transporting explosives and other dangerous material.

Mexico 40

Mexico New Mexico Afghanistan Iraq 40

The Solidworks Blog

APRIL 30, 2019

Sites such as New Mexico’s Spaceport America have seen dozens of test launches in the industry’s pursuit of perfecting the endeavour. From Yuri Gagarin’s fledgling foray into orbit to Neil Armstrong’s one small step and beyond, space exploration holds humanity’s attention like no other scientific discipline. The public’s evergreen fascination with galactic travelling has pushed scientific advancement and discovery beyond our earthly atmosphere.

Mexico 66

Mexico New Mexico Simulation America 66

Shapeways Blog

AUGUST 4, 2016

His designs reflect a modern adaptation of symbols rooted in native New Mexico. Looking to revamp your jewelry collection? Symbols are one way to make a statement without going overboard. They also lend as great conversation pieces for history buffs, trendsetters, and Biochem masters alike. Our community across the globe has designing symbols down to an art and we’re showing you the creations you don’t want to miss. .

Jewelry 63

Jewelry Greece Shapeways Belgium 63

The Solidworks Blog

JUNE 19, 2017

Rachel York and I headed out to Albuquerque last week to help the New Mexico SOLIDWORKS User Group celebrate their 10 year anniversary. Sometime after that, Brandon Roby took over, and then in late 2013, William Radigan became the new group leader. It was a great meeting complete with 3D Printing, Rachel’s “The Certification Game” session, students, and three of the four leaders of the group from the past ten years. NMSUG members are all smiles.

Albuquerque 40

Albuquerque Mexico New Mexico SolidWorks 40

The Solidworks Blog

JULY 16, 2014

There were 25 cars at the event, with over 50 drivers and 10 teams, University of Texas at Arlington, Texas A&M, University of Texas, University of New Mexico, Oklahoma State University, University of North Texas, Kansas University, Auburn University, University of Oklahoma, University of Windsor.

Arlington 48

Arlington Oklahoma Texas Nebraska 48

Axis CAD Solutions

JANUARY 1, 2015

The new year is upon us and for some that means SolidWorks World is right around the corner. This year I’ll be giving 3 presentations on rendering, releasing some research from a recent project I’ve completed, making some announcements about an exciting new business venture I’m involved in and stopping by the New Mexico SWUG to give a presentation. This session is meant to expose the new PhotoView user to the tools available inside the software.

Rendering 40

Rendering Mexico New Mexico SolidWorks 40

Materialise

OCTOBER 13, 2016

A reimagining of the new tyrannosaur Timurlengia euotica © Scientific American; original painting by Todd Marshall. The fossilized remains of a new horse-sized dinosaur, Timurlengia euotica, reveal how Tyrannosaurus rex and its close relatives became top predators, according to a new study published in the proceedings of the National Academy of Sciences.

Materialise 55

Materialise Study Mexico New Mexico 55

Wohlers Talk

APRIL 15, 2007

Also, a kit is available from Koba Industries, a machine shop in Albuquerque, New Mexico, for $2,975. Fab@Home has been receiving a lot of attention lately. What is it? Fab@Home is an open source 3D printer development at Cornell University. Hod Lipson, assistant professor of mechanical and aerospace engineering, and Evan Malone, a PhD candidate in Lipsons Computational Synthesis Lab, are working together on the project.

Fab@Home 100

Fab@Home Albuquerque Austria Washington 100

Additive Manufacturing

AUGUST 14, 2018

New technologies in imaging and manufacturing, including 3D printing, are opening possibilities for mimicking biological structures in a way that has been unprecedented in human history,” said Dhruv Bhate, associate professor, Arizona State University. The Grant Represents the Strength of 3D Printing in Arizona Exemplified by the Strong Cooperation Between Industry and Academia. TEMPE, Ariz., August 14, 2018 ?

Albuquerque 46

Albuquerque Utah Austin Colorado 46

Additive Manufacturing

OCTOBER 12, 2017

Built on a foundation of fairness, after-sales support, and hard work, the company has grown to more than 170 employees covering eight office locations in 14 states including Colorado, Idaho, Illinois, Iowa, Kansas, Missouri, Montana, Nebraska, New Mexico, Oklahoma, Texas, Utah, and Wyoming. EOS and Hartwig Inc. partnership brings full-line distribution of additive manufacturing equipment possible. Novi, Mich.

Wyoming 50

Wyoming Montana Nebraska Oklahoma 50

Additive Manufacturing

OCTOBER 30, 2015

polymer scientist at the NASA Johnson Space Center White Sands Testing Facility in Las Cruces, New Mexico. CONSHOHOCKEN, Pa., October 30, 2015— ASTM International and SES – the Society for Standards Professionals have presented the 2015 Robert J. Painter Memorial Award for Meritorious Service to Jess Waller, Ph.D., The award is presented to a person who has contributed the most outstanding service in a given year in the field of standards.

North Carolina 46

North Carolina Sand Mexico New Mexico 46

Additive Manufacturing

JANUARY 17, 2019

Albuquerque, New Mexico – 16 January 2019 — Optomec , a global leader in production-grade additive manufacturing solutions today announced that it has signed a partnership agreement with Phillips Federal. The agreement enables Phillips to continue to provide the best additive manufacturing solutions to maintain the readiness of the military and advance the research and development of new innovations and ideas throughout our government.

Optomec 40

Optomec Albuquerque Government Mexico 40

Additive Manufacturing

JUNE 12, 2018

Albuquerque, New Mexico – June 12, 2016: Optomec , a leading global supplier of production grade additive manufacturing ( AM ) systems for 3D Printed Metals and 3D Printed Electronics, today announced the results of a benchmark study that reveals Directed Energy Deposition (DED) technology to be 10 times faster and five times less expensive than Powder Bed Fusion (PBF) for building mid-size metal parts.

Optomec 43

Optomec Albuquerque Exercises Mexico 43

CATI Tech Notes

MAY 17, 2016

With our recent merger with MCAD, we have 5 additional training centers in Colorado, New Mexico, Washington and Oregon. Did you know that CATI has more than 50 training classes to help you with SOLIDWORKS, Simulation, Data Management and 3D Printing? We have worked with you and your companies to provide you the best tools to get your job done. These tools are very complex and can be difficult to understand without the proper training.

Training 52

Training Oregon Colorado Washington 52

Additive Manufacturing

FEBRUARY 27, 2018

Albuquerque, New Mexico – February 27, 2018: Optomec , a leading global supplier of production grade additive manufacturing (AM) systems, today announced the Aerosol Jet HD System designed to address today’s most demanding electronics packaging challenges – the increasing density of electronic components. Additional benefits of the new system include: Modular, interchangeable material cassettes and interchangeable print heads.

Optomec 40

Optomec Albuquerque Mexico New Mexico 40

Additive Manufacturing

AUGUST 9, 2017

Albuquerque, New Mexico – 9 August, 2017 — Optomec , a leading global supplier of production grade additive manufacturing ( AM ) systems for 3D Printed Metals and 3D Printed Electronics, today announced availability of more than two dozen starter recipes to help customers speed implementation of additive manufacturing solutions. Starter Recipes speed implementation of additive manufacturing across a broad range of metal and electronics materials.

Optomec 40

Optomec Albuquerque Mexico New Mexico 40

CATI Tech Notes

JULY 20, 2016

To help you get the most out of our products, CATI, along with MCAD Technologies, operate a nationwide network of full-services facilities using state-of-the-art equipment, serving clients in Illinois, Iowa, Indiana, Kansas, Kentucky, Missouri, Minnesota, Wisconsin, Alaska, Colorado, Nebraska, New Mexico, Oregon, Utah, Washington, and Wyoming.

Wyoming 40

Wyoming Alaska Nebraska Iowa 40

Additive Manufacturing

AUGUST 16, 2016

Albuquerque, New Mexico – August 16 , 2016 — Optomec , a leading global supplier of production-grade additive manufacturing systems for 3D printed electronics and 3D printed metals, today announced its Aerosol Jet Technology can enable 3D polymer and composite structures to be printed at the micron scale with embedded electronics. Technology Achievement Reduces Cost and Size of Electronics for Communications and Bio-medical Products.

Optomec 40

Optomec Albuquerque Mexico New Mexico 40

Additive Manufacturing

MARCH 11, 2016

Albuquerque, New Mexico. In addition to repeat business from many existing customers, Optomec also developed new business with more than 30 new customers in 2015, resulting in orders for more than 60 industrial 3D printers in total – up more than 50% over 2014. The path forward looks promising as our new customers realize the cost and functional advantages of Optomec solutions and plan for further production rollouts. By Shayna Watson | Optomec.

Optomec 40

Optomec Albuquerque Electronics Mexico 40

CATI Tech Notes

APRIL 20, 2016

With our recent merger with MCAD, we have 5 additional training centers in Colorado, New Mexico, Washington and Oregon. Did you know that CATI has more than 50 training classes to help you with SOLIDWORKS, Simulation, Data Management and 3D Printing? We have worked with you and your companies to provide you the best tools to get your job done right. These tools are very complex and can be difficult to understand without the proper training.

Training 50

Training Oregon Colorado Washington 50