University of Pennsylvania: Controlling Defect Distribution for Programmed Failure

Raney, of the Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, explore the role of defects in mechanical properties in the recently. 3D Printing Featured Stories 3D printing defects 3D printing mechanical properties 3d printing processes University of PennsylvaniaChengyang Mo and Jordan R.

3D Printing Boosts Pennsylvania Children’s Learning Outcomes

3D Systems

3D Printing Boosts Pennsylvania Children’s Learning Outcomes Wednesday, September 9, 2015 - 15:14 Two years ago, Andrew Trexler saw an advertisement for a desktop 3D printer. 3DS has by far the best process and materials in the 3D printing market,” Andrew says.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

Bioprinting at University of Pennsylvania: Impacts on Conductivity in Granular Hydrogels

Researchers are not only aware of this, but as they are part of the process in. To reach the goal of 3D printing human organs, bioprinting must continue to evolve. The post Bioprinting at. View the entire article via our website. 3D Printing Bioprinting bioprinting Conductive Granular Hydrogels for 3D Printing Conductive hydrogels

PSU to accelerate development of high performance plastics with Roboze One+400 Xtreme

3D Printing Industry

Pennsylvania State University (PSU) has acquired an FFF 3D printer from Italian 3D printer manufacturer Roboze. Research Center for Innovative Materials Processing through Direct Digital Deposition CIMP-3D One+400 Xtreme Pennsylvania State University Prof.

Are Ejecta the Reason for Flaws in Powder Bed Fusion Additive Manufacturing?

3D Printing 3d printing analysis Additive manufacturing analysis Additive manufacturing ejecta Inc Moog PBFAM processes The Pennsylvania State University Applied Research LaboratoryWhile users around the globe are busy creating one stunning innovation after another in 3D printing—and some with the ability to change production forever—researchers are just as busy in the lab. View the entire article via our website.

ExOne Opens DREAM Center in North Huntingdon, Pennsylvania, USA

Additive Manufacturing

We believe the DREAM center will further facilitate customer training and design support, helping users optimize 3D printing and the benefits it can bring to their manufacturing processes.”.

Research demonstrates dissolvable supports for 3D printed metal

3D Printing Industry

Researchers at Pennsylvania State University and Arizona State University have published an article demonstrating the possibility of dissolving support material of 3D printed metal parts. Nassar Arizona State University Brian Zucker Center for Innovative Materials Processing through Direct Digital Deposition Christopher S. Hildreth PBF Pennsylvania State University powder bed fusion stainless steel Steel Timothy w Simpson

Further Developments Made in Dissolvable Supports for Metal 3D Printed Parts

3D Printing 3D Printing Materials Metal 3D Printing Science & Technology 3d printed support material 3d printed supports 3D printing post processing 3d printing support materials Arizona State University Dissolvable 3D metal printing supports Pennsylvania State University post processing post processing 3d printed parts stainless steel

Interview with Framlab creatives behind 3D printed Homed shelters for NYC

3D Printing Industry

3D printing has become a buzzword within construction for its potential to automate what is, traditionally, a labor-intensive process. Tjeldflaat architecture construction Environment Framlab Homed New York New York City Toshiko Mori Architect University of Pennsylvania UPennMoreover, additive manufacturing provides architects with new possibilities in materials and design, encouraging structures built with little environmental impact, and low material cost.

3D Printing News Briefs: June 30, 2017

On this last day of June, we will be covering everything from research to business and 3D software in today’s 3D Printing News Briefs. EarthShift Global and HP recently presented at a. View the entire article via our website.

Pitt and General Carbide Partner to Improve Tungsten Carbide Parts via Additive Manufacturing

Additive Manufacturing

Although its use in additive manufacturing (AM), or 3D printing, would seem ideal, tungsten carbide is susceptible to fractures and breakage when exposed to the extreme laser melting process used in printing metals. By Paul Kovach | University of Pittsburgh | Swanson Engineering.

3D Systems Partners with Penn State to Research Direct Metal Printing for DARPA

3D printing industry leader 3D Systems announced that they have formed a partnership with the Pennsylvania State University to research and further develop direct metal printing technology. View the entire article via our website.

New Company and Technology Announcement: Paxis LLC to Introduce New WAV Additive Manufacturing Process and Technology

Additive Manufacturing

WAV, a new large build area industrial manufacturing process with projected speeds of 4x, 8x, and 24x+ of current additive manufacturing photopolymerization systems. Pittsburgh, Pennsylvania USA.

Carbon and Dentsply Sirona collaborate to produce 3D printable dental materials

3D Printing Industry

Carbon, a California-based 3D printer and materials manufacturer, has partnered with Dentsply Sirona, a Pennsylvania-based manufacturer of dental equipment, to produce novel denture materials.

Sirona 107

Oberg Industries and Swanson School of Engineering Extend Additive Manufacturing Research Partnership

Additive Manufacturing

Teams from the University and Oberg are working together to help our customers design products that leverage the latest additive technology with the ability to do prototype builds, production and post-processing at the AMRL and Oberg.”.

A Versatile, Flexible Plastics Process That You May Never…

Design 2 Part News

“A Versatile, Flexible Plastics Process That You May Never Have Heard Of “ By Design-2-Part Magazine. These pliers are an example of how the dip coating process can be applied to hand tool handles.

LPW’s Latest AM Case Study: Porosity – Powder or Process Derived?

Additive Manufacturing

Porosity might originate from the metal powder or the AM process,” says Dr Rob Deffley, LPW’s Research & Development Manager. Porosity – Powder or process derived?’

LPW Chairs Advisory Board of National Manufacturing Hub for Advanced Powder Processes

Additive Manufacturing

MAPP , the EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes, has been created to support UK businesses to exploit the potential of powder based manufacturing routes including metal AM technologies. “It’s

New LPW Technology – Royal Academy of Engineering Research Chair Created to Mine, Process and Alloy Data, and to Model Novel Alloys for Optimising the Additive Manufacturing Process

Additive Manufacturing

Industrialisation of metal additive manufacturing is at the point of delivering vast quantities of data from the complex metallurgical processes involved in creating components through metal AM.

LPW’s latest case study, ‘Maraging Steel: The Effects of Alloy Chemistry on Processability’

Additive Manufacturing

Maraging Steel: The effects of alloy chemistry on processability’ can be found in the LPW website technical library, alongside the brochures and the laboratory services datasheets. LPW’s latest AM case study uses M300 to demonstrate the importance of metal powder specification.

LPW Technology and 3DSIM Adding Intelligence into the AM Process at formnext Hall 3.1 Stand H18

Additive Manufacturing

LPW Technology Ltd , the market leader in the development, processing and supply of high quality metal powders for the AM industry and 3DSIM , the AM software innovation company with easy-to-use tools to predict how to build successful parts, will stand share at Hall 3.1

Additive Manufacturing Research Groups Led by Pitt Engineers Receive More Than $1.7 Million in Latest Funding From America Makes

Additive Manufacturing

million in contracts toward additive manufacturing research from America Makes, the National Science Foundation , and Research for Advanced Manufacturing in Pennsylvania. By Paul Kovach, Swanson School of Engineering.

America Makes Announces Awardees of Directed Project Opportunity

Additive Manufacturing

Additionally, each of the technical tasks are to be performed on materials that have been demonstrated as viable materials for use with the specific AM process proposed, including one of the three classes of metallic materials: Nickel-based alloys, Aluminum alloys, and Titanium alloys.

University of Pittsburgh and ANSYS Develop New Computing Tools to Push the Boundaries of Additive Manufacturing

Additive Manufacturing

Additive manufacturing allows for precise control in creating a component at the micro- and nano-scale level, new processes and software are required to help engineers develop parts that are designed to perform a desired function under a set of conditions. By Pitt | Swanson Engineering.

Pitt Mechanical Engineers Receive $350,000 NSF Grant to Develop Fast Computational Modeling for Additive Manufacturing

Additive Manufacturing

The group’s research is an extension of previous funding from the Research for Advanced Manufacturing in Pennsylvania program ( RAMP ). manufacturing base and further improve the economic sustainability of the additive manufacturing process.”.

Bally Ribbon Mills announces film infusion for 3D printing woven fabrics

3D Printing Industry

Bally Ribbon Mills (BRM), a Pennsylvania-based woven material expert, has announced the release of film infusion capabilities for 3D continuous weaving of fibers. The new technology will eliminate the need to manually post-process the 3D-weaved joint with resin infusion, […]. A resin sheet or frozen film will be infused onto the 3D woven joint by the company. Materials 3D weaving Bally Ribbon Mills BRM E-WEBBINGS

Investment in AM

Wohlers Talk

Early next year, GE is opening a $32 million R&D facility in Pittsburgh, Pennsylvania called the Center for Additive Manufacturing Advancement. Alcoa is investing $60 million in additive manufacturing and 3D printing methods and materials.

Liquid metals show promise in speeding additive manufacturing

Leslie's Blog

Now, new research indicates that metal additive designs can still include support without all the hassle of post processing. The benefit is reduced post-processing. That’s why they experimented with speeding up the process with a bubbling O2 solution.

GE’s New AM Center

Wohlers Talk

In April 2016, GE opened its new Center for Additive Technology Advancement (CATA), located near Pittsburgh, Pennsylvania. Space is available that would essentially double the number of machines and processes in the facility.

ExOne 141

NCDMM and Catalyst Connection Announce Next Phase of AMNOW Program to Support Additive Manufacturing Technology Insertion into the U.S. Army Supply Chain

Additive Manufacturing

They are also very familiar with the work of both organizations and their respective manufacturing and economic contributions to the Tech Belt region of northeastern Ohio and southwestern Pennsylvania. “I Phase 1 Seeks to Develop and Prove Out a Prototype Digital Thread AM Supply Chain.

Material advances in metal 3D printing

Leslie's Blog

This approach makes the manufacturing process significantly more economical. These bits were made through the Concept Laser LaserCUSING process, which also removes any build tension in the bits that can occur in a CNC process.

Precision Medicine World Conference (PMWC) 2019: 5 Top Trends Advancing Precision Medicine

BIS Research

Some of these major focus areas are advancement in technologies that provide computational insights predicting clinical trial success; acceleration in the process of patient diagnosis and treatment; and expansion of the infrastructure that made AI and ML a reality.

BioBots Is A 3D Printer For Living Cells

3D Printing Review

Biofabrication, the process of artificially building living tissue structures, is not a new field — there is more than a decade of research in this area already. biotech startup BioBots sits at the intersection between computer science and chemistry.

6 Prize-Winning Young Minds

3D Systems

11, New York) devised nanobots , which are ingested into the body and block pain in a mechanical, non-addictive process. 16, Pennsylvania) suggested artificial trees to supplement the natural landscape.

SME’s Smart Manufacturing Seminar Series – Exclusive Access to Industry Leaders and Experts Who Are Implementing Additive Manufacturing (AM) in Their Business Operations

Additive Manufacturing

Pittsburg, Pennsylvania. Quality Processes & Regulatory Considerations for Metal AM. Philadelphia, Pennsylvania. Philadelphia, Pennsylvania. Understand how full traceability is maintained through the process…all done at a fraction of the powder’s original cost.

NCDMM and Catalyst Connection Announce AMNOW Program to Support Additive Manufacturing Technology Insertion into the U.S. Army Supply Chain

Additive Manufacturing

Our experienced team specializes in identifying the needs, the players, the technologies, and processes to attain optimal solutions for our customers. Blairsville, Pa. April 30, 2019.

LPW’s US Operation Achieves AS 9120A

Additive Manufacturing

11 January, 2017: Runcorn, UK: LPW Technology , the market leader in the development, processing and supply of high quality metal powders for the Additive Manufacturing (AM) industry, continues to extend its quality assurance standards.

Proposed ASTM International Guide to Create Principles of Design Rules in Additive Manufacturing (3D Printing)

Additive Manufacturing

This standard will serve as a foundation that supports the development of design rules for the growing number of additive manufacturing processes and machines.”. West Conshohocken, Pennsylvania USA. CONSHOHOCKEN, Pa.,

LPW’s New Laboratory Services Datasheet Focuses on Tap Density Testing

Additive Manufacturing

The results can give an indication of the powder’s cohesivity, which can influence flow and affect its behaviour in the additive manufacturing process. situated near Pittsburgh, Pennsylvania, providing analytical services, product inventory and sales support to North and South America.

Metal AM Company LPW Ranks in Top National Export League for 2nd Year

Additive Manufacturing

The league table ranks the UK’s small and medium-sized (SME) companies with the fastest-growing international sales, and LPW, the global leader in the manufacture, development and processing of metal powders, is the only metal AM company to appear.

SME’s Smart Manufacturing Seminar Series – Highlighting Additive Manufacturing (AM) Materials

Additive Manufacturing

Quality Processes & Regulatory Considerations for Metal AM. Philadelphia, Pennsylvania US. Philadelphia, Pennsylvania US. 3D printing technology is rapidly changing and now is the best time to get in to take full advantage of this disruptive manufacturing process.

Carpenter Enhances Additive Manufacturing Capabilities with Acquisition of LPW Technology Ltd.

Additive Manufacturing

LPW is based in Widnes, Cheshire, United Kingdom with additional processing operations near Pittsburgh, Pennsylvania. Expands Growing Leadership Position as Additive Manufacturing Solutions Provider.

Alcoa Expands R&D Center to Deepen Additive Manufacturing Capabilities

Additive Manufacturing

60 million expansion to include state-of-the-art additive manufacturing center focused on feedstock materials, processes, product design and qualification. Company unveils Ampliforge™ process, an Alcoa-invented technique combining additive and traditional manufacturing for enhanced properties.