RepRap Universal Plastic Pellet Extruder project

DIY 3D Printing

extruder pellet reprap Here is a new extruder developed by Richard Horne that can print directly from pellets. It is much cheaper to print from pellets then to buy filament. One could also grind disposed or failed prints and recycle them directly.

RepRap 232

German RepRap X400 Prints Spare Parts for SCHMID Lifting Platforms

3DPrint.com

Quickly emerging as one of the industrial 3D printing pioneers in all of Europe, the Munich-based company German RepRap GmbH has been spending the better part of this year branching out across the. 3D Printers 3D Printing Business 3D printed plastic covers 3d printed replacement parts 3D printed spare parts 3d printing germany airbus german reprap German RepRap X400 Hürner-Funken Mario Schmid operating equipment operating lift platform SCHMID SCHMID Hebebühnenverleih x400 3d printer

Trending Sources

RepRap: Blog: Still Extruding: RepRap Price Points

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Still Extruding: RepRap Price Points. But just because the lowest bar has dropped does not mean that all RepRap are created equal.

RepRap X2V3 3d printer with two independently moving extruders

DIY 3D Printing

RepRap X2V3 is the new generation of the RepRap X2 dual extruding 3D printers line. That design has several disadvantages like idle extruder leaking plastic or catching and knocking off the printed object. nozzles have been used on various RepRap machines for a while now.

RepRap 198

RepRap: Blog: Conducting Plastic Experiments

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Conducting Plastic Experiments. With the increasing number of multi-colour RepRaps out there (Ahem! We have been experimenting with putting conducting particles in printing plastic, inspired by this paper: [link]. plastic film over it.

German RepRap presents liquid 3D printing with polyurethane

3D Printing Industry

German RepRap, manufacturers of FFF 3D printers and ebalta Kunststoff GmbH, a materials company, have announced a new polyurethane (PU) based material for 3D printing. The manufacturer says their PU plastic material has isotropic mechanical properties due to chemical crosslinking. Materials German RepRap Lawrence Livermore National Laboratory Polyurethane silicone TPU TU

Interview: Vik Olliver, the first RepRap volunteer – ‘We didn’t just build a 3D printer’

3D Printing Industry

This week marks the 10th anniversary of the RepRap project. Vik Olliver was the first RepRap volunteer. 3D Printers Diamond Age Solutions Four Thieves Vinegar Collective Imagin Plastics Makerbot Maurice Williamson Meccano Michael Laufer RepRapis10 RepRep Anniversary Vik OlliverAt 3D Printing Industry we’re interviewing some of the earlier pioneers and leading figures in the open source and FFF 3D printer world.

German RepRap Introduces New Polyurethane Material, Developed with ebalta Kunststoff for Liquid Additive Manufacturing Process

3DPrint.com

3D Printing 3D Printing Materials 3D printing liquid materials 3d printing material 3D printing plastic 3d printing processes ebalta Kunststoff Gmbh Formnext Frankfurt 2016 german reprap germany LAM Liquid Additive Manufacturing liquid plastic liquid printing polyurethaneTypically when we hear about polyurethane (PU) material, it’s being utilized as a foam for things like mattresses, upholstery, insulation, or even mixed with shaving cream to 3D print a statue.

3DPrintMi minimalist open frame style RepRap 3d printer

DIY 3D Printing

Built from the ground up, this Reprap requires very little tooling and does not need specially made parts (e.g. 3dprintmi fff instructables low cost new diy 3d printer open source 3d printer reprap

RepRap 166

First reprapped circuit

RepRap Blog

Ed and I have a final-year student - Rhys Jones - who''s working on RepRap for his MEng research project. It was made entirely automatically by the RepRap machine. It''s the RepRap opto endstop circuit.

RepRap: Blog: Sourcing a 3d Printer

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Its amazing to see how much the RepRap community has grown in the 6 years since it started , and little over 3 since RepRap 1.0 RP (Plastic Parts).

RepRap 111

RepRap: Blog: Vapor Treating ABS RP parts

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Any idea what will happens with PLA plastic? posted by sphetz reprap : March 01, 2013 1:07 AM.

RepRap 114

Michigan Tech Researchers Publish Paper on New Recyclebot 3D Printer

3DPrint.com

3D Printing 3D Printing Materials 3d print recycled plastic 3d printer filament from recycled plastic 3d printer filament recycled plastics 3d printing filament 3d printing plastic waste fff 3d printer Joshua Pearce michigan technological university mtu open source plastic waste recyclebot reprap 3d printer sustainability

RepRap: Blog: Announcing AMRI: Advanced Manufacturing.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. We will also take questions via #reprap IRC channel. Anderson Ta - "Digital light projection (DLP) photolithography of plastics and hydrogels".

RepRap: Blog: More Printed Circuitry

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Previously the plastic and metal were printed on separate machines. The RepRap project is making some big steps forward.

RepRap 110

RepRap: Blog: Colour Mix Progress

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Pia Taubert, who has been working for the past few months in the RepRap Lab at Bath on the colour mixing project, has got continuous control of the mix working.

RepRap: Blog: Colour mixing

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. What about writing the software to do the part infill using the purge plastic?

RepRap: Blog: New Extruder Design

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. I have (finally) finished my 1.75mm filament extruder design for RepRap. Wing-nut drive to spread the torque loading on the plastic gears.

RepRap: Blog: Reprap Prusa Iteration 2 Build Event in Cologne.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Reprap Prusa Iteration 2 Build Event in Cologne Germany in December.

RepRap: Blog: Rewriting history

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Erik, of course, has done a superb job of estimating the World population of RepRaps together with RepRap-derived machines like MakerBots and 3D-Systems/BfBs. But I was recently asked for the history of just the RepRap population. Spring 2007 - The first RepRap Darwin was finished. This is the first true RepRap replication.

RepRap: Blog: On the Challenge of 3D Printing Sugar for.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. So, in 2008 I joined the RepRap community and learned everything I could about MakerBot and RepRap. Thanks for RepRap and all you do for RepRap!

Revisiting the recycling of Reprap plastics

RepRap Blog

The question of recycling waste products from a Reprap machine is revisited. read more

Yearly RepRap adventures roundup 2012

RichRap

Another year of RepRapping development adventures is over (for some historic reason my development season runs from October to the end of September each year) In the last years roundup (2010-2011) I had the following to say  Link if you need a reminder.

RepRap: Blog: Big RepRap Refereed Journal Article

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Big RepRap Refereed Journal Article. We have just published a paper in the journal Robotica about how RepRap started, its development, and how it has got to where it is now. RepRap – the replicating rapid prototyper, Robotica (2011) volume 29, pp. Nice to know the detailled origin of the reprap, that's why I love it.

RepRap Universal Mini Extruder

RepRap Blog

It is primarily intended to be small and light enough to mount directly on Huxley, but it should work on virtually any RepRap or similar 3D printer. I have been designing a new printable extruder.

RepRap: Blog: Why is 3D printing such a powerful way to make solid.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. But you RepRap Blog readers eat mathematical arguments for breakfast.

RepRap 113

RepRap: Blog: Like a glue gun on a robot arm.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Weve always described the RepRap in simplistic terms as being like a glue gun on a robot arm.

RepRap: Blog: Around the RepRap Community 07/15/2011

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Around the RepRap Community 07/15/2011. Wait does that mean that RepRap now has Hardware side support for multiple extruders? The Wades Extruder has been the gold standard of strength and efficiency in the RepRap community for over a year now. RepRap wiki dev Madscifi has done an amazing guide on how to use clay as a support material.

RepRap: Blog: Best of the RepRap Wiki 3/11/11

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Best of the RepRap Wiki 3/11/11. Now for updates of note this week in our Wiki: The Penn State RepRap Project.

TCT Show 2014 Industry Review & Technology round-up - RepRap Community Hub

RichRap

The 2014 TCT Show was another total success for the RepRap, Open Source and Maker community. The RepRap Hub this year was dedicated to individuals and projects doing all sorts of work in the RepRap and Maker communities. It would not be RepRap, without RepRapPro!

RepRap: Blog: New open source slicer: CuraEngine!

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Because Cura is developed to work with the Ultimaker and most other RepRap-based designs, wed like to ask you what you think of the new engine.

RepRap: Blog: Print any colour you like.

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. Some time ago I started to build a mixer nozzle for RepRap that would take four coloured filaments and combine them out of a single nozzle.

RepRap: Blog: 0.01 Layer Height on a Prusa Mendel

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. I moved to Marlin Firmware (Which has became all the rage in the RepRap IRC Channel ), and Slic3r for Gcode generation (Does same job as Skeinforge ).

3DR RepRap Delta Printer - Part 2 - Assembly preparation and build

RichRap

Hello all, This is Part 2 of the 3DR RepRap Delta printer, in this post we will look at the preparation of parts, how the printer is assembled and string our Spectra Line drives. And finally the first set of RepRap Community Hub stand graphics were printed and delivered today - looking nice!

Milling plastic with a Reprap machine?

RepRap Blog

It might not be impractical after all. read more

RepRap: Blog: Printed Circuitry: All covered up

RepRap Blog

RepRap: Blog. Blog for the RepRap project at www.reprap.org - a project to create an open-source self-copying 3D printer. The problem is that I need a perfect plastic solid layer, and I only have one layer to achieve this in. 100% Reprapable Repraps.

3DR RepRap Delta Assembly build - Part 3 Electronics

RichRap

Hello all, This is Part 3 of the 3DR RepRap Delta printer, in this post we will look at the final assembly and electronics, setup and wiring. As with the hot-end if you have any issues fitting the Pneumatic fitting, use a little heat to soften the plastic and screw in tight.