Get Hands-on with Advanced Simulation at SOLIDWORKS World 2019

The Solidworks Blog

This year at SOLIDWORKS WORLD 2019, if you’re a Simulation aficionado, you’re going to be spoiled! We’re excitedly looking forward to announcing the commercial availability of our latest simulation solution, SIMULIA Structural Simulation Engineer (SSE).

Simulate Efficiently with the SOLIDWORKS Simulation Load Case Manager

Javelin Tech Tips

Getting valid, informative, and useful results is the goal of any design validation and verification activity, whether it be through simulation or physical testing. Simulating with the Load Case Manager allows you to add all relevant loads and fixtures to a single SOLIDWORKS Simulation Study.

Trending Sources

Cleaning up our oceans with simulation

3D Perspectives

CLEANING UP OUR OCEANS WITH SIMULATION. Bénédicte Dommergues, a modeling engineer at The Ocean Cleanup, presented their achievements with XFlow at the 2017 XFlow User Conference held in Madrid, Spain. Best Presentation, awarded by XFlow’s General Manager, David Holman.

Webinar: Addressing Bottlenecks in Simulation

Tech Clarity

Michelle Boucher will share her recent research on Simulation Bottlenecks during a webinar on Thursday September 29 at 2:00 EDT. The post Webinar: Addressing Bottlenecks in Simulation appeared first on Tech-Clarity.

3DEXPERIENCE World 2020: Call for Presentations and Training Agenda Updates

The Solidworks Blog

In fact next year in Nashville, attendees will be able to choose from 50 percent more training sessions than previous years, and with a much wider offering of learning experiences on the latest innovations in 3D Design, Data Management, Simulation, and Manufacturing. 3DEXPERIENCE World?

Webinar: Solving the Bottlenecks of Simulation Preprocessing

Tech Clarity

On Thursday, April 27 at 2:00 EDT, Michelle Boucher will share tips to improve the efficiency of simulation preprocessing. During this webinar, Shawn Wasserman, simulation editor at ENGINEERING.com, will join Michelle.

CFD webinar : Are you using CFD during design? (webcast)

Tech Clarity

Presentations Slideshow Analysis CAE CFD Computational fluid dynamics Design design decisions Digital Engineer Siemens Simulation Simulation Driven Design Software Solid Edge Webcast WebinarDo you worry about overheating in your product designs?

SOLIDWORKS Simulation Accuracy (?)

Javelin Tech Tips

A common concern I hear when presenting SOLIDWORKS Simulation is whether or not the results are accurate. In an attempt to fully explain NAFEMS and why it should be reassuring, I present you my latest blog installment. Simulation Benchmarks.

Additive Works to Present Latest Version of Amphyon Software at Formnext 2018

3DPrint.com

German company Additive Works has spent a great deal of time perfecting its Amphyon software, a simulation tool for powder bed-based, laser beam melting 3D printing that allows users to run through. 3D Printing 3D Software 3d printing simulation software Additive Works Amphyon formnext formnext 2018 simulation

Materialise Introduces New Simulation Module for Metal 3D Printing at TCT

3DPrint.com

The TCT Show in Birmingham, England draws to a close today, but it’s been a packed few days with lots of new product announcements and presentations. 3D Printing 3D Software 3d printing simulation software materialise Materialise Magics simulation softwareOne of those announcements came from. View the entire article via our website.

SOLIDWORKS Simulation Educational Event in Mississauga, ON.

Javelin Tech Tips

as we showcase how design and manufacturing companies similar to yours are solving their most challenging plastics, fluid flow, thermal and mechanical design problems using SOLIDWORKS’ powerful CFD simulation and design validation capabilities. SOLIDWORKS Flow Simulation.

Webinar: Solving the Bottlenecks of Simulation: Postprocessing – May 18, 2PM ET

Tech Clarity

On Thursday, May 18 at 2:00 EDT, Michelle Boucher share best practices to improve the efficiency of simulation postprocessing. During this webinar, Shawn Wasserman, simulation editor at ENGINEERING.com, will join Michelle.

University of Manchester to present an Industry 4.0 roadmap

3D Printing Industry

Summit and Expo Laser Processing Centre LightMachinery MACE MIDAS Modelling and Simulation Centre National Graphene Centre Paulo Bartolo School of Mechanical Aerospace and Civil Engineering Tim Newns University of ManchesterThe University of Manchester (UoM) has announced that it will issue a blueprint for advancement towards Industry 4.0 in the UK.

Test the life of your models with SOLIDWORKS Simulation Fatigue Module

Javelin Tech Tips

The SOLIDWORKS Simulation Fatigue Module is available with Simulation Standard and is included in every SOLIDWORKS Simulation package. With a fatigue study set up (static study, number of cycles), the results are presented and are clear and easy to read!

Structural and Fluid Simulation for Oil & Gas Products

The Solidworks Blog

The design of oil and gas products presents many unique challenges. These components present different failures in the oil well that causes production problems and can lead to higher costs. Finally, the problem in the connection is the leakage presented in the seal area.

DraftSight LIVE 2017 Call For Presentations

The Solidworks Blog

Calling all 2D CAD and drafting experts, come share your knowledge and expertise as a presenter at DraftSight LIVE! How is it going to benefit me if I submit a presentation idea? Submitting a Presentation Proposal. Submitting a presentation proposal is easy.

Free Simulation!?!

Javelin Tech Tips

Did you know that every version of SolidWorks comes with free simulation tools? use the full SolidWorks Simulation package to take advantage of additonal capabilities. If presented with the following (first time use), select the My.SolidWorks link provided: 3.

How to Easily Democratize Simulation Results

The Solidworks Blog

Last year, I attended a conference about Simulation & Analysis during which a senior engineer mentioned in his presentation that he has a hard time sharing Simulation results to colleagues and non-simulation users.

Simulating Fatigue Failure: It’s Like 1,000 Punches from My Grandmother!

The Solidworks Blog

This phenomenon of fatigue failure can be simulated using Finite Element Analysis technology. Instead of creating prototypes, we can use software and simulate the phenomenon virtually. This particular curve is present for most of the materials in our Material database.

Snow Tire Simulation: Where the Virtual Rubber Meets the Road

The Solidworks Blog

It turns out that SIMULIA’s FEA simulation software is used by nearly every tire manufacturer in the world to simulate realistic tire performance such as inflation, rolling resistance, noise, tire-road contact, hydroplaning and even behavior of the tire during anti-lock braking!

AMOS project presents DED findings at opening of UK Nuclear Advanced Manufacturing Research Centre

3D Printing Industry

Three years in, and the Additive Manufacturing Optimisation and Simulation (AMOS) project is making progress. Recently, the Canadian/European consortium was called to present its findings at the opening of the new UK Nuclear Advanced Manufacturing Research Centre (AMRC) […]. The aim of this project is to develop directed energy deposition (DED) for the repair of components used in aerospace.

Motion Simulation in SOLIDWORKS

Javelin Tech Tips

From the SOLIDWORKS help: SOLIDWORKS Motion studies are graphical simulations of motion for assembly models. Motion simulation assumes all parts to be rigid during the simulation, meaning that during contacts, no deformations will take place. The first thing you need to do is to select the type of simulation you want to perform. There are 3 types of motion simulations in SOLIDWORKS including Animation, Basic Motion, and Motion Analysis.

Additive Manufacturing Simulation: Simufact presents their solutions and case study under the umbrella of Hexagon

Additive Manufacturing

Hamburg, Germany, November 1, 2017 – At this year’s formnext fair in Frankfurt/Main (Germany), Simufact Engineering provides first insights into the third generation of Simufact Additive, their solution for the simulation of metal additive manufacturing processes.

SOLIDWORKS Simulation – Bolt Connector

Javelin Tech Tips

SolidWorks Simulation uses a beam element to represent the bolt shank and uses rigid bar elements to connect the beam to the flanges. It simulates the bolt preload using thermal expansion/contraction. Simulation FEA Tech Tips bolt connector

EMO 2017: Simufact to Present Process Simulation Solutions for Machine Tool Makers and Mold Makers

Additive Manufacturing

Hamburg, Germany, September 11, 2017 –At this year´s EMO , Simufact – an MSC software company – will be presenting their process simulation solutions aiming at tool and mold makers. Forming simulation of a fork – Otto Vollmann GmbH & Co.

SOLIDWORKS 2016 Simulation Motion Tips

CATI Tech Notes

SOLIDWORKS 2016 Simulation Motion Tips. The presentation that night was on Simulation Motion 101 and was given to us by Hari Padmanabhan from SOLIDWORKS. SolidWorks Support Design Validation General Info Simulation SOLIDWORKS Tips and Tricks

Design for the Ages with SOLIDWORKS Simulation Fatigue Analysis

Javelin Tech Tips

Whether it’s game 7 of the Stanley Cup Finals, or 20 years into your design’s 30 year operational life, fatigue is an ever present concern that must be addressed! Luckily for you and your designs, SOLIDWORKS Simulation Fatigue Analysis (included with SOLIDWORKS Simulation Standard, Professional, and Premium versions) allows you to ensure fatigue resistance from the comfort of your desk, letting you skip the gym entirely! SOLIDWORKS Simulation Fatigue Studies.

How accurate is FEA and CFD simulation?

The Solidworks Blog

A question I have been asked throughout the years when presenting Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) to many companies is: How accurate is FEA and CFD simulation? SOLIDWORKS Simulation (FEA) validation example.

CAASE 2018 highlights design and simulation software for Additive Manufacturing

3D Printing Industry

The Conference on Advancing Analysis and Simulation in Engineering (CAASE) took place June 5th-7th with more than 500 industry professionals assembling in Cleveland for technical presentations, workshops, training courses, and an exhibit. The event catered to the broader engineering simulation community with four key themes across physical and biological systems, simulation governance and democratization, business […].

SOLIDWORKS Simulation Lunch & Learn Events in Western Canada

Javelin Tech Tips

SOLIDWORKS Simulation Example. Learn how to use the SOLIDWORKS Simulation Suite to make better design decisions and ultimately – better products. In this event, we will be reviewing the capabilities of our Simulation and Flow Simulation products.

Designing a Metal Detector with SOLIDWORKS and EMS Simulation software

Javelin Tech Tips

The principle of a metal detector is quite simple and as the name suggest it is a device that can identify if metals are present say in hard to find places like under the soil, inside rocks etc. Advantages of using Simulation. Metal Detector in use. Electromagnetics and its impact.

EOS – Simulation Advances Industrial Additive Manufacturing

Additive Manufacturing

EOS and Additive Works present Amphyon software for simulation aided additive manufacturing / decreased development costs and increased part quality. The company’s focus their cooperation on the simulation based pre-processing software Amphyon: A solution which simulates the AM building process before it actually takes place, highlighting and optimizing possible problematic areas of the part to be built.

EOS 43

Save Time, Money, and Headaches at a SOLIDWORKS Simulation 2017 Event

Javelin Tech Tips

Join us at a SOLIDWORKS Simulation 2017 Canada Event to learn how the new SOLIDWORKS Simulation 2017 Suite will help you to shorten your design cycles, reduce costs, and design better products! At a SOLIDWORKS Simulation event you will learn: Is the stress actually that high?

30 Minutes to Smarter Design Decisions with SOLIDWORKS Simulation

Fisher/Unitech

In the past 20 years, I have worked in manufacturing, product design and as a consultant/applications engineer for several simulation software companies. Finally, we will describe Fisher Unitech’s broad array of services that can help you get the most from SOLIDWORKS Simulation.

Real Story of Design Failure and Redesign Using SOLIDWORKS Simulation

CADD Edge

Simulation Verification for Laird Technologies. To test this with SOLIDWORKS Simulation, we used linear dynamic harmonic tests to obtain the maximum possible acceleration due to natural resonance. Without SOLIDWORKS and Simulation, this would not be possible.

SOLIDWORKS Simulation 2018: Mesh Refinement for Stress Singularities Hot Spot Diagnostic

Javelin Tech Tips

They are visible where there are changes in geometry, such as a presence of a hole in a plate, at boundaries where different materials are present, and at points where bodies come into contact. Now in SOLIDWORKS Simulation 2018, stress singularity detection tool is added.

SIMULATION as a 3D Engineering tool: Customer story of TELSONIC

The Solidworks Blog

Every time I present SOLIDWORKS Simulation around the world, Im talking about the design process and how the product engineers can use virtual simulation as an engineering tool. Customer Stories Design SOLIDWORKS Simulation customer stories FEA TELSONIC