Essentium Helps State of Texas Increase PPE Supply

Additive Manufacturing

AUSTIN, Texas, June 24, 2020 – While the State of Texas is less impacted than many other states with significant urban populations, continuing to maintain the relatively low coronavirus infection rates will be vital as its citizens return to more normal activities, and as businesses re-open.

Texas 63

Texas A&M Researchers: Eliminating the Weak Spots in 3D Printing

Researchers at Texas A&M, working with scientists from Essentium, Inc., continue to refine 3D printing processes. 3D Printing 3D Printing Bond Strength 3d printing research Carbon Nanotube-Loaded Interfaces texas a&mPinpointing one of the most vulnerable areas, the individual printed layers, the. View the entire article via our website.

Texas 51

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

University of Texas at Dallas develops micro metal 3D printing process for in-situ microstructure control

3D Printing Industry

A team of researchers at the University of Texas at Dallas Department of Mechanical Engineering have invented an electrochemical-based metal 3D printing method. Named localized pulsed electrodeposition (L-PED), with this method the team has gained in situ control of metal microstructure during the printing process. Free from post-processing too, L-PED enhances the mechanical and electrical […].

NVision Scans Rare Prehistoric Fossils for Texas Museum

Additive Manufacturing

Southlake, Texas; December 4, 2019 — It roamed Texas long before the first dinosaurs. a leader in 3D non-contact optical scanning/measurement, for the Texas Through Time museum in Hillsboro, Texas. For more information about Texas Through Time, visit [link].

Texas 78

University of Texas at El Paso: 3D Printed Electrodes Show Promise Via DLP Processes

In ‘3D Architecture Electrodes for Energy Storage Applications,’ Seong hyeon Park explores the demand for harnessing and keeping energy, and especially on the micro-scale. Although micro-scale. View the entire article via our website. 3D Printing 3D printed electrodes 3D printed energy storage

Bright lights of 3D printed lithium-ion batteries demonstrated by DukeU and Texas State

3D Printing Industry

Using a desktop 3D printer and PLA filament, researchers at Texas State University and Duke University, North Carolina, have found a cost-effective way of fashioning LIBs into wearable devices and coin cell batteries. A study of the process has been […]. Cruz Rita Somogyi Sibo Niu Texas State UniversityAlready incredibly versatile, rechargeable lithium-ion batteries (LIBs) are reaching new levels of flexibility thanks to 3D printing.

Texas 67

Essentium and Texas A&M University Set ‘Helmet of the (not too far in the) Future Challenge’

Additive Manufacturing

Pflugerville, Texas, October 8, 2019 – Essentium Inc. together with Texas A&M University today announced The Essentium 3D Printed Scooter Helmet of the Future Challenge. Vela Texas A&M UniversityWinning Design to be Prototyped Using Essentium HSE 3D Printing Platform.

Texas 70

America Makes Announces Its Second Satellite Center to be Located on the Campus of Texas A&M University

Additive Manufacturing

America Makes proudly announces its second America Makes Satellite Center to be located within the facilities of the Institute’s Platinum-level member, the Texas A&M Engineering Experiment Station ( TEES ), a part of The Texas A&M University System , in College Station, Texas. Texas A&M Engineering Vice Chancellor and Dean of Engineering and National Labs; and Dimitris Lagoudas, Ph.D., About the Texas A&M Engineering Experiment Station (TEES).

Texas 40

Carl Deckard, the inventor of SLS, passes away

3D Printing Industry

A pioneer within additive manufacturing holding 27 patents, Deckard, supported by Dr. Joe Beaman, developed the SLS process as a student at the University of Texas at Austin […].

Real-time metal 3D printer monitoring at El Paso awarded in $900K ARL grant

3D Printing Industry

Two metal 3D printing projects at the University of Texas at El Paso (UTEP) have been awarded funding in a nine-hundred thousand dollar grant from the U.S. With problem-solving objectives, the projects look to develop a method of monitoring and auto-correcting powder-bed fusion based processes, and to enhance the mechanical properties of […]. Army Researchers Laboratory University of Texas at El Paso UTEP W.

America Makes Congratulates The University of Texas at El Paso (UTEP) and Its W.M. Keck Center for 3D Innovation on Partnership with Aconity3D

Additive Manufacturing

America Makes proudly extends its congratulations to The University of Texas at El Paso ( UTEP ), a Platinum-level member of the Institute, and UTEP’s renowned W.M. About The University of Texas at El Paso (UTEP). Located at the University of Texas at El Paso, the W.M.

EOS, Leader in Industrial 3D-Printing Technology, Expands U.S. Presence with Opening of New Facility in Texas

Additive Manufacturing

PFLUGERVILLE, Texas—May 04, 2016–( BUSINESS WIRE )– EOS , the global technology and quality leader for high-end solutions in additive manufacturing (AM), held a ribbon cutting ceremony today to mark the grand opening of their newest U.S. facility in Pflugerville, Texas.

Texas 79

3D Printing News Briefs: September 15, 2017

Just like earlier this week, today’s edition of 3D Printing News Briefs is bringing you the latest business news from the 3D printing world. We’ve got an update on the TU Eindhoven 3D. View the entire article via our website.

UTEP creates “world first” volumetric circuit with automated 3D printing

3D Printing Industry

The Electromagnetics and Photonics Lab (EM Lab) of the University of Texas at El Paso (UTEP) has developed an automated process for 3D printing electronics. Rumpf Electronics EM Lab Gilbert Carranza Ken Church Nano Dimension nScrypt Raymond Rumpf simon fried The University of Texas at El Paso Ubaldo Robles UTEP volumetric circuit

SprintRay introduces Pro95 esktop dental 3D printer, technical specifications and pricing

3D Printing Industry

A successor to the MoonRay S Digital Light Processing (DLP) machine, the Pro has over double the print capacity. 3D Printers Amir Mansouri MoonRay S Pro Desktop Dental 3D Printer SprintRay Texas Instruments

TWI secures additive manufacturing facility qualification from Lloyd’s Register

3D Printing Industry

The audit assessed the design, manufacturing, post-processing, and inspection of components produced using the EOS M 290 metal powder bed fusion system at TWI’s facility. […]. Business David Hardacre EOS Lloyd's Register Paul Goodwin Texas A&M University TWIBritish technology consultant TWI has received a signed AM facility qualification from certification organization Lloyd’s Register (LR).

RAPID+TCT 2018 in Review: Industry innovation in materials and processes

3D Printing Industry

This year’s event in Fort Worth, Texas showcased more than 300 exhibitors and 150 technical talks to thousands of attendees. The 2018 RAPID+TCT Conference has come and gone as another strong demonstration of the growth present in the 3D printing industry. With industry-wide growth estimated between 21% and 25% annually, the $10 billion dollar mark […].

In-situ 3D printing to make bone grafts as easy as a trip to the dentist

3D Printing Industry

In the future, researchers hope to be able to produce 3D printers that can actively contribute to a patient’s healing process. Research 3D Bioprinting Azhar Ilyas bone grafts cell scaffolds in-situ 3D printing Philip Roger Kramer scaffolds Taha Azimaie TAMU Texas A&M University Venu G. Though relatively conceptual at this stage, in-situ 3D printing directly at the point of an injury is currently undergoing research for its ability to rejuvenate the skin.

Linde Introduces Two Portfolios for Quality Powder Metal Processes

Additive Manufacturing

Texas, Linde LLC will showcase two new portfolios for improving the quality of powder metal (PM) sintering, Metal Injection Molding (MIM) and additive manufacturing (AM) processes. The ADDvance ® AM technology for improving quality before, during and after AM processing.

DSM and AMT Partner to Optimize Materials and Post-Processing to Offer Integrated Solutions to Customers Globally

Additive Manufacturing

Together, DSM and AMT will focus efforts on accelerating the adoption of additive manufacturing by offering customers solutions that include DSM’s filament and powder materials and AMT’s post-processing technology.

3D Printing Research CrAMmed: Penn State, University of Bristol, UNM and Sandia National Laboratories

3D Printing Industry

In this edition of CraAMed, we see how researchers are reviewing, and improving 3D printing processes including 4D printing and 3D bioprinting. New applications are also explored, leading down new avenues in drug screening, and important discoveries from beneath the ocean.

Rice University lab creates temperature-controlled 4D printing method

3D Printing Industry

Researchers from Rice University in Houston, Texas, have developed a new method for enabling increased control over shape-shifting materials in 4D printing, thereby making the process more practical.

For Hope & Faith: The Power of 3D Printing Helps Separate Conjoined Twins

Often, we talk about many new innovations and processes in manufacturing that would simply not be possible without the power of 3D printing behind them. 3D Printing Health 3D Printing 3d printed medical devices 3d printed medical model 3d printed models conjoined twins ct scan Radiological Society of North America Texas Children's Hospital

Thermo Scientific Explorer 4 Additive Scanning Electron Microscope Delivers First Dedicated Solution for 3D Printing Process Control

Additive Manufacturing

The new Explorer 4 Additive solution will be demonstrated at Rapid + TCT 2018 (booth 625) in Fort Worth, Texas, April 24-26, 2018. High-resolution imaging and elemental analysis permit fast, accurate characterization of powdered raw materials and inspection of finished parts.

America Makes Welcomes UTEP’s Retiring President, Dr. Diana Natalicio, to Youngstown

Additive Manufacturing

America Makes proudly welcomed Dr. Diana Natalicio, President of The University of Texas at El Paso ( UTEP ) on her visit to the Institute August 1 st , before her retirement later this month. Keck Center for 3D Innovation Located at the University of Texas at El Paso, the W.M.

SME 2017 International Honor Awards Recognize Manufacturing Executives, Researchers

Additive Manufacturing

SME International Honor Award winners are recognized for their significant contributions in the areas of manufacturing technologies, processes, technical writing, education, research and management, and service to SME. DEARBORN, Mich.,

SME’s AeroDef Manufacturing 2020 to Take on Rapid Growth, Advanced Manufacturing, Cybersecurity Topics in Fort Worth on March 16-19

Additive Manufacturing

To grow from the current 20,000 aircraft to 40,000, a tremendous amount of throughput must occur, forcing our industry to embrace higher-volume advanced processes and materials, including more use of automation.

America Makes – The Institute and Its Membership Community Welcomes 11 Additive Manufacturing Leaders to Serve in Advisory Capacity

Additive Manufacturing

TRX will be held on March 3-4, 2020, in College Station, TX, hosted by Texas A&M Engineering Experiment Station (TEES), a part of The Texas A&M University System, and the home of America Makes’ second Satellite Center. TRX will be held at the Center for Infrastructure Renewal (CIR) on the RELLIS Campus of The Texas A&M University. Youngstown, Ohio — February 20, 2020.

Ohio 40

Essentium and LEHVOSS develop PEEK and HTN materials for FFF 3D printing

3D Printing Industry

the Texas-based 3D printer manufacturer behind High Speed Extrusion (HSE) technology, has announced a partnership with chemical and mineral materials specialist LEHVOSS Group to develop high-performance materials for additive manufacturing. Essentium Inc.,

Texas 64

America Makes Announces Its Third Satellite Center to be Located at the National Institute for Aviation Research (NIAR) on the Campus of Wichita State University

Additive Manufacturing

Keck Center for 3D Innovation on the campus of the University of Texas at El Paso (UTEP). Most recently in March 2019, America Makes announced that its second Satellite Center would be located at the Texas A&M Engineering Experiment Station (TEES), a part of The Texas A&M University System, in College Station, Texas. The Satellite Center model is incredibly important for us at Texas A&M. and are proud to do so within the state of Texas.

SME, Stratasys Announce Winners of FANUC-Inspired SkillsUSA Additive Manufacturing Competition

Additive Manufacturing

Through SkillsUSA’s championships program and curricula, employers have long ensured schools are teaching relevant technical skills, and with SkillsUSA’s new redentialing process, they can now assess how ready potential employees are for the job.

Omaha 52

Essentium and LEHVOSS Group Developing High-Performance Materials for Industrial-Scale 3D Printing

Texas startup Essentium Inc., a materials and 3D printer OEM, is always looking to disrupt traditional manufacturing processes with industrial AM solutions by combining production speed and product.

Texas 61

UTEP Will Be a Leader in 3D-Printing Data Collection Under Expanded Partnership with America Makes

Additive Manufacturing

Newswise, November 7, 2018 — The University of Texas at El Paso ( UTEP ) will be a pivotal leader in the collection of critical performance data for the 3D-printing industry while offering immense benefits to students through an expanded agreement with America Makes.

3D Printing and Public Education Join Forces to Create Tactile Learning Objects for Students With Total or Partial Blindness


We spoke with University of Texas at El Paso biologist Dr. Michael A. He taught for over forty years and received Distinguished Teaching Award at the University of Texas at El Paso. Could 3D printing launch a revolution for 285 million people with total or partial blindness?

ADAPT Welcomes New Member Concept Laser

Additive Manufacturing

headquarters in Grapevine, Texas. “We’re is headquartered in Grapevine, Texas and is a US-based wholly owned subsidiary of Concept Laser GmbH. ADAPT uses these tools to help industry and government qualify, standardize, assess, and optimize advanced manufacturing processes and parts.

Texas 65

HOUSTEX 2017: Cybersecurity, Manufacturing Skills Gap, Automation, Oh My!

Additive Manufacturing

John Romero, program director of the Knowledge Engineering Center at Texas A&M Engineering Extension Service, will discuss the importance of emphasizing and integrating cybersecurity awareness. HOUSTON, Feb. 14, 2017 – SME’s HOUSTEX event returns to the George R.

Conjoined Twins Can Live Separate Lives Thanks to 3D Printing Technology


Doctors at Texas Children’s Hospital experienced this first hand on February 17 th when they separated 10-month-old twins Knatalye Hope and Adeline Faith Mata during a 26-hour-long surgery. Image courtesy of Texas Children’s Hospital. Image courtesy of Texas Children’s Hospital.

Texas 110

America Makes Announces Awardees of $8M in Funding for Project Call #3

Additive Manufacturing

The Institute’s third project call, which was released in February 2015, was focused on five technical additive manufacturing topic areas—design, material, process, value chain, and genome—each with subset focus areas.

Additive Manufacturing Users Group Announces 2018 Scholarship Recipients

Additive Manufacturing

Daniel Delgado Camacho, who is pursuing a master’s degree in Structural Engineering at the University of Texas at Austin (UT Austin), has been awarded the Guy E. This led to his research of AM for fabrication of connections using the material extrusion process.

New 3D printing materials from BASF and Essentium Materials

3D Printing Industry

The company is collaborating with Essentium Materials, the Texas-based creator of the FlashFuse FDM electric welding process, to create new filaments under the “Ultrafuse” name as […]. BASF 3D Printing Solutions is a subsidiary of BASF SE, the largest chemical producer in the world, focusing on expanding the company’s materials, components and service offerings for 3D printing.

Texas 79

ASTM International-New Powder Bed Fusion Specification Approved by ASTM International Additive Manufacturing Committee

Additive Manufacturing

Properties include mechanical, tolerance, surface finishing and post-processing. director of the Laboratory for Freeform Fabrication, University of Texas at Austin. on Materials and Processes, part of ASTM International Committee F42 on Additive Manufacturing Technologies.

Sintavia and Howco sign agreement to further 3D printing in oil & gas industry

3D Printing Industry

Sintavia, a Florida-based metal 3D printing service, has signed a term sheet with Texas-headquartered metal alloys specialist, Howco, to advance additive manufacturing in the oil and gas sector. Brian Neff, Chairman and CEO of Sintavia, said, “Many of the proprietary additive manufacturing processes that Sintavia has developed for the Aerospace & Defense industry apply equally […].

CELLINK and Volumetric introduce Lumen X 3D bioprinter for larger vascular structures – Technical specifications

3D Printing Industry

CELLINK, the Swedish manufacturer of the BIO X 3D printer, and Volumetric a Texas-based biomaterials and biomanufacturing company, have introduced the Lumen X Digital Light Processing (DLP) bioprinter to produce large vascular structures. Designed as an entry-level platform, the Lumen X works with patent-pending bioinks to print high-resolution, macroporous, and vasculature structures, strengthening research regenerative medicine. […].

Texas 51