Wohlers Report Published

Wohlers Talk

I’m happy to announce that Wohlers Report 2016 was published this week. It is the 21st annual edition of our state of the industry report on additive manufacturing and 3D printing. Senior consultant and principal author Tim Caffrey was vital to this year’s report (once again).

Customizing SOLIDWORKS Inspection Reports – Part 1

DASI Solutions

An Introduction to SOLIDWORKS Inspection Report Editor Written by: Gordon Pursel, Application Engineer SOLIDWORKS Inspection can streamline the FAI ballooning and reporting process, but you can also further customize the Excel based FAI reports for both requirements and company standards.

Trending Sources

Wohlers Report 2017: The Real Authority on 3D Printing

3DPrint.com

3D Printers 3D Printing 3D Printing Materials Business Metal 3D Printing 3D printer reports 3d printing analysis 3D printing forecast 3d printing industry analysis 3d printing industry projections 3d printing market reports 3d printing projections 3d printing report 3D printing reports market forecast Terry Wohlers Wohlers Associates Wohlers Report 2017

New report: Driving Innovation in redistributed manufacturing

Capturing the Value

The final project report from the feasibility study led by Dr Paolo Aversa at Cass Business School and Dr Sebastiano Massaro at Warwick Business School is now online. Driving Innovation in redistributed manufacturing: A feasibility study in the motorsport industry ” describes results of their work undertaken during 2016. The results of this project were presented at the 3DP-RDM event 3D Printing Where and How on 31st January 2017 at the IfM in Cambridge.

Arcam updates branding, releases Annual Report

3D Printing Industry

Swedish 3D printing company Arcam has released its Annual Report for 2016 and updated its branding identity. Business arcam Arcam 2016 Arcam AB Arcam annual report Arcam branding Arcam financials Arcam GE Arcam logoHaving been acquired by GE late last year, Arcam has.

Arcam 21

New report: Supporting SMEs in creating value through 3D printing re-distributed manufacturing

Capturing the Value

The final project report from the feasibility study led by Dr Peter Dorrington at PDR, Cardiff Metropolitan University is now online. The aim of this report is to present a feasibility study which investigates the key challenges faced by small and medium-sized enterprises (SMEs) to create value through 3D printing-enabled re-distributed manufacturing (3DP-RDM).

Sculpteo Releases Their New Industry Report “State of 3D Printing”

3DPrint.com

Calling it a diagnostic on the state of 3D printing, Sculpteo has leveraged their status as one of the largest 3D printing service providers in the industry to compile a comprehensive, in-depth report on... View the entire article via our website. 3D Printers 3D Printing 3D Printing Materials Business 3d printing industry analysis industry report sculpteo State of 3D Printing wohler's report

3D Hubs Releases Worldwide 3D Printing Trends Report for February 2016

3DPrint.com

As you gasp with surprise that the second month of a new year is actually already upon us, we bring you the latest from 3D Hubs with their Worldwide 3D Printing Trends Report for February 2016. View the entire article via our website.

22nd Annual Wohlers Report

Wohlers Talk

I’m happy to announce this week’s publication of Wohlers Report 2017. Our international network of friends, associates, and business contacts is what makes the report possible. I appreciate everyone that played a part in producing and delivering Wohlers Report 2017.

3D Printing Production Planning Report

Capturing the Value

The final project report from the feasibility study led by Dr Martin Baumers at the University of Nottingham is now online. “ In this report we summarise the findings of a project which establishes an understanding of the relationship between the commercial performance of 3DP and the characteristics of its operation through the development of a demonstrator system.

3D HUBS Releases May’s 3D Printing Trend Report, Return to Glory for Some

3DPrint.com

3D Printers 3D Printing 3d hubs 3d hubs report 3d hubs trend report 3d hubs trends 3d print trends 3d printing news 3d printing trendsMay approaches, bringing a new season and a sigh of relief as some of us dig our way out of the snow, and others begin to dip their toes back into the pool and... View the entire article via our website.

Reducing Cost of Quality for Consumer Packaged Goods (survey report)

Tech Clarity

The Reducing Cost of Quality in CPG report shares perspectives from a survey of over 175 CPG companies to determine how Top Performers manage consumer packaged goods quality. The report analyzes their processes, organizational structures, and enabling.

The economics of 3D Printing report

Capturing the Value

The final project report from the feasibility study led by Dr Martin Baumers at the University of Nottingham is now online. In this report we present the findings of a project aiming to develop our understanding of the underlying economics. The key methodologies employed in the analysis of LS, together with reached results, are presented in this report.

LUXeXceL Releases Report Establishing Benchmarks for 3D Printing Transparent Materials

3DPrint.com

3D Printing Business 3d printed lenses comparative research data analysis lens lenses light diffusion light transmission luxexcel research research and development research report transparency transparent 3d printingWe’ve had our eye on LUXeXceL for some time now here at 3DPrint.com, covering their innovative use of transparent 3d printing. The Dutch company, founded in 2009, focuses on the 3d printing of products... View the entire article via our website.

Four Key Takeaways from the Wohlers Report 2015

Stratasys

It’s not easy to summarize a 300+ page report in the span of a blog post, especially one as thorough and educationally deep as Wohlers Report 2015 on the state of the 3D printing industry. We outlined some of the key takeaways from the report below.

AMR Report Says 3D Camera and Content Markets Will Reach $7.6 Billion by 2020

3DPrint.com

3D Printing 3D Scanners Business 3D camera market report 3d printing business opportunities 3d scanner market Allied Market Research Asia Pacific Kinematascope research reports Stereoscope As modern as 3D technology now seems, you can actually look back to 1844 for the birth of the process. At that early date, David Brewster created a device called the Stereoscope which was capable... View the entire article via our website.

David 43

SmarTech Report: 3D Printing in Dental Market to Reach $3.1 Billion by 2020

3D Printing Industry

Over the last few months, SmarTech has published three reports focusing particularly on the three industries where 3D printing is widely expected to see rapid and real, transformational growth – jewellery, medical, and dental. By Tarun Tampi.

Wohlers Report 2016 Published: Additive Manufacturing Industry Surpassed $5.1 Billion

Additive Manufacturing

recognized widely as the leading consulting firm and preeminent authority on additive manufacturing and 3D printing worldwide—terms that are used interchangeably—today announced the publication of the Wohlers Report 2016. Terry Wohlers Tim Caffrey Wohlers Associates Wohlers Report 2016

3D Hubs Releases Worldwide 3D Printing Trends Report for July 2016, Format Goes Quarterly

3DPrint.com

3D Printers 3D Printing 3d hubs 3d hubs trend report 3d hubs trends 3D printer reports 3D printing events calendar 3d printing industry trends worldwide 3D printing reports 3d printing trend report 3d printing trends industrial 3d printers popular 3D printing colors trending desktop 3D printers Worldwide 3D Printing Trends Report Worldwide 3D Printing Trends Report for July 2016

Stratasys reports HP veteran Chris Morgan joins the company

Leslie's Blog

As a senior vice president of HP’s multi-billion dollar graphics solutions business in the Printing and Personal Systems Group, Morgan was responsible for several thousand employees worldwide and helped drive HP from challenger to established market leader,” says Stratasys Executive Vice President, Dan Yalon, whom Morgan will report to.

Research Report Predicts Market for 3D Printed Precious Metals Components Will Reach $4.1 Billion by 2024

3DPrint.com

SmarTech Markets Publishing provides market research and industry analysis in the 3D printing and additive manufacturing sectors, and a recent report from the company says they expect the market for 3D printed precious metals... View the entire article via our website.

Grab a Coffee – 3D Hubs’ June Trend Report is Here

3D Printing Industry

With June upon us, 3D Hubs has released its latest trend report, giving us an up-to-date snapshot of the shifts it has observed in its global network.… … The original post Grab a Coffee – 3D Hubs’ June Trend Report is Here appeared first on 3D Printing Industry. 3D Content 3D Printers 3D Printing 3DP Services News ReportBy Tarun Tampi.

Voxeljet AG (NYSE:VJET) Reports Third Quarter 2014 Results, Lowers Guidance

3DPrint.com

After a mediocre report by Stratasys last week, followed by 3D Systems reporting numbers better than expected on Monday, and ExOne giving the... View the entire article via our website. This has been a very busy week for 3D printing-related stocks.

CEA Reports Future Growth and $$$ in Consumer 3D Printing

3D Printing Industry

According to a report from the Consumer Electronics Association (CEA), the group behind the enormous International Consumer Electronics Show held in Las Vegas every year, about 76% of 3D printer owners use their machines daily or several times a week. 3D Printing Business Industry news Repor

3D Hubs Releases Worldwide 3D Printing Trends Report for August 2015

3DPrint.com

3D Printers 3D Printing 3d hubs 3d hubs trend report 3d printing trends 3dhubs august 2015Now with over 20,000 3D printers stationed throughout the world, 3D Hubs has fully established themselves as an affordable and quick way to have your designs 3D printed. Each and every month, the company... View the entire article via our website.

3D Hubs Releases Worldwide 3D Printing Trends Report for September 2015

3DPrint.com

3D Printers 3D Printing Business 3d hubs 3d hubs trend report 3d hubs trends 3d printing analysis 3d printing report 3d printing trendsIt’s all in the details. The statistical details that is. Add some colorful graphs, and when it comes to finding out what’s new in the 3D printing industry, we’re gobbling it up greedily on... View the entire article via our website.

3D Hubs Releases Worldwide 3D Printing Trends Report for July 2015

3DPrint.com

3D Printers 3D Printing Business 3d hubs 3d hubs trend report 3d hubs trends 3d printing trendsEvery month, 3D Hubs, a platform which connects 3D printer owners with people locally who need something printed via hubs, pull together data they gather from their network of individuals and companies who use... View the entire article via our website.

3D Hubs’ October Report Analyzes Crowdfunding

Fabbaloo

We always watch for 3D Hubs monthly report as it provides insight into use of 3D printing. But this month’s report includes some very interesting analyses. One other interesting observation from their monthly report is the increase in “professional” machines.

Arcam AB Reports Strong 2014 Year-End Financials

3DPrint.com

3D Printing Business (ARCM.ST) 2014 financial reports 3d printing stocks 3d printing sweden arcam AB arcam stock ebm electron beam manufacturing Not every company involved in additive manufacturing is disappointing the markets this week. Following a warning on Monday by 3D printing giant Stratasys, analysts and investors seem to have soured to stocks within this industry, with shares... View the entire article via our website.

Arcam 34

Report from Local Nexus Launch Event

Capturing the Value

A report summarising these discussions is now available online here. Event Local Nexus localisation re-distributed manufacturing scoping workshop energy food launch event local nexus report University of Oxford water3DP-RDM is one of six re-distributed manufacturing networks currently being funded by the EPSRC and ESRC. On 23 March one of our sister networks, the Local Nexus Network , ran a launch event and scoping workshop in Oxford.

Materialise Announces New Aluminum Alloy 3D Printing Material as They Report Quarterly Earnings

3DPrint.com

3D Printing 3D Printing Materials Business (NASDAQ:MTLS) 2014 financial reports 3d print aluminum 4th quarter earnings aluminum alloy materialise materialise 4th quarter 2014 materialise stock mtls Within the 3D printing space, materials really are everything. If we were only able to print using thermoplastics, the industry would never have taken off. Although thermoplastics and thermoplastic composites rule the consumer side... View the entire article via our website.

3D Hubs Releases Worldwide 3D Printing Trends Report for December 2015

3DPrint.com

December is upon us and holiday shopping is in session all around the world, making this month’s 3D Hubs Worldwide 3D Printing Trends Report and its data something we hold even closer than. 3D Printers 3D Printing 3d hubs 3D Hubs 2016 Printer Guide 3d hubs trend report 3d printing analysis 3D printing reports 3d printing trend report 3d printing trends top 3d printers Worldwide 3D Printing Trends Report Worldwide 3D Printing Trends Report for December 2015

5 3D Printing Takeaways from the Latest Wohlers Report

3D Printing Industry

Recently, 3DPI announced a distribution agreement with Wohlers Associates to sell the Wohlers Report 2014, an in-depth analysis of the current progress being made in the 3D printing industry. 3D Printing Industrial Report By 3D Printing Industry.

GE Reports-This Electron Gun Builds Jet Engines

Additive Manufacturing

About GE Reports. GE Reports is a daily, award-winning online magazine published by GE. Featured News Arcam Avio EBM Electron Beam Melting GE GE Aviation GE Reports GEnx jet engine Gregg Morris

3D Hubs Releases Worldwide 3D Printing Trends Report for June 2016

3DPrint.com

3D Printers 3D Printing Business 3d hubs 3D Hubs Monthly Worldwide 3D Printing Trends Report 3d hubs trend report 3d hubs trends 3D printing events calendar 3d printing trend report 3d printing trends 3D Printing Trends June 2016 industrial 3d printers popular 3D printing colors trending desktop 3D colors worldwide 3D printing

KPMG industry 4.0 report urges companies to “be bolder” with digital manufacturing

3D Printing Industry

Professional service company and auditor KPMG has released a report aiming to debunk myths about the progress of Industry 4.0 i4.0), and encourage more manufacturers. Business cyber physical systems digital digital manufacturing digital twin Doug Gates factory of the future fourth industrial revolution i4.0 industry 4.0 Industry 40 machine learning Michael Bremicker Smart Factories smart factory supply chain

Anonymous Source: 3D Systems Reportedly Shutting Down Andover, MA Facility

3D Printing Industry

… The original post Anonymous Source: 3D Systems Reportedly Shutting Down Andover, MA Facility appeared first on 3D Printing Industry. By Michael Molitch-Hou.

Terry Wohlers Reports on the State of Additive Manufacturing at Inside 3D Printing Seoul

3DPrint.com

eyewear hp Inside 3D Printing Seoul Terry Wohlers wohler's report Wohlers AssociatesTerry Wohlers, Principal Consultant and President of Wohlers Associates, has been covering the 3D printing industry since 1986, the same year that Chuck Hull started the first commercial 3D printing company, 3D Systems. Saying... View the entire article via our website.

Additive Manufacturing Industry Insight From The 2016 Wohlers Report

3D Innovations

The highly anticipated Wohlers Report 2016 has been released and is full of insightful data into the additive manufacturing (3D printing) industry. This annual state-of-the-industry report is sought-after by industry insiders and outside industry observes alike. For Wohlers Report 2016 , input was collected 98 service providers, 51 system manufacturers, 15 third-party material producers, and the valuable contributions of 80 co-authors in 33 countries.”

3Diligent to Publish State of Professional and Industrial 3D Printing Report

3DPrint.com

3D Printing 3D Printing Materials Business Metal 3D Printing 3D metal printing report 3D printing industry reports 3d printing market reports 3d printing marketplace 3d printing report 3D printing with metal 3diligent 3Diligent State of Professional and Industrial 3D Printing Report Cullen Hilkene metal 3d printing State of 3D Printing3Diligent has been noted for their unique role in the 3D printing industry, connecting clients and vendors.